31
eifs catalog
www.demandproducts.com
CONTINUOUS INSULATION (CI)
SPECIAL FEATURE
Demand Products
Product Index
FASTENERS HOT KNIVES
RASPS
CHEMICALS
FOAM CUTTING
Page 6-11
Page 12-21
Page 26-29
Page 30-33
Page 52-57
Solutions in over 120 countries.
FOAM RECYCLING
WATER MANAGEMENT
MIXERS / SPRAYERS
HAND TOOLS
CRAFT HOT WIRE CUTTERS
How to Order
Our products are available through distributors located throughout
the world. If you cannot find a distributor in your area call or email
us at [email protected] and we will assist you in finding
one. Our operation hours are from 8:00 am to 5:00 pm Monday
through Friday, EST. Our fax machines & email operate around
the clock. FAX: I.888.534.8383 E-MAIL: [email protected]
Warranty
All of our products carry an unconditional 6 month guarantee, but
Demand must be notified within 48 hours of receipt of defective or
damaged merchandise or shortages. Any equipment or tools that are
disassembled without prior written consent from Demand Products
will have the warranty voided. Defective products will either be
replaced or repaired at no charge. Abused tools will be repaired and
returned only if the customer consents to charges in writing.
Return Policy
No merchandise can be returned without an authorization number.
We do not accept returns on chemicals or coatings. Returns must
be made within 15 days of invoice and must be in new condition.
Materials returned must be shipped prepaid. Discontinued items,
custom orders or items that have been out of our factory for 3
months or longer cannot be returned. Returns subject to minimum
15% restocking fee.
Page 58-59
Page 34-35
Page 24, 25 & 64
Page 40-51
Page 66-67
Please Note — Disclaimer
The products in this catalog are offered as options for the
purchaser. Having no control over the use of the products in this
catalog, we assume no liabilities connected with their use. Under
no circumstances are we or the seller liable for any loss, damage
or expense of any kind arising out of the use or inability to use
our products. The product descriptions and/or photos described
or shown may have changed since publication of this catalog and
therefore information may be outdated.
EIFS products in this catalog are sold through distributors or manufacturers only
All property rights are reserved. Having no control over the use of the products in this catalog, we assume no liabilities connected with their
use. Under no circumstances are we or the seller liable for any loss, damage or expense of any kind arising out of the use or inability to use
our products. Prices are subject to change without notice.
©2014 Demand Products, Inc. – Demand Products is a trademark of Demand Products, Inc., Alpharetta, GA 30004 USA
1.800.325.7540
EXPERT
ADVICE
DURARASPS
HOTKNIVES
HOTWIRE
MACHINES
BOW
CUTTERS
FASTENERS
CI
TOOL
FOAM
CUTTERS
New tools for meeting the new codes for more
energy efficient commercial buildings.
New legislation* setting higher national and state standards for energy efficiency and re-setting commercial building
energy codes in every state will create growing demand for continuous insulation (CI) products. We have the critical tools
and know-how for assembling the essential equipment for you to meet the increased demand for high-efficiency,
readily available insulation materials.
To learn more about CI materials & methods for meeting the demand from the change in national, state and local
building energy codes contact Demand Products at 1.800.325.7540 or [email protected].
* The U.S. Department of Energy (DOE) mandates all states must enforce a commercial building energy code
that meets or exceeds ASHRAE Standard 90.1-2010 effective Oct. 18, 2013.
Continuous Insulation (CI)
What is CI?
Continuous Insulation is different from what has been, more or less, the conventional approach of insulating
spaces between framing studs. Non-continuous insulation inevitably creates pockets and gaps and air leakage
resulting in ‘thermal bridging’ that can cost a typical steel frame wall up to 50 percent of its R-value and up to
24 percent or more of the R-value of a wood frame wall. Those losses are so great they can not be made up
(or meet the new code) simply by adding thicker cavity insulation. As you can see, Continuous Insulation
offers a significant savings and a dramatic solution for commercial buildings everywhere.
Continuous Insulation is made up of either Expanded Polystyrene (EPS) of Extruded Polystyrene (XPS)
CI Mandate Effects 90% of New US Building Sites
CODE REQUIRMENT: R-13 CAVITY BATT
+ R 3.8 CI OR + R 7.4 CI
CODE REQUIRMENT: R-13 CAVITY BATT
WITH NO CI
Web Resources for CI
www.ashrae.org
www.iccsafe.com
www.energycodes.gov
Demand Products CI Solutions
DP300CI and Zinc Coated Screw
Assembled with Washer for CI Installation
Item#
DPCI-0
DPCI-1
DPCI-15
DPCI-2
Size
1 1/4”
1 5/8 “
2”
2 1/2”
Description
Steel Screw w/ DP300CI
Steel Screw w/ DP300CI
Steel Screw w/ DP300CI
Steel Screw w/ DP300CI
DP300CI
Designed for all foams: EPS, XPS,
Pink & Blue Boards and PolyIso
Insulation
.625”
1“
1 1/2”
2”
Qty
1000
1000
1000
1000
CI Washers for Rigid and Soft Foam
Item#
DP300CI
DP400CI
Description
CI Washer
CI Washer
DP400CI
Designed for soft foams: EPS, PolyIso
Qty
1000
1000
Q&A
Why CI?
It’s a simple equation. Continuous insulation works. It works as an integral element in implementing Exterior
Insulation and Finish Systems (known as EFIS). Architects and developers have experience with EFIS as an
alternative or replacement for stucco. Now, they are recognizing how EFIS and utilizing continuous insulation
is a tremendous approach to meeting the new, higher energy efficient commercial building codes. Bottom line;
continuous insulation is an all-around winner.
US Department of Energy Mandate
US Department of Energy (DOE) mandated all affected states must update their commercial building
code to meet or exceed American Society of Heating, Refrigeration, and Air Conditioning Engineers
(ASHRAE) standard 90.1-2010
STEEL STUDS
INSULATION
exterior sheathing
interior drywall
EPS OR XPS BOARD
CI thickness minimum of .625”
(4.1 R-Value) up to 2” (13.0 R-Value)
maximum, board sizes from 2’ x 4’
up to 4’ x 12’
CI FASTENER
exterior cladding
Look for Icon for Specialized CI Tools
CI
TOOL
PBH & PB
PBH™ Washer
The Builder’s Choice
Available in Boxes
500 or 1000
• 2” Diameter
• Manufacturer Approved
• Cone Design Prevents Popups
• White — No Color Bleed Thru
• Finger Closures
• Eliminates Thermal Shorts
• Large Keyholes for Strong
Mechanical Bonding
Item #
Description
PBH
PBH Washer
PBH500 PBH Washer
Qty Per Box
Price
1,000
500
89.00
54.00
Fastener Patterns & Windload Specs on Pages 9,10 & 11
PB™ Washer
Polymer Based System Washer
• 2” Diameter
• Large Keyholes for Strong Mechanical Bonding
• White — No Color Bleed Thru
• Manufacturer Approved
• 20 Year Warranty
• Finger Closures
• Cone Design Prevents Popups
• Eliminates Thermal Shorts
Item #
Description
Qty Per Box
Price
PB
PB500
PB Washer
PB Washer
1,000
500
109.00
64.50
6
Available in Boxes
500 or 1000
WASHERS
PBH w/Wood/Lite-Metal Screw
WOOD/LITE-METAL
Insulation Thickness
PBH and Wood/Lite-Metal Screws, Assembled with Washer for
Wood and Lite-Gauge Metal Application, 20- to 26-gauge
WH115⁄8”
1”
1,000
16 lbs
135.00
WH2 2”
11⁄2”
1,000
18 lbs
145.00
WH3 21⁄2”
2”
1,000
20 lbs
155.00
WH4 3”
21⁄2”
1,000
22 lbs
175.00
WH6 4”
3-31⁄2”
1,000
39 lbs
245.00
WH7 5”
4-41⁄2”
1,000
47 lbs
320.00
WH8 6”
5-51⁄2”
1,000
56 lbs
360.00
PBH Washer with Steel Screw
20 to 26 GAUGE
SH2
SH3
SH4
SH5
SH6
2”
25⁄8”
3”
4”
5”
Insulation Thickness
PBH and Steel Screws, Assembled with Washer for
Heavy-Gauge Metal Application, 12- to 20-gauge
SH1
15⁄8”
1”
1,000
17 lbs
11⁄2”
2”
21⁄2”
3”-31⁄2”
4”-41⁄2”
1,000
1,000
1,000
1,000
1,000
155.00
165.00
189.00
219.00
285.00
410.00
19 lbs
21 lbs
24 lbs
36 lbs
48 lbs
PBH with Tapcon™ Screw
PBH and Masonry Screws, Assembled with Washer for
Concrete and Masonry Application
13⁄4”
21⁄4”
23⁄4”
31⁄4”
4”
5”
1” 11⁄2”
2”
21⁄2”
3”
4”
Insulation Thickness
MH1
MH2
MH3
MH4
MH5
MH6*
1,000
1,000
1,000
1,000
1,000
1,000
20 lbs
24 lbs
26 lbs
28 lbs
32 lbs
38 lbs
299.00
339.00
359.00
439.00
595.00
1,059.00
STEEL 12 to 20 GAUGE
PB Wood/Lite-Metal Screw
15⁄8”
2”
21⁄2”
3”
4”
5”
6”
Insulation Thickness
W1
W2
W3
W4
W6
W7
W8
1”
11⁄2”
2”
21⁄2”
3-31⁄2”
4-41⁄2”
5-51⁄2”
1,000
1,000
1,000
1,000
1,000
1,000
1,000
LITE-METAL
WOOD
PB and Wood/Lite-Metal Screws, Assembled with Washer for
Wood and Lite-Gauge Metal Application, 20- to 26-gauge
17 lbs
19 lbs 21 lbs
23 lbs
31 lbs
39 lbs
45 lbs
MASONRY - SOLID OR BRICK
PB Washer with Steel Screw
Insulation Thickness
PB and Steel Screws, Assembled with Washer for
Heavy-Gauge Metal Application, 12- to 20-gauge
S1
15⁄8”
1”
1,000
17 lbs
S2
2”
11⁄2”
1,000
19 lbs
S3
25⁄8”
2”
1,000
21 lbs
S4
3”
21⁄2”
1,000
24 lbs
S5
4”
3”- 31⁄2” 1,000
36 lbs
S6
5”
4”- 41⁄2” 1,000
38 lbs
S7
6”
5”- 51⁄2” 1,000
45 lbs
20 to 26 GAUGE
PB with Tapcon™ Screw
Insulation Thickness
PB and Masonry Screws, Assembled with Washer for
Concrete and Masonry Application
M1
13⁄4”
1” 1,000
20 lbs
M2
21⁄4”
11⁄2”
1,000
24 lbs
M3
23⁄4”
2”
1,000
26 lbs
M4
31⁄4”
21⁄2”
1,000
28 lbs
M5
4”
3”
1,000
32 lbs
M6*
5”
4”
1,000
38 lbs
* Does not include drill bits
STEEL 12 to 20 GAUGE
MASONRY - SOLID OR BRICK
www.demandproducts.com • 1-800.325.7540
7
WASHERS
DP 300 Washer
CI
All Purpose PM Washer
• Low Profile Design. Seats Flush
• Key Holes Create Strong Mechanical Bond
• Large 13/4” Head Diameter
• Strong Polypropylene Material Provides
TOOL
Impact Resistance and Long Life
• Use for Lath and Plastic Lath Attachment
Item #
DP300
ITEM
#
DP400
QUANTITY
PER BOX
1,000
Approx.
Weight
6 lbs
Qty Per Box
1,000
Approx. Wt
6 lbs
DP 300 Washer
PRICE
Pre-Assembled with Wood Screw
45.00
Item #
D3W1
D3W2
D3W3
Insulation
Size Thickness
1”
15/8”
11/2”
2”
1/2
2”
2 ”
Qty Per Box
1,000
1,000
1,000
Approx. Wt
14 lbs
16 lbs
18 lbs
Other type and size pre-assembled screws are available upon request.
DP 400 Washer
Time Saving Pre-Spot Stem
• Low Profile Design. Seats Flush
• Key Holes Create Strong Mechanical Bond
• Large 13/4” Head Diameter
• Strong Polypropylene Material Provides
Impact Resistance and Long Life
Item #
DP400
Qty Per Box
1,000
Approx. Wt
6 lbs
Fastener Patterns & Windload Specs on Pages 9, 10 & 11
The DP300 & DP400 secures rigid insulation to multiple substrates
Wire Lath
8
Wire Mesh
Fiber Mesh
Continuous Insulation
WASHERS
DP500 Tab Washer
Foam Tack Fastener
• G90 Chromium Plated
• Meets ASTM A653 Standard
• Pre-Spot Tabs • 11/4” Diameter Plate
• Can be Screwed, Nailed or Shot
• Works Well with Multiple Substrates
• Covers Many Rigid Insulation Applications
Item #
Description
TAC75
TAC112
TAC134
34
Great for Lath & Stucco
Item #
DP500
Holds Foam to Foam
Price
Qty Per Box Approx. Wt
1,000
6 lbs
45.00
ITEM QUANTITY
Approx.
PRICE
#
PER BOX
Weight
DP400
1,000
6 lbs
45.00
ITEM
#
DP400
QUANTITY
PER BOX
1,000
Approx.
Weight
6 lbs
Price
⁄ ” Trim to Foam Trim Tac (Pak of 250)
15.00
11⁄2” Foam to Foam Insul Tac (Pak of 250) 15.00
13⁄4” Foam to Foam Arrow Tac (Pak of 250) 15.00
TAC75PRICE
TAC112
TAC134
45.00
WT1
WT158
Wall Tac™
DP525 Washer
EPS Foam Auger Anchor
• Holds Trim to Foam
• Mechanically Attaches Control Joint
• Grip-Guard Galvalume Coated Steel
• Helps Stabilize and Re-Support Old Plaster
• 11/4” Diameter Plate
• .023 to .025 Gauge with 4 Keyholes
• Edges Taper Toward Work Area
• Tapered Edge Will Not Catch Trowel Edge
• For Downspouts, Lights, Fixtures, etc.
• High-Strength Plastic Construction
Holds Trim & Joints
Plaster Repair Washers
to Substrate Foam Insulation
• Allows Control Joints to Move with
Foam Insulation
Item #
WT1
WT158
Size
1”
15/8”
Qty Per Box
1,000
1,000
Approx. Wt
3 lbs
5 lbs
Spiral Anchoring to EIFS
™
Price Item #
65.00 DP525-1
75.00 DP525
Qty Per Box
100
1,000
Approx. Wt
1 lb
6 lbs
Price
10.00
55.00
with Foam Washer
• 1 1/2” Deep x 1” Wide, 1/8” Foam Washer
• No Thermal Bridging
• Can Be Installed with Commercial Drill
Item #
SD10
Qty Per Box
10
Approx. Wt
1 lb
Windload Specs for PB, PBH, DP300 & DP400 Washers
Testing was performed by Underwriters Laboratories per ASTM E330 and E331. Procedure B.
Demand PB Washer
& PBH Washers
Fastener Pull-Through Results
in Average Pounds Ultimate
Tapcon Dec-King
401
410
S-12
427
Insulation Pull-Over Results
in Aver. Pounds Ultimate (1 Lb Density EPS)
1”
85.6
11/2”
93.6
2”
108
The 2”diameter increases windload resistance and has 25% more
pullover value than 1 3⁄4” washers.
Structural performance tests conducted with ASTM E-330. Average
ultimate negative load was -97 PSF.
DP300 Washers
SPECIFICATIONS:
Diameter: 1 3⁄4”
Material: Polypropylene
Push Through @ 10° 256 lbs.
Push Through @ 180° 177 lbs.
Pull Over 50.8 lbs. @ 10°
Pull Over 122.4 lbs. @ 180°
DP400 Washers
SPECIFICATIONS:
Diameter: 1 3⁄4”
Material: Polypropylene
Push Through @ 10° 256 lbs.
Push Through @ 180° 177 lbs.
