2010 EJN/NTC UNCLAIMED ARROWS: EASTON ARROWS: X

2010 EJN/NTC UNCLAIMED ARROWS:
EASTON ARROWS:
X-10 600 C-3: 3 white spin wings, orange small groove pin nock, JH on shaft
2 arrows: A/C/E 620 C-4: 3 black shield cut vanes green small groove pin nocks: two of these, same everything
A/C/E 670 C-2: 3 black spin wings, green small groove g-nock, AL on shaft
A/C NAVIGATOR 540: 2 green, 1 purple DURAVANES , Yellow Beiter 95x2 nock
A/C/C Series DF, 2-04/920: DayGlo Orange Kurly Vanes, MISSING NOCK, NO other markings on arrow
REDLINE 520: 2 red, one yellow parabolic vanes, orange small groove g-nock “AG” on shaft
CARBON EXPRESS ARROWS:
Medallion-XR 700: 2 green, one red DURAVANES, Ruby CX pin nock
NANO-PRO 450: blue glitter arrow wrap, 3 clear shield cut vanes, CX450 pin, green (g-nock type?) nock
2 arrows: NANO-PRO 500: orange and black zebra arrow wraps, 3 blue parabolic vanes, green CX(?) pin nocks, “BL” on wrap
MC KINNEY ARROW:
210: two white k-spin SuperFlonite vanes (maybe was three, but one is missing), ruby Beiter overnock, “LM(?)” on shaft
2012 EJN/NTC UNCLAIMED ARROWS:
EASTON ARROWS:
X-10 830 C-2: 2 white, 1 yellow spin vanes, green small groove pin nock
A/C/E 1100 C-6: 3 blue holograph Kurly Vanes, blue pin nock, “KY” on shaft, white dot at cock vane, arrow number 11 in
white circle decal
A/C/E 1000 C-7: 3 black spin wings, ruby small groove g-nock, “EX” on shaft above vanes, arrow number “3” in silver paint
pen
A/C/E 850 C-4: 3 blue shield cut vanes (flex fletch?), white large groove g-nock
2 arrows: A/C/E 780 C-4: 3 blue spin wings, ruby small groove g-nock, “TERRI” (with a pink heart after the arrow name),
black dot in the nock end box and number 10 written to the right, also arrow number 7.
A/C/E 780 C-4: 3 white spin vanes, ruby small groove pin nock.
A/C/E 620 C-2: 3 yellow Easton vanes, red pin nock, “JS”(?) faded on shaft
A/C/E 570 C-4: 3 black spin wings, ruby small groove g-nock, “EPI” in initial boxes
A/C/E 430 C-3: 3 orange shield cut vanes, number 8 on one, and “BP” on another , orange Beiter “PIN2” nock
A/C/C D5 2-00/1500: 3 white spin wings, orange small groove g-nock, “KC” on shaft in silver
2 arrows: A/C/C DF 2-04/920: 3 parabolic orange vanes, black small groove g-nock, “B” in silver between vanes and nock
A/C/C D4 3-00/1150: 3 red-orange parabolic vanes, ruby small groove g-nocks, “ALLAN” on shaft, “MAE” by Easton Decal
A/C/C DK 3-04/680: 3 parabolic red-orange vanes, green small groove g-nock, “BVR” in silver just below vanes, #11 between
vanes and nock
A/C/C DN 3-28(maybe 26?)/500: 2 black, one green parabolic vanes, green large groove g-nock, “CLA or CLR(?)” and #4,
between vanes and nock
A/C/C DQ 3-39/440 1 white, 1 blue VaneTec parabolic vanes (one missing), orange large groove g-nock, “JVJ” in silver
between vanes and nock
A/C/C DM 3-28/500: 3 yellow spin vanes, black large groove g-nock, #6 in gold circle decal, faded B in gold on shaft
*This label is very worn off: A/C/G 610 C-7: 3 red spin wings, ruby small groove g-nock, “D.R” below vanes, DR 08 BAR
below vanes on other side of shaft
A/C/G 810 C3: 3 red spin wings, ruby pin nock “DT(?)” between vanes and nock
A/C/G 540 C3: 3 blue spin wings, fire orange Beiter “PIN2” nock
A/C/G 610 C2: 3 black spin wings, green large groove pin nocks, #1 below the vanes
CARBON ONE 660: 3 white spin wings, (some black markings on spin wings?) orange small groove pin nocks
GOLD TIP ARROWS:
PRO HUNTER 3555: 2 orange, 1 white GoldTip Vanes, GoldTip nocks, “MM” in pink between vanes and nock, arrows have
numbers 00000635 and 00000638 (looks like possible serial numbers issued by GoldTip?)
