ISO Strategic Advisory Group - Security (SAG-S)
Inventory of security-related standards
Threat Collection - 2014
Foreword
This inventory was prepared by ISO Strategic Advisory Group on Security (SAG-S). The SAG-S issued a
data call to ISO members and the International Electrotechnical Commission (IEC) and the International
Telecommunication Union's Telecommunication Standardization Sector (ITU-T) asking that they provide
standards in the field of security. The SAG-S has sub-divided the inventory of standards provided into
three broad areas of security dealing with threats, timelines and targets. This inventory is limited to
those standards associated with threats.
This inventory on security threats expands and evolves. There are two companion documents listing
timelines and targets.
The inventory of threat standards lists standards in multiple categories.
1 Scope
This inventory of security threat standards and specifications identifies a collection of documents (which
it refers to as standards even though they encompass more than traditional ISO, IEC and ITU standards)
that provide guidance on meeting the needs posed by organizations concerned about security threats
from man-made or natural disasters. While its primary audience is standards developers, it can also be
helpful for developers of products and services and policy makers in the security field.
2 Terms and Definition
For the purposes of this document, the following terms and definitions apply.
2.1 Standard
Identifiable document that contains some specific guidance.
Note 1 to entry: In the context of this document, standards include: all ISO, ISO/IEC and ITU-T standards,
Technical Reports, Publicly Available Specifications, and all documents of other organizations that have a
similar function to these documents.
2.2 User
Person who interacts with the product or service
3 Standards Categories
There are many possible means of organizing the set of standards identified in this document. The
approach taken here is to categorize security standards in terms of threats, in terms of chronology of an
event (timelines) and in terms of targets of a terrorist attack or infrastructure that must be protected
from natural disasters. This organization does not provide mutually exclusive categories, but rather
categories that can be added together to provide increasingly detailed guidance to users. Standards will
1
be listed in all areas that apply, and standards concerned with risk management may well appear in two
or three of the categories.
3.1 Chemical, Biological, Radiological/Nuclear and Explosives (CBRNE) threats
Chemical, Biological, Radiological/Nuclear and Explosives (often abbreviated to CBRNE) is protective
measures taken in situations in which any of these four hazards are present. CBRNE standards address
products and services that relate to detection, personnel protection, decontamination, and mitigation.
3.1.1 Chemical threats
Includes warfare agents, toxic industrial chemicals, toxic industrial materials, aerosol dispersion,
water contamination, tank cars (Cl2), chemical plants, release of chemicals, and hazardous
materials.
3.1.2 Biological threats
Includes agent itself, viruses (ex. H1N1), proteins/toxins (ex. Ricin) and bacteria (ex. Bacillus
anthracis) and outcomes such as pandemics or infestations.
3.1.3 Radiological/Nuclear threats
Includes fission products (spent fuel), medical isotopes and industrial isotopes and special
nuclear material.
3.1.4 Explosives threats
Includes conventional military and industrial explosives, ANFO (ammonium nitrate/fuel oil), and
homemade (TATP) and precursors to homemade explosives.
3.2 Cybersecurity threats
Cybersecurity includes disruptive activities, or the threat thereof, against computers and/or networks,
with the result of harm.
3.3 Criminal threats
Standards which relate to criminal threats, excluding cyber threats which are in their own separate
category (3.2), are those intended to aid in identifying criminals such as biometrics standards (3.3.1) and
those that categorize criminal activities such as fraud and counterfeiting (3.3.2).
3.4 Natural Disasters
Natural disasters present a wide range of threats to the populace. Standards for the natural disaster
threats are subdivided here into categories of Geological Hazards (3.4.1) and Meteorological Hazards
(3.4.2). Many of these recurring disasters can be anticipated based on historical records and
increasingly accurate forecasting methodologies. Target communities may identify more specific
guidance on standards in the Targets and Timelines Collections.
3.4.1 Geological Hazard threats
Geological hazards include: Earthquakes, tsunamis, volcanoes, landslides, mudslides,
subsidence, glaciers and icebergs.
3.4.2 Meteorological Hazard threats
2
Meteorological Hazards include: flood, flash flood, seiche, tidal surge, drought, fire (e.g., forest,
range, urban, wildland, and urban interface), snow, ice, hail, sleet, avalanche, windstorm,
tropical cyclone, hurricane, tornado, water spout, dust/sand storm – extreme temperatures, and
lightning strikes.
3.1 Chemical, Biological, Radiological/Nuclear and Explosives (CBRNE) threats
3.1.1 Chemical threats
Document Number
Title
Organization
Status
ISO and ISO/IEC standards
ISO 10012
Measurement management
systems -- Requirements for
measurement processes and
measuring equipment
ISO
2003
ISO 10396
Stationary source emissions Sampling for the automated
determination of gas emission
concentrations for
permanently-installed
monitoring systems
Ambient air -- Determination of
sulfur dioxide -- Ultraviolet
fluorescence method
ISO
2007
ISO
2004
Water quality - Determination
of the activity concentration of
radionuclides - Method by high
resolution gamma-ray
spectrometry
Water quality - Measurement
of gross alpha and gross beta
activity in non-saline water Thin source deposit method
ISO
2007
ISO
2009
Water quality - Determination
of the toxic effect of sediment
and soil samples on growth,
fertility and reproduction of
Caenorhabditis elegans
(Nematoda)
ISO
2010
ISO 10498
ISO 10703
ISO 10704
ISO 10872
3
ISO 10882-2
Health and safety in welding
and allied processes -- Sampling
of airborne particles and gases
in the operators breathing zone
-- Part 2: Sampling of gases
ISO
2000
ISO 11041
Workplace air -- Determination
of particulate arsenic and
arsenic compounds and arsenic
trioxide vapour -- Method by
hydride generation and atomic
absorption spectrometry
ISO
1996
ISO 11704
Water quality - Measurement
of gross alpha and beta activity
concentration in non-saline
water - Liquid scintillation
counting method
Validation method for fire gas
analysis - Part 1: Limits of
detection and quantification
ISO
2010
ISO
2011
ISO 14000 Collection 1
ISO 14000 Collection 1
ISO
2007
ISO 14000 Collection 2
ISO 14000 Collection 2
ISO
2007
ISO 15859-10
Space systems -- Fluid
characteristics, sampling and
test methods -- Part 10: Water
ISO
2004
ISO 15859-13
Space systems -- Fluid
characteristics, sampling and
test methods -- Part 13:
Breathing air
Indoor air -- Part 1: General
aspects of sampling strategy
ISO
2004
ISO
2004
ISO 16000-2
Indoor air -- Part 2: Sampling
strategy for formaldehyde
ISO
2004
ISO 16017-1
Indoor, ambient and workplace
air -- Sampling and analysis of
volatile organic compounds by
sorbent tube/thermal
desorption/capillary gas
chromatography -- Part 1:
Pumped sampling
ISO
2000
ISO 12828-1
ISO 16000-1
4
ISO 16017-2
ISO 16200-1
ISO 16200-2
ISO 16602/Amd1
ISO 17491-2
ISO 17734-1
ISO 17734-2
Indoor, ambient and workplace
air -- Sampling and analysis of
volatile organic compounds by
sorbent tube/thermal
desorption/capillary gas
chromatography -- Part 2:
Diffusive sampling
Workplace air quality -Sampling and analysis of
volatile organic compounds by
solvent desorption/gas
chromatography -- Part 1:
Pumped sampling method
Workplace air quality -Sampling and analysis of
volatile organic compounds by
solvent desorption/gas
chromatography -- Part 2:
Diffusive sampling method
Protective clothing for
protection against chemicals Classification, labelling and
performance requirements Amendment 1
Protective clothing - Test
methods for clothing providing
protection against chemicals Part 2: Determination of
resistance to inward leakage of
aerosols and gases (inward
leakage test)
Determination of
organonitrogen compounds in
air using liquid chromatography
and mass spectrometry -- Part
1: Isocyanates using
dibutylamine derivatives
Determination of
organonitrogen compounds in
air using liquid chromatography
and mass spectrometry -- Part
2: Amines and
aminoisocyanates using
dibutylamine and ethyl
chloroformate derivatives
ISO
2003
ISO
2001
ISO
2000
ISO
Amendment 1 2012
ISO
2012
ISO
2006
ISO
2006
5
ISO 17852
Water quality - Determination
of mercury - Method using
atomic fluorescence
spectrometry
Water quality - Determination
of dioxin-like polychlorinated
biphenyls - Method using gas
chromatography/mass
spectrometry
Water quality -- Criteria for
establishing equivalence
between microbiological
methods
Water quality -- Determination
of chromium(VI) -- Photometric
method for weakly
contaminated water
ISO
2006
ISO
2007
ISO
2004
ISO
2005
Surface chemical analysis Auger electron spectroscopy
and X-ray photoelectron
spectroscopy - Determination
of lateral resolution
Water quality -- Determination
of selected alkylphenols -- Part
1: Method for non-filtered
samples using liquid-liquid
extraction and gas
chromatography with mass
selective detection
Water quality - Determination
of selected alkylphenols - Part
2: Gas chromatographic-mass
spectrometric determination of
alkylphenols, their ethoxylates
and bisphenol A in non-filtered
samples following solid-phase
extraction and derivatisation
ISO
2006
ISO
2005
ISO
2009
ISO 19250
Water quality - Detection of
Salmonella spp.
ISO
2010
ISO 19458
Water quality - Sampling for
microbiological analysis
ISO
2006
ISO 19493
Water quality - Guidance on
marine biological surveys of
hard-substrate communities
ISO
2007
ISO 17858
ISO 17994
ISO 18412
ISO 18516
ISO 18857-1
ISO 18857-2
6
ISO 20665
Water quality - Determination
of chronic toxicity to
Ceriodaphnia dubia
ISO
2008
ISO 20666
Water quality - Determination
of the chronic toxicity to
Brachionus calyciflorus in 48 h
ISO
2008
ISO 21338
Water quality - Kinetic
determination of the inhibitory
effects of sediment, other
solids and coloured samples on
the light emission of Vibrio
fischeri (kinetic luminescent
bacteria test)
Water quality - Evaluation of
genotoxicity by measurement
of the induction of micronuclei
- Part 1: Evaluation of
genotoxicity using amphibian
larvae
Water quality - Evaluation of
genotoxicity by measurement
of the induction of micronuclei
- Part 2: Mixed population
method using the cell line V79
ISO
2010
ISO
2006
ISO
2006
Water quality -- Determination
of certain explosives and
related compounds -- Method
using high-performance liquid
chromatography (HPLC) with
UV detection
Water quality -- Determination
of dalapon, trichloroacetic acid
and selected haloacetic acids -Method using gas
chromatography (GC-ECD
and/or GC-MS detection) after
liquid-liquid extraction and
derivatization
Surface chemical analysis Secondary-ion mass
spectrometry - Repeatability
and constancy of the relativeintensity scale in static
secondary-ion mass
spectrometry
ISO
2006
ISO
2006
ISO
2008
ISO 21427-1
ISO 21427-2
ISO 22478
ISO 23631
ISO 23830
7
ISO 23893-1
Water quality - Biochemical and
physiological measurements on
fish - Part 1: Sampling of fish,
handling and preservation of
samples
Water quality - Determination
of individual isomers of
nonylphenol - Method using
solid phase extraction (SPE) and
gas chromatography/mass
spectrometry (GC/MS)
Water quality - Determination
of selected plant treatment
agents and biocide products Method using solid-phase
microextraction (SPME)
followed by gas
chromatography-mass
spectrometry (GC-MS)
Water quality - Determination
of total nitrogen after UV
digestion - Method using flow
analysis (CFA and FIA) and
spectrometric detection
ISO
2007
ISO
2009
ISO
2010
ISO
2010
ISO 4121
Sensory analysis -- Guidelines
for the use of quantitative
response scales
ISO
2003
ISO 4219
Air quality -- Determination of
gaseous sulphur compounds in
ambient air -- Sampling
equipment
Water quality -- Sampling -Part 10: Guidance on sampling
of waste waters
ISO
1979
ISO
1992
ISO 5667-12
Water quality -- Sampling -Part 12: Guidance on sampling
of bottom sediments
ISO
1995
ISO 5667-14
Water quality -- Sampling -Part 14: Guidance on quality
assurance of environmental
water sampling and handling
ISO
1998
ISO 24293
ISO 27108
ISO 29441
ISO 5667-10
8
ISO 5667-15
Water quality - Sampling - Part
15: Guidance on the
preservation and handling of
sludge and sediment samples
ISO
2009
ISO 5667-16
Water quality -- Sampling -Part 16: Guidance on biotesting
of samples
Water quality - Sampling - Part
17: Guidance on sampling of
bulk suspended solids
ISO
1998
ISO
2008
ISO 5667-19
Water quality -- Sampling -Part 19: Guidance on sampling
of marine sediments
ISO
2004
ISO 5667-20
Water quality - Sampling - Part
20: Guidance on the use of
sampling data for decision
making - Compliance with
thresholds and classification
systems
Water quality -- Sampling -Part 4: Guidance on sampling
from lakes, natural and manmade
Water quality -- Sampling -Part 5: Guidance on sampling of
drinking water from treatment
works and piped distribution
systems
Water quality -- Sampling -Part 8: Guidance on the
sampling of wet deposition
ISO
2008
ISO
1987
ISO
2006
ISO
1993
ISO 5667-9
Water quality -- Sampling -Part 9: Guidance on sampling
from marine waters
ISO
1992
ISO 5815-2
Water quality -- Determination
of biochemical oxygen demand
after n days (BODn) -- Part 2:
Method for undiluted samples
ISO
2003
ISO 607
Surface active agents and
detergents -- Methods of
sample division
ISO
1980
ISO 6107-2
ISO 6107-2
Water quality -- Vocabulary
Water quality -- Vocabulary
ISO
ISO
2006
2006
ISO 5667-17
ISO 5667-4
ISO 5667-5
ISO 5667-8
9
ISO 6703-1
Water quality -- Determination
of cyanide -- Part 1:
Determination of total cyanide
ISO
1984
ISO 6703-2
Water quality -- Determination
of cyanide -- Part 2:
Determination of easily
liberatable cyanide
Water quality -- Determination
of cyanide -- Part 3:
Determination of cyanogen
chloride
Water quality -- Determination
of ammonium -- Potentiometric
method
ISO
1984
ISO
1984
ISO
1984
ISO 7150-1
Water quality -- Determination
of ammonium -- Part 1: Manual
spectrometric method
ISO
1984
ISO 7708
Air quality -- Particle size
fraction definitions for healthrelated sampling
ISO
1995
ISO 8760
Work-place air -- Determination
of mass concentration of
carbon monoxide -- Method
using detector tubes for shortterm sampling with direct
indication
Work-place air -- Determination
of mass concentration of
carbon monoxide -- Method
using detector tubes for shortterm sampling with direct
indication
Work-place air -- Determination
of mass concentration of
nitrogen dioxide -- Method
using detector tubes for shortterm sampling with direct
indication
Water quality - Detection and
enumeration of coliform
organisms, thermotolerant
coliform organisms and
presumptive Escherichia coli Part 1: Membrane filtration
method - Corrigendum
ISO
1990
ISO
1990
ISO
1989
ISO
Corrigendum 1 2007
ISO 6703-3
ISO 6778
ISO 8760
ISO 8761
ISO 9308-1/Cor1
10
ISO 9359
Air quality -- Stratified sampling
method for assessment of
ambient air quality
ISO
1989
ISO 9377-2
Water quality -- Determination
of hydrocarbon oil index -- Part
2: Method using solvent
extraction and gas
chromatography
Water quality -- Determination
of borate -- Spectrometric
method using azomethine-H
ISO
2000
ISO
1990
ISO 9486
Workplace air -- Determination
of vaporous chlorinated
hydrocarbons -- Charcoal
tube/solvent desorption/gas
chromatographic method
ISO
1991
ISO 9487
Workplace air -- Determination
of vaporous aromatic
hydrocarbons -- Charcoal
tube/solvent desorption/gas
chromatographic method
ISO
1991
ISO 9696
Water quality - Measurement
of gross alpha activity in nonsaline water - Thick source
method
Water quality -- Determination
of dissolved bromate -- Method
using liquid chromatography of
ions and post column reaction
(PCR)
Water quality -- Determination
of measurement uncertainty
based on validation data
ISO
2007
ISO
2011
ISO
2012
Water quality -- Determination
of short chain polychlorinated
alkanes (SCCP) in water -Method using gas
chromatography/mass
spectrometry (GC-MS) and
negative ion chemical
ionisation (NCI)
ISO
2012
ISO 9390
ISO 11206
ISO 11352
ISO 12010
11
ISO 27911
Surface chemical analysis ISO
Scanning Probe MicroscopyDefinition and calibration of
lateral resolution of a Near-field
optical microscope
Water quality -- Determination ISO
of 16 polycyclic aromatic
hydrocarbons (PAH) in water -Method using gas
chromatography with mass
spectrometric detection (GCMS)
Water quality - Scientific and
ISO
technical aspects of batch algae
growth inhibition tests
2011
Water quality -- Determination
of nitrogen -- Part 2:
Determination of bound
nitrogen, after combustion and
oxidation to nitrogen dioxide,
chemiluminescence detection
Water quality -- Guidance on
validation of microbiological
methods
ISO
1997
ISO
2000
Surface chemical analysis Glow discharge mass
spectrometry (GD-MS) Introduction to use
Water quality -- Guidance for
establishing the equivalency of
results
ISO
2009
ISO
2006
ISO/TS 20281
Water quality -- Guidance on
statistical interpretation of
ecotoxicity data
ISO
2006
ISO/TS 22475-2
Geotechnical investigation and
testing - Sampling methods and
groundwater measurements Part 2: Qualification criteria for
enterprises and personnel
ISO
2006
ISO/TS 23893-2
Water quality - Biochemical and
physiological measurements on
fish - Part 2: Determination of
ethoxyresorufin-O-deethylase
(EROD)
ISO
2007
ISO 28540
ISO/TR 11044
ISO/TR 11905-2
ISO/TR 13843
ISO/TS 15338
ISO/TS 16489
2011
2008
12
IWA 6
Guidelines for the management
of drinking water utilities under
crisis conditions
ISO
2008
Other Global Standards and
Guidelines
AEP-(F)
Manual of techniques of
sampling and analysis of gases
and liquified gases for aircraft
servicing
NATO
2009
STANAG 2391 ED 2
Explosive Ordnance Disposal
Recovery Operations on Fixed
Installations - AEODP-5
NATO
2010
STANAG 2399 ED 1
AMD 1
Battlefield Recovery/Evacuation NATO
Operations; Amendment 1,
1992
STANAG 2399 ED 1
AMD 2
Battlefield Recovery/Evacuation NATO
Operations Amendment 2
1995
STANAG 3946
(RESTRICTED) Maximum
Dosage of Nerve Agent Vapour
to the Eyes Acceptable for
Aircrew
NATO
STANAG 3977 ED 4
Manual of Techniques of
Sampling and Analysis of Gases
and Liquefied Gases for Aircraft
Servicing - AEP-6(A)
NATO
1985 AMD 5 2006
08/16/2006
1985 AMD 4 1997
07/08/1997
1985 AMD 3 1992
11/20/1992
1985 AMD 2 1991
10/02/1991
1985 AMD 1 1988
04/27/1988
1ED 1985 12/20/1985
2009
MOM1PE
Wastewater Sampling for
Process and Quality Control
WEF
1980
P0013PE
Hazardous Waste Site
Remediation Management
WEF
1990
P0080PE
Hazardous Waste Site
Remediation: Assessment &
Characterization
WEF
1988
13
Regional and national
standards, guidelines and
regulations
T301
Standard Method of Test for
Elastic Recovery Test of
Bituminous Materials by Means
of a Ductilometer Twentieth
Edition
Air Sampling Instruments, 7th
Edition
AASHTO
2011
ACGIH
1989
9044
LC 91-15752
Advances in Air Sampling
Groundwater Residue Sampling
Design
ACGIH
ACS
1988
1991
ASTM D1356
Standard Terminology Relating
to Sampling and Analysis of
Atmospheres
ASTM
2005. Reapproved 2010
ASTM D3284
Standard Practice for
Combustible Gases in the Gas
Space of Electrical Apparatus
Using Portable Meters
Standard Practice for
Calibration Techniques Using
Permeation Tubes
Standard Test Method for
Determination of Ethylene
Oxide in Workplace
Atmospheres (Charcoal Tube
Methodology)
Standard Test Method for
Respirable Dust in Workplace
Atmospheres Using Cyclone
Samplers
ASTM
2005. Reapproved 2011
ASTM
2000. Reapproved 2010
ASTM
1998. Reapproved 2009
ASTM
2010
ASTM D4599
Standard Practice for
Measuring the Concentration of
Toxic Gases or Vapors Using
Length-of-Stain Dosimeters
ASTM
2003. Reapproved 2009
ASTM D4766
Standard Test Method for Vinyl
Chloride in Workplace
Atmospheres (Charcoal Tube
Method)
Standard Test Method for
Determination of Ethylene
Oxide in Workplace
Atmospheres (HBr
ASTM
1998. Reapproved 2009
ASTM
2004. Reapproved 2010
29
ASTM D3609
ASTM D4413
ASTM D4532
ASTM D5578
14
Derivatization Method)
ASTM D5755
Standard Test Method for
Microvacuum Sampling and
Indirect Analysis of Dust by
Transmission Electron
Microscopy for Asbestos
Structure Number Surface
Loading
Standard Guide for Use of
Hollow-Stem Augers for
Geoenvironmental Exploration
and the Installation of
Subsurface Water-Quality
Monitoring Devices
Standard Guide for Use of
Casing Advancement Drilling
Methods for Geoenvironmental
Exploration and Installation of
Subsurface Water-Quality
Monitoring Devices
Standard Test Method for
Determination of Non-Methane
Organic Compounds (NMOC) in
Ambient Air Using Cryogenic
Preconcentration and Direct
Flame Ionization Detection
Method (Metric)
ASTM
2009
ASTM
1995. Reapproved 2006
ASTM
1995. Reapproved 2006
ASTM
1996. Reapproved 2009
ASTM D6060
Standard Practice for Sampling
of Process Vents With a
Portable Gas Chromatograph
ASTM
1996. Reapproved 2009
ASTM D6306
Standard Guide for Placement
and Use of Diffusion Controlled
Passive Monitors for Gaseous
Pollutants in Indoor Air
ASTM
2010
ASTM D6327
Standard Test Method for
Determination of Radon Decay
Product Concentration and
Working Level in Indoor
Atmospheres by Active
Sampling on a Filter
ASTM
2010
ASTM D5784
ASTM D5872
ASTM D5953M
15
ASTM D6345
Standard Guide for Selection of
Methods for Active, Integrative
Sampling of Volatile Organic
Compounds in Air
ASTM
2010
ASTM D6363
Standard Test Method for
Determination of Hydrogen
Peroxide and Combined
Organic Peroxides in
Atmospheric Water Samples by
Peroxidase Enzyme
Fluorescence Method
Standard Guide for Selecting
Instruments and Methods for
Measuring Air Quality In
Aircraft Cabins
ASTM
1998. Reapproved 2009
ASTM
2010
Standard Test Method for
Determination of Metals and
Metalloids in Airborne
Particulate Matter by
Inductively Coupled Plasma