Pull Over 50.8 lbs.@ 10°
Pull Over 122.4 lbs. @ 180°
www.demandproducts.com • 1-800.325.7540
9
Price
10.00
55.00
MASONRY
• Unique
Textured 25/16”
Thin Profile
Head Locks
Coatings with
Multiple Key
Holes
• Polypropylene Plastic
• Flex Lock
Rings
Insure Excellent
Pullout Values
™
• Reinforced Ribbed
Shank for Strength
• Requires a
/ ” Drill Bit
5 16
Congrip
Quickest & Best Way
for Fastening to Concrete
• Large 2 5/16” Head
• Reduces Installation Time By Up To 40%
• Installs Quickly
• Strong Pullout Values
• Eliminates Thermal Shorts
• Requires a 5⁄16” Drill Bit
Item #
CG0
CG1
CG2
CG3
CG4
CG5
Length
2”
23/4”
31/2”
41/4”
5”
53/4”
Qty Per Box
250
250
250
250
250
250
Price
106.68
124.25
128.60
274.88
365.96
417.98
Congrip Fastener Technical Data for Hollow & Solid Block
Hollow
Minimum
Anchor
Bit
Embedment Insulation
Item #
Length Diameter Depth (in.) T hickness
5
CG0 2”
⁄16”11⁄8”1”
3
5
CG1 2 ⁄4”
⁄16”11⁄8”11⁄2”
5
CG2 31⁄2”
⁄16”11⁄8”2”
1
5
CG3 4 ⁄4”
⁄16”11⁄8”21⁄2” – 3”
5
CG4 5”
⁄16”11⁄8”31⁄4” – 31⁄2”
3
5
CG5 5 ⁄4”
⁄16”11⁄8”4” – 43⁄4”
Solid
Average Ultimate Pullout
Minimum
** Hollow
Insulation *Concrete Concrete
Brick
Thicknes
Block
0” – 7⁄8”
110
45
55
7
⁄8” – 13⁄4”
110
45
55
2” – 23⁄8”
110
45
55
23⁄4” – 31⁄8”
110
45
55
31⁄2” – 4”
110
45
55
4” – 43⁄4”
110
45
55
*Concrete Strength f’c = 2500 psi **Hollow Concrete Block meets ASTM SPEC C90
Grade N Type II. Pullout values may be limited by the strength of the material fastened.
Washer Placement Patterns PB & PBH Washers
Structural Substrates Such as Wood Sheathing,
Concrete, Masonry & Metal Siding
Wood, Plywood, Metal Siding, Masonry and Concrete
6”
12”
12”
12”
Wind Load Capacity
6”
6”
12” 24”
6”
48”
8”
16”
16”
8”
4”
8”
8”
48”
24”
4”
Non-Structural Sheathings such as OSB, Gypsum,
Dens-Glass Gold
10
8”
8”
8”
8”
8”
8”
(Average Ultimate PSF, Negative Pressure
1.0 Lb. EPS
1”
Pattern A
83
Pattern B
85
11/2”
105
104
These
spacing
patterns
are general guidelines for
mechanical installation of
EPS to different substrates
when used in conjunction
with a typical EIFS system or
similar systems. Construction
projects vary and yours may be
different from these fastener
suggestions. Please consult
your EIFS manufacturer when
using Demand fasteners along
with adhesives. For additional
information
call
Demand
Products Technical Services at
1-800-325-7540
8”
6”
12”
24”
6”
48”
4”
10”
10”
10”
10”
4”
4”
8”
8”
48”
24”
4”
Structural Substrates Such as Wood Sheathing,
Concrete, Masonry & Metal Siding
PREMIUM SCREWS
Wood-Lite Metal
For Use
with Wood
& Metal
For Use
with Wood
& Metal
From 26-gauge
to 20-gauge
Premium Coated Screws
For Use with
Steel
For Use with
Concrete
Masonry
Steel
10 FREE MDB55
Drill Bits per box
of 1,000 Screws
From 20-gauge to
12-gauge
Wood-Lite Metal – Climacoat Coated
Steel – Climacoat Protection
For Use with Wood & Metal from 26 to 20-Gauge.
For Use with Steel from 20 to 12-Gauge Studs.
For Use with Concrete Block, Poured
Concrete, or Masonry.
Item #
WS1
WS2
WS3
WS4
WS6
WS7
WS8
Item #
SS1
SS2
SS3
SS4
SS5
SS6
SS7
Item #
MS1
MS2
MS3
MS4
MS5
MS6**
TM
Length
7 X 15/8”
8 X 2”
8 X 21/2”
8 X 3”
8 X 4”
10 X 5”
10 X 6”
Qty Per Box
1,000
1,000
1,000
1,000
1,000
1,000
1,000
TM
Price
28.50
38.95
49.25
65.00
138.75
175.00
225.00
Length
6 X 15/8”
6 X 2”
8 X 25/8”
8 X 3”
10 X 4”
10 X 5”
10 X 6”
Qty Per Box
1,000
1,000
1,000
1,000
1,000
1,000
1,000
Price
36.95
49.50
23.50
104.75
159.25
265.00
434.25
Masonry – Climaseal Protection
TM
Length
Qty Per Box
1,000
3/16 x 13/4”
1,000
3/16 x 21/4”
1,000
3/16 x 23/4”
1,000
3/16 x 31/4”
1,000
3/16 x 4”
1,000
1/4 x 5”
Price
183.75
215.00
235.00
320.00
475.00
918.75
*10 free MDB55 Drill BIits per box of 1,OOO screws.
** Drill Bit Not Included
Screw Pullout Performance Data
Solid Concrete
Fastener Depth of Embedment in Solid Material (inches)
Diameter
1”
11⁄4”
11⁄2”
13⁄4”
(conforms to ASTM C-548 & C-1002)
Nominal Gauge
26
24
22
20
(conforms to ASTM C-954 & C-548)
Nominal Gauge
18
16
14 12
Pullout Strength 120 183 248 296
Pullout Strength 471 679 847 1225
(1⁄4” Minimum Through Penetration)
(1⁄4” Minimum Through Penetration)
⁄ ”
3 16
341
581
863
1059
Test #CH3932/Pittsburgh Testing Laboratories
Coating: CLIMASEAL™ for masonry/concrete
fasteners only
Corrosion Resistance: Kestemich Results
(Din 50018, 2.OL) • 30 cycles - 10% or less
red rust. Salt Spray Results (ASTM B117)
• 720 Hours -10% or less red rust.
Hollow Block
Fastener Depth of Embedment in Solid Material (inches)
Diameter
1”
11⁄4”
11⁄2” 13⁄4”
⁄ ”
3 16
*209
*357
*468
*547
Test #CH3748/Pittsburgh Testing Laboratories
Coating: CLIMASEAL™ for masonry/concrete
fasteners only
Corrosion Resistance: Kestemich Results
(Din 50018, 2.OL) • 30 cycles - 10% or less
red rust. Salt Spray Results (ASTM B117) •
720 Hours -10% or less red rust.
Coating: CLIMASEAL™ for masonry/concrete fasteners only
Coating: CLIMACOAT™
Corrosion Resistance: Kestemich Results (Din 50018, 2.OL) • 30 cycles - 10% or less red rust.
Corrosion Resistance: Kestemich Results (Din 50018, 2.OL ) • 20 cycles Salt Spray Results (ASTM B117) • 720 Hours -10% or less red rust.
10% or less red rust. Salt Spray Results (ASTM B117) • 500 hours - 10% or
less red rust for wood, lite-metal and steel fasteners.
*Note 1: Masonry must be pre-drilled 1⁄2” deeper than fastener penetration.
*Note 2: Hardness of masonry varies and the standard drill bit may not always drill the adequate hole. Please consult Demand Products for assistance in proper drill bit diameter.
Please Note: The pullout values listed are the ultimate averages achieved under laboratory conditions. An appropriate safety margin factor should be applied to these values to achieve a design value.
11
HOT KNIFE CR
Hot Knife™ CR CutRite™
HEATS UP TO 10” WIRE
Complete with Case
CI
TOOL
• 150 Watts
• Includes 4” & 6” Blades and Case
• Electronic Circuit Board Powered
• Variable Power Control
• Lightweight
• Stamped Blades
• Spring Loaded Safety Trigger
Item #
HKTCR
Description
Hot Knife™ CR & Blade Adapter
w/ 4” & 6” Blades
200CR
2” Blade
400CR
4” Blade
600CR
6” Blade
HDC220
220 Volt Converter
HKTCRP01 Blade Adapter
HKTCR
2”, 4” & 6” Blades Available
ADJUSTABLE HEAT DIAL
Comes Complete with 4” & 6” Blades, Custom Blade Adapter, Cleaning Brush and Case
STOPS
HKTCRP01
Custom Blade Adapter
12
G50
G75
G100
G75SP
SPV
SPSQ
250
300
450
550
STOPL
All of these Custom Blades will fit your Hot Knife™ CR
CutRite™ using the Blade Adapter
ACCESSORIES
6” Groove Adapter
1” Groove Adapter
Item #
CR6G
NWFW
Item #
CR1G
NWFW
Blades Up to 6” Wide
Blades Up to 1” Wide
Description
Hot Knife™ CR 6” Groover Plate
Flat Wire, per foot
Description
Hot Knife™ CR 1” Groover Plate
Flat Wire, per foot
CI
TOOL
Hot Knife™ CR Pro Kit
Everything You Need
Hot Knife™ CR CutRite™ Kit
Super Value Saves Money
Description
KITCR6G
Hot Knife™ Kit
Item #
Description
KITPROCR
Hot Knife™ Kit
Wire Cutting Tool
Crimping Tool
• Kit Includes: Wire Crimper
& 10’ of NWFW Flat Wire
• Quality Chrome Plated Precision
• 10’ NWFW Wire & Shaping Tool
Cuts NWFW Wire
Item #
Description
Price
WCUT
Wire Cutting Tool
52.00
TOOL
Kit Includes: Hot Knife™, 4” and 6” Blades, 6” Groove
Adapter, 3 Feet of NWFW Wire, Crimping Pliers ,
6” DuraRasp™ and Canvas Bag.
Kit Includes: Hot Knife, 4” and 6” Blades, 6” Groove
Adapter, 3 Feet o­­f NWFW Wire and Case.
Item #
CI
Price
395.95
Precise Bends in NWFW Wire
Item #
Description
WCP
KITWCP10
Wire Shaping Tool
Shaping Tool Kit
KITWCP10
WCUT
WCP
www.demandproducts.com • 1-800.325.7540
13
HOT KNIFE
The Original
Hot Knife
TM
CI
TOOL
• 105 Watts
• Transformer Powered
• Lightweight — Only 1 Pound
• High Quality Blades with
Post Mounts Not Stamped
• Spring Loaded Safety Trigger
• Blades Sold Seperately
HKT450
STOPS
Item #
Description
HKT
HKT250
HKT300
HKT450
HKT550
HKTG75
250
300
450
550
G50
G75
G100
G75SP
SPV
SPSQ
STOPS
STOPL
CASEH
CASEA
HKTT
HKT20
Hot Knife™ Tool, 105 Watts
Hot Knife™ Tool, w/ 2.5” Blade
Hot Knife™ Tool, w/ 3.0” Blade
Hot Knife™ Tool, w/ 4.5”Blade
Hot Knife™ Tool, w/ 5.5”Blade
Hot Knife™ w/3/4 Curved Blade
2.5” Straight Blade
3.0” Straight Blade
4.5”Straight Blade
5.5”Straight Blade
1/2” Curve Blade
3/4” Curve Blade
1” Curve Blade
3/4” Curve Blade w/ Lip
3/4” V Groove w/ Lip
3/4” Square Groove w/ Lip
Short Ceramic Depth Stop
Long Ceramic Depth Stop
Hot Knife™ Hard Case
Hot Knife™ Aluminum Case
Hot Knife™ Trade In
Hot Knife™ Tool, 220 Volts*
*INTERNATIONAL TOOL
G75
G50
G100
G75SP
SPV
SPSQ
250
300
450
550
STOPL
HEATS UP TO 10” WIRE
Hot Knife™ 4” Adapter Vertical Adapter with Guide
• Vertically Positions the Hot Knife™
• Handles up to 4” Wide NWFW Blades
Item #
GJA3G
NWFW
Description
Adapter
Flat Wire, per foot
Price
150.00
10.00
GJA4G
GJA3G
4”
4”
Hot Knife™ 4” Adapter Horizontal Adapter with Guide
• Horizontally Positions the Hot Knife™
• Handles up to 4” Wide NWFW Blades
14
Item #
GJA4G
NWFW
Description
Adapter
Flat Wire, per foot
Price
225.00
10.00
ACCESSORIES
Hot Knife™ Kit 1
Shaping Wire Tool
Master Kit
Precise Bends in Flat Wire
• Cuts both Expanded and Extruded Foam
• Cuts Fast, Clean and Accurately
• Heats Up In Seconds
• Highest Quality Blades in the Industry
• Kit Includes: Hot Knife™ 250, 300, 450,
550, G50, G75, G75SP, SPV, G100, SPSQ
Blades, Long Stop, Short Stop & Hard Case
Item #
Description
KITHKK
KITHKKA
KITHKK220
Master Hot Knife™ Kit
Kit w/ Aluminum Case
Hot Knife™ Kit, 220 Volts*
• Kit Includes: Wire Crimper & 10’ of NWFW Flat Wire
Item #
Description
WCP
KITWCP10
Wire Shaping Tool
Shaping Tool Kit
Price
20.00
105.00
WCP
Hot Knife™ Kit 2
Vertical Tool Buddy Adapter Kit
• Hot Knife™
• 41/2” Blade
• 2’ NWFW Wire • Carrying Case
• GJA3G Groove Jet™ Adapter
Item #
Description
KITHKTB
KITHKTBA
KITHKTB20
Tool Buddy Vertical Kit
Kit w/ Aluminum Case
Hot Knife™ Kit,220 Volts*
Specially Designed Head Gives Clean Crisp Corners
™
SHAPE YOUR OWN BLADES
Hot Knife™ Kit 3
Hot Knife™ Adapter Kit
Horizontal Tool Buddy Adapter Kit
Sculpter’s Flat Wire Adapter
• Hot Knife
• 4 ” Blade
• 2’ NWFW Wire • Carrying Case
• GJA4G Groove Jet™ Adapter
™
• Wire Adapter Posts
• Allen Wrench
• 12” NWFW Wire
• Hot Knife Sold Separately
1/2
Item #
Description
KITHKTB4
KITHKTB4A
KITHKTB204
Tool Buddy™ Horizontal Kit
Kit w/ Aluminum Case
Hot Knife™ Kit,220 Volts*
Item #
FWA10
Hot Knife™ Carrying Cases
Description
Adapter
Price
56.00
*INTERNATIONAL TOOL
Hard Shell or Aluminum
Item #
CASEH
CASEA
Description
Hot Knife™ Hard Case
Hot Knife™ Aluminum Case
Price
25.00
60.00
Tools Not Included
Plastic Hard Case
CASEH
Aluminum Case
CASEA
Shape your
Own Blades
for Sculpting
Up to 10”
www.demandproducts.com • 1-800.325.7540
15
GROOVE JET
Groove Jet™ 300 Hot Knife
Aesthetic Groove Cutter
• Weights Only 4 Lbs.
• Handles Up to 5” x 3” NWFW Blades
• Heats Up Fast
• Cuts Clean with One Pass
• Also Available in 220 Volts
• Blade Positioned Up Front
Item #
Description
KITGJ300
NWFW
Groove Jet™
Flat Ni-Chrome Wire-per ft.