BEEMAN ARROW
CARBON FLASH (1000?): 3 neon yellow vanes, neon green Beeman ou
CARBON EXPRESS ARROWS:
NANO-PRO 550: 2 black, 1 green Easton shield cut vanes, 550 Pin, black Beiter “PIN2” nock
NANO-PRO 500: 3 orange shield cut vanes, #29 on one of them, 550 pin, ruby large groove pin nock
2013 UNCLAIMED ARROWS:
EASTON ARROWS:
X-10 550 C5: 3 red ELI vanes, red-orange Beiter “PIN1” nock
X-10 750 C3: 3 violet ELIZ vanes, green “PIN1” nock
X-10 410 C3: 2 yellow one black AAE Wav Vanes, orange small groove pin nock,
X-10 500 C4: 2 black spin wings (third is missing), red-orange Beiter “PIN1” nock
X-10 450 C4: 3 blue spin wings (they are torn up due to the miss!), orange large groove pin nock, “JRB” between vanes and
nock
X-10 500 C4: 3 black spin wings, red-orange Beiter “PIN1” nock,
3 arrows: A/C/E 780 C4: 3 white spin wings, red small groove pin nocks, some silver smudges as identifying(?) marks???
A/C/E 920 C6: 3 white spin wings, green Beiter “PIN1”nock, white arrow number circle decal #5
A/C/E 780 C-4: 3 black Easton parabolic vanes, green small groove pin nock
A/C/E 780 C4: 3 black Easton parabolic vanes, ruby small groove pin nock, faded “FH(?)” on shaft
A/C/E 670 C2: 3 green Easton parabolic vanes, black small groove g-nock
A/C/E 1250 C6: black spin wings, green small groove g-nock, “MW’ in silver on shaft
A/C/E 670 C3: 2 yellow, 1 green Easton shield cut vanes, ruby small groove g-nock “DK(?) AK(?) on shaft
A/C/E 780 C5: it appears there were yellow-green plastic vanes on, but all are gone now , blue pin nock
A/C/E 720 C5: 3 black spin wings, orange pin nock, “GC(?) or “YC(?)” on shaft
A/C/E 670 C2: 3 pink AAE Wav Vanes, green large groove pin nock, “EK” on shaft
A/C/E 720 C5: 3 white spin wings, ruby large groove g-nock, “TAG” in red in initial boxes
A/C/E 1000 C7: 3 DayGlo Yellow Kurly Vanes, ruby Beiter InOut nock
A/C/E 620 C4: 2 yellow Easton parabolic vanes, third one is missing, green small groove pin nock, “JS(?)” in silver on shaft?
A/C/G 540 C2: 3 shield cut vanes, blue large groove pin nock “FM” on shaft
A/C/C DL 3-18/560: 3 pink parabolic vanes, white large groove g-nock, “TM” on shaft
CARBON ONE 660: 2 red, 1 black AAE Wav Vanes, black small groove g-nock
CARBON ONE 660: 3 red (glittery sort of) shield cut vanes, green small groove pin nocks, “DV(?)” on shaft
CARBON ONE 810: 2 blue, 1 green shield cut vanes, green large groove pin nock, “E.A” on shaft
2 arrows: CARBON ONE 410: 2 yellow, 1 black shield cut vanes, red large groove pin nock
GOLD TIP ARROW:
ULTRALIGHT 500: 2 red, one white VaneTec vanes, blue GT pin nock, “FB” on red vane, and on shaft
CARBON EXPRESS ARROW:
PREDATOR 700: 3 white spin vanes, ruby Beiter InOut nock, “mbs” on shaft
QUEST ARROWS:
5 arrows (found on CLOUT field): ELITE THUNDER 40#-60#/.400: neon yellow & black zebra wrap,. Blue vanes, large
groove yellow-green nocks
Please contact Liz Coombe at [email protected] to claim these arrows.
Liz will be shipping arrows each Friday.