LEPMIS Game Access Solutions
Unique Solutions for Unique People
Game Console Case - User Guide
INTRODUCTION
The LEPMIS SAP-GCC Game Console Case offers protection for game access electronics and leads while
providing stable surfaces for the gamer to place switches into their optimum position. Supplied fitted with your
choice of very robust and accurate joysticks: the picture above shows one robust ‘arcade’ style switched
joystick and one very sensitive and precise analogue joystick.
The machined ply enclosure has a smart and tough grain finish coating capable of withstanding burns in
excess of 400˚C. The lid of the case is removable for access to the Switch Access Pod within. A slotted
foam insert in the back of the case allows cables to be routed into the enclosure securely..
The Switched joystick (if fitted) can be configured to operate in a four switch or eight switch mode. Remove
the circlip from the end of the shaft and fit the black plastic collar the other way up to select between 4 and 8
switch mode.
CLEANING INSTRUCTIONS
When necessary, the unit should be cleaned with a barely damp cloth, using only a tiny amount of
household detergent. DO NOT USE abrasive products or solvents.
The SAP-GCC must be re-cycled when no longer required. Please do not throw away in the general
refuse. Please return it to LEPMIS, or take it to your council recycling facility.
TECHNICAL SPECIFICATION
Size:
50cm wide, by 33cm deep, by 12cm high, ( not including cables)
Weight:
Approx 2.5 kg
Designed to meet the general requirements of the Medical Devices Directive 93/42/EEC 14 June 1993.
Supplied by:
Long Eaton Powered Mobility Integration Service
24 Laurel Crescent
Long Eaton
Nottingham
NG10 3NN
Tel:
0771 495 8061
e-mail:
[email protected]
On the WEB, at LEPMIS.co.uk
\\Harbach-home\lepmis-data\PRD\SAP-GCC\MNL\SAP-GCC_MNL.doc
Page 1 of 1