Cuts All The
Way To
Inside Corners
KITGJ300
With Guide
HEATS UPTO 11” WIRE
GJASB
Blade not included
Straight Blade Adapter
Groove Jet™ Kit
Fits our Groove Jet™
• GJ300 Groove Jet™ • 10’ NWFW Flat Wire
• Carrying Case
Item #
Description
GJASB
300
450
550
Straight Blade Adapter
3” Straight Blade
41/2” Straight Blade
51/2” Straight Blade
Most Popular Grooving Kit
• Adapts Groove Jet™ to Use Straight Blades
• Adapts Either Our 3”, 41/2” or 51/2” Blade to the Groove Jet
Item #
Description
KITGJ3K
Groove Jet™ w/ Hard Shell Case
KITGJ3KA Groove Jet™ w/ Aluminum Case
Aluminum Case
Plastic Hard Case
20”W
9”H
8”D
17”W
5.5”H
12”D
Groove Jet™ Cases
• Tools Not Included
Item #
Description
CASEA
55.00
Aluminum Case
17” W x 5.5” H x 12” D
50.00
Plastic Case
20” W x 9” H x 8” D
CASE
16
Price
BLADES
Groove Tool Handle & Accessories
Inserts
Handle, Custom Blades, Custom Inserts
& Blade Kit
Item #
GTH02
GJBCUSTOM
GTICUSTOM
Handle
Description
Groove Tool Handle
Custom Blade (Pkg of 3)
Custom Insert (each)
*CUSTOM SIZES AVAILABLE
Blades
GTH02
Square Groove Tool
Blades & Sled Kits
Hot Knife Blades
Nylon Sleds
Item #
KITS-103
KITS-201
KITS-203
Item #
GBS-103
GBS-201
GBS-203
Item #
GIS-103
GIS-201
GIS-203
Dimensions
1 X 3/4”
2 X 1”
2 X 3/4”
Dimensions
1 X 3/4”
2 X 1”
2 X 3/4”
Dimensions
1 X 3/4”
2 X 1”
2 X 3/4”
Angled Groove Tool
Blades & Sleds Kits
Hot Knife Blades
Nylon Sleds
Item #
KITA-102
KITA-152
KITA-201
Item #
GBA-102
GBA-152
GBA-201
Item #
GIA-102
GIA-152
GIA-201
Dimensions
1 X 1/2 X 1/2”
1 1/2 X 1/2 X 1/2”
2 X 1 X 1”
Dimensions
1 X 1/2 X 1/2”
1 1/2 X 1/2 X 1/2”
2 X 1 X 1”
Dimensions
1 X 1/2 X 1/2”
1 1/2 X 1/2 X 1/2”
2 X 1 X 1”
Beveled Groove Tool
Blades & Sleds Kits
Item #
KITB-154
KITB-201
Dimensions
1 1/2 X 3/4 X 1”
2 X 1 X 1 3/8”
Hot Knife Blades
Price
Item #
GBB-154
GBB-201
Dimensions
1 1/2 X 3/4 X 1”
2 X 1 X 1 3/8”
Nylon Sleds
Price
Item #
GIB-154
GIB-201
Dimensions
1 1/2 X 3/4 X 1”
2 X 1 X 1 3/8”
Price
V Groove Tool
Blades & Sleds Kits
Hot Knife Blades
Nylon Sleds
Item #
KITV-175
KITV-5050
KITV-7575
Item #
GBV-175
GBV-5050
GBV-7575
Item #
GIV-175
GIV-5050
GIV-7575
Dimensions
1 X 3/4”
1/2 X 1/2”
3/4 X 3/4”
Custom Blades and Base & Finish Inserts are Made to Order
Length
1 X 3/4”
1/2 X 1/2”
3/4 X 3/4”
Dimensions
1 X 3/4”
1/2 X 1/2”
3/4 X 3/4”
www.demandproducts.com • 1-800.325.7540
17
ZETZ
Zetz 20™
Thermocutter
• Excellent for Cutting Rubber, Polyethylene
& Polypropylene
• Electronic Circuit Board Powered
• Heats Up Quickly
• Adjustable Temperature Control
• Off-On Finger Control
• 110 Volts. Also Available in 220 Volts
• Cuts Materials Up to 5” Thick
Item #
Description
ZTC20
Z50
Z100
Z200
Thermocutter
2” Blade (Pack of 6 Blades)
4” Blade (each)
8” Blade (each)
Variable
Heat Control
­ZTC20
Comes with
One Z50 Blade
Off/On
Trigger
Price
450.00
55.80
11.40
12.90
Z50, 2” Blade
Z100, 4” Blade
Z200, 8” Blade
Please Note: Other Blades Available
Cuts Carpet Clean and Fast!
Z etz S pecialty Blades
#Z06
$12.90
#Z40
Rounded edge to glide along
cutting surface. Heat seals the
edges to prevent fraying of
synthetic fibers and textiles.
0.6 mm Thick
3 mm Cutting Edge
$14.70
Wide blade back and reinforced
cutting flange for stable
cutting. High temperature
blade is designed for heat
sealing the cut edges.
0.6 mm Thick
40 mm Cutting Edge
#Z35
#Z45
$17.20
Long pointed blade flanges.
Ground both sides for twodirectional cuts. For cutting
around templates. Also for
deburring.
1.0 mm Thick
35 mm Cutting Edge
#Z45:0.8 mm Thick
45 mm Cutting Edge
Designed for Industrial Operations
Item #
Description
ZETZ24
Z75
Z120
Industrial Thermocutter
3” Blade (each)
43/4” Blade (each)
Please Note: Other Blades Available
18
#Z70
28.90
Curved cutting edge and thick blades.
High temp blade for long cuts under
pressure. *#Z70 blade for Zetz 24 only.
Zetz 24™
• Excellent for Cutting Rubber, Polyethlyne
& Polypropylene
• Heats Up Quickly
• Variable Heat Control
• Remote HD Transformer with Extra Long 91/2 Foot Cable
• 110 Volts. (Also Available in 220 Volts)
• Cuts Materials Up to 5” Thick
$28.90
ZETZ24
Comes with
3” Z75 Blade
#Z70:1.0 mm Thick
70 mm Cutting Edge
HOT ROD
Hot Rod™
Super Duty 50 Amp EPS Panel Cutter
• Strongest in the Industry
• Cuts All Day Long Without Overheating
• Uses Heavy Gauge Round and Flat Wire As Well As Standard Hot Knife Blades
• Variable Heat Control — Heats Up Extremely Fast
• Remote HD Transformer with Extra Long
9 Foot Cable
• Excellent for SIP’s, ICF, EIFS or In-Plant
Production Applications
• Heats From 8” to 24” of NWFW Wire
• 110 Volts. Also Available in 220 Volts
Item #
Description
*HR
KITHRK
*250
*300
*450
*550
*600CR
*800
*G50
*G75
*G100
*G75SP
*SPV
*SPSQ
*HRP10
*STOPS
*STOPL
Hot Rod™ Only, 110 Volts (60 Hertz)
Hot Rod™ Kit Includes *items below
21/2” Straight Blade
3” Straight Blade
41/2” Straight Blade
51/2” Straight Blade
51/2” Straight Blade (Open Mount)
71/2” Straight Blade (Open Mount)
1/2” Curve Blade
3/4” Curve Blade
1” Curve Blade
3/4” Curve Blade w/ Lip
3/4” V Groove w/ Lip
3/4” Square Groove w/ Lip
Hot Rod™ Blade Adapter
Short Ceramic Stop
Long Ceramic Stop
HR
600CR - 51/2”
800 - 71/2”
STOPL
G50
G75
G100
G75SP
SPV
SPSQ
* INCLUDED IN KIT
** INTERNATIONAL TOOL
GJA3G Adapter
4” Blade Width
300
450
550
STOPS
HRP10
HRP02
Cord and Handle
HR220
Hot Rod™ Tool Only, 220 Volts
(50 / 60 Hertz)
KITHRK220** Hot Rod™ Kit, 220 Volts
(50 / 60 Hertz)
250
Hot Rod™ Blade Adapter
For Flat Blade and NWFW
Hot Rod™ Replacement
Cord and Handle
HRP02
Hot Rod™ Cord and Handle
GJA6G Adapter
6” Blade Width
Hot Rod™ Blade Adapters
3 Convenient Sizes with Guides
• Excellent for SIPs, ICF or EIFS
• Great for In-Plant Production
Applications
Item #
GJA3G
GJA6G
GJA10G
HRP02
NWFW
Description
4” Groove Jet™ Adapter
6” Groove Jet™ Adapter
10” Groove Jet™ Adapter
Cord and Handle
Flat Ni-Chrome Wire - per ft.
GJA10G Adapter
10” Blade Width
www.demandproducts.com • 1-800.325.7540
19
CONTROLLER
Geo 8’ Foam Hot Wire Kit
Free-Hand Cutting
• Hot Wire Handles
• Mag8 Controller
• From 24” to 108”
• 100 Foot Roll of Inconel Wire
• Carrying Case
Item #
Description
KITGFHWH
IW100
Hot Wire Kit
Inconel Chrome Wire, 100 ft.
Price
SIP Groover SIP Panel Groove Tool
• Weighs Only 2 Lbs.
• Long HD Cord
• Heavy Commercial Construction
• Adjustable Depth Guide
Item #
Description
SIPG114
SIPG312
SIPG412
SIPG512
SIPG714
SIPG914
SIPG1114
CASE
11/4” SIP Groover Tool
31/2” SIP Groover Tool
41/2” SIP Groover Tool
51/2” SIP Groover Tool
71/4” SIP Groover Tool
91/4” SIP Groover Tool
111/4” SIP Groover Tool
Sip Groover Case
Please Note: Custom Sizes Available
Price
139.00
149.00
159.00
169.00
179.00
189.00
199.00
50.00
Rope Cutter II
Cuts and Fuses Nylon, Dacron,
Polypropylene Line & Rope
• Warms Up in 30 Seconds
• 110-Volt
• Free Standing or Table Mount
Item #
Description
RCUT2
RCUTP01
Rope Cutter II 21/4”
21/4” Replacement Blades
HDC 220 Power Converter
• Step-Up and Step-Down Transformer
• Converts 110V to 220V and 220V to 110V
HDC220
20
Item #
Description
Price
HDC220
220 Volt Converter
39.95
1,025.00
85.00
MAXX SOLDERING GUN
HKTMX
MAXX Soldering Gun
2 IN 1, MAXX 2 1/2” Foam Cutting
Blade & Soldering Gun Hot Knife
• 100 Watts of Power for Diverse Application
• 110-Volt Transformer Power Supply
• Ready to Use in 6 Seconds
• Built-in Power Light Indicator
• Storage Case Included for Convenience and Portability
*Includes Soldering Gun, Tip, 2 1/2” Foam Cutter
Blade, Cleaning Brush and Case
HKTMX250
Item #
Description
HKTMX
MXBT
hktmx250
Maxx Soldering Gun
Replacement Maxx Soldering Gun Tip
* Maxx Soldering Kit
3 in 1 Soldering Gun, Fabric
& Foam Cutter
• Comes with 2 1/2” Foam Blade & Fabric Blade,
Soldering Tip, Cleaning Brush & Case
• 110 Volts
• 100 Watts
Item #
Description
HKTMXF3
3 in 1 Soldering Gun
2 in 1 Soldering Gun,
Fabric & Foam Cutter
HKTMXF3
• Case, Soldering Tip & Cleaning Brush
& Fabric Blade
• 110 Volts
• 100 Watts
Item #
Description
HKTMXFC
2 in 1 Soldering Gun/w
Fabric Blade
HKTMXFC
Fabric Cloth Cutter Hot Knife
The Fabric Cutter Hot Knife Cuts & Seals Sail,
Canvas, Cloth and other Synthetic Fabrics
• 130 Watts
• Electronic Circuit Board Powered Cutter
• Variable Heat Control
• Post Mounted Fabric Cutter Blade
• Spring-Loaded Safety Trigger
Hot Knife Fabric Cutter Includes Tool, R Blade, Guide,
Case & Cleaning Brush
Item #
Description
HKTFC
FCBR
HDC220
Fabric Cutter Hot Knife, Blade, Guide Kit
R Fabric Cutter Hot Knife Blade
220 Volt Power Converter
HKTFC
www.demandproducts.com • 1-800.325.7540
21
BOW CUTTERS
Adjustable Leg Depth Control
CI
TOOL
BowCutter 48™
48” Free-Form Cutter w/ Depth Adjuster
48”
KITBC48M
• Can be Purchased With or Without our Magnum Power Supply
• Uses NW100 Wire
18 ”
BowCutter 24™
24” Free-Form Cutter
• Can be Purchased With or Without our Magnum Power Supply
• Uses NW100 Wire
24”
24”
KITBC24M
BowCutter 12™ 12” Free-Form Cutter
• Comes with Built-In Power Supply
• Uses NW100 Wire
12”
BC12C
12”
BowCutter 12™ comes complete
with power controller
Item #
Description
BC48
MAGNUM
KITBC48M
BC24
KITBC24M
BC12C
NW100
NW500
Bow Cutter, 48”,Only
Magnum Power Controller
Bow Cutter, 48”, w/ Magnum
Bow Cutter, 24”,Only
Bow Cutter, 24”, w/ Magnum
Bow Cutter, 12”, w/ Controller
Ni-Chrome Wire, 100 ft.
Ni-Chrome Wire, 500 ft.
Price
278.00
563.00
795.00
244.00
750.00
517.00
55.00
220.00
Wall Skinner™
WS48
3”
Shaves EPS High Spots
• Eliminates EPS Dust
• Reduces Rasping
• Levels Walls to Perfection
Item #
WS48
MAGNUM
KITWS48M
NW100
NW500
KITWS48M
MAGNUM
22
Description
Wall Skinner™, 48” Only
Magnum Controller
Wall Skinner™, 48” w/ Magnum
Ni-Chrome Wire, 100 feet
Ni-Chrome Wire, 500 feet
Price
255.00
563.00
775.00
55.00
220.00
MAGNUM CONTROLLERS
Light Gauge Wire Only
Magnum™ Controllers & Wire
NW100
4’, 8’, 10’ and 17’
• Uses Light Gauge Wire Only
• Each Size is Designed to Heat the Appropriate
Length of Wire Hot Enough to Cut EPS Foam
Item #
Description
MAGNUM
NW100
NW500
MAG8
IW100
IW500
Magnum Power Controller
Ni-Chrome Wire, 100 feet (.02265)
Ni-Chrome Wire, 500 feet (.02265)
8’ Magnum Power Controller
Inconel Wire, 100 Foot Roll (.0126)
Inconel Wire, 500 Foot Roll (.0126)
NW500
Heats NW100 Wire
24” to 53”
Hot Enough to Cut EPS foam.
Price
563.00
55.00
220.00
835.00
85.00
340.00
MAGNUM
IW100
IW500
Heats IW100 Wire
24” to 108”
Hot Enough to Cut EPS foam.
MAG10 (10’) and MAG17 (17’), Also Available - Please Call
Hot Wire Kit
4’ & 8’ Kits
Do-It-Yourself Kit
• Includes: Magnum
or Mag8, Gator Cord,
2 Insulators, Spring,
and 100’ Roll of Wire
• Everything You Need to Build Your
Own 4’ or 8’ Hot Wire Machine
• Magnum or Mag8
• Gator Cord
• 2 Insulators
• Spring
• 100’ Roll of Wire
KITHW
MAG8
Item #
Description
KITHW
KITHW8
ULP200
ULP400
ULP01
SCP00
2’- 4’ Hot Wire Kit
2’- 8’ Hot Wire Kit
4’ Wide Gator Cord Only
8’ Wide Gator Cord Only
Insulator, each
Spring, each
Price
625.00
935.00
65.00
90.00
7.50
2.85
KITHW10 (10’) and KITHW17 (17’)
Also Available - Please Call
NI-CHROME WIRES
Shaping Wire Ni-Chrome Wires
APC
Item #
Description
Price
NWRW16
NWRW11
NWFW
Round Ni-Chrome Wire, per foot (.0625)
Round Ni-Chrome Wire, per foot (.125)
Flat Ni-Chrome Wire, per foot
5.00
7.50
10.00
APC Controller Use with Shape Wire
NWRW16
• Uses Heavy Gauge Wire Only
• Heats 1-3’ of NWFW or NWRW11 or 16 Wire
NWRW11
Item #
Description
Auxiliary Power Controller
APC
Price
16 Gauge, 1/16” (.0625)
11 Gauge, 1/8” (.125)
NWFW
1,108.00
/ ” x 1/32”
3 16
Hot Wire Handles Free-Hand Cutting
Item #
Description
HWH
MAGNUM
NW100
KITHWH4
MAG8
IW100
KITHWH8
HWPHP1
Hot Wire Holders (Set of 2)
4’ Magnum Power Controller
Ni-Chrome Wire, 100 ft.
HWH & 4’ Magnum (comes w/ NW100 wire)
8’ Magnum Power Controller
Inconel Chrome Wire, 100 ft
HWH & 8’ Magnum (comes w/ IW100 wire)
HWH Spring, each
10’ & 17’ Also Available - Please Call
Built-In Gator Cord
Price
153.00
563.00
55.00
715.00
835.00
85.00
985.00
6.00
•
Plug End of
Gator Cord Attaches to
Either a Magnum
or Mag8
Shown Actual Size
•
Tension Springs
•
Insulated
• Plastic
Handles
• Can Be Used for Cutting Blocks of Geo Foam
www.demandproducts.com • 1-800.325.7540
23
ARCH CUTTER
Fully Adjustable.
