MX
19, rue de Rennes
BP 83221
F - 35690 ACIGNE
www.m-x.eu
Press contact
Coralie Jagu
E-mail: [email protected]
Tel.: +33 (0)2 99 62 52 60
Fax: +33 (0)2 99 62 50 22
PRESS RELEASE
January 2011
INNOVATION:
Introducing the first front linkage with cast linkage
frame featuring 2 operating positions
MX is introducing the first MX branded front linkage featuring a cast
linkage frame at SIMA 2011. A compact, clean and integrated design,
above all it offers two operating positions: the only one on the market!
ROBUST, COMPACT AND INTEGRATED
The front linkages range has gained a unit featuring a highly innovative cast linkage frame. Designed and
manufactured from a single casting, it is robust, rigid and fully compatible with all tractors. Furthermore
its smooth surface prevents dirt from accumulating and a clean design makes for a compact product.
THE ONLY ONE WITH 2 OPERATING POSITIONS
The new MX front linkage with cast linkage frame is the only product on the market featuring two
operating positions (high position/low position). This unique new product adds height of up to 100 mm
in order to:
- provide easier access to sloping fields and/or negotiate embankments,
- ensure the optimum tractor/front implement combination, regardless of tyre fitment,
- match the operating height to the type of implement used (e.g.: subsoilers, front tamper, disc harrows,
etc.).
On show on the MX stand, Hall 5B, Stand A133
Available spring 2011
7
MX
19, rue de Rennes
BP 83221
F - 35690 ACIGNE
www.m-x.eu
Press contact
Coralie Jagu
E-mail: [email protected]
Tel.: +33 (0)2 99 62 52 60
Fax: +33 (0)2 99 62 50 22
HD VISUALS AND LEGENDS
MX_RA_PM_travail.jpg:
Linkage with cast linkage frame in
operating position
MX_RA_PM_transport.jpg:
Linkage with cast linkage frame in
transport position
8
MX
19, rue de Rennes
BP 83221
F - 35690 ACIGNE
www.m-x.eu
Press contact
Coralie Jagu
E-mail: [email protected]
Tel.: +33 (0)2 99 62 52 60
Fax: +33 (0)2 99 62 50 22
MX_RA_PM_bas.jpg:
Linkage with cast linkage
frame in low operating
position
MX_RA_PM_bas_zoom.jpg:
Pin in low operating position
MX_RA_PM_haut.jpg:
Linkage with cast linkage
frame in high operating
position
MX_RA_PM_haut_zoom.jpg:
Pin in high operating
position
9