MATERIAL LIFTERS / MATERIAL FEED LIFTER UNITS ■Material lifters SHEET LIFTERS 18 120 0.5 27 SRL 45 2 R5 ③LB12-50 2 pcs. H ④~ SS400 ⑤~ SS400 SLCE ③Hexagon socket set screw ① ② MSB10−40 P1 7 40 52 60 ③ 22 30 S=20 SWR21-65 2 pcs. ⑧PTFE resin with filler F (L) 60 80 75 95 12 22 90 120 N{kgf} min. 165{16.8} 108{11.0} Catalog No. Type N{kgf} max. 439{44.8} 469{47.8} SRL ● Catalog No. Price 10~19 5% 20~29 10% 30~50 15% For larger orders, ask about prices/delivery. Steel roller type 15 30 ③G-type ring ②Hinge pin 60±2 ④Roller F 973 t N/mm{kgf/mm} Type Catalog No. 5.88{0.60} 8.43{0.86} Steel roller type ZORWMS ZORWHS Dispatch Price 20 9 Stroke Fmax 16mm (Guarantee range for repeated use) t Base unit price 1~19 pieces 1,462 Dispatch Price R10 12.5 27.5 40 80 20S 70 Type Catalog No. 5.88{0.60} 8.43{0.86} Resin roller type ZORWMP ZORWHP ● Base unit price 1~19 pieces 1,462 Load {kgf}=Load {N}×0.101972 8 25S 7 60 6 50 5 40 20R 30 20U 20 Example 4 25R Alteration Quantity 1~19 Discount rate Base unit price 20~49 5% 50~99 10% 100~200 For larger orders, ask about prices/delivery. 15% Press 2010 Days ■Volume discount price P.37 Quantity 1~9 Discount rate Base unit price 10~19 5% 20~29 10% 30~50 15% Catalog No. -(HTC・HTM) SLCES20U - HTM Code Days Spec. Sheet bar body Plated 1 Rs./Code HTM (Electroless nickel plating) 30 annot be used C for SLCE・SLC. Load diagram ■Volume discount price P.37 9 Induction hardening of the upper surface bar body only HTC (Sheet 55HRC~ annot be used C for SLCE・SLC. Days 10 20 Stroke S[mm] SLCE 20S 714 2 10 0 Catalog No. 9 3 25U ②Block ~ FC250 For larger orders, ask about prices/delivery. Load {kgf}=Load {N}×0.101972 Alterations N/mm{kgf/mm} Price Order approximately 1 mm shorter than the full stroke. t ZORWMS Avoid using at the full stroke. It is recommended the stroke be set 9 1.4 1.6 Catalog No. 7 ①Leaf spring 8 20 Catalog No. Base unit price 1~9 pieces Coil spring(color) Stroke S ③ Type No. SLCES SLCE SLC SWU17-50(Light blue) 20U SWR17-50(Ivory) 20R 20 SLCES SWS17-50(Orange) 20S SLCE 6,300 8,232 12,600 25U SWU17-50(Light blue) SLC 25 SWR17-50(Ivory) 25R SWS17-50(Orange) 25S Blade 50±1.0 S45C Spring load P1 N{kgf} min. max. 73{ 7.5} 98{10.0} 117{12.0} 157{16.0} 220{22.5} 294{30.0} 67{ 6.9} 98{10.0} 108{11.0} 157{16.0} 202{20.6} 294{30.0} Load P[kgf] 65 POM Lifting load P N{kgf} min. max. 18.3{1.9} 24.5{2.5} 29.3{3.0} 39.2{4.0} 54.9{5.6} 73.5{7.5} 16.9{1.7} 24.5{2.5} 27.0{2.8} 39.2{4.0} 51.0{5.2} 73.5{7.5} Load P[N] ZORWMP ZORWHP 1.4 1.6 90 ①Sheet bar ~ SLCES S45C SLCE・SLC Copper alloy 40±0.5 20 47±0.5 28 26 Resin roller type ① ~ SK5M ② ~ S45C ③ IWATA RING G-8 ④ Steel roller type ~ S45C 45HRC~ Resin roller type utside: Polyacetal resin(POM) ~ O Inside: S45C CB8-20 2 pcs. ③ 210 ZORWMS ZORWHS Details of roller 12 2 R30 20 25 15 Days ■Material feed lifter units Resin roller type ° 7 30 R30 45 Quantity 1~9 Discount rate Base unit price P1 SLC 55 SRL 20 Dispatch ■Volume discount price P.37 Load {kgf}=Load {N}×0.101972 P SLC 22 Order Base unit price 1~9 pieces 10,752 12,230 S 10 20 10 H 90 195 S D ⑦Coil spring 7 40 52 60 ⑥Hexagon socket set screw 2 R30 20 30 R30 ⑤Spacer 10 ⑦S=10 SWF20-45 2 pcs. Order CBW10 ④Retainer block ⑥CB6-15 4 pcs. S ②Roller shaft F 15 ②~ SUJ2 55~58HRC P 30 55~58HRC SLCES(Sheet bar: S45C) SLCE(Sheet bar: Copper alloy) ⑧Oil-free bushing (L) ①~ SK3 ①Roller D S 90 (Stroke length) 13.5 64 25 45 65 27 20 74 SLCES 30 30 4−φ11 Oil-free bushing LFZF10−10(2 pcs.) For inquiry ... [email protected] For inquiry, ordering and other information, refer to 840 974 P.1269
© Copyright 2024 Paperzz