Both X and Y Axis
APC
53” Adjustable Radius Arm
Arch Cutter
Stand Alone Precision
Arch Cutting
AT8AC
Price
1,193.00
Price
1,108.00
1,193.00
2,185.00
1,108.00
2,185.00
Item #
Description
AT8AC
Arch Cutter Only
APC
Controller
KITARCH Arch Cutter with Controller
14”
Uses the Same Controller as the Base & Cap Cutter.
110 Volts (Available in 220 Volts)
Clamps Onto Most
Flat Surfaces
Adjustable Stops
Base and Cap Cutter
Accommodates Both
NWFW and NWRW11 Wire
Accommodates
Both NWFW
and NWRW11 Wire
Fully Adjustable.
Both X and Y Axis
Stand Alone
Multi-Purpose Base,
Cap and Shape Cutting
24”
Item #
Description
AT8BC
Base & Cap Cutter
APC
Controller
KITATBC Base & Cap Cutter with Controller
Variable
Speed HD
Turntable
22”
APC
APC Controller
110 Volts
(Available in 220 Volts)
AT8BC
Big Max 15™
Big Max 60™
15 Gallon Rotor Stator Pump Sprayer
60 Gallon Rotor Stator Pump Sprayer
• Comes with 50 Feet of Hose & Wand
• Sprays Up to 150 Feet • Weighs Only 190 Pounds
• 110 Volt Operation • Manual & Remote Operation
• Variable 0-2 GPM • HD Steel Construction
• Perfect for Spraying EIFS Finish Coat
• Sprays Up to 200 Feet • Manual & Remote Operation
• Weighs 675 Pounds • 13 HP Honda Engine
• Variable 0-10 GPM • HD Steel Construction
• Ideal for EIFS Base & Finish Coat and Hard Coat Stucco
24
Item #
BMAX15
Description
15 Gallon
Price
Call
Item #
BMAX60
Description
60 Gallon
Price
Call
TRI-MIXX
TriMixx™ Commercial Duty, 3-Position Production Mixer
• Designed for Mixing and Blending Industrial Coatings
• Powered by Three 3/4 Horsepower Motors with a 5 to 1 Ratio Transmission
• Emergency Stop Button for Each Motor
• Carriage Can be Positioned at Any Height
• 345 RPM, 110 Volts at 30 Amps
• Safety Foot Switch
• Comes Complete with Roller Conveyor
• Quick-Disconnect Chucks
• Counter Balance Carriage
• Three M819 Mixing Paddles
• Bucket Locking Mechanism
• Super Heavy Duty Ball Bearing Motors
• Heavy Duty Production Roller Conveyor
Item #
TMIXX
Description
TriMixx™ Mixer
Price
Call
Note: Shaker and Tint Equipment quotes available upon request
DeWalt™
DeWalt Electric Mixer
DeWalt Specs:
• 1⁄2” Spade Handle
• 0-550 RPM
• 7.5 Lbs
• 9 Amps, 120 Volt
Item #
M7564
Aluminum
Galvanized
Steel
Galvanized
Bottom Safety Rings to
Protect Bucket Interiors
M819
Price
295.00
Mixing Paddles
Professional Quality Mixing Paddles
• Designed for Mixing and Blending Industrial Coatings
• No Plastic Coatings to Flake Off In Material
• Heavy Duty Construction
• Made of Top Quality Materials
Item #
M822
M713
M819
M630
M636
M525
M630-30”
M636-36”
TWISTER
M822
CYCLONE
M713
Stainless
Steel
Description
Electric Mixer
Description
Cyclone Mixer 6” x 231/2” (Galvanized)
Paddle, 81/2” x 5” x 30” (Aluminum)
Quick Mix, 81/2” x 5” x 36” (Steel)
Twister Mixer, 71/2” x 30” (Stainless Steel)
Twister Mixer, 71/2” x 36” (Stainless Steel)
Speedy Mixer, 61/4” x 30” (Galvanized)
Price
50.00
18.00
20.00
48.00
53.00
30.00
www.demandproducts.com • 1-800.325.7540
25
M525
ORIGINAL DURARASP
CI
TOOL
y
ted b roducts
n
e
v
In and P
Dem
DR614
DR814
Original DuraRasp™
12-Grit Tungsten Carbide Rasp
TC614
TC814
DR414
• Heavy Brazed #12 Tungsten Grit
• Non-Gouging Rounded Corners
• Custom Crafted and Serial Numbered
• Lasts 100 Times Longer than Rasp Paper
• Soft-Grip Handle
Item #
DR214
DR414
DR614
DR814
DR214
Description
2” x 14”
4” x 14”
6” x 14”
8” x 14”
Tiger Claw DuraRasp™
TC414
For Rasping, Cutting,
Shaving EPS Foam
• Heavy Brazed #12 Tungsten Grit
• Non-Gouging Rounded Corners
• Custom Crafted and Serial Numbered
• Lasts 100 Times Longer than Rasp Paper
• Soft-Grip Handle
All the Features of the DuraRasp™, Plus...
26
Item #
TC414
TC614
TC814
Description
The Tiger Claw™ 4” x 14”
The Tiger Claw™ 6” x 14”
The Tiger Claw™ 8” x 14”
Rasping
Cut-Off Saw
Shaves High Spots
TIGER CLAW
The Industry Standard
for Rasping EPS. Outlasts
Rasp Paper Over 100 to1
Soft-Grip Handle
with Finger-Flow Ribs
for Comfortable Control
Top Quality
Steel Plate
SM614
Smoothie™ DuraRasp™
24-Grit Tungsten Carbide Rasp
Item #
• Ornamental Shapes & Base Coats
SM614
• Custom Crafted & Serial Numbered
Rounded Corners
Description
6” x 14”Smoothie™
Registered Quality
In ten months of testing by professional contractors, paper
can’t begin to compare with the dramatic performance of the
DuraRasp! 12-grit proved to be only marginally better than
16-grit, but still no comparison to the DuraRasp.
Edger Rasp™ DuraRasp™
2-Sided Tungsten Carbide Rasp
• Heavy
#12 Tungsten Grit
• Soft-Grip Handle
Item #
DE614
Description
6” x 14”Edger Rasp™
Foam Shaving Curry Comb
A Demand Products Innovation
• Reversible Smooth or Sharp Point Pattern
• Grip-It Polypropylene Handle
• Custom Crafted and Serial Numbered
• Shank Pin Allows Comb to Reverse Easily on Handle
• Finished Combs are Lacquer Dipped for Durable Finish
Item #
CC15S
Perfect for Hard to Reach Areas
Description
Foam Shaving Curry Comb
www.demandproducts.com • 1-800.325.7540
27
SHOP VAC
Weighs
Only
2.5 lbs
DuraVac™ Rasp
Specifications
Dimensions: 7”W x 15”L
Rasp Surface: 6” x 14”
Hose Size : 11/2”
Vacuum Hand Rasp
• Lightweight
• Removes EPS Dust Quickly
• Weighs Just 2.5 Pounds
• DuraRasp™ Plate Delivers Long Life
•Constructed of Lightweight
Commercial Weight Aluminum
• Connects to any Commercial Vacuum
Item #
KITDVH
VRP614
Description
Hand Vacuum DuraRasp™
Vacuum DuraRasp™
Replacement Plate, 6” x 14”
Shop•Vac®
Vacuum Back Pack
BPVAC
• Commercial 2 HP Two Stage Motor
• Lightweight 93/4 Lbs
• 7 Quart Tank Capacity
• 5’ Locking Hose Plus Wands
• 50 Foot Power Cord
KITAE818
Air Fittings Not Included
Requires 6 CFM @ 75 PSI
Air Express™ Uses Adhesive Rasp Paper
Note: Rasp Not Included
Item #
BPVAC
BPVACP01
Description
Shop•Vac® Back Pack Vacuum
Replacement Bgs (pack of 5)
48” DuraRasp™
Tungsten Carbide Rasp
• Custom Crafted
• Heavy Epoxyed #12 Tungsten Grit
• Lasts 100 Times Longer Than Rasp Paper
Item #
DR448
28
Description
DuraRasp™ 48”
Price
245.00
• Weighs 5.3 lbs.
• Air Fittings Not Included
• Requires 6 CFM @ 75 PSI
Item #
Description
Price
KITAE818
Air Express™
325.00
Adhesive Rasp Paper
Rasp Paper, 8” x 18”
12-Pack of ARP818
DR448
16-GRIT
ARP818
KITARP818
12-GRIT
ARP81812
KITARP81812
Price
225.00
85.00
RASP PAPER
AS814
Rasping Tools Standard Hand Rasp
• High Quality Aluminum Plates
• 16 Grit Adhesive Paper
Item #
Description
Price
AS414
AS614
AS814
Aluminum Standard Rasp, 4” x 14”
Aluminum Standard Rasp, 6” x 14”
Aluminum Standard Rasp, 8” x 14”
21.00
24.00
28.00
CI
TOOL
AS414
AS614
Rasp Paper Adhesive Rasp Paper
12-Grit Rasp Paper
Item #
ARP41412
KITARP41412
ARP61412
KITARP61412
ARP81412
KITARP81412
ARP81812
KITARP81812
16-Grit Rasp Paper
Desciption
Rasp Paper, 4” x 14”
Rasp Paper, 12 Pack, 4” x 14”
Rasp Paper, 6” x 14”
Rasp Paper, 12 Pack, 6” x 14”
Rasp Paper, 8” x 14”
Rasp Paper, 12 Pack, 8” x 14”
Rasp Paper, 8” x 18”
Rasp Paper, 12 Pack, 8” x 18”
Price
3.40
36.00
5.04
55.00
6.80
80.50
8.69
88.00
Item #
ARP414
KITARP414
ARP614
KITARP614
ARP814
KITARP814
ARP818
KITARP818
Description
Rasp Paper, 4” x 14”
Rasp Paper, 12 Pack, 4” x 14”
Rasp Paper, 6” x 14”
Rasp Paper, 12 Pack, 6” x 14”
Rasp Paper, 8” x 14”
Rasp Paper, 12 Pack, 8” x 14”
Rasp Paper, 8” x 18”
Rasp Paper, 12 Pack, 8” x 18”
Bulk Rasp Paper Non-Adhesive Rasp Paper
16-Grit Rasp Paper
Item #
BRP250
BRP450
BRP650
BRP850
Description
Bulk Rasp Paper, 2” x 50 yds
Bulk Rasp Paper, 4” x 50 yds
Bulk Rasp Paper, 6” x 50 yds
Bulk Rasp Paper, 8” x 50 yds
12-Grit Rasp Paper
BRP850
BRP650
BRP450
BRP250
Item #
BRP25012
BRP45012
BRP65012
BRP85012
Description
Bulk Rasp Paper, 2” x 50 yds
Bulk Rasp Paper, 4” x 50 yds
Bulk Rasp Paper, 6” x 50 yds
Bulk Rasp Paper, 8” x 50 yds
www.demandproducts.com • 1-800.325.7540
29
CLEANERS
Finish-Up™
FU1
Gentle EIFS Cleaner
Gentle
• Cleans and Removes Stucco From Tools
• Removes Stucco From Concrete, Brick, Glass & Wood
• Does Not Damage Painted or Anodized Finishes
KITFUS
Item # Description
FUS
Finish-Up™ Spray, 14 oz.
KITFUS Finish-Up™ Spray, per case of 12
FU1
Finish-Up™, 1 gallon
FUS
Price
9.50
108.36
51.00
Off-Base™
Powerful EIFS Cleaner
Powerful
• Removes Hardened Synthetic Stucco
• Cleans and Removes Stucco From Tools
• Removes Stucco From Concrete, Brick, Glass & Wood
• Not for Use on Painted or Anodized Finishes
Item #
OBS
OBS
KITOBS
OB1
KITOBS
Description
Off-Base™ Spray, 13 oz.
Off-Base™ Spray, per case of 12
Off-Base™, 1 gallon
Price
10.95
124.83
85.00
OB1
Wash Down 2™
Tar - Rid ™
EIFS Wall Cleaner
• Safely Removes Algae & Red Mud
• Great General Cleaner
Item #
WD1
Description
Wash Down™, 1 gal.
Price
35.00
A Word About Chemicals
Removes Tar, Mastics,
Grease and Oil
Item #
TR1
Description
Tar-Rid™, 1 gal.
Price
47.75
Efflorescence Remover
Removes Efflorescence From
Brick, Stone, Concrete & Block
We suggest you follow the instructions carefully.
• Contains Hydrochloric Acid
• Etches Concrete, Removes
We also recommend that you select a small
inconspicuous area to test the chemicals and
confirm the results for satisfaction before applying
them to the job. Chemicals cannot be returned.
ER1
Chemicals react differently on various materials.
30
Efflorescence Bleeding and Dissolves
Scale & Corrosion
Item # Description
Price
Efflorescence Remover 32.00
Chemicals are Prohibited on all International and Domestic Air Shipments
ADHESIVES
Foam-Lok™ Adhesive
Foam-Lok™ Adhesive
Self Contained Pressurized Systems
EPS Anchor-In-a-Can
• Adheres EPS to EPS
• Fast Setup Time — 5 Minutes*
• Spray Cans Material is Clear Colored
• Does Not Degrade the EPS
• Excellent for — Construction, Signs,
• Solvent Based
• Green Tinted
• Coverage: Approx. 3,500
FLA30
Sq. Ft. per Container
Theater, Arts & Crafts, Packaging, Florists,
and 100’s more
Item #
FLAS
KITFLAS
• Does Not Degrade EPS
Foam
• Fast Setup Time
Description
Foam Lok™ Adhesive Spray 17.25 oz
Foam Lok™ Adhesive, per case of 12
5 Minutes*
Solvent Based
Item #
Description
FLA30
30 Gallon Tank, Solvent Based
Price
450.00
• Approx. Drying Time is 5-20 minutes*
• Covers Approxmately 3,500 s.f. per container
Shapes
Tilt-Up Walls
Theater
Signs
Chemicals are Prohibited
on all International and
Domestic Air Shipments
FLGN
Foam-Lok™ Adhesive
Item #
FLA5B
Description
Foam Lok™ Adhesive 5 Gal. Brushable
Just Pour Into a Container and
Brush On. Same Properties as
Foam-Lok™ Spray.
FLAH
Item #
Description
FLGN
FLAH
Spray Gun Nozzel
Spray Gun Air Hose
*Foam-Lok™ will perform as intended– your results could differ if you
do not follow the directions. Also atmospheric conditions, temperature,
and thickness of application may vary the results. We suggest a trial
test with each application to determine acceptable results.
Blue Tinted
Foam Glue
• Bonds Most Types of Foam Together Including Styrofoam
• Has Instant Grab But Still Allows Time for Repositioning
• Bonds Paper, Fabric, Wood, Almost Anything to Foam
• Water Based & Non-toxic
• Non-flammable
Item #
BAHFG2
BACFG2
Description
Hold The Foam, 2 oz.