Atomic Emission Spectrometry
(ICP-AES)
Standard Test Method for
Metal Removal Fluid Aerosol in
Workplace Atmospheres
ASTM
2010
ASTM
2004. Reapproved 2010
Standard Test Method for
Categorization and
Quantification of Airborne
Fungal Structures in an Inertial
Impaction Sample by Optical
Microscopy
Standard Practice for
Characterizing Uncertainty in
Air Quality Measurements
ASTM
2009
ASTM
2008
ASTM D7520
Standard Test Method for
Determining the Opacity of a
Plume in the Outdoor Ambient
Atmosphere
ASTM
2009
ASTM E1445
Standard Terminology Relating
to Hazard Potential of
Chemicals
ASTM
2008
ASTM D6399
ASTM D7035
ASTM D7049
ASTM D7391
ASTM D7440
16
ASTM E2020
Standard Guide for Data and
Information Options for
Conducting an Ecological Risk
Assessment at Contaminated
Sites
Standard Specification for
Chemical Warfare Vapor
Detector (CWVD)
Standard Guide for
Development of Conceptual
Site Models and Remediation
Strategies for Light
Nonaqueous-Phase Liquids
Released to the Subsurface
Standard Guide for Remedy
Selection Integrating Risk-Based
Corrective Action and Non-Risk
Considerations
ASTM
1999. Reapproved 2010
ASTM
2007
ASTM
2006
ASTM
2009
Standard Specification for
Personnel Decontamination
System to be Used During a
Chemical Event
Standard Specification for
Handheld Point Chemical Vapor
Detectors (HPCVD) for
Homeland Security Applications
ASTM
2010
ASTM
2013
ASTM E981
Standard Test Method for
Estimating Sensory Irritancy of
Airborne Chemicals
ASTM
2004. Reapproved 2012
ASTM F1001
Standard Guide for Selection of
Chemicals to Evaluate
Protective Clothing Materials
ASTM
2012
ASTM F2061
Standard Practice for Chemical
Protective Clothing: Wearing,
Care, and Maintenance
Instructions
Source Water Protection
ASTM
2012
AWWA
2007
Methods of Sampling and
Testing Soaps and Detergents
Determination of WaterInsoluble Matter in Soaps
CGSB
1994
ASTM E2411
ASTM E2531
ASTM E2616
ASTM E2739
ASTM E2885
ANSI/AWWA G300
2.11-94 10.1CAN/CGSB
17
2.11-94 10.2CAN/CGSB
Methods of Sampling and
Testing Soaps and Detergents
Determination of WaterInsoluble Matter in Synthetic
Detergents Containing Silicates
or Phosphates
Methods of Sampling and
Testing Soaps and Detergents
Determination of WaterInsoluble Matter in Synthetic
Detergents
Methods of Sampling and
Testing Soaps and Detergents
Determination of WaterInsoluble Matter in Chemicals
CGSB
1994
CGSB
1994
CGSB
1994
2.11-94 13.2CAN/CGSB
Methods of Sampling and
Testing Soaps and Detergents
Determination of Water
Content (Distillation Method)
CGSB
1994
2.11-94 19.1CAN/CGSB
Methods of Sampling and
Testing Soaps and Detergents
Determination of Stability to
Hard Water Corrigendum
March 1995
Methods of Sampling and
Testing Soaps and Detergents
Determination of Stability to
Sea Water (Rectificatif-Mars
1995)
Methods of Sampling and
Testing Soaps and Detergents
Determination of Surface
Tension
Methods of Sampling and
Testing Waxes and Polishes
Resistance to Water Spotting
Supersedes 25-GP-1M, Method
28.1
Methods of Sampling and
Testing Waxes and Polishes
Solubility in Water Supersedes
25-GP-1M, Method 45.1
CGSB
1994
CGSB
1994
CGSB
1994
CGSB
1995
CGSB
1995
2.11-94 10.3CAN/CGSB
2.11-94 10.4CAN/CGSB
2.11-94 19.2CAN/CGSB
2.11-94 46.1CAN/CGSB
25.1 NO. 28.1
CAN/CGSB
25.1 NO. 45.1
CAN/CGSB
18
DIN 1988-4
Drinking water supply systems;
drinking water protection and
drinking water quality control
(DVGW code of practice)
DIN
1988
DIN EN 12905
Products used for treatment of
water intended for human
consumption - Expanded
aluminosilicate
DIN
2006
DIN EN 12906
Products used for treatment of
water intended for human
consumption - Pumice
DIN
2006
DIN EN 12909
Products used for treatment of
water intended for human
consumption - Anthracite
DIN
2006
DIN EN 12910
Products used for treatment of
water intended for human
consumption - Garnet
DIN
2006
DIN EN 12912
Products used for treatment of
water intended for human
consumption - Barite
DIN
2006
DIN EN 12913
Products used for treatment of
water intended for human
consumption - Powdered
diatomaceous earth
DIN
2006
DIN EN 12914
Products used for treatment of
water intended for human
consumption - Powdered
perlite
Determination of Specific Sulfur
Compounds by Capillary Gas
Chromatography and Sulfur
Chemiluminescence Detection
DIN
2006
GPA
1999
ANSI/IEST/ISO 146448
Cleanrooms and associated
controlled environments - Part
8: Classification of airborne
molecular contamination
IEST
2006
ANSI/ISA S71.04
Environmental Conditions for
Process Measurement and
Control Systems: Airborne
Contaminants
Performance Requirements for
Chlorine Detection Instruments
(0.5-30 ppm Full Scale)
ISA
1985
ISA
1998
STD 2199
ISA S92.06.01
19
A 0080
Electrostatic Dust Sampler and
Measuring Method for Mass of
Airborne Dust by the
Electrostatic Dust Sampler
KSA
1982
A 0082
Low Volume Air Samplers and
Methods for Measuring Mass
Concentration of Airborne Dust
by the Low Volume Air
Samplers
Testing Methods for Specific
Resistivity Recovery
Characteristic of Water Filtered
by Membranes
Sampling Methods for
Industrial Water and Industrial
Wastewater
Sampling Methods for
Pesticides of Industrial Water
and Waste water
Testing Methods for Detection
and Estimation of MicroBiological Contaminants in
Highly Purified Water
KSA
1993
KSA
1991
KSA
1998
KSA
1998
KSA
1999
M 9110
Water Quality-Sampling
(Guidance on the Design of
Sampling Programs)
KSA
1996
M 9111
Water Quality-Sampling
(Guidance on Sampling
Techniques)
Water Quality-Sampling
(Guidance on the Preservation
and Handling of Samples)
KSA
1996
KSA
1996
M 9113
Water Quality-Sampling
(Guidance on Sampling from
Lakes, Natural and Man-Made
KSA
1996
M 9114
Water Quality-Sampling
(Guidance on Sampling of
Drinking Water and Water Used
for Food and Beverage
Processing)
Water Quality-Sampling
(Guidance on Sampling of
Rivers and Streams)
Water Quality-Sampling
(Guidance on the Sampling of
KSA
1996
KSA
1996
KSA
1996
M 0104
M 0108
M 0109
M 0140
M 9112
M 9115
M 9117
20
Wet Deposition)
M 9118
Water Quality-Sampling
(Guidance on Sampling from
Marine Waters)
Water Quality-Sampling
(Guidance on Sampling of
Waste Waters)
Water Quality-Sampling
(Guidance on Sampling of
Groundwaters)
Water Quality-Sampling in
Deep Waters for MacroInvertebrates (Guidance on the
Use of Colonization, Qualitative
and Quantitative Samplers)
KSA
1996
KSA
1996
KSA
1996
KSA
1996
M 9197
Water Quality - Sampling Part
13: Guidance on Sampling of
Sludges from Sewage and
Water - Treatment Works
KSA
1998
M 9225
Water Quality - Sampling - Part
14: Guidance on Quality
Assurance of Environmental
Water Sampling and Handling
KSA
1999
M 9404
Air Quality-Particle Size Fraction KSA
Definitions for Health-Related
Sampling
1996
M 9406
Air Quality-Determination of
Gaseous Sulphur Compounds in
Ambient Air (Sampling
Equipment)
Chemical Agent Decontaminant
Materials Interim Issue 1
(03.95) (Supersedes TS 50070)
KSA
1996
MODUK
1995
NFPA 495
PN 407
Explosive Materials Code
Securing LP-Gas Air/Soil
Samples in Sampling Containers
NFPA2
NPGA
2010
1988
NSF/ANSI 61
Drinking water system
components - Health effects
NSF
2007
ONORM EN 1018
Chemicals used for treatment
of water intended for human
consumption - Calcium
carbonate (consolidated
version)
ON
2008
M 9119
M 9120
M 9121
DEF STAN 68-156
21
ONORM EN 12518
Chemicals used for treatment
of water intended for human
consumption - High-calcium
lime
Chemical attack on concrete Determination of aggressive
carbon dioxide content in water
ON
2008
ON
2007
ONORM EN 1407
Chemicals used for treatment
of water intended for human
consumption - Anionic and nonionic polyacrylamides
ON
2008
ONORM EN 1408
Chemicals used for treatment
of water intended for human
consumption - Poly
(diallyldimethylammonium
chloride)
ON
2008
ONORM EN 1409
Chemicals used for water
treatment intended for human
consumption - Polyamines
ON
2008
ONORM EN 1410
Chemicals used for treatment
of water intended for human
consumption - Cationic
polyacrylamides
ON
2008
ONORM EN 15482
Chemicals used for treatment
of water intended for human
consumption - Sodium
permanganate
ON
2008
ONORM EN 1717
Protection against pollution of
potable water in water
installations and general
requirements of devices to
prevent pollution by backflow
ON
2008
ONORM EN 900
Chemicals used for treatment
of water intended for human
consumption - Calcium
hypochlorite
Air quality - Guidelines for
estimating measurement
uncertainty (ISO 20988:2007)
ON
2008
ON
2007
ONORM EN 13577
ONORM EN ISO 20988
22
ONORM EN ISO 23631
Water quality - Determination
of dalapon, trichloroacetic acid
and selected haloacetic acids Method using gas
chromatography (GC-ECD
and/or GC-MS detection) after
liquid-liquid extraction and
derivatization (ISO 23631:2006)
(consolidated version)
Methods of sampling and
analysis of ambient air Determination of sulfur dioxide
- Direct reading instrumental
method
Methods for sampling and
analysis of ambient air Determination of suspended
particulate matter - PM10
continuous direct mass method
using a tapered element
oscillating microbalance
analyser
Methods for sampling and
analysis of ambient air Determination of suspended
particulate matter - PM10 beta
attenuation monitors
Electrical apparatus for
detection of oxygen and other
gases and vapours at toxic
levels - General requirements
and test methods
Surface Active Agents and
Detergents - Methods of
Sample Division
ON
2008
SAI
2008
SAI
2008
SAI
2008
SAI
2007. Amendment 1 2008
SASO
1994
EN 1410
Chemicals used for treatment
of water intended for human
consumption - Cationic
polyacrylamides
SIS-EN
2008
RP 50
Leak Testing of New MC 306
Cargo Tank Vapor Recovery
Systems
Vapor Recovery Adapters for
MC 307 and DOT 407 Chemical
Tank Vehicles Used for Closed
Loading, Unloading, and Vapor
TTMA
Published in
TTMA
Published in
AS 3580.4.1
AS 3580.9.8
AS/NZS 3580.9.11
AS/NZS 4641 /Amdt 1
495
RP 79
23
Recovery
RP 83
Leak Testing Newly
Manufactured DOT 406 Cargo
tanks and Cargo Tank Vapor
Recovery System
Kit, water purification,
emergency
Truck, tank a/s32a-24, potable
water
Identification marking of
aluminum, magnesium, and
titanium (s/s by sae-ams2808,
sae-ams2809, and astmb666/b666m)
Alarm, chemical agent,
automatic, portable abca-m8
(no s/s document)
TTMA
Published in
US DoD
2007
US DoD
2008
US DoD
2006
US DoD
1995
MIL-C-00337C NOT 1
Chemical agent, plasticized
white phosphorous (pwp) (no
s/s document)
US DoD
1995
MIL-C-10463B NOT 1
Chemical agent, cyanogen
chloride (no s/s document)
US DoD
1995
MIL-C-10758D NOT 2
Chemical agent, gb (no s/s
document)
US DoD
1995
MIL-C-10856D NOT 3
Chemical agent, mustard
simulated (molasses residuum)
US DoD
1994
MIL-C-12051B NOT 2
Chemical agent, mustard,
distilled (hd) (no s/s document)
US DoD
2004
MIL-C-357A NOT 1
Chemical agent, titanium
tetrachloride (no s/s document)
US DoD
1995
MIL-C-51386A NOT 2
Case, detector unit, chemical
agent automatic alarm (no s/s
document)
US DoD
1995
MIL-C-85829
Coupling assembly, hose,
chemical, biological,
radiological protective
US DoD
2011
A-A-52122B
A-A-59103B
FED-STD-184B NOT 2
MIL-A-51383A NOT 1
24
MIL-D-0051256C NOT
2
Detector kit, chemical agent,
abc-m18a2 (no s/s document)
US DoD
1999
MIL-D-50030H(1) NOT
3
Decontaminating Agent, D82
(S/S by MIL-DTL-12468)
US DoD
2009
MIL-D-51256B NOT 2
Detector kit, chemical agent,
abc-m18a2 (no s/s document)
US DoD
2002
MIL-D-51389A NOT 1
Detector unit, chemical agent
automatic alarm, abca-m43 (no
s/s document)
US DoD
1995
MIL-DTL-64159
Coating, water dispersible
aliphatic polyurethane,
chemical agent resistant
US DoD
2009
MIL-HDBK-1200
Chemical and biological (cb)
agents detection and
monitoring systems
Chemical and biological (cb)
contamination avoidance and
decontamination
US DoD
2011
US DoD
2011
MIL-HDBK-784
Guidelines-design to minimize
contamination and to facilitate
decontamination of military
vehicles and other equipment:
interiors and exteriors
US DoD
2011
MIL-M-51394B NOT 2
Mounting kit, chemical agent
automatic alarm: low profile,
abca-m182
US DoD
2004
MIL-R-51197B NOT 1
Reagent, solvent, and test
papers for sampling and
annalyzing kit, cbr agents (no
s/s document)
Primer, Cathodic
Electrodeposition, Chemical
Agent Resistant (Replaced by
the Qualified Products
Database (QPD) see Notice for
Additional Information)
US DoD
1995
US DoD
2008
MIL-HDBK-783
QPL-53084-6 NOT 1
25
VDI 2090 Blatt 1
Ambient air measurement VDI
deposition measurement of low
volatile organic compounds determination of pcdd/f
deposition; bergerhoff sampling
device and gc/hrms analysis
2001
VDI 2090 Blatt 2
Ambient air measurement deposition measurement of low
volatile organic compounds determination of pcdd/fdeposition; funnel adsorber
sampling and gc/hrms-analysis
VDI
2002
VDI 2100 Blatt 2
Determination of gaseous
VDI
compounds in ambient air determination of indoor air
pollutants - gas
chromatographic
determination of organic
compounds - active sampling by
accumulation on activated
charcoal - solvent extraction
2010
VDI 2267 Blatt 1
Determination of suspended
matter in ambient air measurement of the element
concentration after sampling
on filters - determination of AL,
AS, BA, CA, CD, CO, CR, CU, FE,
K, MG, MN, NA, NI, PB, SB, SE,
SN, TL, V and ZN by graphite
furnace atomic absorption
VDI
2012
VDI 2267 Blatt 7
Chemical analysis of
particulates in ambient air;
determination of thallium and
its inorganic compounds as part
of the dust precipitation by
atomic absorption
spectrometry
VDI
1988
26
VDI 2267 Blatt 8
Determination of suspended
particles in ambient air measurement of the mass
concentration of mercury sampling by sorption as
amalgam and determination by
atomic absorption
spectrometry (AAS) with cold
vapour technique
VDI 2267 Blatt 9
VDI
2000
VDI
2002
VDI
2000
VDI
1988
Determination of suspended
particulates matter in ambient
air - measurement of the mass
concentration of mercury sampling by sorption as
amalgam and determination by
atomic fluorescence
spectrometry (afs) with cold
vapour technique
VDI 2459 Blatt 1
Gaseous emission
measurement - determination
of carbon monoxide
concentration using flame
ionisation detection after
reduction to methane
VDI 3497 Blatt 3
Determination of particulate
anions in ambient air; analysis
of chloride, nitrate and sulfate
by ion chromatography using
suppressor technique after
aerosol sampling on ptfe-filters
27
VDI 3497 Blatt 4
Determination of particulate
anions in ambient air; analysis
of chloride, nitrate, and
sulphate by ion
chromatography using single
column technique after aerosol
sampling on ptfe-filters
VDI
1991
VDI 2100-1
Gaseous ambient air pollution
measurement - indoor air
pollution measurement - gas
chromatographic
determination of organic
compounds - fundamentals
VDI
2008
VDI 2100-2
Determination of gaseous
VDI
compounds in ambient air determination of indoor air
pollutants - gas
chromatographic
determination of organic
compounds - active sampling by
accumulation on activated
charcoal - solvent extraction
2010
VDI 2100-3
Determination of gaseous
VDI
compounds in ambient air determination of indoor air
pollutants - gas
chromatographic
determination of organic
compounds - active sampling by
accumulation on adsorbents thermal desorption
2011
28
VDI 2100-4
Gaseous ambient air
measurement - indoor air
pollution measurement - gas
chromatographic
determination of organic
compounds - calibration
procedures as a measure for
quality assurance
VDI
2003
VDI 2100-5
Determination of gaseous
compounds in ambient air determination of indoor air
pollutants - gas
chromatographic
determination of organic
compounds - determination of
volatile organic compounds,
especially ozone precursors
VDI
2007
VDI 2100-6
Determination of gaseous
compounds in ambient air determination of indoor air
pollutants - gas
chromatographic
determination of organic
compounds - practical
instructions for the
determination of the
measurement uncertainty
VDI
2010
3.1.2 Biological threats
Document
Number
Title
Organization
Status
ISO
2003
ISO and IEC Standards
ISO 10012
Measurement management
systems -Requirements for measurement
processes and measuring
equipment
29
ISO 10273
Microbiology of food and animal
feeding stuffs -- Horizontal
method for the detection of
presumptive pathogenic Yersinia
enterocolitica
ISO
2003
ISO 10381-1
Soil quality -- Sampling -- Part 1:
Guidance on the design of
sampling programmes
ISO
2002
ISO 10381-2
Soil quality -- Sampling -- Part 2:
Guidance on sampling techniques
ISO
2002
ISO 10381-3
Soil quality -- Sampling -- Part 3:
Guidance on safety
Soil quality -- Sampling -- Part 4:
Guidance on the procedure for
investigation of natural, nearnatural and cultivated sites
ISO
2001
ISO
2003
ISO 10498
Ambient air -- Determination of
sulfur dioxide -- Ultraviolet
fluorescence method
ISO
2004
ISO 10626
Equipment for crop protection -Sprayers -- Connecting
dimensions for nozzles with
bayonet fixing
ISO
1991
ISO 10704
Water quality - Measurement of
gross alpha and gross beta
activity in non-saline water - Thin
source deposit method
ISO
2009
ISO 10872
Water quality - Determination of
the toxic effect of sediment and
soil samples on growth, fertility
and reproduction of
Caenorhabditis elegans
(Nematoda)
ISO
2010
ISO 10381-4
30
ISO 11731-2
Water quality -- Detection and
enumeration of Legionella -- Part
2: Direct membrane filtration
method for waters with low
bacterial counts
ISO
2004
ISO 13440
Equipment for crop protection -Agricultural sprayers -Determination of the volume of
total residual
ISO
1996
ISO 139821/Amd
Protective clothing for use
against solid particulates - Part 1:
Performance requirements for
chemical protective clothing
providing protection to the full
body against airborne solid
particulates (type 5 clothing) Amendment 1
ISO
Amendment 1 2010
ISO 14000
Collection 1
ISO 14000 Collection 1
ISO
2001
ISO 14000
Collection 2
ISO 14000 Collection 2
ISO
2001
ISO 14131
Agricultural sprayers -- Boom
steadiness -- Test methods
ISO
2005
ISO 14710
Equipment for crop protection -Air-assisted sprayers -Dimensions of nozzle swivel nuts
ISO
1996
ISO 15141-1
Foodstuffs -- Determination of
ochratoxin A in cereals and cereal
products -- Part 1: High
performance liquid
chromatographic method with
silica gel clean up
ISO
1998
31
ISO 15141-2
Foodstuffs -- Determination of
ochratoxin A in cereals and cereal
products -- Part 2: High
performance liquid
chromatographic method with
bicarbonate clean up
ISO
1998
ISO 15859-10
Space systems -- Fluid
characteristics, sampling and test
methods -- Part 10: Water
ISO
2004
ISO 15859-13
Space systems -- Fluid
characteristics, sampling and test
methods -- Part 13: Breathing air
ISO
2004
ISO 16000-1
Indoor air -- Part 1: General
aspects of sampling strategy
ISO
2004
ISO 16000-2
Indoor air -- Part 2: Sampling
strategy for formaldehyde
ISO
2004
ISO 16017-1
Indoor, ambient and workplace
air -- Sampling and analysis of
volatile organic compounds by
sorbent tube/thermal
desorption/capillary gas
chromatography -- Part 1:
Pumped sampling
ISO
2000
ISO 16017-2
Indoor, ambient and workplace
air -- Sampling and analysis of
volatile organic compounds by
sorbent tube/thermal
desorption/capillary gas
chromatography -- Part 2:
Diffusive sampling
ISO
2003
32
ISO 16050
Foodstuffs -- Determination of
aflatoxin B1, and the total
content of aflatoxins B1, B2, G1
and G2 in cereals, nuts and
derived products -- Highperformance liquid
chromatographic method
ISO
2003
ISO 16200-1
Workplace air quality -- Sampling
and analysis of volatile organic
compounds by solvent
desorption/gas chromatography - Part 1: Pumped sampling
method
ISO
2001
ISO 16200-2
Workplace air quality -- Sampling
and analysis of volatile organic
compounds by solvent
desorption/gas chromatography - Part 2: Diffusive sampling
method
ISO
2000
ISO 16654
Microbiology of food and animal
feeding stuffs -- Horizontal
method for the detection of
Escherichia coli O157
ISO
2001
ISO 16654
Microbiology of food and animal
feeding stuffs -- Horizontal
method for the detection of
Escherichia coli O157
ISO
2001
ISO 17511
In vitro diagnostic medical
devices -- Measurement of
quantities in biological samples -Metrological traceability of values
assigned to calibrators and
control materials
ISO
2003
33
ISO 17734-1
Determination of organonitrogen
compounds in air using liquid
chromatography and mass
spectrometry -- Part 1:
Isocyanates using dibutylamine
derivatives
ISO
2006
ISO 17994
Water quality -- Criteria for
establishing equivalence between
microbiological methods
ISO
2004
ISO 18153
In vitro diagnostic medical
devices -- Measurement of
quantities in biological samples -Metrological traceability of values
for catalytic concentration of
enzymes assigned calibrators and
control materials
ISO
2003
ISO 19250
Water quality - Detection of
Salmonella spp.
ISO
2010
ISO 19458
Water quality - Sampling for
microbiological analysis
ISO
2006
ISO 19493
Water quality - Guidance on
marine biological surveys of hardsubstrate communities
ISO
2007
ISO 20665
Water quality - Determination of
chronic toxicity to Ceriodaphnia
dubia
ISO
2008
ISO 20666
Water quality - Determination of
the chronic toxicity to Brachionus
calyciflorus in 48 h
ISO
2008
34
ISO 20776-2
Clinical laboratory testing and in
vitro diagnostic test systems Susceptibility testing of infectious
agents and evaluation of
performance of antimicrobial
susceptibility test devices - Part 2:
Evaluation of performance of
antimicrobial susceptibility test
devices
ISO
2007
ISO 21338
Water quality - Kinetic
determination of the inhibitory
effects of sediment, other solids
and coloured samples on the light
emission of Vibrio fischeri (kinetic
luminescent bacteria test)
ISO
2010
ISO 21427-1
Water quality - Evaluation of
genotoxicity by measurement of
the induction of micronuclei Part 1: Evaluation of genotoxicity
using amphibian larvae
ISO
2006
ISO 21427-2
Water quality - Evaluation of
genotoxicity by measurement of
the induction of micronuclei Part 2: Mixed population method
using the cell line V79
ISO
2006
ISO 21528-1
Microbiology of food and animal
feeding stuffs -- Horizontal
methods for the detection and
enumeration of
Enterobacteriaceae -- Part 1:
Detection and enumeration by
MPN technique with preenrichment
ISO
2004
35
ISO 21567
Microbiology of food and animal
feeding stuffs -- Horizontal
method for the detection of
Shigella spp.
