Steps to self-register your game devices:
Step 1:
Make sure you are connected to strose-gameconsole if using wireless or plugged into a wall jack if not.
Step 2:
Once on this screen, click the agree button.
Step 3:
Click on the Register your game
console link to bring you to the
next page.
Step 4:
Put in your user name and password.
For (1) MAC Address, you can only use
0-9 or A-F for characters. If you need
help finding your mac address, refer
to (4) for the device you need it for. If
your device is not listed, or the info
isn’t correct, just do a google search
for how to find the MAC address for
your particular device. Once you have
it, enter it on (1). Select the device
from the drop-down box on (2). When
complete, select (3) register.
Step 5:
From clicking register to this screen, it should be instantaneous. Once you get this screen, wait for the
progress bar to stop.
Step 6:
If you are redirected to the bottom page, then you are on the network. If you don’t get this page, go
back to step 1, turn wireless off, turn wireless back on and re-select Strose-Gameconsole or unplug
your cable and plug it back in. Then, go into your browser and see if you get webpages. If not, fill out
the form at http://netreg.strose.edu .