Craft Foam Glue, 2 oz.
www.demandproducts.com • 1-800.325.7540
31
ENERFOAM
Free
FGUN2
*with the Purchase
of a Case of EnerFoam
42 or EnerFoam 25
EnerFoam™ 42
Filler and Adhesive-In-One
• Performs as a Foam Adhesive and
a Filler
• Bonds Quickly to Almost Anything
• One Can is Equal to 40 Quart Tubes
of Adhesive
• Cures Initially in 10 Minutes
• Polyurethane Based
• 950 Lineal Feet at 1/2” Bead
Adhesive
EnerFoam™ 25
EnerFoam™ 24
• Same as Enerfoam™ 42
• No Gun Required. Straw
• Cures Initially in 10
• Same as Enerfoam™ 42
• Polyurethane Based
• 712 Lineal Feet at 1/2”
• Cures Initially in 10
Filler &
Adhesive-In-One
Except Smaller Container
Minutes
WeatherProofing
Bead
• Controlled Dispensing
ICF Construction
Filler &
Adhesive-In-One
Dispenser
Except Smaller Container
Minutes
• Polyurethane Based
• 712 Lineal Feet at 1/2”Bead
Item #
Description
ENER42
KITENER42
ENER25
KITENER25
ENER24
KITENER24
30 oz. EnerFoam Can
30 oz. EnerFoam Cans (cs of 12) w/Gun*
24 oz. EnerFoam Can
24 oz. EnerFoam Cans (cs of 12) w/Gun*
24 oz. Straw EnerFoam Can
24 oz. Cans (cs of 12)
Price
19.99
235.00
15.99
189.00
15.99
189.00
Sealing
EnerFoam™ 42 Junior Kit
EnerFoam™ 42 Starter Kit
EnerFoam™ 42 Master Kit
• 6 Cans of 30 oz. Enerfoam™ 42
• 1 Dispensing Gun - FGUN2
• 1 Can of Enerfoam Cleaner
• 2 Cans of 30 oz. Enerfoam™ 42
• 1 Dispensing Gun - FGUN2
• 1 Can of Enerfoam Cleaner
• 12 Cans of 30 oz. Enerfoam™ 42
• 1 Dispensing Gun - FGUN2
• 2 Cans of Enerfoam Cleaner
Item #
ENER42JK
Item #
ENER42SK
Item #
ENER42MK
Filler and Adhesive-In-One
32
Description
42 Junior Kit
Filler and Adhesive-In-One
Description
42 Starter Kit
Filler and Adhesive-In-One
Description
42 Master Kit
FIREBLOCK
Great Stuff® Pro
Great Stuff® Pro
• Bonds to Most Building Materials
• Seals Gaps to 3”
• Fireblock Sealant
• Airtight Foam Water Resistant
• Low Pressure Formulation
• Controlled Dispensing
• Performs as a Foam Adhesive
• One Can is Equal to 16 Quart Tubes of Adhesive
• Cures Initially in 10 Minutes
• Reduces Squeaks
• Polyurethane Based
• 600 Lineal Feet at 1/2” Bead
Gaps and Cracks Insulation
Item #
KITGSTUFF2
Description
Case of 12 w/Gun
Wall and Floor Adhesive
Price
210.00
Item #
GSTUFF3
KITGSTUFF3
*Free FGUN2 with the purchase of a case of Great Stuff Pro
Handi-Foam®
Fireblock
Description
Single 26.5 oz Can
Case of 12 w/Gun
Price
22.95
270.00
Handi-Foam Spray Foam Fire Block is the most economical, convenient
and effective method for installing Building Code mandated Fireblocking
in wood frame residential construction.
Foam Sealant
• Fills Gaps Around Pipes, Vents,
Ducts and Fills Open Spaces
• One 24 Oz. Can is Equal to 30
Quart Tubes of Caulk
• T-Value of 4-5 Per Inch Cured
• Orange Color-Coded Foam for
Easy Jobsite Inspection
• Passes ICC-ES Evaluation
Item #
HA24FB
KITHA24FB
Fireblock for Residential
Construction
• Woods and Solids Materials
• UL Classified R-13919 (Flame
Spread 25, Smoke Developed 50)
• Meets ASTM E-*$ Class 1 Specs
• Not For Use As A Firestop in
Commercial Fire Rated Walls
Description
24 oz. Fire Block
Case of 12 w/Gun
EnerFoam Cleaner
Item #
ENER10
KITENER10
Description
12 oz EnerFoam Cleaner
12 oz Cleaner (case of 12)
Price
11.95
#FGUN2
135.00
Economy Gun
Economy Gun
Item #
FGUN2
Description
Economy Gun
Mid-Range Gun
Item #
ENER14
Description
Mid-Range Gun
Free
Price
32.95
FGUN2
Dispenser Gun
#ENER14
Mid-Range Gun
with Each Case of
12 Cans
Price
80.00
www.demandproducts.com • 1-800.325.7540
33
RAINTEK
Universal Kickout Flashing
Eliminates FieldFabrication Errors
• Saves Time & Money
• Eliminates Field Fabrication Errors
• Cures Galvanic Concerns
• Flexible for Retrofits
• Installs in Just Seconds
• Handles all Temperature Extremes
• Custom Molded Fabrication
• Cuts Easily with Scissors
• Contractor’s Choice since 1998
• 6” x 6” x 12”
4 Designer Colors:
Classic
Gray
Cuts Easily with Scissors
Flexible for Retrofits
Item #
UKOL
UKOR
UKOLW
UKORW
UKOLB
UKORB
UKOLT
UKORT
Colonial Woodland Desert
White
Brown
Tan
Description
Gray Universal Kickout Left
Gray Universal Kickout Right
White Universal Kickout Left
White Universal Kickout Right
Brown Universal Kickout Left
Brown Universal Kickout Right
Tan Universal Kickout Left
Tan Universal Kickout Right
Price
8.95
8.95
8.95
8.95
8.95
8.95
8.95
8.95
WATERALLEY APPLICATION
Super Caulker Fast and Efficient
Water Alley 516™
Drainage Wall Mat
WaterAlley 516 for EIFS
• Geotextile Fabric Bond to One Side
• 5/16” Core
Water Alley 716™
• Positive Control
• Hassle-Free Reload
• Auto Flow Stop
• Extra Long 10 1/2” Opening
• Steel Welded Frame
• Rotating Barrel Maintains Nozzel-toSurface Contact Angle
• Twin Trust Plates
• Rugged Aluminum Handle
Drainage Wall Mat
WaterAlley 716 for Stucco & Stone Veneer
• Geotextile Fabric Bond to Two Sides
• 7/16” Core and Code Compliant
Weather Resistive Barrier
Typical
WaterAlley
Application
34
Enlarged View
of Water Alley
Drainage Mat
Item #
CG100
Description
Super Caulker
Price
18.95
BACKER ROD
Backer Rod Joint Sealer
• Designed for Sealing EIFS Joints
• Resistance to Moisture and Freeze-Cycle Problems
• Conforms to Irregular Joints
• Non-absorbing Closed Cell Skin
• Dispenses Easily from Box to Joint
Price
Description
Backer Rod Handy Pack, 1/4” x 2,500’ 121.00
Backer Rod Handy Pack, 3/8” x 1,400’ 85.00
60.00
Backer Rod Handy Pack, 1/2” x 800’
50.00
Backer Rod Handy Pack, 5/8” x 550’
52.00
Backer Rod Handy Pack, 7/8” x 330’
92.00
Backer Rod Handy Pack, 1” x 550’
⁄”
58
SR78
SR58
Convenient Handy-Pak Box
⁄8”
3
SR38
Sof Rod ™ for glazing.
Sealant
Sof Rod™
* Other Sizes Also Available - Please Call
Glass
Item #
SR14
SR38
SR12
SR58
SR78
SR1
⁄8”
7
Sealant
Sof Rod™
Sof Rod ™in
expansion
joints
and similar
applications.
Sealant
Sof Rod™
Triangular Backer Rod Joint Sealer
• Designed for Sealing EIFS Joints
• Conforms to Irregular Joints
• Non-absorbing Closed Cell Skin
• Adhesive Surface Holds Material in Place
• Resistance to Moisture and Freeze-Cycle Problems
Item #
TBR14
Description
1,800 Feet Roll
TBR14
Price
327.90
Delmhorst™
Moisture Meter
Digital Probe Tester
• Reads Moisture Content from 6 - 40%
• Averages Up to 50 Accumulated Readings
• Audible Set Point Sounds When Preset
Percentage is Reached
• Comes with 31/4” Probes
Item #
BD2100
BD2P00
BD2P04
Description
Digital Moisture Meter
Standard Probe 31/4”, each
Long Probes 6”, Pkg. of 4
DOW Caulk
Contractors Weatherproofing
Sealant
One-part, moisture cure that provides
durable, flexible, watertight joints &
offers outstanding unprimed adhesion
to non-porous substrates.
CASE 0F 12
COLORS - WEATHERPROOFING SEALANT
ANTIQUE
white
BLACK
LIMESTONE
SANDSTONE
BRONZE
GRAY
WHITE
Item #
Description
Item #
Description
CWSAW
CWSBL
CWSBRZ
CWSGRY
CWSL
CWSSS
CWSW
Antique White
Black
Bronze
Gray
Limestone
Sandstone
White
CWSAW-12
CWSBL-12
CWSBRZ-12
CWSGRY-12
CWSL-12
CWSSS-12
CWSW-12
Antique White
Black
Bronze
Gray
Limestone
Sandstone
White
Backer Rod Installer Kit
Installs Backer Rod Quickly
• Comes with 4 Size Wheels for Level Surfaces
• Comes with 4 Size Wheels for Unlevel Surfaces
• Sets Perfect Depth Every Time
• Spade Handle for Smoothing Sealant
Item #
QRT100
Description
Quick Rod Installer
Price
95.00
10 OZ
Both tools come in this kit
Uneven
SurfaceTool
Level
Surface Tool
QRT100
www.demandproducts.com • 1-800.325.7540
35
TAPES
Red Stucco Tape
Silver Duct Tape
LMR2
60-Day Red Tape
Duct Tape
• Good for Porous Concrete and Rough Surfaces
• Good General Utility Tape
• UV Protectors Insure Long Exposure Life
• Aggressive Adhesive Sticks to Almost All Surfaces
• Leaves No Residue if Removed Within 60 Days
Item #
LMR2
KITLMR2
Description
2” x 60 yds. (per roll)
2” x 60 yds. (case of 24)
DT307
Item #
DT307
KITDT307
Price
7.25
170.00
Description
2” x 60 yds. (per roll)
2” x 60 yds. (case of 24)
PROTECTIVE FILM
Blue Window Film
90-Day Blue Protective Film
• Protects Glass and Metal Window Frames
• Leaves No Residue • Removes Easily
Item #
BT12
BT24
BT36
Description
Blue Tac Tape, 12” x 600’
Blue Tac Tape, 24” x 600’
Blue Tac Tape, 36” x 600’
Price
60.00
90.00
120.00
BT12
BT24
BT36
Other Sizes Avalable Upon Request
BARRIER WRAP
Vortec™ Protective Barrier Wrap
For Residential and Commercial Projects
• Beats (or meets) Tyvek® On Every Test
• 365 Day UV Exposure Rating
• Non-Directional Drain Channels
• Can Be Installed In Any Direction
Item #
V5200
Description
Vortec Drainage Mat, 5’ x 200’
Non-directional dimple pattern
means Vortec™ can be installed
in any direction, reducing install
time and vitrually eliminating
product waste.
36
BARRIERS
EIFS Window/Door Tape
Secondary Weather Barrier
Tape with Fiber Weave Back
• Recommended for Use with a House Wrap
• 30 Mil Thick Composite Membrane:
4” or 9” x 100’ per roll
• Prevents Splash-Back
• Self Adhesive
• Should be Used Around Windows, Doors, or Any Structural Opening
• Use Before Applying EIFS or Stucco
Fiber Weave
Item #
Description
KITETAP4
KITETAP9
4” Wide Window / Door Tape - Case of 12
9” Wide Window / Door Tape - Case of 4
Price
355.00
245.00
6” & 12” Also Available
EIFS Tape
EIFS
Tape
EPS or
Substrate
Base Coat
House
Wrap
Wrap Before
Window
Install tape across the
sill and jams. Overlap
at least 2” horizontally
and 6” vertically. Overlap
house wrap.
CI
EIFS
Tape
House
Wrap
Wrap After
Window
After window installation,
tape the top of the window,
then fold house wrap over
the tape and tape the flap
at its outer edges.
SECONDARY WEATHER BARRIER
TOOL
WaterBlock™ Weather Barrier
Secondary Weather Barrier
with Vinyl Backer
BWBC6
Outside Corners
Inside Corners
• Flexible Flashing Membrane
• 25 Mil Thick Composite Membrane
• Use Around Windows, Doors, or Any
Structural Opening
• Tape Sheathing Joints
• Self Sealing
• Self Adhesive
Item #
Description
KITBWB4
4” Wide WaterBlock Weather Barrier
Case of 9*
6” Wide WaterBlock Weather Barrier
Case of 6*
9” Wide WaterBlock Weather Barrier
Case of 4*
Corner Guard Flashing, each
KITBWB6
KITBWB9
Corner
Guard
Window
Flashings
Door
Flashings
BWBCG
Typical Corner
Guard Installation
Price
* Each Roll Is 75 Feet Long
Sheathing Splashback Area
Deck to Wall Flashing
www.demandproducts.com • 1-800.325.7540
37
187.00
187.00
187.00
3.95
DRAINAGE
Starter Trac®
Drip Edge
Casing Bead
Windows/Doors
• Use at base of wall or around doors &
windows
•1 ¾” to 3” wide nailing flange available
• ½” to 4” depth available
• Splice Plates Included
• Window or door drip edge
• Sloped front edge sheds water
• 2” wide nailing flange
• 3/4” to 4” depth available
Item #
PCST1
Quantity
25 per box
Description
1” x 10’
Item #
PCSB15
Price
Call
WHITE
Starter Trac®
GRAY
Continuous Vent
• Use at base of wall
• Base shelf has holes 3” on center
• 3” wide nailing flange
• ½” to 4” depth available
• Face flange is 1 ¼”
• Splice Plates Included
• 2 5/8” to 4” vented area available
• 14 sq. inches air flow per lineal foot
• 3/8” to 1 ½” ground available
• Splice Plates Included
Item #
Description
PCSTDE1
1” x 10’
Item #
PC548-1
Quantity Price
25 per box Call
Description
Soffit Vent
Quantity Price
10 per
Call
Sill Screed
Starter Trac®
• Now available in three colors
• ½” to 1 ¼” ground available
• 2 ½” or 3 ½” nailing flange available
• Use at base of wall
• 3” wide nailing flange
• ½” to 4” depth available
• Splice Plates Included
Item #
PC632
Item #
Description
PCST1WP
1” x 10’
Colored Foundation
Description
1” x 10’
WHITE
Weep Holes
Quantity Price
25 per box Call
TAN
GRAY
Fixed-Flashing Style Low Profile
Recessed Electrical Box
• Clear Smoked Weatherproof Cover
• Superb Moisture Control
• One Piece Molded Design
• Fixed Flashing for 1/2” EIFS & Stucco Systems
• Disposable Mud Cover for Stucco and Painting
• Complete with Duplex and GFI Plates
CALL FOR PRICING ON ITEMS NOT SHOWN
Wide Self Flashed
Nailing Flange
Description
Clear, Fixed Flange In Box
White, Fixed Flange In Box
Free Mud Cover for
Stucco & Painting
Eliminates the need for separate flashing
38
TAN
Price
Call
Soffit Vent
with Drip Edge
Item #
PCDRIBOX
PCDRIBOXW
Quantity
60 per box
Description
11/2” x 10’
Quantity Price
25 per box Call
(VARIED SIZES AND LENGTHS)
DOOR
NG
LI
#
1 SE
L
ACCESS DOORS
Universal Access Door
• #1 selling door
• Flush for all surfaces
• Rounded corners – safe & aesthetic
• Continuous, concealed hinge
• Available in Steel or Stainless Steel
Item #
Description
UF5000
Universal Access Door
Recessed GFRG Door
For Plaster & Drywall
Recessed Stucco &
Plaster Door
• For plaster and drywall ceilings
• Tapered edge for joint tape
• Lightweight
• Blends into surrounding finish
• Door panel recessed 5/8” and lined
with self-furring galvanized lath
• Expansion casing bead with 3” wide
galvanized lath, recessed 3/4” to
receive plaster
• Concealed, pivot hinge
Item #
Description
GFRG
Acoustical Tile Door Panel
Item #
*CALL FOR PRICING AND DIMENSIONS
Description
AP5010 Recessed Stucco Door Panel
Fire Rated
Fire Rated
Fire Rated Wall Door
Ceiling & Wall Door
Plastic Access Door
• Fire rated door for walls
• 1 1/2 hr. U.L. “B” label
• Concealed hinge
• Available with galvanized
steel drywall bead flange
• Available in Steel or Stainless Steel
• Standard with self latching bolt
• Warnock Herfsey Int., 3 hr. rated for ceilings
• Door panel is insulated and gasketed upswing
• Coil spring to control closing of door panel
• “L” handle - operable from inside
• Flush for all surfaces
• High impact styrene plastic with U.V.
stabilizers
• Hinged door panel with removable feature
• High Quality at economic pricing
Item #
Description
Item #
Description
Item #
Description
FB5060
Fire Rated Access Door
FW5050
Ceiling Access Door
PA3000
Plastic Access Door
STUCCO SPLATTER & GUN
Splatter Stucco Machine
2 Quart Capacity
Stucco Spray Hopper Gun
4 hole model
• Used to Apply Color Coat,
Acoustic and Drywall Mud
• Lighweight and Durable
• Can Match Most Surfaces
• 2 Quart Capacity
• Hopper Made from Stainless Steel Material
• Lifetime Anti-rust Guarantee
• Slide Out 4 Hole Spray Tip Plate
• 4 Removable Stainless Steel Air Jet Nozzles
• Swivel Between Handle and Hopper
Item #
SSM2
Air compressor information: We recommend to use
12 cfm @ 100 psi gas power air compressor or electric
with 30 gallons or larger air tank.