ISO
2004
ISO 22174
Microbiology of food and animal
feeding stuffs -- Polymerase chain
reaction (PCR) for the detection
of food-borne pathogens -General requirements and
definitions
ISO
2005
ISO 23611-3
Soil quality - Sampling of soil
invertebrates - Part 3: Sampling
and soil extraction of
enchytraeids
ISO
2007
ISO 27108
Water quality - Determination of
selected plant treatment agents
and biocide products - Method
using solid-phase microextraction
(SPME) followed by gas
chromatography-mass
spectrometry (GC-MS)
ISO
2010
ISO 29441
Water quality - Determination of
total nitrogen after UV digestion Method using flow analysis (CFA
and FIA) and spectrometric
detection
ISO
2010
ISO 3600
Tractors, machinery for
agriculture and forestry, powered
lawn and garden equipment -Operators manuals -- Content
and presentation
ISO
1996
ISO 4102
Equipment for crop protection -Sprayers -- Connection threading
ISO
1984
36
ISO 4831
Microbiology of food and animal
feeding stuffs - Horizontal
method for the detection and
enumeration of coliforms - Most
probable number technique
ISO
2006
ISO 5667-10
Water quality -- Sampling -- Part
10: Guidance on sampling of
waste waters
ISO
1992
ISO 5667-12
Water quality -- Sampling -- Part
12: Guidance on sampling of
bottom sediments
ISO
1995
ISO 5667-14
Water quality -- Sampling -- Part
14: Guidance on quality
assurance of environmental
water sampling and handling
ISO
1998
ISO 5667-15
Water quality - Sampling - Part
15: Guidance on the preservation
and handling of sludge and
sediment samples
ISO
2009
ISO 5667-16
Water quality -- Sampling -- Part
16: Guidance on biotesting of
samples
ISO
1998
ISO 5667-19
Water quality -- Sampling -- Part
19: Guidance on sampling of
marine sediments
ISO
2004
ISO 5667-4
Water quality -- Sampling -- Part
4: Guidance on sampling from
lakes, natural and man-made
ISO
1987
ISO 5667-5
Water quality -- Sampling -- Part
5: Guidance on sampling of
drinking water from treatment
works and piped distribution
systems
ISO
2006
37
ISO 5667-8
Water quality -- Sampling -- Part
8: Guidance on the sampling of
wet deposition
ISO
1993
ISO 5667-9
Water quality -- Sampling -- Part
9: Guidance on sampling from
marine waters
ISO
1992
ISO 5681
Equipment for crop protection -Vocabulary
ISO
1992
ISO 5682-1
Equipment for crop protection -Spraying equipment -- Part 1:
Test methods for sprayer nozzles
ISO
1996
ISO 5682-2
Equipment for crop protection -Spraying equipment -- Part 2:
Test methods for hydraulic
sprayers
ISO
1997
ISO 5682-3
Equipment for crop protection -Spraying equipment -- Part 3:
Test method for volume/hectare
adjustment systems of
agricultural hydraulic pressure
sprayers
ISO
1996
ISO 5815-2
Water quality -- Determination of
biochemical oxygen demand after
n days (BODn) -- Part 2: Method
for undiluted samples
ISO
2003
ISO 6686
Equipment for crop protection -Antidrip devices -- Determination
of performance
ISO
1995
38
ISO 6887-3
Microbiology of food and animal
feeding stuffs -- Preparation of
test samples, initial suspension
and decimal dilutions for
microbiological examination -Part 3: Specific rules for the
preparation of fish and fishery
products
ISO
2003
ISO 7002
Agricultural food products -Layout for a standard method of
sampling from a lot
ISO
1986
ISO 7410
Fertilizers and soil conditioners -Final samples -- Practical
arrangements
ISO
1983
ISO 7708
Air quality -- Particle size fraction
definitions for health-related
sampling
ISO
1995
ISO 8169
Equipment for crop protection -Sprayers -- Connecting
dimensions for nozzles and
manometers
ISO
1984
ISO 9308-1
Water quality -- Detection and
enumeration of Escherichia coli
and coliform bacteria -- Part 1:
Membrane filtration method
ISO
2000
ISO 9357
Equipment for crop protection -Agricultural sprayers -- Tank
nominal volume and filling hole
diameter
ISO
1990
ISO 9898
Equipment for crop protection -Test methods for air-assisted
sprayers for bush and tree crops
ISO
2000
39
ISO 19250
Water quality -- Determination of
Salmonella species
ISO
2010
ISO/TR 11905-2
Water quality -- Determination of
nitrogen -- Part 2: Determination
of bound nitrogen, after
combustion and oxidation to
nitrogen dioxide,
chemiluminescence detection
ISO
1997
ISO/TR 13843
Water quality -- Guidance on
validation of microbiological
methods
ISO
2000
ISO/TS 16489
Water quality -- Guidance for
establishing the equivalency of
results
ISO
2006
ISO/TS 20281
Water quality -- Guidance on
statistical interpretation of
ecotoxicity data
ISO
2006
ISO/TS 22475-2
Geotechnical investigation and
testing - Sampling methods and
groundwater measurements Part 2: Qualification criteria for
enterprises and personnel
ISO
2006
ISO/TS 12869
Water quality -- Detection and
quantification of Legionella
and/or Legionella pneumophila
by concentration and genic
amplification by polymerase
chain reaction (RT-PCR)
ISO
2012
Other Global Standards and
Guidelines
MOM1PE
Wastewater Sampling for Process
and Quality Control
WEF
1980
P0013PE
Hazardous Waste Site
Remediation Management
WEF
1990
P0014PE
Wastewater Biology: The
Microlife
WEF
1990
40
P0019PE
Biological Hazards at Wastewater
Treatment Facilities
WEF
1991
P0080PE
Hazardous Waste Site
Remediation: Assessment &
Characterization
WEF
1988
Regional and national
standards, guidelines and
regulations
ANSI/AAMI BF7
Blood transfusion micro-filters
AAMI
1989. Reapproved in 2002
T 146
Standard Method of Test for Wet
Preparation of Disturbed Soil
Samples for Test HM-22; Part IIA
R(2000)
AASHTO
1996. Reapproved in 2008
T 206
Standard Method of Test for
Penetration Test and Split-Barrel
Sampling of Soils ASTM
Designation D 1586-99
AASHTO
2009
T 233
Standard Method of Test for
Density of Soil In-Place by Block,
Chunk, or Core Sampling HM-22;
PART IIB
AASHTO
2002. Reapproved in 2010.
T 87
Standard Method of Test for Dry
Preparation of Disturbed Soil and
Soil Aggregate Samples for Test
HM-22; Part IIA
AASHTO
1986. Reapproved in 2000.
T301
()Standard Method of Test for
Elastic Recovery Test of
Bituminous Materials by Means
of a Ductilometer Twentieth
Edition
AASHTO
2013
0029
Air Sampling Instruments, 7th
Edition
ACGIH
1989
9044
LC 91-15752
Advances in Air Sampling
Groundwater Residue Sampling
Design
ACGIH
ACS
1988
1991
ANSI/ANS 6.3.1
Program for Testing Radiation
Shields in Light Water Reactors
(LWR)
ANS
1987. Reapproved in 2007
41
SMPR 2010.001
Standard Method Performance
Requirements for Polymerase
Chain Reaction (PCR) Methods for
Detection of Francisella tularensis
in Aerosol Collection Filters
and/or Liquids
AOAC
2011
SMPR 2010.002
Standard Method Performance
Requirements for Polymerase
Chain Reaction (PCR) Methods for
Detection of Yersinia pestis in
Aerosol Collection Filters and/or
Liquids
AOAC
2011
SMPR 2010.003
Standard Method Performance
Requirements for Polymerase
Chain Reaction (PCR) Methods for
Detection of Bacillus anthracis in
Aerosol Collection Filters and/or
Liquids
AOAC
2011
SMPR 2010.004
Standard Method Performance
Requirements for ImmunologicalBased Handheld Assays (HHAs)
for Detection of Bacillus anthracis
Spores in Visible Powders
AOAC
2011
SMPR 2010.005
Standard Method Performance
Requirements for ImmunologicalBased Handheld Assays (HHAs)
for Detection of Ricin in Visible
Powders
AOAC
2011
ASTM D1356
Standard Terminology Relating to
Sampling and Analysis of
Atmospheres
ASTM
2005. Reapproved in 2010
ASTM D3609
Standard Practice for Calibration
Techniques Using Permeation
Tubes
ASTM
2000. Reapproved in 2010
42
ASTM D4413
Standard Test Method for
Determination of Ethylene Oxide
in Workplace Atmospheres
(Charcoal Tube Methodology)
ASTM
1998. Reapproved in 2009
ASTM D4532
Standard Test Method for
Respirable Dust in Workplace
Atmospheres Using Cyclone
Samplers
ASTM
2010
ASTM D4599
Standard Practice for Measuring
the Concentration of Toxic Gases
or Vapors Using Length-of-Stain
Dosimeters
ASTM
2003. Reapproved in 2009
ASTM D4766
Standard Test Method for Vinyl
Chloride in Workplace
Atmospheres (Charcoal Tube
Method)
ASTM
1998. Reapproved in 2009
ASTM D5578
Standard Test Method for
Determination of Ethylene Oxide
in Workplace Atmospheres (HBr
Derivatization Method)
ASTM
2004. Reapproved in 2010
ASTM D5755
Standard Test Method for
Microvacuum Sampling and
Indirect Analysis of Dust by
Transmission Electron
Microscopy for Asbestos
Structure Number Surface
Loading
ASTM
2009
ASTM D5784
Standard Guide for Use of
Hollow-Stem Augers for
Geoenvironmental Exploration
and the Installation of Subsurface
Water-Quality Monitoring
Devices
ASTM
1995. Reapproved in 2006
43
ASTM D5872
Standard Guide for Use of Casing
Advancement Drilling Methods
for Geoenvironmental
Exploration and Installation of
Subsurface Water-Quality
Monitoring Devices
ASTM
1995. Reapproved in 2006
ASTM D5952
Standard Guide for the Inspection
of Water Systems for Legionella
and the Investigation of Possible
Outbreaks of Legionellosis
(Legionnaires' Disease or Pontiac
Fever)
ASTM
2008
ASTM D5953M
Standard Test Method for
Determination of Non-Methane
Organic Compounds (NMOC) in
Ambient Air Using Cryogenic
Preconcentration and Direct
Flame Ionization Detection
Method (Metric)
ASTM
1996. Reapproved in 2009
ASTM D6060
Standard Practice for Sampling of
Process Vents With a Portable
Gas Chromatograph
ASTM
1996. Reapproved in 2009
ASTM D6306
Standard Guide for Placement
and Use of Diffusion Controlled
Passive Monitors for Gaseous
Pollutants in Indoor Air
ASTM
2010
ASTM D6327
Standard Test Method for
Determination of Radon Decay
Product Concentration and
Working Level in Indoor
Atmospheres by Active Sampling
on a Filter
ASTM
2010
44
ASTM D6345
Standard Guide for Selection of
Methods for Active, Integrative
Sampling of Volatile Organic
Compounds in Air
ASTM
2010
ASTM D6363
Standard Test Method for
Determination of Hydrogen
Peroxide and Combined Organic
Peroxides in Atmospheric Water
Samples by Peroxidase Enzyme
Fluorescence Method
ASTM
1999. Reapproved in 2009
ASTM D6399
Standard Guide for Selecting
Instruments and Methods for
Measuring Air Quality In Aircraft
Cabins
ASTM
2010
ASTM D7035
Standard Test Method for
Determination of Metals and
Metalloids in Airborne Particulate
Matter by Inductively Coupled
Plasma Atomic Emission
Spectrometry (ICP-AES)
ASTM
2010
ASTM D7049
Standard Test Method for Metal
Removal Fluid Aerosol in
Workplace Atmospheres
ASTM
2004. Reapproved in 2010
ASTM D7391
Standard Test Method for
Categorization and Quantification
of Airborne Fungal Structures in
an Inertial Impaction Sample by
Optical Microscopy
ASTM
2009
ASTM D7520
Standard Test Method for
Determining the Opacity of a
Plume in the Outdoor Ambient
Atmosphere
ASTM
2009
45
ASTM E1688
Standard Guide for
Determination of the
Bioaccumulation of SedimentAssociated Contaminants by
Benthic Invertebrates
ASTM
2010
ASTM E2020
Standard Guide for Data and
Information Options for
Conducting an Ecological Risk
Assessment at Contaminated
Sites
ASTM
1999. Reapproved in 2010
ASTM E2325
Standard Guide for Nondestructive Examination of Paper
ASTM
2005
ASTM E2411
Standard Specification for
Chemical Warfare Vapor Detector
(CWVD)
ASTM
2007
ASTM E2414
Standard Test Method for
Quantitative Sporicidal ThreeStep Method (TSM) to Determine
Sporicidal Efficacy of Liquids,
Liquid Sprays, and Vapor or Gases
on Contaminated Carrier Surfaces
ASTM
2005
ASTM E2458
Standard Practices for Bulk
Sample Collection and Swab
Sample Collection of Visible
Powders Suspected of Being
Biological Agents from
Nonporous Surfaces
ASTM
2010
ASTM E2531
Standard Guide for Development
of Conceptual Site Models and
Remediation Strategies for Light
Nonaqueous-Phase Liquids
Released to the Subsurface
ASTM
2006
46
ASTM E2616
Standard Guide for Remedy
Selection Integrating Risk-Based
Corrective Action and Non-Risk
Considerations
ASTM
2009
ANSI/AWWA
C651
ANSI/AWWA
C653
Disinfecting Water Mains
AWWA
2005
Disinfection of Water Treatment
Plants
AWWA
2002
ANSI/AWWA
C654
ANSI/AWWA
G300
32.175M
Disinfection of Wells
AWWA
2003
Source Water Protection
AWWA
2007
Code of Practice for Sampling
Dairy Products Remplace 32-GP175M
CGSB
1989
DIN 10102
Microbiological analysis of meat
and meat products; detection of
clostridium botulinum and
botulinum toxin
DIN
1988
DIN 10115
Principles of detecting and
determining microorganisms in
foodstuffs using impedance
methods
DIN
1999
DIN 10120
Detecting Salmonella in
foodstuffs using impedance
methods
DIN
2001
DIN 10121
Detection of salmonella in
foodstuffs by enzyme-linked
fluorescent immunoassay
DIN
2000
DIN 10135
Method of detecting Salmonella
using the polymerase chain
reaction (PCR)
DIN
1999
47
DIN 10163-2
Microbiological examination of
meat and meat products;
determination of coagulasepositive staphylococci; by the
drop method
DIN
1985
DIN 10164-1
Microbiological examination of
meat and meat products;
determination of
Enterobacteriaceae by the
spatula method (reference
method)
DIN
1986
DIN 10164-2
Microbiological examination of
meat and meat products;
determination of
Enterobacteriaceae by the drop
method
DIN
1986
DIN 10167
Detection of Escherichia coli O
157 in meat and meat products
DIN
2004
DIN 1988-4
Drinking water supply systems;
drinking water protection and
drinking water quality control
(DVGW code of practice)
DIN
1988
DIN EN 12905
Products used for treatment of
water intended for human
consumption - Expanded
aluminosilicate
DIN
2006
DIN EN 12906
Products used for treatment of
water intended for human
consumption - Pumice
DIN
2006
DIN EN 12909
Products used for treatment of
water intended for human
consumption - Anthracite
DIN
2006
48
DIN EN 12910
Products used for treatment of
water intended for human
consumption - Garnet
DIN
2006
DIN EN 12912
Products used for treatment of
water intended for human
consumption - Barite
DIN
2006
DIN EN 12913
Products used for treatment of
water intended for human
consumption - Powdered
diatomaceous earth
DIN
2006
DIN EN 12914
Products used for treatment of
water intended for human
consumption - Powdered perlite
DIN
2006
ANSI/IEST/ISO
14644-8
Cleanrooms and associated
controlled environments - Part 8:
Classification of airborne
molecular contamination
IEST
2006
ANSI/ISA S71.04
Environmental Conditions for
Process Measurement and
Control Systems: Airborne
Contaminants
ISA
1985
JIS B 9918-1
Cleanrooms and associated
controlled environments -Biocontamination control -- Part
1: General principles and
methods
JSA
2008
JIS B 9918-2
Cleanrooms and associated
controlled environments -Biocontamination control -- Part
2: Evaluation and interpretation
of biocontamination data
JSA
2008
49
A 0080
Electrostatic Dust Sampler and
Measuring Method for Mass of
Airborne Dust by the Electrostatic
Dust Sampler
KSA
1982
A 0082
Low Volume Air Samplers and
Methods for Measuring Mass
Concentration of Airborne Dust
by the Low Volume Air Samplers
KSA
1993
F 2301
Practice for Preparing Disturbed
Soil Samples for Soil Testing
KSA
1995
F 2318
Methods for Penetration Test and KSA
Split-Barrel Sampling of Soils
1991
F 2319
Method for Soil Investigation and
Sampling by Auger Borings
KSA
1991
F 2341
Standard Methods for Wet
Preparation of Soil Samples for
Particle Size Analysis and
Determination of Soil Constants
KSA
1979
F 2348
Methods for Ring-Lined Barrel
Sampling of Soils
KSA
1978
K 0692
Testing Method for Antibacterial
Activity of Fabrics Agar Plate
Method (Halo Test)
KSA
1996
K 0693
Evaluation of Antibacterial
Finishes on Fabrics
KSA
2001
K 0890
Testing Method for Antibacterial
Activity Assessment of Textile
Materilas:Parallel Streak Method
KSA
2001
M 0104
Testing Methods for Specific
Resistivity Recovery
Characteristic of Water Filtered
by Membranes
KSA
1991
50
M 0105
Testing Methods for Determining
Bacterial Retention of Membrane
Filters
KSA
1996
M 0108
Sampling Methods for Industrial
Water and Industrial Wastewater
KSA
1998
M 0109
Sampling Methods for Pesticides
of Industrial Water and Waste
water
KSA
1998
M 0140
Testing Methods for Detection
and Estimation of MicroBiological Contaminants in Highly
Purified Water
KSA
1999
M 3405
Spray Polyvinyl Chloride Hose for
Agriculture Use (E)
KSA
1987
M 3412
Water Discharge Hose for
Agriculture
KSA
1994
M 9110
Water Quality-Sampling
(Guidance on the Design of
Sampling Programs)
KSA
1996
M 9111
Water Quality-Sampling
(Guidance on Sampling
Techniques)
KSA
1996
M 9112
Water Quality-Sampling
(Guidance on the Preservation
and Handling of Samples)
KSA
1996
M 9113
Water Quality-Sampling
(Guidance on Sampling from
Lakes, Natural and Man-Made
KSA
1996
M 9114
Water Quality-Sampling
(Guidance on Sampling of
Drinking Water and Water Used
for Food and Beverage
Processing)
KSA
1996
M 9115
Water Quality-Sampling
(Guidance on Sampling of Rivers
and Streams)
KSA
1996
51
M 9117
Water Quality-Sampling
(Guidance on the Sampling of
Wet Deposition)
KSA
1996
M 9118
Water Quality-Sampling
(Guidance on Sampling from
Marine Waters)
KSA
1996
M 9119
Water Quality-Sampling
(Guidance on Sampling of Waste
Waters)
KSA
1996
M 9120
Water Quality-Sampling
(Guidance on Sampling of
Groundwaters)
KSA
1996
M 9121
Water Quality-Sampling in Deep
Waters for Macro-Invertebrates
(Guidance on the Use of
Colonization, Qualitative and
Quantitative Samplers)
KSA
1996
M 9197
Water Quality - Sampling Part 13:
Guidance on Sampling of Sludges
from Sewage and Water Treatment Works
KSA
1998
M 9223
Water Quality - Determination of
the Inhibitory Effect of Water
Samples on the Light Emission of
Vibrio Fischer (Luminescent
Bacteria Test) - Part 2: Method
Using Liquid -
KSA
1999
M 9224
Water Quality - Determination of
the Inhibitory Effect of Water
Samples on the Light Emission of
Vibrio Fischer (Luminescent
Bacteria Test) - Part 2: Method
Using Freeze -
KSA
1999
52
M 9225
Water Quality - Sampling - Part
14: Guidance on Quality
Assurance of Environmental
Water Sampling and Handling
KSA
1999
M 9226
Water Quality - Sampling - Part
16: Guidance on Biotesting of
Samples
KSA
1999
M 9228
Water Quality - Detection and
Enumeration of Escherichia Coli
and Coliform Bacteria in Surface
and Waste Water - Part 3:
Miniaturized Method (Most
Probable Number) by
KSA
1999
M 9404
Air Quality-Particle Size Fraction
Definitions for Health-Related
Sampling
KSA
1996
M 9701
Soil Quality-Sampling (Guidance
on the Collection, Handling and
Storage of Soil for the
Assessment of Aerobic Microbial
Processes in the Laboratory)
KSA
1996
M 9702
Soil Quality-Pretreatment of
Samples for Physico-Chemical
Analyses
KSA
1996
M 9733
Soil Quality - Vocabulary - Part 2:
Terms and Definitions Relating to
Sampling
KSA
1999
AVP 38:
CHAPTER 1
Approval Procedures and
Responsibilities (07.81)
MODUK
1981
PN 407
Securing LP-Gas Air/Soil Samples
in Sampling Containers
NPGA
1988
PN 500
Safe Use of LP-Gas with Crop
Dryers
NPGA
1982
NSF/ANSI 61
Drinking water system
components - Health effects
NSF
2007
53
AS/NZS 4276.13
Water microbiology Pseudomonas aeruginosa Membrane filtration method
SAI
2008
1119
Methods of Test for Drinking and
Mineral Water - Part 3: NonRoutine Microbiological Tests
First Edition 1997-05-04
SASO
1995
407
Methods of Test for Drinking and
Mineral Water - Part (1):
Sampling Arabic Version
SASO
1989
514
Microbiological Methods of Food
Examination - Part 1: Preparation
Samples Arabic Version
SASO
1994
569
Microbiological - General
Guidance on Methods for the
Detection of Salmonella
SASO
1994
706
Methods of Test for Drinking and
Mineral Water - Third Part:
Routine Microbiological Tests
Arabic Version
SASO
1994
923
Test Methods for Organic
Fertilizers - Chemical,
Microbiological and Parasitical
Tests Arabic Version
SASO
1994
NZS 4402.5.1.3
Methods of Testing Soils for Civil
Engineering Purposes Part 5.1:
Soil Density Tests - Determination
of the Sensity of Soil Test 5.1.3:
Sampling Tube Method for the
Determination of the In Situ
Density
SNZ
1986
A-A-53663
COUNTING APPARATUS,
BACTERIAL COLONY
US DoD
1988. Notice 1 2012
54
A-A-54338
STERILIZATION TEST AMPULES,
BACTERIAL SPORE
US DoD
1991. Notice 1 2012
MIL-HDBK-1200
CHEMICAL AND BIOLOGICAL (CB)
AGENTS DETECTION AND
MONITORING SYSTEMS
US DoD
1992
MIL-HDBK-783
CHEMICAL AND BIOLOGICAL (CB)
CONTAMINATION AVOIDANCE
AND DECONTAMINATION
US DoD
1990
VDI 2090 Blatt 1
Messen von Immissionen Bestimmung der Deposition von
schwerfluechtigen organischen
Substanzen - Bestimmung der
PCDD/F-Deposition; BergerhoffProbenahme und GC/HRMSAnalyse
VDI
2001
VDI 2090 Blatt 2
Messen von Immissionen Bestimmung der Deposition von
schwerfluechtigen organischen
Substanzen - Bestimmung der
PCDD/F-Deposition; TrichterAdsorber-Probenahme und
GC/HRMS-Analyse
VDI
2002
VDI 2100 Blatt 2
Messen gasfoermiger
Verbindungen in der Aussenluft;
Messen von
Innenraumluftverunreinigungen Gaschromatographische
Bestimmung organischer
Verbindungen - Aktive
Probenahme durch Anreicherung
auf Aktivkohle;
Loesemittelextraktion
VDI
2010
55
VDI 2267 Blatt 8
Stoffbestimmung an Partikeln in
der Aussenluft - Messen der
Massenkonzentration von
Quecksilber - Probenahme durch
Sorption als Amalgam und
Bestimmung mittels
Atomabsorptionsspektrometrie
(AAS) mit Kaltdampftechnik
VDI
2000
VDI 2267 Blatt 9
Stoffbestimmung an Partikeln in
der Aussenluft - Messen der
Massenkonzentration von
