BV Lab Number:
Technician Name:
Test Date:
Reviewed By/Date:
DESTINATION MATERNITY CORPORATION TEST PROTOCOL FOR
DEST-06009-US
WATER BOTTLE
Evaluation
Citation/Method
No.
Samples
* CA Prop 65
CPSD-AN-PTCL-06572US
-
One Time Use Products
**Fair Packaging and Labeling Act
OR All Other Products
**Uniform Packaging and
Labeling Regulations
F.P. & L. Act
(16 CFR 500)
OR
NIST Uniform Laws and
Regulations Handbook
130
1
19 CFR 134
1
CPSD-HL-01057MTHD / Visual
1
Criteria
SUPPLEMENTAL PROTOCOLS
The sample should be reviewed against the requirements of
California Proposition 65 to determine if additional testing or
labeling is required.
* Food contact
CPSD-AN-PTCL-06001-The sample shall meet requirements of supplemental Protocol
US
CPSD-AN-PTCL-06001-US Food contact
* Non-CPSIA Requirements
DEST-GB-PTCL-08443All samples shall be reviewed against the requirements of
US
Non-CPSIA Requirements supplemental protocol to
determine if additional testing or labeling is required.
Note: Additional cost, sample size & TAT may be required if testing to one or more supplemental protocol is necessary.
Please refer to the above referenced supplemental protocol(s) for additional information.
LABELING
**Country of Origin Marking
Use labeling
Page 1 of 4
Manufacturer, Packer, or Distributor’s Name & Address (City,
State & ZIP Code)
Product Identification
Net quantity of contents shall be expressed in terms of weight
or mass, measure, numerical count, or combination so as to
give accurate information to facilitate consumer comparison
(U.S. and metric units).
Shall indicate country of origin legibly, permanently, and in
comparable size and close proximity to any mention of
country other than country in which the article was
manufactured or produced. Must be visible at point of
purchase.
Use/care instructions that are clear and understandable shall
be provided in English.
Results
Rating
BV Lab Number:
Technician Name:
DEST-06009-US
WATER BOTTLE
Evaluation
Claim verification - Level 2
Citation/Method
CPSD-HL-08612MTHD / Claim
verification
No.
Samples
All
Criteria
Examine the retail packaging (or submitted artwork).
Record each objective (factual) claim which can be
substantiated by the testing within this protocol and rate
accordingly.
Any net quantity/dimensional claims evaluated in other
sections of this protocol need not be recorded.
Record all other objective (factual) and subjective (opinion)
claims as ‘NT’ for Not Tested and rate as ‘FAIL’.
PHYSICAL CHARACTERISTICS
Dimensions
CPSD-HL-01056MTHD / Standard
measure
Weight
CPSD-HL-01056MTHD / Standard
measure
Capacity – volumetric
CPSD-HL-06000MTHD / Capacity
Parts inventory
CPSD-HL-01057MTHD / Visual
CONSTRUCTION & WORKMANSHIP
1
Report overall dimensions; shall meet label claims (if
applicable).
1
Report overall weight; shall meet label claims (if applicable).
1
Report overall capacity; shall meet label claims (if
applicable).
Shall meet label claims.
1
Sharp points and sharp edges
16 CFR 1500.48 /
1500.49 modified
All
Defects
CPSD-HL-01057MTHD / Visual
All
Defects
CPSD-HL-01057MTHD / Visual
All
Shall have no sharp points / edges, other than those required
for function.
Modification = expanded scope to other products.
Shall have no discernible surface degradation, including
crazing, shivering, denting, bubbles, cracks, stains,
deformations, chips, fractures, heavy lines, waves, shear
marks, scratches, scuff marks, indentations, or blisters.
Shall have no components missing, malformed, and/or
fractured.
Page 2 of 4
Results
Rating
BV Lab Number:
Technician Name:
DEST-06009-US
WATER BOTTLE
Evaluation
Citation/Method
No.
Samples
Criteria
CPSD-HL-01058MTHD / Actual use
All
CPSD-HL-01009MTHD / Oven
CPSD-HL-01008MTHD / Freezer
CPSD-HL-01027MTHD / Strength
CPSD-HL-01014MTHD / Dishwasher
CPSD-HL-01015MTHD / Staining
CPSD-HL-01058MTHD / Actual use
ASTM B117-07
modified / CPSD-HL01010-MTHD
1
Shall function as intended as received. Report details of
evaluation (features tested / methods used / materials used /
etc.) Report any features not evaluated.
NOTE: If the sample has a clasp / clip then test for
functionality and the clasp / clip shall be easy to operate
No visual change or failure after 4 hours at 120 °F
1
No visual change or failure after 4 hours at 0 °F
1
Min. 10 lb static load (Less than 1000 mL)
Min. 20 lb static load (Greater than 1000 mL)
Shall withstand 5 cycles in a name brand dishwasher with
name brand detergent with no color change or adverse effects.
Subject sample to various food materials. Shall have no
staining when cleaned according to supplied instructions.
Shall be no leakage when filled. Shall exhibit no leakage in
normal use (drinking) around seal, cap, etc.
Withstand 24 hours in 1% salt spray (fog) with no major
corrosion or visual change.
Modification = 1% salt (fog) spray.
Results
Rating
PERFORMANCE
Actual use - functionality - not
covered by other tests
Effects of heat
Cold exposure
Handle strength - loaded - if
applicable
Dishwasher exposure - if
applicable
Stain resistance
Resistance to leaking
Resistance to corrosion - metal
components
Key:
*
Additional Charge For This Test
Results Key:
M
Meets
NA
Not Applicable
C
Claimed
NM
NT
R
**
1
1
1
1
Mandatory Requirement
Does Not Meet
Not Tested
Recorded
No. Of Samples Required For Complete Testing:
No. Of (Fully Packed) Cartons For Transit Testing:
No. Of Working Days For Complete Testing:
4
1
7
Creation Date:
Editorial Revision Date:
Pricing Review Date:
Technical Review Date:
Page 3 of 4
25/01/10
BV Lab Number:
Technician Name:
Page 4 of 4