Description
Stucco Machine
Price
69.95
Item #
HG5
Hopper Gun
2 Gallon Capacity
HG1
Sprays: Mill Mixes,
Acoustics,
Drywall Mud,
Glitter,
Waterproofing,
EIFS and More.
Item #
HG1
KITLMT468
Requires
minimum of
2.4 CFM
@ 90 PSI
Description
Superior Hopper Gun w/ 3 Tip, 2 gal.
4,6,8 mm Spray Tips & Brass Collar
Description
Stucco Hopper Spray Gun
www.demandproducts.com • 1-800.325.7540
39
TROWELS
Golden Stainless Steel Trowel
by Marshalltown™
• Wood Camel Handle
• Golden Stainless Steel
Item #
Description
43/4” x 11”
5” x 12”
5” x 13”
5” x 14”
5” x 16”
T511M
T512M
T513M
T514M
T516M
Permashape Golden Stainless Trowel
Price
37.50
38.95
40.25
42.95
46.25
Hand-Made Inox Venetian
Plastering Trowel
by Marshalltown™
Item #
VPT49
Item #
Description
43/4” x 11”
5” x 12”
5” x 13”
• Dura-Soft Handle
5” x 14”
• Golden Stainless Steel
5” x 16”
T511DS
T512DS
T513DS
T514DS
T516DS
• Soft Handle
• Rounded Corners
Description
3.9” x 9.5”
• INOX Stainless Steel
Other Sizes Available
Venetian
Plastering Trowel
Stainless Pool Trowel
by Marshalltown™
Item #
TP516
Item #
VPT37
Description
41/2” x 16”
Pocket Trowel
• 6 Blades in 1
• Unique Locking Mechanism to Anchor the
Blades Together
• Easy Access for Blade Selection
• Easy to Clean Stainless Steel Blades
• Versatile Enough to Reach the Hardest Places
40
Item #
Description
PT6
Pocket Trowel
Description
3” x 8”
• Soft Handle
• Rounded Corners
• Stainless Steel
DARBIES & TROWELS
Notched Stainless Steel Trowels
Notched Trowels
Item #
TRNT2
Description
Price
Rounded, 1/4” x 1/4” x 11/2” 25.50
Item #
Description
Price
Rounded, 3/8” x 1/2” x 11/2” 25.50
TRNT3
Item #
Description
Rounded, 1/2” x 1/2” x 2”
TRNT4
Item #
• Dura-Soft™ Handle
• Accurately Notched to EIFS Manufacturers’ Specifications
• 7 Shapes to Choose From
• Highest Quality Stainless Steel
Price
25.50
Description
Price
Rounded, 3/16” x 3/8” x 13/4” 25.50
TRNT5
Item #
TRNT9
Description
Rounded, 5/8” x 5/8” x 1”
TRNT9
Item #
Description
Rounded, 5/16” x 5/16” x 3/4”
TRNT10
Item #
TRNT11*
Description
Square, 3/8” x 3/8” x 3/8”
TRNT2Rounded, 1⁄4” x 1⁄4” x 11⁄2”
TRNT3Rounded, 3⁄8” x 1⁄2” x 11⁄2”
TRNT4Rounded, 1⁄2” x 1⁄2” x 2”
TRNT5Rounded, 3⁄16” x 3⁄8” x 13⁄4”
TRNT9Rounded, 5⁄8” x 5⁄8” x 1”
TRNT10Rounded, 5⁄16” x 5⁄16” x 3⁄4”
TRNT11*
Square, 3⁄8” x 3⁄8” x 3⁄8”
Dimensions are: Width x Depth x Spread.
*Carbon Steel
Stub Nails & Hammer
Stucco Stub Nails & Magnetic Hammer
• 3/8”,1/2” Stub Nails for Stucco Lath
• Hammer has — Steel Shank, Rubber Handle
MAGHAM
and Magnetic Tip
MAGHAMPO1
Rub Brick Great for Hardened Stucco
Item #
RB631
Description
Rub Brick 6” x 3” x 1”
Price
13.95
“h” Darbies
Smoothly Levels Hard Coat
Over Long, Straight Areas
Item #
MD4
MD6
MD8
Description
4’ Magnesium Darby
6’ Magnesium Darby
8’ Magnesium Darby
Item #
MAGHAM
SN38
SN12
MAGHAMP01
Description
Magnetic Stub Nail Hammer
3/8” Stub Nails (50 LB. Box)
1/2” Stub Nails (50 LB. Box)
6” Magnetic Hammer Tip
4 1/2ʺ
“h” Darbie
www.demandproducts.com • 1-800.325.7540
41
Price
50.00
310.00
350.00
19.95
FLOATS
Private Label Program
Special Chemical-Resistant Labels that Outlast
Printed/Stamped Versions. 24 Available Colors.
F600
ABS Float
• 5” x 11”
• ABS Plate
• Solid-Grip Comfort
1” x 3” Laminated Label
Call for More Details
Textured Handle
Item #
F600
Minimum Order of 120
Mix & Match Any on Pages 42 & 43
Description
ABS Float
F400 Rounded
Edge Float
F900
European Float
Item # Description
Rounded Edge
F900
Item # Description
Price
European Float 8.50
F400
• America’s Favorite
• Tapered Coned Handle
• Rounded Corners
• 5” x 11”
• 51/2” x 11”
• ABS Plate
F400R NKI Float
Item #
F400R
Description
NKI Float
F650 NKI Float
Item #
F650
Description
NKI PVC SOFT GRIP
• 51/2” x 11”
• ABS Plate
• 21/2” x 11”
• PVC Plastic Plate
42
• PVC Plate
• 51/2” x 11”
F850
Italian Finish Float
F800
Italian Finish Float
Item # Description
F850 Italian Float
F800
Item # Description
Italian Float
• 5” x 11”
• PVC Plastic Plate
FLOATS
Stucco Sponge Float 3/4” & 1” Thickness
• Ideal for Bringing Aggregate to the Surface
• The Most Popular for All Stucco Applications
• 12” x 5” with Wood Handle
Floats:
Item #
Description
3/4” Fine Pad
1” Fine Pad
1” Course Pad
F125
F130
F135
Price
5.95
5.95
5.95
Replacement Pads 6 Pack:
Item #
GPAD6
GPAD61
GPAD6C
Description
Pad 6 Pack
Pad 6 Pack
Pad 6 Pack
Price
12.95
12.95
12.95
F150 White Sponge Float
1” Soft Texture
• Retains Water and Provides a Smoother Finish
• 12” x 5” with Wood Handle
Item #
F150
WPAD6
Description
White Sponge Float
Replacement Pads 6 Pack
Price
5.95
12.95
F250 Texture Float
Texture Pattern Face
• 51/2” x 11”
Item #
F250
Description
Texture Float
Price
5.75
F500 Rib Float
FT511 Composite Float/Trowel by Marshalltown
• Comfortable Contour Wood Handle
• Composite Plate
• 5” x 11”
Item #
FT511
Description
Float / Trowel
Stiffer Than Normal
• 51/2” x 113/4”
• Ribs Make Plate a Little Stiffer Than Normal
Item #
F500
Description
Rib Float
Price
21.00
Riveted Plate
www.demandproducts.com • 1-800.325.7540
43
EDGERS
T613
T612
T611
T610
T609
Stainless Outside Corner Edgers
5 Sizes of Detailed Corner Edgers
• Leaves a Professional Clean Edge
Item #
T609
T610
T611
T612
T613
KITOCE
Description
1/2” Stainless OUTSIDE Corner Edge
3/4” Stainless OUTSIDE Corner Edge
1” Stainless OUTSIDE Corner Edge
1 1/2” Stainless OUTSIDE Corner Edge
2” Stainless OUTSIDE Corner Edge
OUTSIDE Corner Edger Kit (All 5)
Stainless Inside Corner Edgers
5 Sizes of Detailed Corner Edgers
• Leaves a Professional Clean Corner
T603
T602
T601
T600
T599
Item #
T599
T600
T601
T602
T603
KITICE
Description
1/2” Stainless INSIDE Corner Edge
3/4” Stainless INSIDE Corner Edge
1” Stainless INSIDE Corner Edge
1 1/2” Stainless INSIDE Corner Edge
2” Stainless INSIDE Corner Edge
INSIDE Corner Edger Kit (All 5)
Price
10.50
10.50
10.50
10.50
10.50
49.85
STUCCO RAKES-SCRATCH EFFECT
Plastic Handle
Comfortable
Sculpted
Handle
Soft-Grip
Handle
SRAKESG
44
SRAKE
Stucco Scratch-Coat Rakes
Your Choice of Two Handles
• High Quality Tension Steel
Item #
SRAKE
SRAKESG
Description
Stucco Rake - Sculpted Handle
Stucco Rake - Soft-Grip Handle
Price
14.85
14.85
TROWELS
T515
T520
T530
T535
Margin Trowels
Wood Handles
Item #
T515
T520
T530
T535
KITMT
Description
Margin Trowel, 11/2” x 5”
Margin Trowel, 2” x 5”
Margin Trowel, 2” x 6”
Margin Trowel, 2” x 8”
All 4 Sizes in Kit
Price
10.00
10.50
11.00
13.00
42.00
Stainless Margin Trowels
3 Sizes
• Clean Sharp Edges
• Stainless Steel Construction
Item # Description
Stainless Steel MarginTrowel, 11/2” x 35/8”
Stainless Steel Margin Trowel, 2” x 4”
Stainless Steel Margin Trowel, 11/2” x 7”
All 3 Sizes in Kit
TS1
TS2
TS3
KITTS
TS1
TS2
TS3
Stainless Detail Trowels
2 Sizes — Pointed & Rounded
• The Perfect Pair to Buy
• Stainless Steel Construction
Item # Description
Price
TPD1 Stainless Pointed Detail Trowel
6.75
TRD2 Stainless Rounded Detail Trowel 6.75
TPD1
TRD2
www.demandproducts.com • 1-800.325.7540
45
SCOOPS
Baltic Scoop
Scoop Trowel Tool
• Eliminates the Hawk
• Scoops an Even Trowel Full Every Time
• Bucket Hanging Clip for Easy Storage
• Galvanized Steel Construction
Item #
TBSH7
Description
Baltic Scoop
Price
16.75
Super Scooper
EIFS Contractors
Most Requested Scoop
• Unique Design Scoops the Bucket Clean
• One Scoop Full Fills Your Hawk Perfectly
• Break Resistant Aluminum Construction
• Long Handle Saves Your Back
Item #
BS10
Description
Super Scoop
Price
22.25
The Scoop
Bucket Trowel
Plastic Scoop
• One Scoop Fills Your Hawk
• Easy to Clean
Item #
SCOOP
Description
The Scoop
Price
8.75
Bucket Dredger
Plastic Dredger Scoop
• One Scoop Fills Your Hawk
• Easy to Clean
Item #
BDRE
46
Description
The Scoop
Price
8.75
European Standard
• High Quality Stainless Tapered Scoop
• Goose Neck Handle Design Stores Easily
on the Rim
• Flat Surface Wipes Clean
Item #
T700
Description
Bucket Trowel
Price
14.00
HAWKS
Hawks
Wood or Soft Grip Handle
Aluminum with Wood or Soft Grip Handle
Item #
TAH8S
TAH8
TAH132S
TAH13
TAH132
TAH14
Description
Aluminum Hawk, 8” x 8”
ALUMINUM: SOFT HANDLE
Aluminum Hawk, 8” x 8”
ALUMINUM: WOOD HANDLE
Aluminum Hawk, 131/2” x 131/2”
ALUMINUM: SOFT HANDLE
Aluminum Hawk, 13” x 13”
ALUMINUM: WOOD HANDLE
Aluminum Hawk, 131/2” x 131/2”
ALUMINUM: WOOD HANDLE
Aluminum Hawk, 14” x 14”
ALUMINUM: WOOD HANDLE
Magnesium with Wood or Soft Grip Handle
Item #
Price
28.00
TMH13S
18.50
TMH14S
20.75
TMH13
26.25
TMH14
Description
Magnesium Hawk, 13” x 13”
MAGNESIUM: SOFT HANDLE
Magnesium Hawk, 14” x 14”
MAGNESIUM: SOFT HANDLE
Magnesium Hawk, 13” x 13”
MAGNESIUM: WOOD HANDLE
Magnesium Hawk, 14” x 14”
MAGNESIUM: WOOD HANDLE
SOFT GRIP HANDLE
Price
44.00
49.00
45.50
50.95
WOOD HANDLE
Composite Hawk
Unique New Design
Especially for EIFS
Control Fibers Prevent Stucco Cracks
• Designed Especially for EIFS
• Won’t Warp or React to Caustic Materials
• DuraSoft™ Handle
• Sponge Collar to Prevent Calluses
• Made of a Unique Composite Material
• 12” x 12” Platform
• Great for EIFS and Hardcoat Stucco
Item #
CF1
KITCF1
CF50
Description
Control Fiber Pkg. 3.5 oz.
Control Fiber Case (150 Pkgs.)
Control Fiber 50 lb Bulk Box
Item #
TCH12
Additional quantities available upon request.
B302
Description
Composite Hawk
B403
Brushes
Quality Brush Products
Item #
TB
TBR
B302
B403
TB
TBR
Description
Acid Brush with 8” Handle
Tampico Brush with 20” Handle
6” Tampico Bucket Brush (Plastic)
6” Tampico Bucket Brush (Wood)
www.demandproducts.com • 1-800.325.7540
47
KNIVES & BLADES
LC1
SOFT GRIPS
DC560
Soft Grip Knives
Professional Quality 3/4” or 1” Blades
Item #
LC34
LC1
DC560
LC34
Description
3/4” Soft Grip
1” Soft Grip
3/4”Razar Black
Tajima Knives
TM
Economy Breakaways
• Available in 3/4” & 1”
• Great Quality for Demanding Craftsman
• Comfortable Colorful Handles
Item #
T2
T10
D10
48
D20
T50
LCB50-RB
T2
T10
T50
D1
D10
D20
LCB30
LC303
LC303-D60
LCB50-RB
LCB50-RB50
D1
LC303
LCB30
Description
Heavy-Duty Knife, 3/4”
10-Pack Blades, fits T2, L2 & LC34
50-Pack Blades, fits T2, L2 & LC34
Xtra-Heavy-Duty Knife, 1”
10-Pack Blades, fits D1, H1 & LC1
20-Pack Blades, fits D1, H1 & LC1
10-Pack Blades, fits LC303
3/8” Precision Blade
3 Color 60 Pack
Razar Blk. Blades 10 pk. fits DC560
Razar Blk. Blades 50 pk. fits DC560
LC303-D60
KNIVES & BLADES
Olfa Knives
TM
Breakaways
• Best Breakaway Knives You Can Buy!