Quecksilber - Probenahme durch
Sorption als Amalgam und
Bestimmung mittels
Atomfluoreszenzspektrometrie
(AFS) mit Kaltdampftechnik
VDI
2002
VDI 2459 Blatt 1
Messen gasfoermiger Emissionen
- Messen der KohlenmonoxidKonzentration mittels
Flammenionisationsdetektor
nach Reduktion zu Methan
VDI
2000
VDI 3865 Blatt 2
Messen organischer
Bodenverunreinigungen Techniken fuer die aktive
Entnahme von Bodenluftproben
VDI
1998
VDI 3870 Blatt 2
Messen von Regeninhaltsstoffen - VDI
Probenahme von Regenwasser Sammelgeraet ARS 721
1998
56
VDI 3957 Blatt 1
Biologische Messverfahren zur
Ermittlung und Beurteilung der
Wirkung von
Luftverunreinigungen auf
Pflanzen (Bioindikation) Grundlagen und Zielsetzung
VDI
1999
VDI 3957 Blatt 3
Biologische Messverfahren zur
Ermittlung und Beurteilung der
Wirkung von
Luftverunreinigungen auf
Pflanzen (Bioindikation) Verfahren der standardisierten
Exposition von Gruenkohl
VDI
2008
VDI 3957 Blatt 5
Biologische Messverfahren zur
Ermittlung und Beurteilung der
Wirkung von
Luftverunreinigungen auf
Pflanzen (Bioindikation) - Das
Fichten-Expositionsverfahren
VDI
2001
3.1.3 Radiological/Nuclear threats
Document
Number
Title
Organization
Status
ISO and ISO/IEC standards
ISO 11665-8
ISO 11704
Measurement of radioactivity in ISO
the environment - Air: radon222 - Part 8: Methodologies for
initial and additional
investigations in buildings
Water quality - Measurement of ISO
gross alpha and beta activity
concentration in non-saline
water - Liquid scintillation
counting method
2012
2010
57
ISO 11929
ISO 12794
ISO 12807
ISO 13464
ISO 14146
ISO 14850-1
ISO 15382
ISO 17874-1
ISO 17874-2
Determination of the
characteristic limits (decision
threshold, detection limit and
limits of the confidence
interval) for measurements of
ionizing radiation Fundamentals and application
Nuclear energy -- Radiation
protection -- Individual
thermoluminescence
dosemeters for extremities and
eyes
Safe transport of radioactive
materials -- Leakage testing on
packages
Simultaneous determination of
uranium and plutonium in
dissolver solutions from
reprocessing plants -- Combined
method using K-absorption
edge and X-ray fluorescence
spectrometry
Radiation protection -- Criteria
and performance limits for the
periodic evaluation of
processors of personal
dosemeters for X and gamma
radiation
Nuclear energy -- Wastepackages activity measurement
-- Part 1: High-resolution
gamma spectrometry in integral
mode with open geometry
Nuclear energy -Radiationprotection -Procedure for radiation
protection monitoring in
nuclear installations for external
exposure to weakly penetrating
radiation, especially to beta
radiation
Remote handling devices for
radioactive materials - Part 1:
General requirements
Remote-handling devices for
radioactive materials -- Part 2:
Mechanical master-slave
ISO
2010
ISO
2000
ISO
1996
ISO
1998
ISO
2000
ISO
2004
ISO
2002
ISO
2010
ISO
2004
58
manipulators
ISO 17874-4
ISO 17874-5
ISO 18412
ISO 18589-2
ISO 18589-3
ISO 20553
ISO 21238
ISO 21243
ISO 21482
ISO 21909
Remote handling devices for
radioactive materials -- Part 4:
Power manipulators
Remote handling devices for
radioactive materials - Part 5:
Remote handling tongs
Water quality -- Determination
of chromium(VI) -- Photometric
method for weakly
contaminated water
Measurement of radioactivity in
the environment - Soil - Part 2:
Guidance for the selection of
the sampling strategy, sampling
and pre-treatment of samples
Measurement of radioactivity in
the environment - Soil - Part 3:
Measurement of gammaemitting radionuclides
Radiation protection -Monitoring of workers
occupationally exposed to a risk
of internal contamination with
radioactive material
Nuclear energy - Nuclear fuel
technology - Scaling factor
method to determine the
radioactivity of low- and
intermediate-level radioactive
waste packages generated at
nuclear power plants
Radiation protection Performance criteria for
laboratories performing
cytogenetic triage for
assessment of mass casualties
in radiological or nuclear
emergencies - General
principles and application to
dicentric assay
Ionizing-radiation warning Supplementary symbol
Passive personal neutron
dosemeters -- Performance and
ISO
2006
ISO
2007
ISO
2005
ISO
2007
ISO
2007
ISO
2006
ISO
2007
ISO
2008
ISO
2007
ISO
2005
59
test requirements
ISO 22188
ISO 26802
ISO 27048
ISO 27467
ISO 2889
ISO 29661
ISO 361
ISO 3925
ISO 3999
ISO 4037-1
ISO 4037-2
Monitoring for inadvertent
movement and illicit trafficking
of radioactive material
Nuclear facilities - Criteria for
the design and the operation of
containment and ventilation
systems for nuclear reactors
Radiation protection - Dose
assessment for the monitoring
of workers for internal radiation
exposure
Nuclear criticality safety Analysis of a postulated
criticality accident
Sampling airborne radioactive
materials from the stacks and
ducts of nuclear facilities
Reference radiation fields for
radiation protection Definitions and fundamental
concepts
Basic ionizing radiation symbol
Unsealed radioactive
substances -- Identification and
certification
Radiation protection -Apparatus for industrial gamma
radiography -- Specifications for
performance, design and tests
X and gamma reference
radiation for calibrating
dosemeters and doserate
meters and for determining
their response as a function of
photon energy -- Part 1:
Radiation characteristics and
production methods
X and gamma reference
radiation for calibrating
dosemeters and doserate
meters and for determining
their response as a function of
photon energy -- Part 2:
Dosimetry for radiation
protection over the energy
ISO
2004
ISO
2010
ISO
2011
ISO
2009
ISO
2010
ISO
2012
ISO
ISO
1975
1978
ISO
2004
ISO
1996
ISO
1997
60
ranges from 8 keV to 1,3 MeV
and 4 MeV to 9 MeV
ISO 4037-3
ISO 4037-4
ISO 6980-3
ISO 7205
ISO 7212
ISO 7503-1
ISO 7503-2
X and gamma reference
radiation for calibrating
dosemeters and doserate
meters and for determining
their response as a function of
photon energy -- Part 3:
Calibration of area and personal
dosemeters and the
measurement of their response
as a function of energy and
angle of incidence
X and gamma reference
radiation for calibrating
dosemeters and doserate
meters and for determining
their response as a function of
photon energy -- Part 4:
Calibration of area and personal
dosemeters in low energy X
reference radiation fields
Nuclear energy - Reference
beta-particle radiation - Part 3:
Calibration of area and personal
dosemeters and the
determination of their response
as a function of beta radiation
energy and angle of incidence
Radionuclide gauges -- Gauges
designed for permanent
installation
Enclosures for protection
against ionizing radiation -Lead shielding units for 50 mm
and 100 mm thick walls
Evaluation of surface
contamination -- Part 1: Betaemitters (maximum beta energy
greater than 0,15 MeV) and
alpha-emitters
Evaluation of surface
contamination -- Part 2: Tritium
ISO
1999
ISO
2004
ISO
2006
ISO
1986
ISO
1986
ISO
1988
ISO
1988
61
surface contamination
ISO 7503-3
ISO 8194
ISO 8690
ISO 9005
ISO 9271
ISO 9978
ISO 11665-8
ISO 27048
ISO 28218
Evaluation of surface
contamination -- Part 3:
Isomeric transition and electron
capture emitters, low energy
beta-emitters (E btamax less
than 0,15 MeV)
Radiation protection -- Clothing
for protection against
radioactive contamination -Design, selection, testing and
use
Decontamination of
radioactively contaminated
surfaces -- Method for testing
and assessing the ease of
decontamination
Nuclear energy - Uranium
dioxide powder and sintered
pellets - Determination of
oxygen/uranium atomic ratio by
the amperometric method
Decontamination of
radioactively contaminated
surfaces -- Testing of
decontamination agents for
textiles
Radiation protection -- Sealed
radioactive sources -- Leakage
test methods
Measurement of radioactivity in
the environment -- Air -- Part 8:
Radon-222 in buildings:
Methodologies for screening
and additional investigations
Radiation protection -- Dose
assessment for the monitoring
of workers for internal radiation
exposure
Radiation protection -Performance criteria for
radiobioassay
ISO
1996
ISO
1987
ISO
1988
ISO
2007
ISO
1992
ISO
1992
ISO
2012
ISO
2011
ISO
2010
Other Global Standards and
Guidelines
62
GSG-1
Classification of Radioactive
Waste
IAEA
2009
NS-R-4
Safety of Research Reactors
IAEA
2005
GS-R-3
The Management System for
Facilities and Activities
IAEA
2006
GS-G-3.1
Application of the Management
System for Facilities and
Activities
IAEA
2006
GS-G-3.5
The Management System for
Nuclear Installations
IAEA
2008
NS-R-3
Site Evaluation for Nuclear
Installations
IAEA
2003
SSG-18
Meteorological and
Hydrological Hazards in Site
Evaluation for Nuclear
Installations
IAEA
2011
SSG-2
Deterministic Safety Analysis for IAEA
Nuclear Power Plants
2009
NS-G-1.10
Design of Reactor Containment
Systems for Nuclear Power
Plants
IAEA
2004
NS-G-1.9
Design of the Reactor Coolant
System and Associated Systems
in Nuclear Power Plants
IAEA
2004
NS-G-1.12
Design of the Reactor Core for
Nuclear Power Plants
IAEA
2005
NS-G-1.6
Seismic Design and
Qualification for Nuclear Power
Plants
IAEA
2003
NS-G-1.7
Protection Against Internal Fires
and Explosions in the Design of
Nuclear Power Plants
IAEA
2004
63
NS-G-1.3
Instrumentation and Control
Systems Important to Safety in
Nuclear Power Plants
IAEA
2002
NS-G-1.11
Protection against Internal
Hazards other than Fires and
Explosions in the Design of
Nuclear Power Plants
IAEA
2004
NS-G-1.5
External Events Excluding
Earthquakes in the Design of
Nuclear Power Plants
IAEA
2003
NS-G-1.9
Design of the Reactor Coolant
System and Associated Systems
in Nuclear Power Plants
IAEA
2004
NS-G-1.8
Design of Emergency Power
Systems for Nuclear Power
Plants
IAEA
2004
NS-G-1.3
Instrumentation and Control
Systems Important to Safety in
Nuclear Power Plants
IAEA
2002
NS-G-1.13
Radiation Protection Aspects of
Design for Nuclear Power Plants
IAEA
2005
GS-G-1.2
Review and Assessment of
Nuclear Facilities by the
Regulatory Body
IAEA
2002
GS-G-1.3
Regulatory Inspection of
Nuclear Facilities and
Enforcement by the Regulatory
Body
IAEA
2002
SSG-12
Licensing Process for Nuclear
Installations
IAEA
2010
GS-G-1.4
Documentation for Use in
Regulating Nuclear Facilities
IAEA
2002
64
NS-G-2.4
Recruitment, Qualification and
Training of Personnel for
Nuclear Power Plants
IAEA
2002
NS-G-2.6
Maintenance, Surveillance and
In-Service Inspection in Nuclear
Power Plants
IAEA
2002
NS-G-2.2
Operational Limits and
Conditions and Operating
Procedures for Nuclear Power
Plants
IAEA
2000
NS-G-2.9
Commissioning for Nuclear
Power Plants
IAEA
2003
NS-G-2.7
Radiation Protection and
Radioactive Waste
Management in the Operation
of Nuclear Power Plants
IAEA
2002
GS-G-2.1
Arrangements for Preparedness
for a Nuclear or Radiological
Emergency
IAEA
2007
NS-G-2.6
Maintenance, Surveillance and
In-Service Inspection in Nuclear
Power Plants
IAEA
2002
NS-G-2.4
The Operating Organization for
Nuclear Power Plants
IAEA
2001
SSG-9
Seismic Hazards in Site
Evaluation for Nuclear
Installations
IAEA
2010
SSG-18
Meteorological and
Hydrological Hazards in Site
Evaluation for Nuclear
Installations
IAEA
2011
NS-G-3.2
Dispersion of Radioactive
Material in Air and Water and
Consideration of Population
Distribution in Site Evaluation
for Nuclear Power Plants
IAEA
2002
65
NS-G-3.1
External Human Induced Events
in Site Evaluation for Nuclear
Power Plants
IAEA
2002
NS-G-3.2
Dispersion of Radioactive
Material in Air and Water and
Consideration of Population
Distribution in Site Evaluation
for Nuclear Power Plants
IAEA
2002
NS-G-3.6
Geotechnical Aspects of Site
Evaluation and Foundations for
Nuclear Power Plants
IAEA
2004
NS-R-3
Site Evaluation for Nuclear
Installations
IAEA
2003
GS-R-1
Legal and Governmental
Infrastructure for Nuclear,
Radiation, Radioactive Waste
and Transport Safety
IAEA
2010
NS-G-1.1
Software for Computer Based
Systems Important to Safety in
Nuclear Power Plants
Safety Assessment for
Facilities and Activities
Development and Application
of Level 1 Probabilistic Safety
Assessment for Nuclear Power
Plants
Development and Application
of Level 2 Probabilistic Safety
Assessment for Nuclear Power
Plants
Instrumentation and Control
Systems Important to Safety in
Nuclear Power Plants
Fire Safety in the Operation of
Nuclear Power Plants
Safety of Nuclear Power Plants:
Design
Safety of Nuclear Power Plants:
Commissioning and Operation
Occupational Radiation
Protection
IAEA
Under revision
IAEA
2009
IAEA
2010
IAEA
2010
IAEA
2002. Under revision
IAEA
2000
IAEA
2010
IAEA
2010
IAEA
1999
GS-R-4
SSG-3
SSG-4
NS-G-1.3
NS-G-2.1
SSR-2/1
SSR-2/2
RS-G-1.1
66
RS-G-1.2
RS-G-1.5
SSG-23
REPORT 13
REPORT 20
REPORT 27
REPORT 32
REPORT 40
REPORT 45
REPORT 46D
STANAG 3830 ED
1 AMD 4
STANAG 3830 ED
1 AMD 5
STANAG 3830 ED
1 AMD 6
STANAG 3830 ED
1 AMD 7
STANAG 4328 ED
2
Assessment of Occupational
Exposure Due to Intakes of
Radionuclides
Radiological Protection for
Medical Exposure to Ionizing
Radiation
IAEA
1992
IAEA
2002
The Safety Case and Safety
Assessment for the Disposal of
Radioactive Waste
Neutron Fluence, Neutron
Spectra and Kerma
Radiation Protection
Instrumentation and Its
Application
An International Neutron
Dosimetry Intercomparison
Methods of Assessment of
Absorbed Dose in Clinical Use of
Radionuclides
Quality Factor in Radiation
Protection
Clinical Neutron Dosimetry Part 1: Determination of
Absorbed Dose in a Patient
Treated by External Beams of
Fast Neutrons
Photon, Electron, Proton and
Neutron Interaction Data for
Body Tissues, with Data Disk
IAEA
2012
ICRU
2007
ICRU
1971
ICRU
1978
ICRU
2007
ICRU
1986
ICRU
1989
ICRU
1992
Aircrew Nuclear Flash Blindness
Protection
Aircrew Nuclear Flash Blindness
Protection
Aircrew Nuclear Flash Blindness
Protection Amendment 6,
3/9/95
Aircrew Nuclear Flash Blindness
Protection Amendment 7,
7/8/97
Guidelines for the Armored
Fighting Vehicles Designer to
Improve Nuclear Radiation
Protection - AEP-14
NATO
1988
NATO
1991
NATO
1995
NATO
Published in1997
NATO
2007
Regional and national
standards, guidelines and
regulations
67
ANSI/ANS 58.3
ANSI/ANS 6.3.1
ANSI/ANS 6.6.1
ANSI/ANS 2.27
ANSI/ANS 8.1
ANSI/ANS 15.1
ANSI/ANS 15.16
ANSI/ASME
NQA-1
ANSI/ASME OMS/G
ANSI/ASME RA-S
ASTM D7282
ASTM D7316
ASTM E2601
ASTM E2731
Physical Protection for Nuclear
Safety-Related Systems and
Components
Program for Testing Radiation
Shields in Light Water Reactors
(LWR)
Calculation and Measurement
of Direct and Scattered Gamma
Radiation from LWR Nuclear
Power Plants,
Criteria for Investigations of
Nuclear Facility Sites for Seismic
Hazard Assessments
Nuclear Criticality Safety in
Operations with Fissionable
Materials Outside Reactors
The Development of Technical
Specifications for Research
Reactors
Emergency Planning for
Research Reactors
Quality Assurance
Requirements for Nuclear
Facility Applications
Standards and Guides for
Operation and Maintenance of
Nuclear Power Plants
Probabilistic Risk Assessment
for Nuclear Power Plant
Applications
Standard Practice for Set-up,
Calibration, and Quality Control
of Instruments Used for
Radioactivity Measurements
Standard Guide for
Interpretation of Existing Field
Instrumentation to Influence
Emergency Response Decisions
Standard Practice for
Radiological Emergency
Response
Standard Specification for
Materials to Mitigate the
Spread of Radioactive
Contamination after a
Radiological Dispersion Event
ANS
1992. Reapproved in 2008
ANS
1987. Reapproved in 2007.
ANS
1987. Reapproved in 2007
ANS
2008
ANS
1998. Reapproved in 2007
ANS
2007
ANS
2008
ASME
2008
ASME
2007
ASME
2002
ASTM
2006
ASTM
2006
ASTM
2008
ASTM
2009
68
BS IEC 62244
BS IEC 62463
CSA N290.14
CSA N291
CSA N287.2
CSA N287.7
CSA N289.1
301
338
379
692
Radiation protection
instrumentation. Installed
radiation monitors for the
detection of radioactive and
special nuclear materials at
national borders
Radiation protection
instrumentation. X-ray systems
for the screening of persons for
security and the carrying of
illicit items
Qualification of Pre-Developed
Software for Use in SafetyRelated Instrumentation and
Control Applications in Nuclear
Power Plants
Requirements for SafetyRelated Structures for CANDU
Nuclear Power Plants
Material Requirements for
Concrete Containment
Structures for CANDU Nuclear
Power Plants
In-service examination and
testing requirements for
concrete containment
structures for CANDU nuclear
power plants
General requirements for
seismic design and qualification
of CANDU nuclear power plants
IEEE Standard Test Procedures
for Amplifiers and Preamplifiers
used with Detectors of Ionizing
Radiation
IEEE Standard Criteria for the
Periodic Surveillance Testing of
Nuclear Power Generating
Station Safety Systems
IEEE Standard Application of the
Single-Failure Criterion to
Nuclear Power Generating
Station Safety Systems
IEEE Standard Criteria for
Security Systems for Nuclear
Power Generating Stations
BSI
2006
BSI
2010
CSA
2007
CSA
2008
CSA
2008
CSA
2008
CSA
2008
IEEE
1988
IEEE
1987
IEEE
2000
IEEE
1997
69
ANSI N42.13
Calibration and Usage of "Dose
Calibrator" IonizationChambers
for the Assay of Radionuclides
IEEE
2004
ANSI N42.14
Calibration and Use of
Germanium Spectrometers for
the Measurement of GammaRay Emission Rates of
Radionuclides
Specification and Performance
of On-Site Instrumentation for
Continuously Monitoring
Radioactivity in Effluents
Measurement Procedures for
Resolution and Efficiency of
Wide-Bandgap Semiconductor
Detectors of Ionizing Radiation
Criteria for Alarming Personal
Radiation Detectors for
Homeland Security
American National Standard for
Portable Radiation Detection
Instrumentation for Homeland
Security
Performance Criteria for Handheld Instruments for the
Detection and Identification of
Radionuclides
American National Standard for
Evaluation and Performance of
Radiation Detection Portal
Monitors for Use in Homeland
Security
American National Standard for
Training Requirements for
Homeland Security Purposes
Using Radiation Detection
Instrumentation for Interdiction
and Prevention
American National Standard
Performance Criteria for
Spectroscopy-Based Portal
Monitors Used for Homeland
Security
American National Standard
Data Format Standard for
Radiation Detectors Used for
Homeland Security
IEEE
1999
IEEE
2004
IEEE
2003
IEEE
2006
IEEE
2006
IEEE
2003
IEEE
2006
IEEE
2006
IEEE
2006
IEEE
2006
ANSI N42.18
ANSI N42.31
ANSI N42.32
ANSI N42.33
ANSI N42.34
ANSI N42.35
ANSI N42.37
ANSI N42.38
ANSI N42.42
70
C37.105
IEEE N323c
IEEE Std 577
IEEE Std N42.43
IEEE Std N42.48
N323a
ANSI N42.12
ANSI/ISA S67.01
ANSI/ISA
S67.02.01
ANSI/ISA
67.04.01
A 4031
A 4052
A 4053
IEEE Standard for Qualifying
Class 1E Protective Relays and
Auxiliaries for Nuclear Power
Generating Stations
Radiation Protection
Instrumentation Test and
Calibration - Air Monitoring
Instruments
Standard Requirements for
Reliability Analysis in the Design
and Operation of Safety
Systems for Nuclear Facilities
American National Standard
Performance Criteria for Mobile
and Transportable Radiation
Monitors used for Homeland
Security
American National Standard
Performance Requirements for
Spectroscopic Personal
Radiation Detectors (SPRDs) for
Homeland Security
Radiation Protection
Instrumentation Test and
Calibration
American National Standard
Calibration and Usage of
Thallium-Activated Sodium
Iodide Detector Systems for
Assay of Radionuclides
Transducer and Transmitter
Installation for Nuclear Safety
Applications
Nuclear-Safety-Related
Instrument Sensing Line Piping
and Tubing Standard for Use in
Nuclear Power Plants
Setpoints for Nuclear SafetyRelated Instrumentation
Stabilized D.C. High-Voltage
Supplies for Radiation Detection
Instruments
Protective Rubber Gloves for
Radioactive Contamination
Protective Clothing for
Radioactive Contamination
IEEE
1987
IEEE
2009
IEEE
2004
IEEE
2006
IEEE
2008
IEEE
1997
IEEE
1994
ISA
1994
ISA
1999
ISA
2000
KSA
1990
KSA
1990
KSA
1990
71
A 4321
A 4442
A 4801
C 6702
M 0140
GB/T 17680.10
Thallium-Activated Sodium
Iodide Scintillator for Radiation
Detection
Monitors for Gamma Emitting
Radionuclides in Water
Protective Footwear for
Radioactive Contamination
Radiation Safety Standards for
Laser Products
Testing Methods for Detection
and Estimation of MicroBiological Contaminants in
Highly Purified Water
Criteria for emergency planning
and preparedness of nuclear
power plants--Criteria for
emergency radiological field
monitoring,sampling and
analysis conducted by nuclear
power plant operating
organizations
KSA
2001
KSA
1991
KSA
1982
KSA
1995
KSA
1999
SPC
2003
3.1.4 Explosives threats
Document Number
Title
ISO and ISO/IEC standards
Organization
Status
IEC 60079-20-1
Explosive atmospheres - part 20-1:
material characteristics for gas and
vapour classification - test
methods and data
Electrical apparatus for explosive
gas atmospheres. Part 12:
Classification of mixtures of gases
or vapours with air according to
their maximum experimental safe
gaps and minimum igniting
currents
Explosive atmospheres - Part 29-2:
Gas detectors - Selection,
installation, use and maintenance
of detectors for flammable gases
and oxygen
IEC
2010. Corrigendum
1 2012.
