ShenZhen Leynew Technology Co.,Ltd
http://www.leynew.com
Product Specification
Name: Street light node controller
Model:
Name
Single light controller
Single light controller
Double light controller
Double light controller
Model
SL11
SL12
SL21
SL22
Dimming way
0-10V dimming
PWM dimming
0-10V dimming
PWM dimming
Summarization
Streetlights centralized manager is our company new street light control system,
adopt the most advanced Zigbee wireless technology, combined with GPRS technology,
WIFI technology, and embedded system, in the view of the present situation of LED street
light control system and the actual demand of energy saving and accurate control, then
put forward wireless network, single point control, multipoint control solutions, it can
long-range control single light switch, dimming, detection and other functions. Built-in
multiple strategies, realize independent operation, ensure when the wireless
communication breakdown, it also can switch on/off the light. With easy to implement, no
need to wiring, strong anti-interference, expansion and so on features. And in the aspect
of the client side uses a variety of ways: mobile phone, tablet, computer, convenient for
different person timely control street light important data.
Technical parameters
Single light controller:
ADD: Block 1,Floor 4, Dacheng Industrial Zone,New Mabu Village,Shiyan Town, Bao'an District,
Shenzhen City, Guangdong,China
TEL: +86-0755-29686890 / 29686239
FAX: +86-0755-29686158
E-mail: [email protected]
Page 1 of 3
ShenZhen Leynew Technology Co.,Ltd
http://www.leynew.com
1.
2.
3.
4.
5.
6.
7.
8.
Working temperature: -20-60℃
Wireless frequency: 2.4G ISM Global free channel(ZigBee)
Network type: star network, mesh network(MESH)
Network capacity: 200 network nodes
Transmission distance: 200m
Input power supply: AC 220V 50Hz(two-phase three-wire system)
Output power supply: AC 220V 50Hz
Main function: switching, dimming, temperature, power detection and other
functions on the street lights
9. External dimension: L141.02ΧW63.30ΧH38.00mm
10. Net weight: 359g
11. Gross weight: 449g
12. Static power consumption: <3.0W
External dimension(mm)
Direction for use:
Connect the load wire at first, following by the power wire, after controller start
success, load light will gradually bright, after reaching the highest brightness, load light will
continuous flash 5 times, then self-test completed.
Binding instruction:
Streetlight node controller must binding with the centralized manager first, then it can
do switching, dimming, temperature acquisition such operation to load light, thus before
use, it need to binding with centralized manager first.
Binding methods: street light node controller beside with a button, long press the
ADD: Block 1,Floor 4, Dacheng Industrial Zone,New Mabu Village,Shiyan Town, Bao'an District,
Shenzhen City, Guangdong,China
TEL: +86-0755-29686890 / 29686239
FAX: +86-0755-29686158
E-mail: [email protected]
Page 2 of 3
ShenZhen Leynew Technology Co.,Ltd
http://www.leynew.com
button for 5 seconds, the red light flashing fast, means enter into binding state, after set
the lamp post number and controller number in the centralized manager, choose the
binding, after the success of binding, the LCD screen will show "successful". At this time
the street light node controller red indicator will recovery flash slow, means set up
complete.
典型应用：
ADD: Block 1,Floor 4, Dacheng Industrial Zone,New Mabu Village,Shiyan Town, Bao'an District,
Shenzhen City, Guangdong,China
TEL: +86-0755-29686890 / 29686239
FAX: +86-0755-29686158
E-mail: [email protected]
Page 3 of 3