• 2 Sizes: 3/4” & 1”
• Distinctive Color Aids Visibility
Item #
L2
L5
LB
H1
HP
HB
Description
Olfa™ 3/4” Heavy Duty Knife
Olfa™ 5-Pack Blades, fits L2 & L2HS
Olfa™ 50-Pack Blades, fits L2 & L2HS
Olfa™ 1” Xtra-Heavy-Duty Knife
Olfa™ 5-Pack Blades, fits H1 & H1HS
Olfa™ 20-Pack Blades, fits H1 & H1HS
Price
9.45
5.99
28.49
16.99
7.49
26.49
L2
SOFT GRIPS
L5
LB
H1
HP
HB
L2HS
H1HS
Soft Grip Knives
Professional Quality 3/4” or 1” Blades
Item #
L2HS
H1HS
Description
3/4” Soft Grip
1” Soft Grip
Price
9.99
18.99
Insul-Knife
Multi-Purpose Foam Insulation Cutter
• Cut Foam Insulation Board with Precision and No Mess
• Cut Fiberglass Insulation with Ease
• Trim Expanded Foam Insulation Around Windows and Doors
• Cut Pipe Insulation, Sponge Foam and Much More
Item #
INSULKNIFE
Description
Insul-Knife
www.demandproducts.com • 1-800.325.7540
49
MESH MATES
Mesh Mates
3™
Mesh Mate Jr
Portable Job Site
Mesh Cutters
• Accepts All Meshes Up to 48” Wide • Portable Enough for Scaffolding
• Measure Meter Exact to the Inch • All Cuts are Square
Mesh Mate 3
• Cuts Both Vertically and Horizontally
• Comes with 2 Cutting Arms
• Can Accommodate Multiple Cutting Arms
e3
Mesh Mat
™
Item #
KITMMJR3
KITMM3
MMTC
MMB
MMTCA
Description
Mesh Mate Jr 3™ Only
Mesh Mate 3™ w / Top Cutter Assembly
Mesh Mate 3™ Top Cutter Arm Only
Mesh Mate 3™ 5-Blade Pack
Mesh Mate 3™ Top Cutter Assembly
LEVERAGE PRY TOOLS
Medium Duty
Leverage Pry Lifter Tool
Medium Duty
• Lifts Lids Easily with Leverage
• Coated Metal with Plastic Coated Handle
• 11” Long
Item #
Remove Lid
Without
Damage
LLB
Leverage Pry Bar Tool
Heavy Duty
50
Convenient Size
Item #
Description
16” Long
Price
19.95
Light Duty Plastic Lid Lifter
8 1/2” Long
• Cuts, Seals, Lifts
• 16” Long
LLH
Description
11” Long
Price
16.50
Item #
Description
LL
81/2” Long
Price
3.50
Price
520.00
649.00
50.00
5.00
160.00
TOOL KITS
NEW PRODUCT
Save
$ 12
25
KITHS
KITPVNT
Decorative Tool Kit
•18 pc Tool Kit for Venetian Plaster, Marmoino,
lime and Other Decorative Finishes • Aluminum Case with Two Dividers
• Special Steel Welded Tools with Wooden or
Sintesi Rubber Handles and Two B-Wires
Includes: 3 Finishing Trowels, 2 Plastering Trowels,
4 Venetian Plaster Spatula Set, 2 Putty Knives,
1 Filling Scraper, 1 Tempered Steel Scraper,
2 Ultra-Flexible Scrapers, 2 Filling Trowels
Item #
Description
KITPVNT Decorative Tool Kit
Head Start Pro Kit Includes Economy Canvas Bag, HD Lid Lifter; 13” Aluminum Hawk, Bucket
Trowel, 5” x 13” Marshalltown Trowel, 11/2” x 5”, 2” x 5” and 2” x 6”
Margin Trowels, 1” & 2” Inside Corner Edgers, 1” & 2” Outside Corner
Edgers, Quality Pro Float, Off-Base Spray, Aluminum Standard Rasp,
Foam-Lok Adhesive, 6” Cleaning Brush, 2” Long Mask Red Tape, HD
Knife and 10-Pack of Blades.
Item # Description
Price
KITHS
Head Start Pro Kit 239.58
Save
CUSTOMIZED KITS AVAILABLE
2325
$
KITICF2
We
Can Custom
Assemble a Kit
For you
HD Canvas Bag
ICF Kit Includes Commercial Duty Hot Knife™, 450 Blade, 4” Hot Knife
Adapter, 2’ NWFW Flat Wire, Cable Slot Cutter (3-Pak),
Single Electrical Box Cutter (3-Pak), Double Slot
Cutter (3-Pak), HD Canvas Bag, 3/4” Cutting Knife.
Item # Description Price
442.00
KITICF2 IFC Kit
Hinged Metal Frame
Top, Leather Straps &
Handle.
24” Wide x 12” Deep.
Item #
CB24
Description
HD Quality Canvas Bag
12”
Deep
Price
50.00
CB24
www.demandproducts.com • 1-800.325.7540
51
SIDEWINDER
SideWinder™
Ornamental 4’ Shape Cutter
• Cuts Compound Miters, Angle Straight Cuts, Columns,
and Decorative Moldings
• Uses Your Hardboard Template Patterns to Trace
Shapes
• Variable Heat Control — Heats Up Extremely Fast
• 110 Volts. Also Available in 220 Volts
• 2’ x 4’ Block Table Capacity
• 33” X 62” Wide Table Size
• Weighs Just 125 Pounds
• Cuts 48” Wide EPS
TOOL
• Lease To Buy Available
KITSWM
CI
Item #
KITSW
MAGNUM
KITSWM
NW100
NW500
Description
SideWinder™ Only
Magnum Power Controller
SideWinder™ w/ Magnum
Ni-Chrome Wire, 100 feet
Ni-Chrome Wire, 500 feet
Price
2,052.00
563.00
2,525.00
55.00
220.00
Pattern Template Guide
How-To Pattern Guide with
Easy-To-Follow Illustrations
Includes 63 Profiles
PTG
Standard Version
Digital Version
Booklet Only
Booklet & CD
PTGD
SideWinder 8™
Ornamental 8’ Shape Cutter
• Motorized Pattern Follower
• Industrial Quality
• Single Wire Cutter
• Cuts Compound Miters, Angle Straight Cuts, Columns,
and Decorative Moldings
• Uses Your Hardboard Template Patterns to Trace Shapes
• Variable Heat Control — Heats Up Extremely Fast
• 110 Volts. Also Available in 220 Volts
• 2’ x 8’ Block Table Capacity
• 48” X 96” Wide Table Size
• Weighs Just 350 Pounds
• Folding Legs
• Price Includes Controller and Motorized Follower
• Lease To Buy Available
SW8
Motorized Pattern Follower
52
Item #
SW8
MAG8
IW100
IW500
Description
Price
SideWinder 8 w/ Controller 5,619.00
835.00
Mag 8 Power Controller
85.00
Inconnel Wire, 100 feet
340.00
Inconnel Wire, 500 feet
™
STYROSMITH
StyroSmith™
2-in-1 Hot Wire Foam Cutter
and Ornamental Shaper
SideWinder™ & StyroCut™
KITSSM
• Ornamental Shapes
• Vertical & Horizontal Straight Cuts
• Channels, Angles, Tapers, Compound Miters,
Straight Cuts, Columns, Decorative Moldings, etc.
• 110 Volt
• 24” Block Table Capacity
• Auxillary Table
• Weight 225 Pounds
• Lease To Buy Available
Item #
KITSS
MAGNUM
KITSSM
NW100
NW500
Description
StyroSmith™ Only
Magnum Power Controller
StyroSmith™ w/ Magnum
Ni-Chrome Wire, 100 feet
Ni-Chrome Wire, 500 feet
Price
4,342.00
563.00
4,800.00
55.00
220.00
StyroCut™
Our Best Machine!
• Use In-Plant or On Job Sites
• Foot Pedal Control
• Designed by Engineers to Cut Straight,
Channel, Angles and Tapers
• Portable — Weighs Only 117 Pounds
• Capable of Vertical and Horizontal Cuts
• Table Tilts and Locks 0°- 45°
• Cuts 15” Deep by 4’ Wide
• 60” Wide Cutting Table by 27” Deep
Item #
Description
KITSC
MAGNUM
KITSCM
NW100
NW500
StyroCut™ Only
Magnum Power Controller
StyroCut™ w/ Magnum
Ni-Chrome Wire, 100 feet
Ni-Chrome Wire, 500 feet
KITSCM
www.demandproducts.com • 1-800.325.7540
53
QUICKSILVER
Quick Silver 12/48™
& Quick Silver 12/96™
Our Most Versatile Portable Machine
• Portable — Weighs Only 60 Pounds
• Sets Up and Folds Down in Seconds
• Cuts 12” at 90° and Harp Swings 180° for Angle Cuts
• Cuts Tapers and Cones
• Water Resistant Polypropylene Top
• 110 Volts. Also Available in 220 Volts
• Built-in 24” Table Extension
• Cutting Width 48” or 96”
Harp
Swings
180° for
Special
Cuts
KITQSM
Compact!
Item #
Description
QS1248
MAGNUM
KITQSM
NW100
NW500
QS8
IW100
IW500
Quick Silver™ 12/48
Magnum Power Controller
QS1248 w/ Magnum
Ni-Chrome Wire, 100 feet
Ni-Chrome Wire, 500 feet
Quick Silver™ 8’ w/ Controller
Inconel Wire, 100 feet
Inconel Wire, 500 feet
Price
Light Gauge Wire Only
IW100
NW100
NW500
Heats NW100 Wire
24” to 53”
Hot Enough to Cut EPS foam.
IW500
Heats NW100 Wire
24” to 108”
Hot Enough to Cut EPS foam.
Verti-Cutt™
Hot Wire Foam Cutter
• Portable — Weighs Only 60 Pounds
• Sets Up and Folds Down in Seconds
• For Vertical and Diagonal Cuts
• Cuts Corners and Cylinders
• Moisture Resistant Bakelite Table Top
• Built In Transformer Mounts Under Table
• Continuously Adjustable Temperature
• Heats Wire in 10-15 Seconds
VC20
Item #
Description
VC20
NW100
NW500
Verti-Cutt™ Only
Ni-Chrome Wire, 100 feet
Ni-Chrome Wire, 500 feet
Foot Pedal
54
2,114.00
563.00
2,550.00
55.00
220.00
4,858.00
85.00
340.00
Built In Transformer
Diagonal Cuts
Bevel Cuts
BLOCK BUDDY
Remove Top
Brace
Add Harp at Top Uprights
Facing the Back of the
StyroCut 15
Add Auxiliary
Table
StyroCut 15
StyroSmith
Block Buddy™
Cornice Cutter
CI
18”
TOOL
• Shaves, Cuts and Miters
• Miters from 0 to 45º
• Cuts 18” Deep Block
• Weighs Only 35 Pounds
• Legs Fold for Easy Storage
• 24” Depth Cuts at 90º
• 16” Depth cuts at 45º
• Great for ICF
Item #
Description
BB
MAGNUM
KITBBM
NW100
NW500
Block Buddy™ Only
Magnum Power Controller
Block Buddy™ w/ Magnum
Ni-Chrome Wire, 100 feet
Ni-Chrome Wire, 500 feet
24” Depth Cut at 90°
16” Depth Cut at 45°
Price
1.142.00
563.00
1,600.00
55.00
220.00
KITBBM
JobCut™
Designed for Jobsite Performance
• Portable - Weighs Only 45 Pounds
• Sets Up and Folds Down in Seconds
• Cuts 12” at 90°
• Harp Tilts - Not the Table!
• Cuts from 1° to 90°
• Requires Two 2’ x 8’s
• 110 Volts. Also Available in 220 Volts
• Cutting Width 48”
• Folds Quickly to only 5” for Easy Storage
Item #
JOBCUT
MAGNUM
KITJCM
NW100
NW500
Description
JobCut™ Only
Magnum Power Controller
JobCut™ w/ Magnum
Ni-Chrome Wire, 100 feet
Ni-Chrome Wire, 500 feet
KITJCM
Price
1,375.00
563.00
1,895.00
55.00
220.00
Does Not Include Saw Horses or Wood
Folds Quickly to only 5”
Harp Moves–Not the Table
www.demandproducts.com • 1-800.325.7540
55
TW848I
Top Selling MegaPlot Model
C848 CNC Foam Cutter
Single Wire 8’ with TurnTable
• Cuts Up to 8’ Wide by 4’ High
• Industrial Quality
• Heavy Duty Extruded Aluminum Construction
• Independent Heavy Duty Stepper Motors
• Ball Bearing Drive Track Systems
• Built-in TurnTable
• Accepts Vector Art .plt or CAD .dxf Files
• Operates on 110 Volts
TW848 Independent Axis
CNC Foam Cutter
Single Wire 8’ with Lathe & TurnTable
• Will Cut Tapered Fluted Columns
• Cuts Up to 8’ Wide by 4’ High
• Comes Complete with Lathe and TurnTable
• Industrial Quality
• Heavy Duty Extruded Aluminum Construction
• Automatic Wire Tensioner
• 6 Independent Heavy Duty Stepper Motors
• Ball Bearing Drive Track Systems
• Accepts Vector Art .plt or CAD .dxf Files
• Operates on 110 Volts
TKTW848I Call For Turnkey Pricing*
Turnkey Pricing Includes
• Machine
• TurnTable
• FoamShaper™ Software
• Controller-Remote
Control
• CorelDraw® Software
56
• 19” LCD Flat Screen Monitor
• Windows® Software
• Shipping in Continental U.S.
• Installation & Training
• PC Computer
• Options Avaliable
TKC848 Call For Turnkey Pricing•
Demo CD
Available
Featuring
MP Remote
Functions
warranty
Ask About
Our Monthly
Specials
Columns • Pipe Insulation • Sign Letters • Graphics
Store Props & Displays • Logos • Amusement Park Props
Architectural Scale Models • Easy Coat Coatings
MW848 CNC Foam Cutter
10-Wire 8’ with TurnTable
Easy Coat Silver
• Can Cut Using 1-10 Wires
• Cuts Up to 8’ Wide by 4’ High
• Comes Complete with Lathe and TurnTable
• Industrial Quality
• Heavy Duty Extruded Aluminum Construction
• Independent Heavy Duty Stepper Motors
• Ball Bearing Drive Track Systems
• Accepts Vector Art .plt or CAD .dxf Files
• Operates on 220 Volts, Single Phase
Automatic Foam Coater With
or Without Fiber Mesh
• Footprint: 57” x 62” of Floor Space
• HD Stainless Steel and Aluminum Construction
• Profiles from 2” to 36” Wide and 18” High
• Sprocket Feed Depth Controls
• 110 or 220 Volts
• One Year Warranty
ECOATER Automatic Feed System
Call For Turnkey Pricing*
Stand Not Included
TKMW848 Call For Turnkey Pricing*
Arch/Base Cutter Combo
Easy Coat Coating
Stand Alone Precision Arch Cutting
• Cuts Compound Curves and
Negative for Precast Concrete
• Minimum Arch Internal Radius
of 5” & External Radius of 10”
Maximum Cutting Sizes
Base/Caps
Arches
30”
Especially Designed
For Shape Coating
50-60sq. ft. @ 1/4”
Description
EC50G
Easy-Coat, 50 lb Bag
Full Truck Load: 16 Pallets (896 Bags)
1/2 Truck Load: 8 Pallets (448 Bags)
1/4 Truck Load: 4 Pallets (224 Bags)
2 Pallets (112 Bags)
10”
20”
43”
CC70
Item #
CC70
Description
Combo Cutter
www.demandproducts.com • 1-800.325.7540
57
TM
FD35 Foam Densifier
FB285 & FB585 Foam Densifier Grinder, Storage Hopper & Densifier in one!
1200 lbs* Loose Foam per Hr.