IEC
2007
IEC
2007
Explosive atmospheres - Part 31:
Equipment dust ignition
protection by enclosure "t"
IEC
2008. Corrigendum
1 2009.
IEC 60079-12 TR Ed. 1.0
IEC 60079-29-2 Ed. 2.0
IEC 60079-31 Ed. 1.0
72
ISO 10807:1994
Pipework -- Corrugated flexible
metallic hose assemblies for the
protection of electrical cables in
explosive atmospheres
ISO
1994
ISO 13702:1999
Petroleum and natural gas
ISO
industries -- Control and mitigation
of fires and explosions on offshore
production installations -Requirements and guidelines
1999
ISO 13985:2006
Liquid hydrogen - Land vehicle fuel
tanks
Explosion protection systems -Part 1: Determination of explosion
indices of combustible dusts in air
Explosion protection systems -Part 2: Determination of explosion
indices of combustible gases in air
Explosion protection systems -Part 3: Determination of explosion
indices of fuel/air mixtures other
than dust/air and gas/air mixtures
ISO
2006
ISO
1985
ISO
1985
ISO
1985
Explosion protection systems -Part 4: Determination of efficacy
of explosion suppression systems
Coating powders -- Part 4:
Calculation of lower explosion
limit
Fire protection -- Vocabulary -Part 7: Explosion detection and
suppression means
ISO
1985
ISO
1992
ISO
1987
ISO 6184-1:1985
ISO 6184-2:1985
ISO 6184-3:1985
ISO 6184-4:1985
ISO 8130-4:1992
ISO 8421-7:1987
Other Global Standards and
Guidelines
9571
Convention on the Marking of
Plastic Explosives for the Purpose
of Detection Done at Montreal on
1 March 1991; Reprinted: 08/1994
ICAO
2007
9801- CD
International Conference on Air
Law (Convention on the Marketing
of Plastic Explosives for the
Purpose of Detection) Volume II Documents; Montreal, 12
February - 1 March 1991
ICAO
2005
73
PUBL 4
Warnings and Instructions for
Consumers in Transporting,
Storing, Handling and Using
Explosive Materials
IME
2009
SLP 12
Glossary of Commercial Explosives
Industry Terms
Handbook for the Transportation
and Distribution of Explosive
Materials
Safety in the Transportation,
Storage, Handling and Use of
Explosive Materials
IME
2013
IME
2013
IME
2011
SLP 21
IME Guidance on the Destruction
of Commercial Explosive Materials
Under the U.S. Environmental
Protection Agency's Immediate
Response Exception
IME
2011
SLP 22
Recommendations for the Safe
Transportation of Detonators in
the Same Vehicle with Certain
Other Explosive Materials and
Guide for the Use of IME 22
Container (2/93)
IME
2011
AOP 43
Electro-explosive devices
assessment and test methods for
characterization. Guidelines for
STANAG 4560
NATO
2004
AOP 38
(Active/Historical)Glossary of
Terms and Definitions Concerning
the Safety and Suitability for
Service of Munitions, Explosives
and Related Products
NATO
2009
AOP 38 ED 3
Glossary of Terms and Definitions
NATO
Concerning the Safety and
Suitability for Service of Munitions,
Explosives and Related Products
Published in
AEP 34 ED 1
Nato Army Armaments Group
Land Group 4 on Surface-toSurface Artillery (LG/4) Sub-Group
2 on Accuracy, Ballistics and
Explosives (SG/2) Measurement of
Projectile Velocities
1999
SLP 14
SLP 17
NATO
74
AOP 21 ED 2
Fuzing Systems: Manual of
Development Characterization and
Safety Test Methods and
Procedures for Lead and Booster
Explosive Components
NATO
2002
AOP 7 ED2 Rev 2
Manual of Tests for the
Qualification of Explosive
Materials for Military Use
NATO
2006.
AOP-7
ANNEXIVOLIISEC102.01
Description of Tests Used for the
Qualification and Documentation
of Explosive Materials for Military
Use Volume II Section 102.01
Physical (Including Mechanical)
Properties Tests Section
NATO
1993
AEODP-3 Vol. 1 and Vol. 2
Interservice improvised explosive
device disposal operations on
multinational deployments - a
guide for staff officers
Underwater munition disposal
procedures - miscellaneous
underwater explosive ordnance
NATO
2010
NATO
2000
STANAG 1397 ED 3
RADHAZ Classification of
Munitions and Weapon Systems
Embodying Electro-Explosive
Devices
NATO
2011
STANAG 2143 ED 5
Explosive ordnance
reconnaissance/explosive
ordnance disposal (eor/eod)
NATO
2005
STANAG 2221 ED 2
Explosive Ordnance Disposal
Reports and Messages -
NATO
2008
STANAG 2370 ED 1 AMD 1
Principles of Improvised Explosive
Device Disposal
NATO
1987. Amendment
1 1989.
STANAG 2389 ED3
Minimum Standards of Proficiency
for Trained Explosive Ordnance
Disposal Personnel
NATO
2013
AEODP-01 (A) VOL V
75
STANAG 2391 ED 2 AMD 0
Explosive Ordnance Disposal
Recovery Operations on Fixed
Installations - AEODP-5
NATO
2010
STANAG 2834 ED 4
Operation of the Explosive
Ordnance Disposal Technical
Information Centre (EODTIC)
NATO
2009
STANAG 2890 ED 2 AMD 2
Regulations for Safety in the
Transport of Ammunition and
Explosives by Military Train
R(1991)
NATO
1988. Amendment
2 1991.
STANAG 2933 ED 3
(Active/Historical)Land Forces
Explosives and Demolition
Accessories Interchangeability
Catalogue in Wartime - AOP-19(B)
NATO
1997
STANAG 2933 ED 3 AMD 1
(Active/Historical)Land forces
Explosives and Demolition
Accessories Interchangeability
Catalogue in Wartime - AOP-19
Amendment 1, 06/24/1999
NATO
1991
STANAG 2933 ED 3 AMD 2
Land forces Explosives and
Demolition Accessories
Interchangeability Catalogue in
Wartime - AOP-19 Amendment 2
09/20/2000
NATO
2000
STANAG 4024 ED 3
Specification for Ammonium
NATO
Nitrate Crystal and Prill-Type A and
Type B (for Use in Explosives) for
Deliveries from One NATO Nation
to Another
2006
STANAG 4117
Explosives, Stability Test
Procedures and Requirements for
Propellants Stabilized with
Diphenylamine, Ethyl Centralite or
Mixtures of Both
NATO
1998
STANAG 4123
Determination of the Classification
of Military Ammunition and
Explosives
NATO
1995
STANAG 4137 ED 1AMD 5
CLASSIFIED) Standard Underwater
Explosion Test for Operational
Surface Ships and Crafts
NATO
1980
76
STANAG 4137 ED 1 AMD 6
(CLASSIFIED) Standard Underwater
Explosion Test for Operational
Surface Ships and Crafts
Amendment 6 04/18/90
NATO
1990
STANAG 4147 ED 2
Chemical Compatibility of
Ammunition Components with
Explosives (Non-Nuclear
Applications)
NATO
2011
STANAG 4170
Principles and Methodology for
the Qualification of Explosive
Materials for Military Use
NATO
2001
STANAG 4230 ED 1
Explosives, Specification for HNS
(Hexanitrostilbene) for Deliveries
from One NATO Nation to Another
NATO
2002
STANAG 4300 ED 1 AMD 0
Test Procedures for Assessing the
Quality of Aluminium Powder, for
Use in Explosive Formulation, for
Deliveries from One NATO Nation
to Another
NATO
1993
STANAG 4324 ED 2 AMD 0
Electromagnetic Radiation (Radio
Frequency) Test Information to
Determine the Safety and
Suitability for Service of ElectroExplosive Devices and Associated
Electronic Systems in Munitions
and Weapon Systems
NATO
2007
STANAG 4363 ED 2
Fuzing Systems: Development
Testing for the Assessment of Lead
and Booster Explosive
Components
NATO
2002
STANAG 4397 ED 1
NATO Catalog of Explosives - AOP26 Edition 1
(Active/Historical)(DRAFT)
Explosives, NATO Catalogue of,
Implementation of Allied
Ordnance Publication No 26 (AOP26)
(Draft)(Active/Historical)Nuclear
Electromagnetic Pulse Testing of
Munitions Containing ElectroExplosives Devices Ratification
Draft 1
NATO
2001
STANAG 4397 ED 1 AMD 0
STANAG 4416 ED 1
NATO
NATO
2002
77
STANAG 4440 ED 1 AMD 0
(Active/Historical)Manual of NATO
Safety Principles for the Storage of
Military Ammunication and
Explosives - AASTP-1
NATO
1996
STANAG 4440 ED 1 AMD 1
Manual of NATO Safety Principles
for the Storage of Military
Ammunition and Explosives AASTP-1 Amendment 1, 11/4/97
NATO
1997
STANAG 4441 ED 1 AMD 0
(Active/Historical)Manual of Safety NATO
Principles for the Transport of
Military Ammunication and
Explosives - AASTP-2
1996
STANAG 4441 ED 1 AMD 1
Manual of Safety Principles for the
Transport of Military Ammunition
and Explosives - AASTP-2
Amendment 1, 11/4/97
NATO
1997
STANAG 4515 ED 1
Explosives: Thermal
Characterization by Differential
Thermal Analysis, Differential
Scanning Calorimetry and
Thermogravimetric Analysis
NATO
2002
STANAG 4516 ED 1
(Draft)Cannon (Greater Than 12.7
mm), Design Safety Requirements
and Safety and Suitability for
Service Evaluation of the
Weapon/Munition Combination
NATO
2001
STANAG 4525 ED 1
Explosives, Physical/Mechanical
Properties, Thermomechanical
Analysis for Determining the
Coefficient of Linear Thermal
Expansion (TMA)
NATO
2001
STANAG 4540 ED 1
Explosives, Procedures for
Dynamic Mechanical Analysis
(DMA) and Determination of Glass
Transition Temperature
NATO
2002
STANAG 4543 ED 1
Explosives, Specification for NTO
(3-Nitro-1,2,4-Triazol-5-One) for
Deliveries from One NATO Nation
to Another
NATO
2002
STANAG 4556 ED 1 AMD 0
Explosives: vacuum stability test
NATO
1999
Regional and national
standards, guidelines and
regulations
78
ARINC 654 ITEM 5.0
Intrinsic safety/explosion
proofness
Standard Guide for Deployment of
Blast Resistant Trash Receptacles
in Crowded Places
ARINC
1994
ASTM
2011
ASTM F2247-11
Standard Test Method for Metal
Doors Used in Blast Resistant
Applications (Equivalent Static
Load Method)
ASTM
2011
ASTM E2520-07
Standard Practice for Verifying
Minimum Acceptable Performance
of Trace Explosive Detectors
ASTM
2007
ASTM E2740-12e1
Standard Specification for Trash
Receptacles Subjected to Blast
Resistance Testing
ASTM
2012
ARTICLE 13 NFPC
Dust explosion hazards eighth
edition
Explosives, Ammunition and
Blasting Agents Eighth Edition
Dust explosion hazards
Explosives, Ammunition and
Blasting Agents
Packing of Explosives (Class 1) for
Transportation Corrigendum:
February 1998
BOCA
1990
BOCA
1990
BOCA
BOCA
1999
1999
CGSB
1997
Explosion suppression systems
Explosion resistant equipment;
German version EN 14460:2006
Dust explosion venting protective
systems; German version EN
14491:2006
DIN
DIN
2006
2007
DIN
2007
DIN EN 14986:2007
Design of fans working in
potentially explosive atmospheres;
German version EN 14986:2007
DIN
2007
DIN EN 14994:2007
Gas explosion venting protective
systems; German version EN
14994:2007
DIN
2007
DIN EN 1127-1:2008
Explosive atmospheres - Explosion
prevention and protection - Part 1:
Basic concepts and methodology;
German version EN 1127-1:2007
DIN
2008
ASTM E2831/E2831M-11
ARTICLE 26 NFPC
CHAPTER 12 NFPC
CHAPTER 30 NFPC
43.151-97-CAN/CGSB
DIN EN 14373:2006
DIN EN 14460:2007
DIN EN 14491:2007
79
ANSI/IEEE C95.4-2002
Recommended Practice for
Determining Safe Distances from
Radio Frequency Transmitting
Antennas When Using Electric
Blasting Caps During Explosive
Operations
IEEE
2002
ISA 60079-2
EXPLOSIVE ATMOSPHERES - PART 2:
EQUIPMENT PROTECTION BY
PRESSURIZED ENCLOSURES "P"
ISA
2010
C 0906
General Rules for the Construction
of Electric Machinery and
Apparatus for Use in Explosive Gas
Atmospheres (for General
Industries)
KSA
1982
C 0909
Supplementary Requirements for
Construction of Electrical
Apparatus for Explosive
Atmospheres in General Industry
KSA
1993
C 0910
Explosion Proof Construction of
Electrical Machinery and
Apparatus (for Coal Mines)
KSA
1980
C 0911
Testing Methods for Construction
of Electrical Machinery and
Apparatus for Use in Explosive Gas
Atmospheres (for Coal Mines)
KSA
1981
C 0912
Testing Methods for Electrical
Apparatus for Use in Explosive Gas
Atmospheres in General Industry
KSA
1990
C 0914
Electrical Apparatus for Explosive
Gas Atmospheres - General
Requirements
KSA
1995
C 0915
Electrical Apparatus for Explosive
Gas Atmospheres - Construction
Verification Test of Flameproof
Enclosures of Electrical Apparatus
KSA
1995
C 0916
Electrical Apparatus for Explosive
Gas Atmospheres - Type of
Protection "P"
KSA
1995
C 0917
Electrical Apparatus for Explosive
Gas Atmospheres - Oil Immersed
Apparatus
KSA
1995
80
C 0918
Electrical Apparatus for Explosive
Gas Atmospheres - Increased
Safety "E"
KSA
1995
C 0919
Electrical Apparatus for Explosive
Gas Atmospheres - Intrinsic Safety
"I"
KSA
1995
C 8001
Luminaries for Explosive
Atmospheres
Hand Lanterns for Explosive
Atmospheres
Safety sheathed explosive
Explosion-proof type battery
locomotives
Testing Methods for Explosive
Vapors in Aviation Turbine Fuel
Analytical Methods of Explosives
Testing Methods of Explosives
Ammon Explosives and TNT
Explosives
Testing Methods for Permissible
Explosives
Water gel explosives
Intrinsic Safety Systems for
Explosive Gas Atmospheres in
Ships-General Requirements
KSA
1990
KSA
1986
KSA
KSA
1974
1981
KSA
1987
KSA
KSA
KSA
1962
1983
1988
KSA
1988
KSA
KSA
1989
1985
DEF STAN 02-179
Requirements for Lockers
(Magazine, RU Magazine and
Detonator) Used for Storage of
Explosive Stores in HM Surface
Ships and Submarines Issue 1;
04.02; Category 2;
MODUK
2002
DEF STAN 13-102
Testing of Materials Which Are
Required to Be Compatible with
Explosives Issue 3
MODUK
2004
DEF STAN 13-129
Requirements for Explosives
Hazard Data Sheets for mod Use
Issue 1 (11.92)
MODUK
1992
DEF STAN 13-157
(Obsolescent)plastic cord
explosive interim issue 1 (06.94)
MODUK
1994
C 8003
E 4107
E 6030
M 2223
M 4801
M 4802
M 4806
M 4810
M 4812
V 8015
81
DEF STAN 13-165
Composition, Exploding (CE)
Types: Aggregated Crystalline
Crystalline, Dense Granulated, Size
1 and Size 2
MODUK
1995
DEF STAN 13-189
Determination of the Abel Heat
Test of Explosives Issue 1
MODUK
1996
DEF STAN 13-190
Determination of Density of High
Explosives Issue 1
MODUK
1996
DEF STAN 68-58
Dyestuffs for Explosives
Applications
Charcoal, Wood for Explosives and
Pyrotechnics Types: A, D, F, G and
J Issue 2
MODUK
1997
MODUK
2013
DEF STAN 05-61: PART 14
Quality Assurance Procedural
Requirements Part 14: Proof
Schedules for Conventional
Weapons, Ammunition and
Explosive Items of New
Manufacture Issue 1; 08.94;
Supersedes Def Stan 05-62: Part
17
MODUK
1994
DEF STAN 05-61: PART 17
Quality Assurance Procedural
Requirements Part 17: Proof of
Explosive Operated Devices That
Discharge Projectiles Issue 01;
12.92
MODUK
1992
DEF STAN 21-3
The Requirement for Assessing
Transient Coupled Energy into
Stores Containing ElectroExplosive Devices (EED) Issue 1:
4/2000; Incorporating NES 1003
Category 1 Issue 2: 1/1993
MODUK
2000
NFPA 68-2007
NFPA 68: Standard on Explosion
Protection by Deflagration
Venting, 2007 Edition
NFPA
2007
DEF STAN 91-31
82
ONORM EN 15198:2007
Methodology for the risk
assessment of non-electrical
equipment and components for
intended use in potentially
explosive atmospheres
ON
2007
ONORM EN 15233:2007
Methodology for functional safety
assessment of protective systems
for potentially explosive
atmospheres
ON
2007
ONORM EN 1127-1:2008
Explosive atmospheres - Explosion
prevention and protection - Part 1:
Basic concepts and methodology
ON
2008
AS/NZS 1826:2008
Electrical equipment for explosive
gas atmospheres - Special
protection - Type of protection
SAI
2006
AS/NZS 60079.0:2008
Explosive atmospheres Equipment - General requirements
Explosive atmospheres Equipment protection by
flameproof enclosures
SAI
2008
SAI
2007
AS/NZS 60079.1:2007
Explosive atmospheres Equipment protection by
flameproof enclosures
SAI
2007
AS/NZS
60079.1:2007/Amdt 1:2008
Explosive atmospheres Equipment protection by
flameproof enclosures
SAI
2007. Amendment
1 2008
AS/NZS
60079.10:2004/Amdt
1:2007
Electrical apparatus for explosive
gas atmospheres - Classification of
hazardous areas (IEC 6007910:2002 MOD)
SAI
2004. Amendment
1 2007
AS/NZS 60079.11:2006
Explosive atmospheres Equipment protection by intrinsic
safety
SAI
2006
AS/NZS
60079.15:2006/Amdt
1:2006
Electrical apparatus for explosive
gas atmospheres - Construction,
test, and marking of type of
protection, Electrical apparatus
SAI
2006. Amendment
1 2006
AS/NZS 60079.18:2005
Electrical apparatus for explosive
gas atmospheres - Construction,
test and marking of type of
protection encapsulation
Electrical apparatus
SAI
2005
AS/NZS 60079.1:2007
83
AS/NZS 60079.2:2007
Explosive atmospheres Equipment protection by
pressurized enclosure
SAI
2007
AS/NZS 60079.29.2:2008
Explosive atmospheres - Gas
detectors - Selection, installation,
use and maintenance of detectors
for flammable gases and oxygen
SAI
2008
AS/NZS 60079.5:2007
Explosive atmospheres Equipment protection by
powdered filling 'q'
SAI
2007
AS/NZS 60079.6:2007
Explosive atmospheres Equipment protection by oil
immersion 'o'
SAI
2007
AS/NZS 60079.7:2006
Explosive atmospheres Equipment protection by
increased safety 'e'
SAI
2006
AS/NZS
60079.7:2006/Amdt 1:2007
Explosive atmospheres Equipment protection by
increased safety
SAI
2006. Amendment
1 2007
AS/NZS 61241.0:2005
Electrical apparatus for use in the
presence of combustible dust General requirements
SAI
2005
AS/NZS 61241.1:2005
Electrical apparatus for use in the
presence of combustible dust Protection by enclosures
SAI
2005
AS/NZS 61241.14:2005
Electrical apparatus for use in the
presence of combustible dust Selection and installation
(IEC61241-14, Ed.1.0(2004) MOD)
SAI
2005
AS/NZS
61241.14:2005/Amdt
3:2006
Electrical apparatus for use in the
presence of combustible dust Selection and installation
SAI
2005. Amendment
3 2006
AS/NZS 2381.1:2005/Amdt
2:2006
Electrical equipment for explosive
atmospheres - Selection,
installation and maintenance General requirements
SAI
2006. Amendment
1 2007
AS/NZS 2381.1:2005/Amdt
3:2007
Electrical equipment for explosive
gas atmospheres - Selection,
installation and maintenance General requirements
SAI
2006. Amendment
1 2007
84
MP 87
Australian/New Zealand
Certification Scheme for
explosion-protected electrical
equipment (anzex Scheme) Basic
rules and procedures (Replaces
MP 87(INT))
SNZ
2004
NZS 4403
Code of Practice for the Storage,
Handling, and Use of Explosives
(Explosives Code) (Incorportating
Amendment 1)
SNZ
1976
A-A-59687
Robot, explosive ordnance
disposal (eod)
Explosive ordnance for space
vehicles, general specification for
(metric) (no s/s document)
US DoD
US DoD
1996
Ammonium picrate (explosive d)
Actuator explosive, linear, m2
parts for
Actuator, explosive, linear, m2
loading, assembling, and packing
Bomb, smoke, 100-lb; an-m47a4,
wp filling (no s/s document)
Bomb, smoke or incendiary, anm474, 100lb; inert components for
(no s/s document)
US DoD
US DoD
1999
1996
US DoD
1996
US DoD
2004
US DoD
2004
Bomb, practice, 250lb, m124 body
parts assembly (no s/s document)
Bomb, general purpose, 750lb,
m117a1e2 loading, assembling
and packing (no s/s document)
US DoD
1980
US DoD
1976
MIL-B-14738A NOT 1
Bomb, leaflet, 750 lb, size, m129e2
body parts assembly (no s/s
document)
US DoD
1987
MIL-B-14910B NOT 1
Bomb, general purpose, 750
pound, m117a2 and m117a3
loading, assembling and marking
(no s/s document)
US DoD
1983
MIL-B-23360B NOT 1
Bomb, incendiary, th3, 4-pound,
m126
Bomb, gas, 500-pound, mark 94
mod o, gb-filled; without fuze and
burster (no s/s document)
US DoD
1991
US DoD
2004
DOD-E-83578A NOT 2
MIL-A-166C NOT 2
MIL-A-46545B NOT 1
MIL-A-46556B NOT 2
MIL-B-10746D NOT 3
MIL-B-13393E NOT 2
MIL-B-13409A NOT 1
MIL-B-14710A NOT 1
MIL-B-46433A NOT 3
85
MIL-B-50539A NOT 1
Bomb dispenser, cnu-80/e25
shipping and storage container for
(no s/s document)
US DoD
1989
MIL-B-60915A NOT 1
Bomb, general purpose, 750 lb,
m117a1 loading, assembling and
packing (no s/s document)
US DoD
1976
MIL-B-60918A NOT 1
Bomb, fragmentation, blu-26/b
loading, assembling and packing
(no s/s document)
US DoD
1980
MIL-B-7619A NOT 1
Blower, exhaust, electric motor
driven explosion proof (no s/s
document))
US DoD
1993
MIL-B-81006B NOT 1
Bomb, free fall, demonstration of
dispersion requirements for
Baffle material, explosion
suppression, expanded aluminum
mesh, for aircraft fuel tanks (no s/s
document)
US DoD
1987
US DoD
2004
Bomb-body, 750 pound mc-1
bomb (no s/s document)
Cellulose, cotton (for use in
explosives)
Cartridge, Bomb Ejection MLU11/C and Cartridge, Bomb Ejection
MLU-12/C (No S/S Document)
US DoD
1989
US DoD
1988
Cartridge, 20mm, high explosive,
incendiary, m97a2
Cartridge, 20mm, high explosive,
incendiary, tracer, self destruct,
m246a1 loading, assembling and
packing (no s/s document)
US DoD
1995
US DoD
1996
Chamber, explosion-proof testing
(no s/s document)
Detectors, explosive vapor (no s/s
document)
Device, metal (breast and collar)
explosive ordnance disposal (no
s/s document)
US DoD
1979
US DoD
1991
US DoD
1997
Driver, explosive, mark 3 mod 0
Badge, qualification, explosive
ordnance disposal, army
US DoD
US DoD
1999
MIL-B-87162A NOT 2
MIL-B-9715A NOT 1
MIL-C-206A NOT 1
MIL-C-27029A(1) NOT 4
MIL-C-46621C NOT 2
MIL-C-63413A NOT 2
MIL-C-9435B NOT 1
MIL-D-16191F NOT 1
MIL-D-16475/30A NOT 1
MIL-D-81336A NOT 1
MIL-DTL-3628/216
US DoD
86
MIL-DTL-3628/25M NOT 3
Badge, qualification, explosive
ordnance disposal (s/s by mil-dtl3628/216, mil-dtl-3628/217, and
mil-dtl-3628/218)
US DoD
2001
MIL-DTL-60585B(1)
