New Method Steel Stamps, Inc.
is the world leader in
manufacturing Automatic Roll
Marking Attachments for OD and
End Face marking
The Best Way to Mark
• All New Method automatic roll marking attachments, whether
designed for use in OD or END-FACE marking, eliminate
secondary marking operations, for they are engineered to
work as an integral part of the machine - advancing, marking
the part and clearing it during the machine cycle. Avoid extra
tooling and setup time as well as production time.
• Secondary marking operations of parts are costly.
• The most economical and efficient way to identify products is
to do it prior to, or during the manufacturing cycle
automatically, making it a primary operation.
Automatic Attachments
PART BREAKDOWN AVAILABLE UPON REQUEST
CNC Turning Centers
Available in Outside Die Mount or
Throated Die Mount
End Face Marking Tools
Automatic Attachments
PART BREAKDOWN AVAILABLE UPON REQUEST
National Acme Tooling
604-1
620
705
New Britain Tooling
602-1
Automatic Attachments
PART BREAKDOWN AVAILABLE UPON REQUEST
Greenlee Tooling
Tooling for Swiss
Machines (including
Citizen, Nakamora, Schutte,
Star and Tornos) are
available.
New Method also makes
Custom Tooling upon
request.
541 Interchangeable Type Retainer
Used on all Roll Marking Attachments
that use the following Power Paks: 550,
560, 570, 580, 583, 588
541 Retainer accepts the following type
sizes: 1/16", 3/64", 3/32", 1/8", 5/32",
5/64", 3/16"
For characters to be top-to-collet use
1035 as starting cam. For bottom-to-collet
use 1034 as starting cam.
Note: The starting cam must use the
dowel pins supplied. Failure to do so will
result in damage to the type.
544 Interchangeable Type
Retainer
Used on all Roll Marking Attachments
that use the following Power Paks:
571, 578, 584, 585.
The 544 Interchangeable Type
Retainer accepts the following type
sizes: 3/64", 1/16", 5/64", 3/32", 1/8".
Roll Die Order Worksheet
Roll Marking Die Samples
Bar Marking Machines
Bar stock marking means
marking the full bar
length of hex, round or
square stock before
machining parts from the
bar in a Screw Machine
or Turning Center. Typical
parts include fittings,
spud orifices, and flow
controllers. Bars can be
marked on 1,2,3,4,5, or 6
sides either while being
straightened or from coil
or after cutting to bar
lengths.
6000 Bar Marking Machine
• Manual load, with auto feed at 2-feet per second
• Handles Hex & Square stock from ½ to 2 in.
• Interchangeable Bar Marking Dies made to your
specification
• Adjustable marking depths
• Eliminates wasted floor space
New Method
Bar Marking Model 6400
Secondary Marking Machines
Custom Marking Machines
Pneumatic & Manual Marking
Presses
Manual Marking Options
Contact Information
Charles D. L. Brown
President
Email – [email protected]
Quotes, sales, customer service, technical issues
Kellee M. Warren
Office Manager
Email – [email protected]
Quotes, sales, billing inquires
Office Phone +1 (586) 293-0200
Toll Free +1 (800)-582-0199
Office Fax +1 (586) 296-1900
Website – www.newmethod.com
Mailing Address:
P.O. Box 338
Fraser, MI 48026
Physical Address:
31313 Kendall
Fraser, MI 48026
Located approximately 10 miles
north of Detroit, Michigan