TURN YOUR WASTE
INTO A PROFITABLE
REVENUE STREAM
FD12
Foam Densifier
FD15 & FD25
Foam Densifier
* Figures are approximate depending on foam type, density and rate of feed
Waste is Reduced by Grinding and Then Melting Foam Into a Recyclable Patty That is Reduced Up To 90% In Volume
• Greatly Reduces Foam Volume for Recycling
• Densifies Three Types of Foam —
Polystyrene, Polyethylene and Polypropylene
• Produces Revenue by Creating a Marketable Product
for Recycling
58
• Up To 90% Reduction of Foam Waste Size
• Heavy Duty Motors with Solid Steel Construction
• Densifiers Have Passed Rigourous Air Quality and
Health Environment Safety Tests
• One Year Warranty with a Loaner Program Available if
Your Machine is Out of Service
ReCyk™
EPS Foam Grinder
• Gravity Fed into 18” x 18”
Hot Wire Grid
• 3/4” Grid Openings Cut Foam
• Manually Move Foam Sideways
While Feeding Foam Into ReCyk™
or Recycle Twice to Get 3/4” Cubes
• Machine Measures: 25” x 25” x 5’
• Weighs 125 Pounds
• Portable: Moves Around Easily
• Standard 110 Volt
• Manual Feed Opening of
18.3” x 13.2”
• Volume Reduction Ratio: Up To 3:1
• Gravity Feed Into a Plastic Bag
• Low Power Consumption
• Low Noise and Low Dust
• Small Size and High Efficiency
• Safe and Easy to Operate
EPS Hot Wire Waste Cuber
EPS Waste Grinder
Item #
Description
FG180
Foam Grinder 180
Price
4,725.00
Hot Wire - 3/4” Cubes
Item #
RFS
RFSB
Description
Recyk™ Foam Saver
Recyk™ Bags 36” x 58”, 100 count*
FG180
GROUND EPS Foam
2,142.00
80.00
* Bags May Not Be Clear
CI
TOOL
Foam Shredder
FD2000
Foam Waste Shreader
• Shreds Into Flakes 3/4” to 2”
• Shreds EPS, EPP and XPS
• Foam Flakes Can Be Recycled
• Inlet Sizes from 19” to 47”,
Depending on Model
• Flakes Take Up Much Less Storage
Space Than Unprocessed Containers
• Perfect for EPS Molding Factories,
Food Thermoforming Factories
EPS Recycling Centers, Fragile
Product Packaging Shops and
Parcel Packaging Centers
• 220 voltage
Item #
Description
FG250
FG370
FG430
FG1200
FG1500
Foam Grinder 250
Foam Grinder 370
Foam Grinder 430
Foam Grinder 1200
Foam Grinder 1500
FD2000 Series Compactor
Grinder & Compactor in One
• Compacts Expanded Polystyrene
• Processes up to 200 pounds Per Hour of Loose Foam
Depending on Type of EPS and Model
• Produces Revenue By Creating a Marketable Product for Recycling
• Recycle to Help Save Our Environment
• 220 Volt
• One Year Warranty
Item #
Description
FD2000
FD3000
Foam Compactor
Foam Compactor
FG250
www.demandproducts.com • 1-800.325.7540
59
S E R I E S
CUTLAS HK5-Dual Oscillating Blade
Dual Oscillating Blade CNC is a versatile dual blade machine allowing
intricate contouring, block sheeting and many other cuts. The HK5 has
a small footprint; advantages are quick blade changes and high speed
oscillation with a high quality electronic cabinet. Block size for this
machine is 114” x 90” x 51”
CNC Type
POWER
MACHINE WEIGHT
Monitor
Control
OPERATION SYSTEM
PROGRAMMABLE AXIS
HK5
Industrial control
13.4 HP, 220V, 60HZ
~6,200 LBS
LCD
MOTION CONTROL CARD
WINDOWS
MULTI AXIS
CONVOLUTER
The Cutlas™ Convoluter is a rugged unit designed to split
flexible products where thin sheets from slab material are
required. Our Cutlas™ Convoluter is available in three sizes,
65”, 84” and 92” wide (which is ideal for producing King
Size and Cal King size mattresses). Cutlas™ Convoluters,
carousels, bandsaws, blade and wire machines will
complement your existing production line of equipment.
3 SIZES
DPYX-65
DPYX-84
DPYX-92
60
65” WIDE x 12” HIGH
84” WIDE X 12” HIGH
92” WIDE X 12” HIGH
CAROUSEL - SLITTTER - DC73
Demand’s Horizontal Carousel Slitter Foam Saw is a high production machine allowing for
high-speed continuous operation with minimal manual handling. It is the ideal machine for the
production of mattress toppers.
Applications: furniture, bedding, automobile, aerospace, packaging & medical industries
Diameter
Foam size
Maximum foam size
~23 Ft 11 inch
4 ft 11 in (W) × 6 ft 6.5 in (L) ×3 ft 11 in (H) (5 pieces)
7 FT 6.5 IN (W) 9 FT 10 IN (L)× 3 FT 11 in (H) (3 pieces)
BANDSAW-Model DPVBS-1500
Our Vertical Blade Bandsaw is powered by a 21 HP Industrial motor and
incorporates a built in blade sharpener that keeps the blade razor sharp
throughout your project. The large table glides effortlessly along precision
rails assuring a smooth clean consistent cut in seconds.
Floor space
Minimum cutting thickness
Maximum cutting height
multipLE sizes
.20 inches
varies
OTHER SIZES AVALIABLE
HS SERIES HORIZONTAL FOAM SLITTER SAW
The Horizontal Slitter is an auto-indexing machine suitable
for slicing/sheet cutting various types of flexible foam. It is
an excellent solution for furniture, automotive, packaging,
athletics and various other industries.
MODEL
Cutting size
Cutting height
Cutting thickness
HS-65
W 65”×L 79”
H 47”
.1”~8”
HS-84
W 84”×L 11
H 47”
.1”~8”
61
SOFT SAWS
Soft Polyurethane Saw Pneumatic Handheld Saw
Ultra-Sharp Serrated
Single-Edge Blade
23”
• Designed for Soft Urethane
1/2 Pound Insulation!
• Ultra Sharp Blade Cuts Quickly
• Free Speed of 3,000 RPMs
• Requires 8 CFM @ 93 PSI
• Weighs Just 7 Pounds
• Blade Length Past Tool - 23”
• Powered by IngersollRand®
Straight Line Sander
• 11/4” Blade Travel
PUSAW36
Ultra-Sharp Serrated
Double-Edge Blade
Item #
Description
PUSAW36
PUBLADE36
PUBLADE36DE
Polyurethane Saw - Includes Blade
Replacement Blade
Double-Edge Replacement Blade
Price
285.00
45.00
75.00
Air Hose and Connections Not Included
Soft Spray-Foam Saw
Electric Handheld Saw
• Designed for Soft Urethane
1/2 Pound Insulation!
• Ultra Sharp Blade Cuts Quickly
• Free Speed of 3,000 RPMs
• Weighs Just 10 Pounds
• Blade Length Past Tool - 29”
• 11/4” Blade Travel
Ultra-Sharp
Serrated Blade
like the
Pneumatic
Saw Above
PUSAWE
Item #
Description
PUSAWE
PUBLADE29
Polyurethane Saw - Includes Blade
Replacement Blade
Price
545.00
45.00
29” Blade
11” Blade
PUSAW11
Polyurethane Saws
11” & 29” Hand Saws
For 1/2 Pound Soft Foam
PUSAW29
62
CrocTM Cut Resistant Gloves
Item #
Description
Price
PUSAW11
PUSAW29
Polyurethane Hand Saw
Polyurethane Hand Saw
45.00
55.00
12 per box
Item #
Description
GLOVE-CR-12
CrocTM Gloves
POLY PLANERS
Solid, Tool Hardened Steel
Blade Provides Excellent
Wear Characteristics
Beveled Blade Edge to
Provide Positive Cutting
While Reducing Blade Drag
Powerful and
Rugged .85 HP
Air Motor Uses
Maximum 33.0 CFM
@ 90 PSI
All Aluminum
Construction
Guard Helps Keep
Foam Chips Away
From Operator
2 Safety
Blocks to
Prevent
Accidental
Start-Up
Unless Both
Start Buttons
Are Depressed
Simultaneously,
the Poly-Plane™
Will Not Start
• Virtually Unbreakable Steel Blade • Designed to Cut Hard 2 Pound Foam
• Available in 16” and 24” Models
• Rugged Air Motor and Dual Safety
• Requires 23 CFM @ 87-90 PSI
Switches
• 16” Model Weighs Just 12.5 lbs
• 24 Model Weighs 14.5 lbs
2
Hard Polyurethane Planer
Pneumatic Handheld Saw
Item #
Description
PUP16
PUP24
16’ Poly-Plane
24’ Poly-Plane
Price
2,160.50
2,281.25
Models -1/2 thru 10+ Pound Foam
For Open Cell or Closed Cell
• Specialized Cutters for 1/2 lb -10+ lb Foam
• Heavy-Duty Commercial Quality
• 16” Model Weighs Just 13.2 Pounds
• 24” Model Weighs 17.5 Pounds
• Replacement Brushes and Blades Available
• Rugged Air Motor and Electric Motor
• Fafnir Ball Bearings on Cutter Shafts
• Air Motors Require 23 CFM @ 125 PSI
PUPGPM
Spray Foam Grinder
Pneumatic Grinding Plate
The pneumatic motor operates most
efficiently when air pressure is
maintained at 125psi. An air compressor
able to deliver 23.0cfm is necessary.
Incoming air should be dry, clean, and
filtered. We recommend using a ¾” line
from the compressor, the last 20’ use a
½” airline. Lubricate the tool at least
once every 8 hours by pouring a small
quantity of air motor oil through the
air inlet.
Item #
Description
PUPGPM
Grinding Plate
Air Motor —
Soft Wire* for 1/2 Lb or
Hard Wire* for 2 Lb +.
Item #
Description
PUP216A*
PUP224A*
16” Poly-Plane 2™ Air
24” Poly-Plane 2™ Air
Air Motor —
Carbide Blades for
Up to 10+ Lb. Foam.
Item #
Description
PUP216AC
PUP224AC
16” Poly-Plane 2™ Air Carbide
24” Poly-Plane 2™ Air Carbide
*Specify Soft or Hard Wire
www.demandproducts.com • 1-800.325.7540
63
POLY-SPRAY
Poly-Spray 1™ System
Polyurea Spray Hardcoat
Photo Credit: Hardcoat LTD. Cory Porterfield
• Environmentally Safe
• Contains No VOC’s
• Coating is Paintable
• Color is Neutral
• Dries in 7 Minutes at 70°
• May Be Painted After 7 Minutes
• Six 750 ml Cartridges Will Cover 127 Sq Ft. at 30 mils
• 100% Solids, Two-component Aromatic Polyurethane
• Smooth Finish
Compressor Requirements:
Standard 5 hp compressor, with a 20 gallon tank capable
of 10 to 12 CFM. For optimum performance, the supply
pressure must be greater than 100 P.S.I. and less than
145 P.S.I. Protective clothing, eyewear and breathing
devices should be worn.
Item #
PS75
KITPS75
PSG
PSMT
Description
Cartridge, Each
Cartridge, Case of 6
(Quantity Break at 4,8,12 & 36 Cases)
Spray Gun
Static Mixer w/ Atomizing Tip
Static Mixer w/ Air Atomizing Tip Comes w/ Each Cartridge
PSMT
Photo Credit: Hardcoat LTD. Cory Porterfield
64
PS75
COATINGS
2-Part Hand-Applied Hard Shell Coatings
UreShell™
Liquid Rock™
UreShell is a marvelous hard coat
2-part urethane-based coating. 20-25
minute working time allows for rolling
or brushing. Applications cover both
interior and exterior surfaces. It leaves
a hard glossy smooth shell finish. It
works great on props, backdrops,
signs, molds, etc. 1 gallon covers
approximately 320 sq. feet at 5 mil
thickness. Dries to a tan color and can
be finish coated with most paints and
sythentic stucco.
Liquid Rock is a 2-part epoxybased coating that can be applied
on interior and exterior surfaces.
It has extraordinary flow characteristics. It leaves a hard glossy
smooth shell finish. It works well
on props and backdrops when a
hard finish is preferred. It can be
brushed or rolled. Average working time is 20-25 minutes. 1 gallon
covers approximately 320 sq. feet
at 5 mil thickness. Dries off-white
and can be painted.
Item #
US1
KITUS1
Item #
LR1
KITLR1
2-Part Urethane
Description
UreShell, 1 Gallon
UreShell, 4 Gallon Kit
2-Part Epoxy
Price
85.00
320.00
Price
THEATER
69.00
262.00
MAGIC
Description
Liquid Rock, 1 Gallon
Liquid Rock, 4 Gallon Kit
Specialty Coatings Cement Texture
Elasta-Shield™
Theater Magic™
Dries clear. Water soluble flexible shield
protects EPS foam for general handling.
Will act as an adhesive for applying
fabrics if they are applied while ElastaShield is wet. Can be brushed, rolled or
sprayed. Covers 320 sq. ft. at 5 mils.
Add Water and Mix. Cementitious
coating. Combination of Portland
Cement, Polymers & Sand. For
either interior or exterior surfaces.
Developed for EPS foam. Dries Gray.
Use trowel, or spray. Covers 90-100
sq. ft. at 1/8” to 3/16”.
Item #
ESC
KITESC
Item #
TM50
Smooth Vinyl-Acrylic
Protective Skin
Price
Description
Elasta-Shield 1-gallon 39.00
Elasta-Shield 4-gallon 148.00
Cementitious
Stucco Finish
Description
Theater Magic
Price
32.00
Stonewall™
Rule of Thumb
1 mil thickness of liquid will theoretically
cover 1604 square feet. (If you need 5
mils thick — 5 divided into 1604 would be
320 sq. ft.)
To calculate the square footage of coatings per gallon
Stucco-Like
Acrylic Finish
Water-based, elastomeric coating.
Allows definition to show. For
either interior or exterior surfaces.
Works well over EPS foam and
other surfaces. Dries white. Can be
brushed, rolled or sprayed. Covers
320 sq. ft. at 5 mils.
Item #
SWC
SWC5
Description
Stonewall Foam 1 Gallon
Stonewall Foam 5 Gallon
Price
38.00
160.00
www.demandproducts.com • 1-800.325.7540
65
CRAFTERS
Foam CraftCutter™
Crafters Precision Hot Knife
Rod Style Knife
• Continuous Duty Cycle
• 1/8” Diameter Stainless Steel Tube
• Versatile Sled Guide Accessory
CRAFTHD
Item #
HKTPR6
HKTPR9
HKTPR69
HD
Description
6” Knife with Sled
9” Knife with Sled
6” & 9” Knives with Sled
Heat-Dial Craft-Cutter™
Variable Heat Craft-Cutter™
Item #
CRAFTHD
Description
HD Craft Cutter
HKTPR6
Price
79.95
HKTPR9
HAND-HELD TOOLS
5”
Opening
13/4”
Opening
Hand Wire™
Hand-Held Hot Wire Foam Cutter
HCB
HCE
Item #
HCE
HCB
Description
110 Volt Hand Cutter
Battery Hand Cutter
Price
39.95
119.95
HCE-110 Volt Operation
HCB-Uses Two “C” Batteries
Tippi Craft Hot Knife Foam Cutter
Ideal For Adding Intricate Detail & Depth To Projects
• Lightweight and Agile
• Uses Standard 110 Volt - Power
Transformer Included
• LED Indicates Operation
Item #
TIPPI
TIPPI
66
Description
Tippi Hot Knife
THERMOCUT 115 Hot Wire Cutter
For Architectural Models, Protoypes,
Model Railroads, Planes & Boat Items
• 15 11/32” x 11” Cutting Table
• Grid and Protractor Assists Division & Cutting
• Overarm Has 13 ¾” Throat and 5 ½” Height
• 98ft Spool of Wire Included
• Wire Heats to Maximum in Less Than 1 Sec.
• LED Indicates Operation and Hot Wire
• Allows Miter Cutting
CRAFTERS
Precision Model-Maker™
24.5” x 10.4” Table
• Built-In Power Supply
• Variable Heat Settings
• 15” Wire Height
• 3.3” - 8.2” Wire Height
• Weighs 17.6 Pounds
• Comes Complete With Angle Guide
• Pipe Support
• Protractor & Roll of Wire
• Horizontal Straight Guide
• 2 Rollers
• Foot Switch
Item #
HCM3S
Description
Precision Model Maker
Price
895.00
Hobby Table 12” x 22” Table
Mighty Might ™
10” x 15” Table
• Built-In Power Supply with 3 Heat Settings
• 8” Wire Height
•12” x 22” Cutting Table
• Built-In Power Supply
• Variable Heat Settings
• 63/4” Wire Height
Item #
HCM2S
Item #
HCM2SP
Description
Hobby Table
Price
295.00
Description
Mighty Might
12” Free Form
Craft Cutter
12” x 12” Table
• Built-In Variable Power Supply
•The “Hot Wire Jig Saw”
• Made in the USA
Item #
CTC12
Item #
PT-CUT115
Description
Free Foam Cutter
Description
Thermocut 115
www.demandproducts.com • 1-800.325.7540
67
1055 Nine North Drive • Alpharetta, GA 30004 USA
DEMAND PRODUCTS. CREATING SOLUTIONS FOR THE FOAM INDUSTRY
HOT KNIFE ™ CR CutRite ™
Page 12
DURARASP™
Page 26
PBH™ WASHERS
Page 06
www.demandproducts.com • 1-800-325-7540 USA & Canada