Case, projectile burster - assembly,
m1e1
Separator, explosive (1w18)
Cutter, explosive actuated, mk 33
mod 0
Explosive composition, hbx type
Explosive fitting mark 19 mod 1
Explosive harness assembly
missile-rocket, xm84 loading,
assembling and packing (no s/s
document)
US DoD
2006
US DoD
US DoD
2000
1998
US DoD
US DoD
US DoD
1988
1992
1987
Flashlight (explosionproof) (use
mil-f-3747)
Floodlight, electric, explosion
proof, 300 watts maximum,
adjustable stand mounted (no s/s
document)
US DoD
1974
US DoD
1999
MIL-HDBK-1512
Electroexplosive subsystems,
electrically initiated, design
requirements and test methods
US DoD
1997
MIL-HDBK-83578
Criteria for explosive systems and
devices used on space vehicles
Lead, Explosive, PA534 Parts for
and Loading, Assembling and
Packing
US DoD
1999
US DoD
2008
Mine, chemical agent, vx, m23 (no
s/s document)
Mine, chemical agent, vx, m23;
inert components (no s/s
document)
US DoD
2004
US DoD
2004
MIL-M-63018A NOT 1
Manual, technical, non-nuclear
explosive ordnance disposal (no
s/s document)
US DoD
1996
MIL-P-45952/1 NOT 3
MIL-P-46620C NOT 2
Pin, quick-release, detent
Projectile, 20mm, high explosive
incendiary, m97a2, metal parts
(s/s by dtl7259066)
US DoD
US DoD
1997
MIL-DTL-82939
MIL-DTL-82968
MIL-E-22267A NOT 1
MIL-E-23683A NOT 1
MIL-E-46511A NOT 1
MIL-F-17004C NOT 1
MIL-F-6139D NOT 1
MIL-L-70828A NOT 2
MIL-M-46984D NOT 2
MIL-M-46985D NOT 2
87
MIL-P-46964A NOT 2
Projectile, 8 inch, chemical agent
gb, m426, without fuze and
burster; filling of (no s/s
document)
US DoD
2004
MIL-P-46987B NOT 2
Projectile, 8-inch, chemical agent
vx, m426, without fuze and
burster; filling of (no s/s
document)
US DoD
2004
MIL-PRF-38715B(1)
Indicator, combustible gas and
oxygen
Flexible explosive
Hydraulic fluid, petroleum base;
aircraft, missile, and ordnance
Foam material, explosion
suppression, inherently
electrostatically conductive, for
aircraft fuel tanks
US DoD
2007
US DoD
US DoD
2008
2006
US DoD
2006
Relay, explosive, xm10 loading,
assembling and packing
Relay, explosive, xm10 parts for
Switch, firing, mark 8 mod o and 1
(inertia)(for exploder mechanism
mark 19 series)
US DoD
1997
US DoD
US DoD
1997
1996
MIL-STD-1320-112A(1) NOT
4
Truckloading Bomb 500 LB. MK 82
MOD 2 (Thermally Protected) on
Pallet, MHU-122/E Fleet Issue Unit
Load (See Notice 4 for
Replacement Information)
US DoD
2008
MIL-STD-1323-253A NOT 1
Unit load for underway
US DoD
replenishment bomb, general
purpose: 2000 lb mk 84 mods 3, 5,
and 6 (thermally protected) in unit
load adapter, mk 79 mod 0 with
saddles (2642646) (see notice 1 for
replacement information)
2006
MIL-STD-1323-283A NOT 1
Unit load for underway
replenishment fin assembly,
bomb, for 1000 lb g.p. Bomb mk
83 in adapter, pallet, adu-425/e
(see notice 1 for replacement
information)
2006
MIL-PRF-46676B(1)
MIL-PRF-5606H(3)
MIL-PRF-87260B
MIL-R-46903B NOT 2
MIL-R-46904B NOT 1
MIL-S-19819C NOT 1
US DoD
88
MIL-STD-1323-310A NOT 2
Unit load for underway
replenishment fin assembly,
bomb, bsu-86/b in pallet adapter
adu-535/e (see notive 2 for
replacement information)
US DoD
2006
MIL-STD-1323-351A NOT 1
Unit load for underway
replenishment 2.75 inch
warheads, m257, m261 or m267 in
container, pa 92 (see notice 1 for
replacement information)
US DoD
2006
MIL-STD-1323-97B NOT 1
Unit load for underway
replensihment dispenser and
bomb, aircraft cbu-mk 20 and
mods (rockeye ii) in container,
cnu-319/e (see notice 1 for
replacement information)
US DoD
2006
MIL-STD-1531A NOT 2
Insert arrangements for mil-c83733 rack to panel connectors,
shell size a
US DoD
2006
MIL-STD-2088B
MIL-STD-2105C NOT 2
Bomb rack unit (bru), aircraft
Hazard assessment tests for nonnuclear munitions
Explosive components, electrically
initiated, basic evaluation tests for
Waxes, coal-based, for use in
r8150 explosive
Shell, electrical connector - ramp
power, 416/240 volts
Driver, projectile unit, power
actuated (high velocity) (above
water only), pin, drive, power
actuated, and cartridge, power
actuated tool (no s/s document)
US DoD
US DoD
2007
US DoD
1989
US DoD
1992. Notice 1
2013
US DoD
2006
Staubbraende und
Staubexplosionen; Gefahren,
Beurteilung, Schutzmassnahmen
VDI
1992
MIL-STD-322B NOT 1
MIL-W-71094 NOT 1
MS27267 NOT 3
QPL-GGG-D-777-15 NOT 1
VDI 2263
US DoD
3.2 Cybersecurity threats
Document Number
Title
ISO and ISO/IEC standards
Organization Status
89
IEC 62443-2-1 Ed. 1.0
ISO 13491-2
ISO 13492
ISO 15782-1
ISO 21188
ISO 22307
ISO 22472
ISO 28001
ISO 9564 -1, 2, 3 Banking
Personal Identification
Number Package
ISO 9564-2
ISO 9735-7
Industrial communication networks
- network and system security Part 2-1: Establishing an industrial
automation and control system
security program
Banking -- Secure cryptographic
devices (retail) -- Part 2: Security
compliance checklists for devices
used in financial transactions
Financial services - Key
management related data element
- Application and usage of ISO 8583
data elements 53 and 96
Certificate management for
financial services - Part 1: Public
key certificates
Public key infrastructure for
financial services -- Practices and
policy framework
Financial services - Privacy impact
assessment
Ships and marine technology Guidelines for the operation and
installation of voyage data
recorders (VDR)
Security management systems for
the supply chain - Best practices for
implementing supply chain
security, assessments and plans Requirements and guidance
ISO 9564 - Banking Personal
Identification Number Package
IEC
2010
ISO
2005
ISO
2007
ISO
2009
ISO
2006
ISO
2008
ISO
2006
ISO
2007
ISO
2011
Banking -- Personal Identification
Number management and security
-- Part 2: Approved algorithms for
PIN encipherment
Electronic data interchange for
administration, commerce and
transport (EDIFACT) -- Application
level syntax rules (Syntax version
number: 4, Syntax release number:
1) -- Part 7: Security rules for batch
EDI (confidentiality)
ISO
2005
ISO
2002
90
ISO 9735-9
ISO TS 21547
ISO/TR 11633-1
ISO/TR 11633-2
ISO/TR 13569
ISO/TR 14742
ISO/TR 19038
ISO/TR 9564-4
ISO/TS 13606-4
ISO/IEC 10035-1/AMD1
Electronic data interchange for
administration, commerce and
transport (EDIFACT) -- Application
level syntax rules (Syntax version
number: 4, Syntax release number:
1) -- Part 9: Security key and
certificate management message
(message type- KEYMAN)
Health informatics -- Security
requirements for archiving of
electronic health records -Principles
Health informatics - Information
security management for remote
maintenance of medical devices
and medical information systems Part 1: Requirements and risk
analysis
Health informatics - Information
security management for remote
maintenance of medical devices
and medical information systems Part 2: Implementation of an
information security management
system (ISMS)
Financial services -- Information
security guidelines
Financial services Recommendations on
cryptographic algorithms and their
use
Banking and related financial
services -- Triple DEA -- Modes of
operation -- Implementation
guidelines
Banking -- Personal Identification
Number (PIN) management and
security -- Part 4: Guidelines for PIN
handling in open networks
Health informatics - Electronic
health record communication - Part
4: Security
Amendment 1 to ISO/IEC 100351:1995 Incorporation of
extensibility markers and
authentication parameters
ISO
2002
ISO
2010
ISO
2009
ISO
2009
ISO
2005
ISO
2010
ISO
2005
ISO
2004.
ISO
2009
ISO/IEC
1997
91
ISO/IEC 10116
ISO/IEC 10118-1
ISO/IEC 10118-3/Amd1
ISO/IEC 10118-4
ISO/IEC 10164-7
ISO/IEC 10164-8
ISO/IEC 10181-1
ISO/IEC 10181-2
ISO/IEC 10181-3
ISO/IEC 10181-4
ISO/IEC 10181-5
ISO/IEC 10181-6
Information technology - Security
techniques - Modes of operation
for an n-bit block cipher
Information technology -- Security
techniques -- Hash-functions -- Part
1: General
Information technology - Security
techniques - Hash-functions - Part
3: Dedicated hash-functions Amendment 1: Dedicated HashFunction 8 (SHA-224)
Information technology - Security
techniques - Hash-functions - Part
4: Hash-functions using modular
arithmetic
Information technology - Open
Systems Interconnection - Systems
Management: Security alarm
reporting function
Information technology - Open
Systems Interconnection - Systems
Management: Security audit trail
function
Information technology - Open
Systems Interconnection - Security
frameworks for open systems:
Overview
Information technology - Open
Systems Interconnection - Security
frameworks for open systems:
Authentication framework
Information technology - Open
Systems Interconnection - Security
frameworks for open systems:
Access control framework
Information technology - Open
Systems Interconnection - Security
frameworks for open systems:
Non-repudiation framework - Part
4:
Information technology - Open
Systems Interconnection - Security
frameworks for open systems:
Confidentiality framework
Information technology - Open
Systems Interconnection - Security
frameworks for open systems:
ISO/IEC
2006
ISO/IEC
2000
ISO/IEC
2006
ISO/IEC
1998
ISO/IEC
1992
ISO/IEC
1993
ISO/IEC
1996
ISO/IEC
1996
ISO/IEC
1996
ISO/IEC
1997
ISO/IEC
1996
ISO/IEC
1996
92
Integrity framework
ISO/IEC 10181-7
ISO/IEC 10373-6:/Amd4
ISO/IEC 10736
ISO/IEC 10745
ISO/IEC 11577
ISO/IEC 11586-1
ISO/IEC 11586-2
ISO/IEC 11586-3
ISO/IEC 11586-4
ISO/IEC 11586-5
Information technology - Open
Systems Interconnection - Security
frameworks for open systems:
Security audit and alarms
framework
- Amendment 4: Bit rates of fc/8,
fc/4 and fc/2 and frame size from
512 to 4096 bytes
Information technology Telecommunications and
information exchange between
systems - Transport layer security
protocol
Information technology - Open
Systems Interconnection - Upper
layers security model
Information technology - Open
Systems Interconnection - Network
layer security protocol
Information technology - Open
Systems Interconnection - Generic
upper layers security: Overview,
models and notation
Information technology - Open
Systems Interconnection - Generic
upper layers security: Security
Exchange Service Element (SESE)
service definition
Information technology - Open
Systems Interconnection - Generic
upper layers security: Security
Exchange Service Element (SESE)
protocol specification
Information technology - Open
Systems Interconnection - Generic
upper layers security: Protecting
transfer syntax specification
Information technology - Open
Systems Interconnection - Generic
upper layers security: Security
Exchange Service Element (SESE)
Protocol Implementation
Conformance Statement (PICS)
proforma
ISO/IEC
1996
ISO/IEC
2001. Amendment 4
2012
ISO/IEC
1995
ISO/IEC
1995
ISO/IEC
1995
ISO/IEC
1996
ISO/IEC
1996
ISO/IEC
1996
ISO/IEC
1996
ISO/IEC
1997
93
ISO/IEC 11586-6
ISO/IEC 11770-2/Cor1
ISO/IEC 11770-2:2008
ISO/IEC 11770-3
ISO/IEC 11770-3/Cor1
ISO/IEC 11770-4
ISO/IEC 11770-4/Cor1
ISO/IEC 11889-1
ISO/IEC 11889-2
ISO/IEC 11889-3
ISO/IEC 11889-4
ISO/IEC 13157-1
Information technology - Open
Systems Interconnection - Generic
upper layers security: Protecting
transfer syntax Protocol
Implementation Conformance
Statement (PICS) proforma
Information technology - Security
techniques - Key management Part 2: Mechanisms using
symmetric techniques Corrigendum 1
Information technology - Security
techniques - Key management Part 2: Mechanisms using
symmetric techniques
Information technology - Security
techniques - Key management Part 3: Mechanisms using
asymmetric techniques
Information technology - Security
techniques - Key management Part 3: Mechanisms using
asymmetric techniques Corrigendum 1
Information technology - Security
techniques - Key management Part 4: Mechanisms based on weak
secrets
Information technology - Security
techniques - Key management Part 4: Mechanisms based on weak
secrets - Corrigendum 1
Information technology - Trusted
Platform Module - Part 1: Overview
Information technology - Trusted
Platform Module - Part 2: Design
principles
Information technology - Trusted
Platform Module - Part 3:
Structures
Information technology - Trusted
Platform Module - Part 4:
Commands
Information technology Telecommunications and
information exchange between
systems - NFC Security - Part 1:
ISO/IEC
1997
ISO/IEC
Corrigendum 1 2009
ISO/IEC
2008
ISO/IEC
2008
ISO/IEC
Corrigendum 1 2009
ISO/IEC
2006
ISO/IEC
Corrigendum 1 2009
ISO/IEC
2009
ISO/IEC
2009
ISO/IEC
2009
ISO/IEC
2009
ISO/IEC
2010
94
NFC-SEC NFCIP-1 security services
and protocol
ISO/IEC 13157-2
ISO/IEC 13888-1
ISO/IEC 13888-2 /Cor1
ISO/IEC 13888-3
ISO/IEC 14888-1
ISO/IEC 14888-2
ISO/IEC 14888-3
ISO/IEC 14888-3/Amd1
ISO/IEC 14888-3/Cor1
ISO/IEC 14908-1
Information technology Telecommunications and
information exchange between
systems - NFC Security - - Part 2:
NFC-SEC cryptography standard
using ECDH and AES
Information technology - Security
techniques - Non-repudiation - Part
1: General
Corrigendum
ISO/IEC
2010
ISO/IEC
2009
ISO/IEC
Information technology - Security
techniques - Non-repudiation - Part
3: Mechanisms using asymmetric
techniques
Information technology - Security
techniques - Digital signatures with
appendix - Part 1: General
Information technology - Security
techniques - Digital signatures with
appendix - Part 2: Integer
factorization based mechanisms
Information technology - Security
techniques - Digital signatures with
appendix - Part 3: Discrete
logarithm based mechanisms
Information technology - Security
techniques - Digital signatures with
appendix - Part 3: Certificate-based
mechanisms - Amendment 1:
Elliptic Curve Russian Digital
Signature Algorithm, Schnorr
Digital Signature Algorithm, Elliptic
Curve Schnorr Digital Signature
Algorithm, and Elliptic Curve Full
Schnorr Digital Signature Algorithm
Information technology - Security
techniques - Digital signatures with
appendix - Part 3: Certificate-based
mechanisms - Corrigendum
Information technology - Control
network protocol - Part 1: Protocol
stack
ISO/IEC
2010. Corrigendum
2012
2009
ISO/IEC
2008
ISO/IEC
2008
ISO/IEC
2006
ISO/IEC
Amendment 1 2010
ISO/IEC
Corrigendum 1 2007
ISO/IEC
2012
95
ISO/IEC 15288
ISO/IEC 15408-1
ISO/IEC 15408-2
ISO/IEC 15408-3
ISO/IEC 15424
ISO/IEC 15816
ISO/IEC 15945
ISO/IEC 15946-1
ISO/IEC 15946-5
ISO/IEC 15946-5/Cor1
ISO/IEC 16500-7
ISO/IEC 18014-1
Systems and software engineering System life cycle processes
Information technology - Security
techniques - Evaluation criteria for
IT security - Part 1: Introduction
and general model
Information technology - Security
techniques - Evaluation criteria for
IT security - Part 2: Security
functional components
Information technology - Security
techniques - Evaluation criteria for
IT security - Part 3: Security
assurance components
Information technology Automatic identification and data
capture techniques - Data Carrier
Identifiers (including Symbology
Identifiers)
Information technology - Security
techniques - Security information
objects for access control
Information technology - Security
techniques - Specification of TTP
services to support the application
of digital signatures
Information technology - Security
techniques - Cryptographic
techniques based on elliptic curves
- Part 1: General
Information technology - Security
techniques - Cryptographic
techniques based on elliptic curves
- Part 5: Elliptic curve generation
Information technology - Security
techniques - Cryptographic
techniques based on elliptic curves
- Part 5: Elliptic curve generation Corrigendum 1
Information technology -- Generic
digital audio-visual systems -- Part
7: Basic security tools
Information technology - Security
techniques - Time-stamping
services - Part 1: Framework
ISO/IEC
2008
ISO/IEC
2009
ISO/IEC
2008
ISO/IEC
2008
ISO/IEC
2008
ISO/IEC
2002
ISO/IEC
2002
ISO/IEC
2008
ISO/IEC
2009
ISO/IEC
2009. Corrigendum
2012
ISO/IEC
1999
ISO/IEC
2008
96
ISO/IEC 18014-2
ISO/IEC 18014-3
ISO/IEC 18031
ISO/IEC 18033-1
ISO/IEC 180331/FPDAmd1
ISO/IEC 18033-2
ISO/IEC 18033-4
ISO/IEC 18043
ISO/IEC 18045
ISO/IEC 19762-2
ISO/IEC 19762-3
ISO/IEC 19772
ISO/IEC 19784-4
Information technology - Security
techniques - Time-stamping
services - Part 2: Mechanisms
producing independent tokens
Information technology - Security
techniques - Time-stamping
services - Part 3: Mechanisms
producing linked tokens
Information technology - Security
techniques - Random bit
generation
Information technology - Security
techniques - Encryption algorithms
- Part 1: General
Amendment
ISO/IEC
2009
ISO/IEC
2009
ISO/IEC
2011
ISO/IEC
2005
Information technology - Security
techniques - Encryption algorithms
- Part 2: Asymmetric ciphers
ISO/IEC
2006
Information technology - Security
techniques - Encryption algorithms
- Part 4: Stream ciphers
Information technology - Security
techniques - Selection, deployment
and operations of intrusion
detection systems
Information technology - Security
techniques - Methodology for IT
security evaluation
Information technology Automatic identification and data
capture (AIDC) techniques Harmonized vocabulary - Part 2:
Optically readable media (ORM)
Information technology Automatic identification and data
capture (AIDC) techniques Harmonized vocabulary - Part 3:
Radio frequency identification
(RFID)
Information technology - Security
techniques - Authenticated
encryption
Information technology - Biometric
application programming interface
- Part 4: Biometric sensor function
provider interface
ISO/IEC
2011
ISO/IEC
2006
ISO/IEC
2008
ISO/IEC
2008
ISO/IEC
2008
ISO/IEC
2009
ISO/IEC
2011
ISO/IEC
97
ISO/IEC 19784-4/Cor1
Corrigendum
ISO/IEC
ISO/IEC 19785-3/Amd1
- Amendment 1: Support for
Additional Data Elements
ISO/IEC
2011. Corrigendum
2013
Amendment 1 2010
ISO/IEC 19790
Information technology - Security
techniques - Security requirements
for cryptographic modules
Information technology - Security
techniques - Security evaluation of
biometrics
Information technology - Biometric
data interchange formats - Part 11:
Signature/sign processed dynamic
data
Corrigendum
ISO/IEC
2012
ISO/IEC
2009
ISO/IEC
2013
ISO/IEC
2005. Corrigendum
2009
Corrigendum 1 2012
ISO/IEC 19792
ISO/IEC 19794-11
ISO/IEC 19794-2 /Cor1
ISO/IEC 19794-2/Cor1
ISO/IEC 19794-9 /Amd1
ISO/IEC 19795-2
ISO/IEC 20005
ISO/IEC 21000-15/Amd1
ISO/IEC 21827
ISO/IEC 23004-7
ISO/IEC 24709-1
Information technology - Biometric ISO/IEC
data interchange formats - Part 2:
Finger minutiae data - Corrigendum
1
- Amendment 1: Conformance
ISO/IEC
testing methodology
Information technology - Biometric ISO/IEC
performance testing and reporting
- Part 2: Testing methodologies for
technology and scenario evaluation
Information technology - Sensor
networks - Services and interfaces
supporting collaborative
information processing in
intelligent sensor networks
- Amendment 1: Security in Event
Reporting
Information technology - Security
techniques - Systems Security
Engineering - Capability Maturity
Modelr (SSE-CMMr)
Information technology Multimedia Middleware - Part 7:
System integrity management
Information technology Conformance testing for the
biometric application programming
interface (BioAPI) - Part 1: Methods
and procedures
Amendment 1 2013
2007
ISO/IEC
2013
ISO/IEC
Amendment 1 2008
ISO/IEC
2008
ISO/IEC
2008
ISO/IEC
2007
98
ISO/IEC 24745
ISO/IEC 24759
ISO/IEC 24760-1
ISO/IEC 24761
ISO/IEC 24762
ISO/IEC 24778
ISO/IEC 24824-3
ISO/IEC 27000
Information Technology
Security Techniques
Collection
ISO/IEC 27000
Information Technology
Security Techniques
Collection
ISO/IEC 27001 and 27002
IT Security Techniques
Package
ISO/IEC 27002
ISO/IEC 27003
ISO/IEC 27004
Information technology - Security
techniques - Biometric information
protection
Information technology - Security
techniques - Test requirements for
cryptographic modules
Information technology - Security
techniques - A framework for
identity management - Part 1:
Terminology and concepts
Information technology - Security
techniques - Authentication
context for biometrics
Information technology - Security
techniques - Guidelines for
information and communications
technology disaster recovery
services
Information technology Automatic identification and data
capture techniques - Aztec Code
bar code symbology specification
Information technology - Generic
applications of ASN.1: Fast infoset
security
ISO/IEC 27000 Information
Technology Security Techniques
Collection
ISO/IEC
2011
ISO/IEC
2008
ISO/IEC
2011
ISO/IEC
2009
ISO/IEC
2008
ISO/IEC
2008
ISO/IEC
2008
ISO/IEC
2014
Information technology - Security
techniques - Information security
management systems - Overview
and vocabulary
ISO/IEC 27001 and 27002 IT
Security Techniques Package.
