V IPER
SI2
SLA®
SYSTEM
Technology:
Stereolithography, SLA
Material Class:
Liquid; Photo Reactive
Two solid imagers in one – for unprecedented versatility
The Viper si2 SLA system is our first solid imaging system to combine
standard AND high-resolution part building in the same system. Now,
with one machine, you can tackle an unequalled range of solid imaging
applications. And you can take advantage of scores of cost-saving,
productivity-enhancing innovations, including state-of-the-art components, improved system software, and much more.
A dual resolution and long life laser – another 3D Systems first.
The Viper si2 system lets you choose between standard resolution
mode, for the best balance of build speed and part resolution, and high
resolution (HR) mode for ultra-detailed small parts and features – all from
a carefully integrated digital signal processor (DSP) controlled high
speed scanning system with a single, solid-state laser that delivers
Tackle all these applications with one machine:
·
Small to medium-sized concept and
communication models
·
Small to medium-sized prototypes
·
Patterns for investment casting using the
QuickCast buildstyle
·
Parts with extremely fine detail
100 mW of available power.
Build superior quality parts for every application. The Viper si2 system builds parts with a smooth surface finish, high accuracy and
excellent fine feature detail that require minimal finishing. It’s ideal for
a myriad of solid imaging applications, from rapid modelling and prototyping, to patterns for investment casting.
Benefits
·
Long laser life
Lower your cost of ownership thanks to scores of design improve-
·
Low cost of ownership
ments. Longer laser life is just the beginning. Optimised for our SL
·
Fast scanning system
materials, the system’s new solid-state Viper laser delivers fast draw
·
Excellent part quality
speeds, and high throughput. What’s more, the entire system – from
·
Great range of applications
optics and electronics to the external enclosure has been designed
from the ground up for maximum productivity, reliability and serviceability.
State-of-the-art software. The Viper si2 system operates with the
latest versions of Lightyear part preperation and Buildstation control
software. Lightyear software provides ease of use and the Buildstation
software provides a reliable build process with little user intervention.
the solid imaging company
Viper si2 SLA System Specifications
Standards and Regulations: This SLA system conforms to Federal Laser Product Performance
Standards 21CFR1040.10 Class I laser in normal operation. During field service, emission levels
can correspond to Class IV laser product. The Viper si2 system complies with CE requirements.
LASER
Type
Wavelength
Power at vat
Laser Warranty
Solid state Nd:YVO4
354.7 nm
100 mW available
7500 hours or 12 months (whichever comes first)
RECOATING SYSTEM
Process
Zephyr recoating system
the solid imaging company
3D Systems Europe Ltd.
Mark House
Mark Road
Hemel Hempstead
Herts HP2 7UA
OPTICAL & SCANNING
Beam (diameter @ 1/e2)
Standard mode 0.250 +/- 0.025 mm
Hi res mode 0.075 +/- 0.015 mm
tel (+44) 1442 282 600
fax (+44) 1442 282 601
ELEVATOR
Vertical resolution
Position repeatability
Maximum part weight
Typical velocity during part building
0.0025 mm
0.0076 mm
9.1 kg
5 mm/sec
VAT C A PAC I T Y
Volume
Maximum build envelope in standard mode
Maximum build envelope in HR mode
Interchangeable vat
32.21 L
250 x 250 x 250 mm XYZ
125 x 125 x 250 mm XYZ
Yes
SYSTEM CONTROLLER & SOFTWARE
Control software
Operating system
Input data file format
Network type and protocol
Buildstation 5.3 software
Windows NT (4.0 with Service Pack 3 or higher)
.stl .slc
Ethernet, IEEE 802.3 10/100 Base-T
email [email protected]
3D Systems GmbH
Postfach 12 02 07
D-64239 Darmstadt
Germany
tel (+49) 61 51 / 3 57-0
fax (+49) 61 51 / 3 57-333
email [email protected]
POWER
100 - 120 VAC +/-10% 50/60 Hz, 6 amps
220 - 240 VAC +/-10% 50/60 Hz, 3 amps
UPS power rating
15 amp, 115V
8 amp, 230V
2KVA minimum
www.3dsystems.com
Nasdaq: TDSC
AMBIENT TEMPERATURE
Temperature range
Maximum change rate
Relative humidity
23°C +/- 3°C
1°C/hour
20 - 50%, non condensing
Crated machine
Uncrated machine
W168 x D102 x H211 cm
W134 x D86 x H178 cm
SIZE
WEIGHT
Crated machine
Uncrated machine
564 kg
463 kg
FRANCE
tel (+33) 1 69 35 17 17
HONG KONG
tel (+852) 2923 5077
OPTIONS
Additional interchangeable vats
Additional build platforms
Post Curing Apparatus (PCA) equipment
ITALY
tel (+39) 039 68 904 00
SYSTEM WARRANTY
One year from installation date.
Includes parts, labor, and 3D Systems’ software upgrades.
JAPAN
tel (+81) 3 5451 1690
USA
tel (+1) 661 295 5600 ext. 2882
© Copyright 2003 by 3D Systems Inc. All rights
reserved. Specifications subject to change without notice. The 3D logo and SLA are registered
trademarks and 3D Systems, si2, Lightyear,
Buildstation, PCA, and Zephyr are trademarks of
3D Systems. “the solid imaging company” is
a service mark of 3D Systems. All other product
names or services mentioned are trademarks
or registered trademarks of their respective
companies.
P/N 70433 Rev. 03/03-UK liedler.de