ISO/IEC
2012
ISO/IEC
2002
Information technology - Security
techniques - Code of practice for
information security management
ISO/IEC
2005
Information technology -- Security
techniques -- Information security
management system
implementation guidance
Information technology - Security
techniques - Information security
management - Measurement
ISO/IEC
2010
ISO/IEC
2009
99
ISO/IEC 27005
ISO/IEC 27006
ISO/IEC 27007
ISO/IEC 27010
ISO/IEC 27011
ISO/IEC 27013
ISO/IEC 27014
ISO/IEC 27031
ISO/IEC 27032
ISO/IEC 27033-1
ISO/IEC 27033-2
Information technology - Security
techniques - Information security
risk management
Information technology - Security
techniques - Requirements for
bodies providing audit and
certification of information security
management systems
Information technology - Security
techniques - Guidelines for
information security management
systems auditing
Information technology - Security
techniques - Information security
management for inter-sector and
inter-organizational
communications
Information technology - Security
techniques - Information security
management guidelines for
telecommunications organizations
based on ISO/IEC 27002
Information technology - Security
techniques - Guidance on the
integrated implementation of
ISO/IEC 27001 and ISO/IEC 20000-1
Information technology - Security
techniques - Governance of
information security
Information technology - Security
techniques - Guidelines for
information and communication
technology readiness for business
continuity
Information technology - Security
techniques - Guidelines for
cybersecurity
Information technology - Security
techniques - Network security Part 1: Overview and concepts
Information technology - Security
techniques - Network security Part 2: Guidelines for the design
and implementation of network
security
ISO/IEC
2011
ISO/IEC
2011
ISO/IEC
2011
ISO/IEC
2012
ISO/IEC
2008
ISO/IEC
2012
ISO/IEC
2013
ISO/IEC
2011
ISO/IEC
2012
ISO/IEC
2009
ISO/IEC
2012
100
ISO/IEC 27034-1
Information technology - Security
techniques - Application security Part 1: Overview and concepts
ISO/IEC
2011
ISO/IEC 27035
Information technology - Security
techniques - Information security
incident management
Information technology - Security
techniques - Guidelines for
identification, collection,
acquisition and preservation of
digital evidence
Information technology - Security
techniques - Privacy framework
ISO/IEC
2011
ISO/IEC
2012
ISO/IEC
2011
Information technology - Security
techniques - Verification of
cryptographic protocols
Information technology - Security
techniques - Signcryption
Information technology - Radio
frequency identification for item
management - RFID Emblem
ISO/IEC
2011
ISO/IEC
2011
ISO/IEC
2012
Information technology Telecommunications and
information exchange between
systems - Security framework for
ubiquitous sensor networks
Information technology - Sensor
networks: Sensor Network
Reference Architecture (SNRA) Part 4: Entity models
Information technology - Security
techniques - Lightweight
cryptography - Part 1: General
Information technology - Security
techniques - Lightweight
cryptography - Part 2: Block ciphers
Information technology - Security
techniques - Lightweight
cryptography - Part 3: Stream
ciphers
Information technology - Security
techniques - Check character
systems
Information technology - Security
techniques - Digital signature
schemes giving message recovery -
ISO/IEC
2012
ISO/IEC
2013
ISO/IEC
2012
ISO/IEC
2012
ISO/IEC
2012
ISO/IEC
2003
ISO/IEC
2006
ISO/IEC 27037
ISO/IEC 29100
ISO/IEC 29128
ISO/IEC 29150
ISO/IEC 29160
ISO/IEC 29180
ISO/IEC 29182-4
ISO/IEC 29192-1
ISO/IEC 29192-2
ISO/IEC 29192-3
ISO/IEC 7064
ISO/IEC 9796-3
101
Part 3: Discrete logarithm based
mechanisms
ISO/IEC 9797-2
ISO/IEC 9797-3
ISO/IEC 9798-1
ISO/IEC 9798-2/Cor1
ISO/IEC 9798-2/Cor3
ISO/IEC 9798-3
ISO/IEC 9798-3/Amd1
ISO/IEC 9798-3/Cor1
ISO/IEC 9798-3/FPDAmd1
ISO/IEC 9798-4
ISO/IEC 9798-4/Cor1
Information technology -- Security
techniques -- Message
Authentication Codes (MACs) -Part 2: Mechanisms using a
dedicated hash-function
Information technology - Security
techniques - Message
Authentication Codes (MACs) - Part
3: Mechanisms using a universal
hash-function
Information technology - Security
techniques - Entity authentication Part 1: General
Information technology - Security
techniques - Entity authentication Part 2: Mechanisms using
symmetric encipherment
algorithms - Corrigendum
Corrigendum
ISO/IEC
2011
ISO/IEC
2011
ISO/IEC
2010
ISO/IEC
Corrigendum 1 2010
ISO/IEC
Information technology - Security
techniques - Entity authentication Part 3: Mechanisms using digital
signature techniques
Information technology - Security
techniques - Entity authentication
mechanisms - Part 3: Entity
authentication using a public key
algorithm - Amendment 1: .
Information technology - Security
techniques - Entity authentication
mechanisms - Part 3: Entity
authentication using a public key
algorithm - Corrigendum
Three-party entity authentification
Information technology -- Security
techniques -- Entity authentication
-- Part 4: Mechanisms using a
cryptographic check function
Information technology - Security
techniques - Entity authentication Part 4: Mechanisms using a
cryptographic check function Corrigendum
ISO/IEC
2008. Corrigendum 3
2013
1998
ISO/IEC
Amendment 2010
ISO/IEC
Corrigendum 1 2010
ISO/IEC
ISO/IEC
2006
1999
ISO/IEC
1998
102
ISO/IEC 9798-5
ISO/IEC 9798-6/Cor1
ISO/IEC 9805-2
ISO/IEC TR 15443-1
ISO/IEC TR 15443-2
ISO/IEC TR 15446
ISO/IEC TR 16166
ISO/IEC TR 19791
ISO/IEC TR 20004
ISO/IEC TR 27008
ISO/IEC TR 27015
Information technology - Security
techniques - Entity authentication Part 5: Mechanisms using zeroknowledge techniques
Corrigendum
Information technology - Open
Systems Interconnection - Protocol
for the Commitment, Concurrency
and Recovery service element:
Protocol Implementation
Conformance Statement (PICS)
proforma
Information technology - Security
techniques - Security assurance
framework - Part 1: Introduction
and concepts
Information technology - Security
techniques - Security assurance
framework - Part 2: Analysis
Information technology - Security
techniques - Guide for the
production of Protection Profiles
and Security Targets
Information technology Telecommunications and
information exchange between
systems - Next Generation
Corporate Networks (NGCN) Security of session-based
communications
Information technology - Security
techniques - Security assessment of
operational systems
Information technology - Security
techniques - Refining software
vulnerability analysis under ISO/IEC
15408 and ISO/IEC 18045
Information technology - Security
techniques - Guidelines for auditors
on information security controls
ISO/IEC
2009
ISO/IEC
ISO/IEC
Corrigendum 1 2009
1996
ISO/IEC
2012
ISO/IEC
2012
ISO/IEC
2009
ISO/IEC
2010
ISO/IEC
2010
ISO/IEC
2012
ISO/IEC
2011
Information technology - Security
techniques - Information security
management guidelines for
financial services
ISO/IEC
2012
103
ISO/IEC TR 27019
ISO/IEC TR 29108
Information technology - Security
techniques - Information security
management guidelines based on
ISO/IEC 27002 for process control
systems specific to the energy
utility industry
Information technology Terminology for intelligent homes
ISO/IEC
2013
ISO/IEC
2013
ITI (INCITS)
2000. Reapproved in
2005
ITI (INCITS)
2000. Reapproved in
2006
ITI (INCITS)
1999. Reapproved in
2006
ITI (INCITS)
2004
ITI (INCITS)
1998. Reapproved in
2005
ITI (INCITS)
1998. Reapproved in
2005
ITI (INCITS)
2001. Reapproved in
2007
ITI (INCITS)
1999. Reapproved in
2005
Other Global Standards and
Guidelines
INCITS/ISO/IEC 10118-1
INCITS/ISO/IEC 10118-2
INCITS/ISO/IEC 11770-3
INCITS/ISO/IEC 13335-1
INCITS/ISO/IEC 14888-1
INCITS/ISO/IEC 14888-3
INCITS/ISO/IEC 15292
INCITS/ISO/IEC 15408-1
Information Technology - Security
Techniques - Hash Functions - Part
1: General (formerly ANSI/ISO/IEC
10118-1:2000)
Information Technology - Security
Techniques - Hash-Functions - Part
2: Hash-Functions Using an n-Bit
Block Cipher
Information Technology - Security
Techniques - Key Management Part 3: Mechanisms Using
Asymmetric Techniques (formerly
ANSI/ISO/IEC 11770-3:1999)
Information Technology Guidelines for the Management of
IT Security - Part 1: Concepts and
Models for IT Security (new
national adoption) (formerly
ANSI/ISO/IEC TR 13335-1:1996)
Information Technology - Security
techniques - Digital signatures with
appendix - Part 1: General
(formerly ANSI/ISO/IEC 148881:1998)
Information Technology - Security
techniques - Digital signatures with
appendix - Part 3: Certificate-based
mechanisms (formerly
ANSI/ISO/IEC 14888-3:1998)
Information technology - Security
techniques - Protection Profile
registration procedures
Information Technology - Security
techniques - Evaluation criteria for
IT security - Part 1: Introduction
and general model (formerly
ANSI/ISO/IEC 15408-1:1999)
104
INCITS/ISO/IEC 15408-2
INCITS/ISO/IEC 15408-3
INCITS/ISO/IEC 15816
INCITS/ISO/IEC 15945
INCITS/ISO/IEC 27002
INCITS/ISO/IEC 9796
INCITS/ISO/IEC 9796-2
INCITS/ISO/IEC 9796-3
INCITS/ISO/IEC 9797-1
INCITS/ISO/IEC 9798-2
Information Technology - Security
techniques - Evaluation criteria for
IT security - Part 2: Security
functional requirements (formerly
ANSI/ISO/IEC 15408-2:1999)
Information Technology - Security
Techniques - Evaluation Criteria for
IT Security - Part 3: Security
Assurance Requirements (formerly
ANSI/ISO/IEC 15408-3:1999)
Information Technology - Security
Techniques - Security Information
Objects For Access Control
Information Technology - Security
Techniques - Specification of TTP
Services to Support the Application
of Digital Signatures
Information technology - Security
techniques - Code of practice for
information security management
<b>(Redesignation of
INCITS/ISO/IEC 17799:2005)</b>
Information Technology - Security
Techniques - Digital Signature
Scheme Giving Message Recovery
(formerly ANSI/ISO/IEC 9796-1991)
Information technology - Security
techniques - Digital signature
schemes giving message recovery
Part 2: Integer factorization based
mechanisms
Information Technology - Security
Techniques - Digital Signature
Schemes Giving Message Recovery
- Part 3: Discrete Logarithm Based
Mechanisms (formerly
ANSI/ISO/IEC 9796-3-2000)
Information Technology - Security
techniques - Message
Authentication Codes (MACs) - Part
1: Mechanisms using a block cipher
(formerly ANSI/ISO/IEC 9797-11999)
Information Technology - Security
techniques - Entity authentication Part 2: Mechanisms using
symmetric encipherment
ITI (INCITS)
1999. Reapproved in
2005
ITI (INCITS)
1999. Reapproved in
2005
ITI (INCITS)
2002. Reapproved in
2007
ITI (INCITS)
2002. Reapproved in
2007
ITI (INCITS)
2005
ITI (INCITS)
1991
ITI (INCITS)
2002
ITI (INCITS)
2000. Reapproved in
2005
ITI (INCITS)
1999. Reapproved in
2005
ITI (INCITS)
1999
105
algorithms (formerly ANSI/ISO/IEC
9798-2:1999)
INCITS/ISO/IEC 9798-4
Information Technology - Security
techniques - Entity authentication Part 4: Mechanisms using a
cryptographic check function
(formerly ANSI/ISO/IEC 97984:1999)
Information technology - Security
techniques - Information security
incident management
Telecommunication networks
security requirements
Incident Organization and Security
Incident Handling: Guidelines for
Telecommunications Organizations
Message handling system and
service overview
Message Handling Services: The
Voice Messaging Service. Annex G:
Secure voice messaging elements
of service. Annex H: Voice
Messaging security overview
Optical safety procedures and
requirements for optical transport
systems
Generic protection switching –
Linear trail and subnetwork
protection
Generic protection switching Shared mesh protection
Types and characteristics of SDH
network protection architectures
Interworking of SDH network
protection architectures
Optical Transport Network (OTN):
Linear protection
ITI (INCITS)
1999. Reapproved in
2005
ITI (INCITS)
2004
ITU-T
2004
ITU-T
2004
ITU-T, ISO/IEC
1999
ITU-T
1992
ITU-T
2012
ITU-T
2010
ITU-T
2012
ITU-T
1998
ITU-T
1997
ITU-T
2011
ITU-T G.873.2
Optical Transport Network (OTN) Ring Protection
ITU-T
2012
ITU-T G.8031/ Y.1342
Ethernet linear protection
switching
Ethernet Ring Protection Switching
ITU-T
2011
ITU-T
2012
INCITS/ISO/IEC TR 18044
ITU-T E.408
ITU-T E.409
ITU-T F.400/X.400 |
ISO/IEC 10021-1
ITU-T F.440
ITU-T G.664
ITU-T G.808.1
ITU-T G.808.3
ITU-T G.841
ITU-T G.842
ITU-T G.873.1
ITU-T G.8032/ Y.1344
106
ITU-T G.8131/ Y.1382
MPLS-TP linear protection
ITU-T
2007
ITU-T G.Suppl.52
Supplement 52 to ITU-T G-series
Recommendations - Ethernet ring
protection switching
Confidentiality system for
audiovisual services
Encryption key management and
Authentication System for
Audiovisual Services
H.323 security framework: Security
framework for H-series (H.323 and
other H.245-based) multimedia
systems
H.323 security framework: Baseline
security profile
H.323 security framework:
Signature security profile
H.323 security framework: Hybrid
security profile
H.323 security framework: Direct
and selective routed call security
H.323 security framework:
Framework for secure
authentication in RAS using weak
shared secrets
H.323 security framework: Voice
encryption profile with native
H.235/H.245 key management
H.323 security framework: Usage
of the MIKEY key management
protocol for the Secure Real Time
Transport Protocol (SRTP) within
H.235
H.323 security framework: Key
exchange for SRTP using secure
signalling channels
H.323 security framework: Security
gateway support for H.323
Gateway control protocol NAT
traversal for peer-to-peer services
Packet-based multimedia
communications system
Directory services architecture for
H.235
ITU-T
2012
ITU-T
2002
ITU-T
2002
ITU-T
2005
ITU-T
2005
ITU-T
2005
ITU-T
2005
ITU-T
2005
ITU-T
2005
ITU-T
2009
ITU-T
2005
ITU-T
2005
ITU-T
2005
ITU-T
2012
ITU-T
2009
ITU-T
2011
ITU-T H.233
ITU-T H.234
ITU-T H.235.0
ITU-T H.235.1
ITU-T H.235.2
ITU-T H.235.3
ITU-T H.235.4
ITU-T H.235.5
ITU-T H.235.6
ITU-T H.235.7
ITU-T H.235.8
ITU-T H.235.9
ITU-T H.248.84
ITU-T H.323
ITU-T H.350.2
107
ITU-T H.460.18
ITU-T H.460.19
ITU-T H.530
ITU-T H.751
ITU-T J.93
ITU-T J.96 Amd 1
ITU-T J.112
ITU-T J.160
ITU-T J.170
ITU-T J.191
ITU-T J.366.7
ITU-T J.366.9
ITU-T J.1002
ITU-T K.27
ITU-T K.31
Traversal of H.323 signalling across
network address translators and
firewalls
Traversal of H.323 media across
network address translators and
firewalls
Security for H.510 in H.323
Multimedia Mobile Environments
Metadata for rights information
interoperability in IPTV services
Requirements for conditional
access in the secondary delivery of
digital television or cable television
systems
Technical Method for Ensuring
Privacy in Long-Distance
International MPEG-2 Television
Transmission Conforming to Rec.
J.89
Transmission systems for
interactive cable television services
Architectural framework for the
delivery of time-critical services
over cable television networks
using cable modems
IPCablecom security specification
ITU-T
2013
ITU-T
2013
ITU-T
2002
ITU-T
2013
ITU-T
1998
ITU-T
1999
ITU-T
1998
ITU-T
2005
ITU-T
2005
IP feature package to enhance
cable modems
IPCablecom2 Access Security for IPbased Services
IPCablecom2 IP Multimedia
Subsystem (IMS): Generic
authentication architecture
specification
Pairing protocol specification for
renewable conditional access
system
Bonding Configurations and
Earthing Inside a
Telecommunication Building Protection Against Interference
Bonding Configurations and
Earthing of Telecommunication
Installations Inside a Subscriber's
Building - Protection Against
ITU-T
2004
ITU-T
2010
ITU-T
2006
ITU-T
2013
ITU-T
1996
ITU-T
1993
108
Interference
ITU-T K.51
ITU-T K.72
ITU-T K.87
ITU-T K.88
ITU-T L.11
ITU-T M.3010
ITU-T M.3016.0
ITU-T M.3016.1
ITU-T M.3016.1 Amd.1
ITU-T M.3016.2
ITU-T M.3016.3
ITU-T M.3016.3 Amd.1
ITU-T M.3016.4
ITU-T M.3016 Amd.1
Safety criteria for
telecommunication equipment
Protection of telecommunication
lines using metallic conductors
against lightning - Risk
management
Guide for the application of
electromagnetic security
requirements - Overview
EMC requirements for next
generation network equipment
ITU-T
2009
ITU-T
2011
ITU-T
2011
ITU-T
2011
Joint Use of Tunnels by Pipelines
and Telecommunication Cables,
and the Standardization of
Underground Duct Plans Construction, Installation and
Protection of Cable and Other
Elements of Outside Plant
Principles for a
telecommunications management
network
Security for the management
plane: Overview
Security for the management
plane: Security requirements
ITU-T
1988
ITU-T
2000
ITU-T
2005
ITU-T
2005
Security for the management
plane: Security requirements –
Amendment 1: Authentication
extension
Security for the management
plane: Security services
Security for the management
plane: Security mechanism
Security for the management
plane: Security mechanism Amendment1: Redundant
authentication extension
Security for the management
plane: Profile proforma
Security for the management
plane: Profile proforma –
Amendment 1: Authentication
extension
ITU-T
2011
ITU-T
2005
ITU-T
2005
ITU-T
2011
ITU-T
2005
ITU-T
2011
109
ITU-T M.3210.1
TMN management services for
IMT-2000 security management
(M.IMTSEC)
Management requirements
framework for the TMN X interface
TMN management functions
ITU-T
2001
ITU-T
1997
ITU-T
2000
Guidelines and requirements for
security management systems to
support telecommunications
management
Security Arrangements - General.
Basic Security Arrangements. Types
of Failure, Recognition of Failure
and Abnormal Error Rates Specifications of Signalling System
No. 6
Intervals at which security
measures are to be invoked
Security transformations
application service element for
remote operations service element
(STASE-ROSE)
Specification of a security module
for whole message protection
TMN PKI Digital certificates and
certificate revocation lists profiles
ITU-T
2008
ITU-T
1988
ITU-T
1988
ITU-T
1998
ITU-T
2000
ITU-T
2001
ITU-T Q.1531
UPT security requirements for
service Set 1
ITU-T
2000
ITU-T Q.1741.1
IMT-2000 references to release
1999 of GSM evolved UMTS core
network with UTRAN access
network
IMT-2000 references to release 4
of GSM evolved UMTS core
network with UTRAN access
network
IMT-2000 references to release 5
of GSM evolved UMTS core
network with UTRAN access
network
EAP-Based Security Signaling
Protocol Architecture for Network
Attachment
Procedures for document facsimile
transmission in the GSTN
ITU-T
2002
ITU-T
2002
ITU-T
2003
ITU-T
2007
ITU-T
2005
ITU-T M.3320
ITU-T M.3400
ITU-T M.3410
ITU-T Q.291
ITU-T Q.293
ITU-T Q.813
ITU-T Q.815
ITU-T Q.817
ITU-T Q.1741.2
ITU-T Q.1741.3
ITU-T Q.3201
ITU-T T.30
110
ITU-T T.36
Security capabilities for use with
Group 3 facsimile terminals
Network-specific data protocol
stacks for multimedia conferencing
Annex B: Extended Transport
Connections
A document application profile for
the interchange of Group 4
facsimile documents
Terminal Characteristics for Group
4 facsimile apparatus
Programming Communication
Interface (PCI) APPLI/COM for
Facsimile Group 3, Facsimile Group
4, Teletex, Telex, E-mail and file
transfer services
Information technology – JPEG
2000 image coding system Secure
JPEG 2000
Information technology Open
Systems Interconnection (OSI)
Service definition for the
association control service element
Data compression and privacy over
frame relay networks
Network layer security protocol
ITU-T
1997
ITU-T
2007
ITU-T
2000
ITU-T
1996
ITU-T
1994
ITU-T, ISO/IEC
2006
ITU-T, ISO/IEC
1995
ITU-T
2000
ITU-T, ISO/IEC
1994
Transport layer security protocol
ITU-T, ISO/IEC
1994
Message Handling Systems (MHS):
Overall architecture
Message Handling Systems (MHS) –
Protocol specifications
Message Handling Systems (MHS) –
Interpersonal messaging system
Message Handling Systems (MHS) –
Electronic data interchange
messaging system
Message Handling Systems (MHS) –
Voice messaging system
ITU-T, ISO/IEC
1999
ITU-T, ISO/IEC
1999
ITU-T, ISO/IEC
1999
ITU-T, ISO/IEC
1999
ITU-T
1999
ITU-T X.500 | ISO/IEC
9594-1
The Directory: Overview of
concepts, models and services
ITU-T, ISO/IEC
2012
ITU-T X.501 | ISO/IEC
9594-2
The Directory: Models
ITU-T, ISO/IEC
2012
ITU-T T.123
ITU-T T.503
ITU-T T.563
ITU-T T.611
ITU-T T.807
ITU-T X.217 | ISO/IEC
15953
ITU-T X.272
ITU-T X.273 | ISO/IEC
11577
ITU-T X.274 | ISO/IEC
10736
ITU-T X.402 | ISO/IEC
10021-2
ITU-T X.419 | ISO/IEC
10121-6
ITU-T X.420 | ISO/IEC
10121-7
ITU-T X.435 | ISO/IEC
10121-9
ITU-T X.440
111
ITU-T X.509 | ISO/IEC
9594-8
ITU-T X.519 | ISO/IEC
9594-5
ITU-T X.733 | ISO/IEC
10164-4
The Directory: Authentication
framework
The Directory: Protocol
specification
Information technology (IT) – Open
Systems Interconnection (OSI) –
Systems Management: Alarm
reporting function
Information technology (IT) – Open
Systems Interconnection (OSI) –
Systems Management: Log control
function
Information technology (IT) – Open
Systems Interconnection (OSI) –
Systems Management: Security
alarm reporting function
Information technology (IT) – Open
Systems Interconnection (OSI) –
Systems Management: Security
audit trail function
Information technology (IT) – Open
Systems Interconnection (OSI) –
Systems Management: Objects and
attributes for access control
Trouble management function for
ITU-T applications
ITU-T, ISO/IEC
2012
ITU-T, ISO/IEC
2012
ITU-T, ISO/IEC
1992
ITU-T, ISO/IEC
1992
ITU-T, ISO/IEC
1992
ITU-T, ISO/IEC
1992
ITU-T, ISO/IEC
1995
ITU-T
1995
ITU-T X.800 | ISO/IEC
7498-2
ITU-T X.802 | ISO/IEC
13594
Security architecture for Open
Systems Interconnection
Open Systems Interconnection –
Lower layers security model
ITU-T, ISO/IEC
1991
ITU-T, ISO/IEC
1995
ITU-T X.803 | ISO/IEC
10745
ITU-T X.805 | ISO/IEC
18028-2
Open Systems Interconnection –
Upper layers security model
Security architecture for systems
providing end-to-end
communications
Open Systems Interconnection –
Security frameworks for open
systems: Overview
Information Technology - Open
Systems Interconnection – Security
frameworks for open systems:
Authentication framework
Open Systems Interconnection –
Security frameworks for open
systems: Access control framework
ITU-T, ISO/IEC
1994
ITU-T, ISO/IEC
2003
ITU-T, ISO/IEC
1995
ITU-T, ISO/IEC
1995
ITU-T, ISO/IEC
1995
ITU-T X.735 | ISO/IEC
10164-6
ITU-T X.736 | ISO/IEC
10164-7
ITU-T X.740 | ISO/IEC
10164-8
ITU-T X.741 | ISO/IEC
10164-9
ITU-T X.790
ITU-T X.810 | ISO/IEC
10181-1
ITU-T X.811 | ISO/IEC
10181-2
ITU-T X.812 | ISO/IEC
10181-3
112
ITU-T X.813 | ISO/IEC
10181-4
ITU-T X.814 | ISO/IEC
10181-5
ITU-T X.815 | ISO/IEC
10181-6
ITU-T X.816 | ISO/IEC
10181-7
ITU-T X.830 | ISO/IEC
11586-1
ITU-T X.831 | ISO/IEC
11586-2
ITU-T X.832 | ISO/IEC
11586-3
ITU-T X.833 | ISO/IEC
11586-4
ITU-T X.834 | ISO/IEC
11586-5
ITU-T X.835 | ISO/IEC
11586-6
ITU-T X.841 | ISO/IEC
15816
ITU-T X.842 | ISO/IEC
14516
ITU-T X.843 | ISO/IEC
15945
ITU-T X.851
Open Systems Interconnection –
Security frameworks for open
systems: Non-repudiation
framework
Open Systems Interconnection –
Security frameworks for open
systems: Confidentiality framework
Open Systems Interconnection –
Security frameworks for open
systems: Integrity framework
Open Systems Interconnection –
Security frameworks for open
systems: Security Audit and Alarms
framework
Open Systems Interconnection –
Generic upper layers security
(GULS): Overview, models and
notation
Open Systems Interconnection –
GULS: Security Exchange Service
Element (SESE) service definition
Open Systems Interconnection –
GULS: Security Exchange Service
Element (SESE) protocol
specification
Open Systems Interconnection –
GULS: Protecting transfer syntax
specification
Open Systems Interconnection –
GULS: Security Exchange Service
Element (SESE) PICS proforma
Open Systems Interconnection –
GULS: Protecting transfer syntax
PICS proforma
Security techniques – Security
Information Objects for access
control
Guidelines for the use and
management of Trusted Third Party
services
Specification of TTP services to
support the application of digital
signatures
Information Technology - Open
Systems Interconnection - Service
Definition for the Commitment,
Concurrency and Recovery Service
ITU-T, ISO/IEC
1996
ITU-T, ISO/IEC
1995
ITU-T, ISO/IEC
1995
ITU-T, ISO/IEC
1995
ITU-T, ISO/IEC
1995
ITU-T, ISO/IEC
1995
ITU-T, ISO/IEC
1995
ITU-T, ISO/IEC
1995
ITU-T, ISO/IEC
1996
ITU-T, ISO/IEC
1996
ITU-T, ISO/IEC
2000
ITU-T, ISO/IEC
2000
ITU-T, ISO/IEC
2000
ITU-T
1997
113
ITU-T X.852
ITU-T X.853
ITU-T X.893
ITU-T X.1031
ITU-T X.1032
ITU-T X.1034
ITU-T X.1035
ITU-T X.1036
ITU-T X.1037
ITU-T X.1051
Element - Series X: Data Networks
and Open System Communication
OSI Applications - Commitment,
Concurrency and Recovery
Information Technology - Open
Systems Interconnection - Protocol
for the Commitment; Concurrency
and Recovery Service Element:
Protocol Specification - Series X:
Data Networks and Open System
Communication - OSI Applications Commitment, Concurrency and
Recovery
Information Technology - Open
Systems Interconnection - Protocol
for the Commitment, Concurrency
and Recovery Service Element:
Protocol Implementation
Conformance Statement (PICS)
Proforma - Data Networks and
Open System Communications OSI
Applications - Commitment,
Concurrency and Recovery
Fast infoset security
ITU-T
1997
ITU-T
1995
ITU-T
2007
Security architecture aspects of
end users and networks in
telecommunications
Architecture of external
interrelationships for a
telecommunication IP-based
network security system
Guideline on Extensible
Authentication Protocol based
Authentication and Key
Management in a Data
Communication Network
Password authenticated key
exchange protocol
ITU-T
2008
ITU-T
2010
ITU-T
2011
ITU-T
2007
Framework for creation, storage,
distribution and enforcement of
policies for network security
Technical security guideline on
deploying IPv6
Requirements for
Telecommunications of
Information Security Management
ITU-T
2007
ITU-T
2013
ITU-T
2008
114
System (T-ISMS)
ITU-T X.1052
ITU-T X.1054 | ISO/IEC
27014
ITU-T X.1055
ITU-T X.1056
ITU-T X.1057
ITU-T X.1081.1
ITU-T X.1081
ITU-T X.1082 | ISO/IEC
80000-14
ITU-T X.1083 | ISO/IEC
24708
ITU-T X.1084
ITU-T X.1086
ITU-T X.1088
ITU-T X.1089
ITU-T X.1090
ITU-T X.1091
Information security management
framework
Information technology – Security
techniques – Governance of
information security
Risk management and risk profile
guidelines for telecommunications
organizations
Security incident management
guidelines for telecommunications
organizations
Asset management guidelines in
telecommunication organizations
e-Health and world-wide
telemedicines - Generic
telecommunication protocol
The telebiometric multimodal
model – A framework for the
specification of security and safety
aspects of telebiometrics
Telebiometrics related to human
physiology
BioAPI interworking protocol
ITU-T
2011
ITU-T, ISO/IEC
2012
ITU-T
2008
ITU-T
2009
ITU-T
2011
ITU-T
2009
ITU-T
2011
ITU-T
2007
ITU-T
2007
Telebiometrics system mechanism
- General biometric authentication
protocol and profile on
telecommunication system
Telebiometrics protection
procedures - Part1: A guideline to
technical and managerial
countermeasures for biometric
data security
Telebiometrics system mechanism
- General biometric authentication
protocol and profile on
telecommunication system
Telebiometrics authentication
infrastructure
Authentication framework with
one-time telebiometric templates
A guideline for evaluating
telebiometric template protection
techniques
ITU-T
2008
ITU-T
2008
ITU-T
2008
ITU-T
2008
ITU-T
2011
ITU-T
2012
115
ITU-T X.1092
Integrated framework for
telebiometric data protection in ehealth and telemedicines
Security requirements and
framework for multicast
communication
Framework of security technologies
for home network
Device certificate profile for the
home network
Guideline on user authentication
mechanism for home network
services
Authorization framework for home
network
Framework of secure technologies
for mobile end-to-end data
communication
Guideline for implementing secure
mobile systems based on PKI
Differentiated security service for
secure mobile end-to-end data
communication
Authentication architecture for
mobile end-to-end communication
Correlative Reacting System in
Mobile Data Communication
ITU-T
2013
ITU-T
2010
ITU-T
2007
ITU-T
2007
ITU-T
2007
ITU-T
2008
ITU-T
2004
ITU-T
2004
ITU-T
2007
ITU-T
2007
ITU-T
2008
ITU-T X.1141
Security Assertion Markup
Language (SAML 2.0)
ITU-T
2006
ITU-T X.1142
eXtensible Access Control Markup
Language (XACML 2.0)
Security Architecture for message
security in mobile web services
eXtensible Access Control Markup
Language (XACML) 3.0
Guideline on secure passwordbased authentication protocol with
key exchange
Secure end-to-end data
communication techniques using
Trusted Third Party services
A management framework of an
one time password-based
authentication service
ITU-T
2006
ITU-T
2007
ITU-T
2013
ITU-T
2007
ITU-T
2008
ITU-T
2011
ITU-T X.1101
ITU-T X.1111
ITU-T X.1112
ITU-T X.1113
ITU-T X.1114
ITU-T X.1121
ITU-T X.1122
ITU-T X.1123
ITU-T X.1124
ITU-T X.1125
ITU-T X.1143
ITU-T X.1144
ITU-T X.1151
ITU-T X.1152
ITU-T X.1153
116
ITU-T X.1154
ITU-T X.1156
ITU-T X.1161
ITU-T X.1162
ITU-T X.1164
ITU-T X.1171
ITU-T X.1191
ITU-T X.1192
ITU-T X.1193
ITU-T X.1194
ITU-T X.1195
ITU-T X.1196
ITU-T X.1197
ITU-T X.1198
ITU-T X.1205
General framework of combined
authentication on multiple identity
service provider environments
Non-repudiation framework based
on a one time password
Framework for secure peer-to-peer
communications
Security architecture for peer-topeer network
Use of service providers’ user
authentication infrastructure to
implement public key
infrastructure for peer-to-peer
networks
Threats and requirements for
protection of personally
identifiable information in
applications using tag-based
identification
Functional requirements and
architecture for IPTV security
aspects
Functional requirements and
mechanisms for the secure
transcoding of IPTV
Key management framework for
secure internet protocol television
(IPTV) services
Algorithm selection scheme for
service and content protection
descrambling
Service and content protection
(SCP) interoperability scheme
ITU-T
2013
ITU-T
2013
ITU-T
2008
ITU-T
2008
ITU-T
2012
ITU-T
2009
ITU-T
2009
ITU-T
2011
ITU-T
2011
ITU-T
2012
ITU-T
2011
Framework for the downloadable
service and content protection
system in the mobile Internet
Protocol Television (IPTV)
environment
Guidelines on criteria for selecting
cryptographic algorithms for IPTV
service and content protection
Virtual machine-based security
platform for renewable IPTV
service and content protection
Overview of Cybersecurity
ITU-T
2012
ITU-T
2012
ITU-T
2013
ITU-T
2008
117
ITU-T X.1206
ITU-T X.1207
ITU-T X.1209
ITU-T X.1231
ITU-T X.1240
ITU-T X.1241
ITU-T X.1242
ITU-T X.1243
ITU-T X.1244
ITU-T X.1245
ITU-T X.1250
ITU-T X.1251
ITU-T X.1252
ITU-T X.1253
ITU-T X.1254
ITU-T X.1255
ITU-T X.1275
ITU-T X.1303
A vendor-neutral framework for
automatic notification of security
related information and
dissemination of updates
Guidelines for telecommunication
service providers for addressing the
risk of spyware and potentially
unwanted software
Capabilities and their context
scenarios for cybersecurity
information sharing and exchange
Technical strategies on countering
spam
ITU-T
2008
ITU-T
2008
ITU-T
2010
ITU-T
2008
Guideline on countering email
spam
Technical framework for
countering email spam
Short message service (SMS) spam
filtering system based on userspecified rules
Interactive gateway system for
countering spam
Overall aspects of IP multimedia
applications spam
Framework for countering spam in
IP-based multimedia applications
Baseline capabilities for enhanced
global identity management and
interoperability
A framework for user control of
digital identity
Baseline identity management
terms and definitions
Security guidelines for identity
management systems
Entity authentication assurance
framework
ITU-T
2008
ITU-T
2008
ITU-T
2009
ITU-T
2010
ITU-T
2008
ITU-T
2010
ITU-T
2009
ITU-T
2009
ITU-T
2010
ITU-T
2011
ITU-T
2012
Framework for discovery of identity ITU-T
management information
Guidelines on protection of
ITU-T
personally identifiable information
in the application of RFID
technology
Common alerting protocol
ITU-T
2013
2010
2007
118
ITU-T X.1311 | ISO/IEC
29180
ITU-T X.1312
Security framework for ubiquitous
sensor network
Ubiquitous sensor network (USN)
middleware security guidelines
Security requirements for wireless
sensor network routing
Overview of cybersecurity
information exchange
Procedures for the registration of
arcs under the object identifier arc
for cybersecurity information
exchange
Common vulnerabilities and
exposures
Common vulnerability scoring
system
Common weakness enumeration
ITU-T
2011
ITU-T
2011
ITU-T
2012
ITU-T
2011
ITU-T
2012
ITU-T
2011
ITU-T
2011
ITU-T
2012
Open vulnerability and assessment
language
Common platform enumeration
ITU-T
2013
ITU-T
2012
ITU-T X.1528.1
Common platform enumeration
naming
ITU-T
2012
ITU-T X.1528.2
Common platform enumeration
name matching
Common platform enumeration
dictionary
ITU-T
2012
ITU-T
2012
Common platform enumeration
applicability language
Incident object description
exchange format
Common attack pattern
enumeration and classification
Discovery mechanisms in the
exchange of cybersecurity
information
Real-time inter-network defence
ITU-T
2012
ITU-T
2012
ITU-T
2013
ITU-T
2011
ITU-T
2012
ITU-T X.1581
Transport of real-time internetwork defence messages
ITU-T
2012
X.sfcse
Security functional requirements
for Software as a Service (SaaS)
application environment
ITU-T
ITU-T X.1313
ITU-T X.1500
ITU-T X.1500.1
ITU-T X.1520
ITU-T X.1521
ITU-T X.1524
ITU-T X.1526
ITU-T X.1528
ITU-T X.1528.3
ITU-T X.1528.4
ITU-T X.1541
ITU-T X.1544
ITU-T X.1570
ITU-T X.1580
119
ITU-T X.Sup2
ITU-T X.Sup3
ITU-T X.Sup6
ITU-T X.Sup7
ITU-T X.Sup8
ITU-T X.Sup9
ITU-T X.Sup10
ITU-T X.Sup11
ITU-T X.Sup12
ITU-T X.Sup13
ITU-T X.Sup14
ITU-T X.Sup15
ITU-T X.Sup16
ITU-T X.Sup17
Security baseline for network
operators
Supplement on guidelines for
implementing system and network
security
Supplement on countering spam
and associated threats
Supplement on overview of
identity management in the
context of cybersecurity
ITU-T X.1205 – Supplement on best
practices against botnet threats
ITU-T X.1205 – Supplement on
guidelines for reducing malware in
ICT networks
ITU-T X.1205 - Supplement on
usability of network traceback
ITU-T
2007
ITU-T
2008
ITU-T
2009
ITU-T
2009
ITU-T
2010
ITU-T
2011
ITU-T
2011
ITU-T X.1245 - Supplement on
framework based on real-time
blocking lists for countering VoIP
spam
ITU-T X.1240 - Supplement on
overall aspects of countering
mobile messaging spam
ITU-T X.1051 - Supplement on
information security management
users' guide for Recommendation
ITU-T X.1051
ITU-T X.1243 - Supplement on a
practical reference model for
countering e-mail spam using
botnet information
ITU-T X.800-X.849 series Supplement on guidance for
creating a national IP-based public
network security centre for
developing countries
ITU-T X.800-X.849 series Supplement on architectural
systems for security controls for
preventing fraudulent activities in
public carrier networks
ITU-T X.1143 - Supplement on
threats and security objectives for
enhanced web-based
telecommunication services
ITU-T
2011
ITU-T
2012
ITU-T
2012
ITU-T
2012
ITU-T
2012
ITU-T
2012
ITU-T
2012
120
ITU-T X.Sup18
ITU-T X.Sup19
ITU-T X.Sup20
ITU-T Y.1271
ITU-T Y.1901
ITU-T Y.2171
ITU-T Y.2201
ITU-T Y.2614
ITU-T Y.2701
ITU-T Y.2702
ITU-T Y.2703
ITU-T Y.2704
ITU-T Y.2705
ITU-T Y.2720
ITU-T Y.2721
Supplement to ITU-T X-series
Recommendations
ITU-T X.1205 – Supplement on
guidelines for abnormal traffic
detection and control on IP-based
telecommunication networks
Supplement to ITU-T X-series
Recommendations
ITU-T X.1120 series – Supplement
on security aspects of smartphones
Supplement to ITU-T X-series
Recommendations
ITU-T X.1205 – Supplement on
framework of security information
sharing negotiation
Framework(s) on network
requirements and capabilities to
support emergency
telecommunications over evolving
circuit-switched and packetswitched networks
Requirements for the support of
IPTV services
Admission control priority levels in
Next Generation Networks
Requirements and capabilities for
ITU-T NGN
Network reliability in public
telecommunication data networks
Security requirements for NGN
release 1
ITU-T
2013
ITU-T
2013
ITU-T
2013
ITU-T
2004
ITU-T
2009
ITU-T
2006
ITU-T
2009
ITU-T
2011
ITU-T
2007
Authentication and authorization
requirements for NGN release 1
The application of AAA service in
NGN
Security mechanisms and
procedures for NGN
Minimum security requirements
for the interconnection of the
Emergency Telecommunications
Service (ETS)
NGN Identity management
framework
ITU-T
2008
ITU-T
2009
ITU-T
2010
ITU-T
2013
ITU-T
2009
NGN identity management
requirements and use cases
ITU-T
2010
121
ITU-T Y.2722
ITU-T Y.2723
ITU-T Y.2724
ITU-T Y.2740
ITU-T Y.2741
ITU-T Y.2760
ITU-T Y.2770
ITU-T Y.Sup12
ITU-T Y.Sup18
ITU-T Y.Sup19
TR99.00.01
TR99.00.02
STANAG 1276 ED 1 AMD
5
STANAG 1276 ED 1 AMD
6
STANAG 1276 ED 1 AMD
7
STANAG 1276 ED 1 AMD
8
NGN identity management
mechanisms
Support for OAuth in NGN
ITU-T
2011
ITU-T
2013
Framework for NGN support and
use of OpenID and OAuth
Security requirements for mobile
remote financial transactions in
next generation networks
Architecture of secure mobile
financial transactions in next
generation networks
Mobility security framework in
NGN
Requirements for deep packet
inspection in next generation
networks
ITU-T Y.2720 – Supplement on NGN
identity management mechanisms
ITU-T
2013
ITU-T
2011
ITU-T
2011
ITU-T
2011
ITU-T
2012
ITU-T
2010
ITU-T Y.2700-series - Supplement
on next generation network
certificate management
Y.2200 series Supplement on the
risk analysis service in next
generation networks
Security Technologies for
Manufacturing and Control
Systems
Integrating Electronic Security into
the Manufacturing and Control
Systems Environment
(Active/Historical)Shipborne
Helicopter Harpoon/Grid Rapid
Securing System
(Active/Historical)Shipborne
Helicopter Harpoon/Grid Rapid
Securing System
(Active/Historical)Shipborne
Helicopter Harpoon/Grid Rapid
Securing System Amendment 7,
3/20/95
Shipborne Helicopter Harpoon/Grid
Rapid Securing System Amendment
8: 09/29/1995
ITU-T
2012
ITU-T
2012
ISA
2004
ISA
2004
NATO
1989
NATO
1992
NATO
1995
NATO
1995
122
STANAG 3616 ED 3
STANAG 4245
STANAG 4291 ED 1 AMD
0
STANAG 4291 ED 1 AMD
1
(Active/Historical)Responsibility for
the Design and Provision of
Adaptors Necessary for the
Compatibility of Air Cargo Loading,
Securing, Unloading or Dropping
Systems in Fixed Wing Aircraft
(SECRET) Secure and ECM Resistant
HF Low Speed Digital Data
Communications System
(Active/Historical)Modulation and
Coding Characteristics That Must
Be Common to Assure
Interoperability of 2400 BPS
Wireline Modems for Use in
Narrow-Band Secure Voice Systems
Modulation and Coding
Characteristics That Must Be
Common to Assure Interoperability
of 2400 BPS Wireline Modems for
Use in Narrow-Band Secure Voice
Systems Amendment 1:
05/09/1990 R(1990)
NATO
2010
NATO
1987
NATO
1986
NATO
1986
Technical Report 48 Revised
Framework for Integration of
Electronic Document Management
Systems and Electronic Records
Management Systems
Encryption and Authentication
Securities and related financial
instruments - International
securities identification numbering
systems (ISIN)
Financial transaction card
originated messages - Interchange
message specifications - Part 3:
Maintenance procedures for
messages, data elements and code
values
Retail Financial Services - Merchant
Category Codes
AIIM
2006
ARINC
ASC X9
2002
2003
ASC X9
2003
ASC X9
2003
Public Key Cryptography Using
Irreversible Algorithms - Part 1: The
Digital Signature Algorithm (DSA)
ASC X9
1997
Regional and national
standards, guidelines and
regulations
ANSI/AIIM/ARMA TR48
ARINC 666 ITEM 7.0
ANSI X9.101
ANSI X9.105-3
ANSI X9.106
ANSI X9.30-1
123
ANSI X9.30-2
Public Key Cryptography Using
Irreversible Algorithms - Part 2: The
Secure Hash Algorithm (SHA-1)
ASC X9
1997
ANSI X9.42
Public Key Cryptography for the
Financial Services Industry:
Agreement of Symmetric Keys
Using Discrete Logarithm
Cryptography
Financial Institution Numbering
System (FINS)
Public Key Cryptography for the
Financial Services Industry, Key
Agreement and Key Transport
Using Elliptic Curve Cryptography
Financial Services Public Key
Infrastructure (PKI) Policy and
Practices Framework
Prime Number Generation,
Primality Testing, and Primality
Certificates
Banking - Personal Identification
Number Management and Security
- Part 1: PIN protection principles
and techniques for online PIN
verification in ATM & POS systems
Random Number Generation Part
1: Overview and Basic Principles
ASC X9
2003
ASC X9
ASC X9
1988. Reapproved in
2001
2001
ASC X9
2001
ASC X9
2005
ASC X9
2003
ASC X9
2006
Business Continuity Guideline - A
Practical Approach for Emergency
Preparedness, Crisis Management,
and Disaster Recovery
Threat Advisory System Response
Guideline
Standard Guide for Education and
Training in Computer Forensics
ASIS
2005
ASIS
2008
ASTM
2009
J-STD-025-B-2
Lawfully Authorized Electronic
Surveillance (LAES) - Addendum 2 Support for Carrier Identity, 2007
ATIS
BS 25999-1
Business continuity management.
Code of practice
BSI
2006
BS 25999-2
Business continuity management.
Specification
BSI
2007
16727
ANSI X12.58
Security Access System
Security Structures
CSI
DISA
1991
2004. Reapproved in
2008
ANSI X9.5
ANSI X9.63
ANSI X9.79
ANSI X9.80
ANSI X9.8-1
ANSI X9.82-1
ASIS BC GDL
ASIS TASR GDL
ASTM E2678
124
ECMA 219
TR 46
ANSI INCITS 149
ANSI/INCITS 426
C 5790
C 5869
C 5950
C 5959
C 5960
C 5961
X 1204-3
Authentication and Privilege
Attribute Security Application with
related key distribution functions Part 1: Overview and Functional
Model - Part 2: Security
Information Objects - Part 3:
Service Definitions 2nd Edition
SECURITY IN OPEN SYSTEMS A
SECURITY FRAMEWORK
ECMA
1996
ECMA
1988
Financial Transaction Card
Formsets - Location of Imprinted
Information (formerly ANSI X3.1491986 (R1997))
Fibre Channel - Security Protocols
Securities Identification Code
System
Information Processing Systems Open Systems Interconnection Basic Reference Model - Security
Architecture
Security Architecture of Financial
Transaction Systems Using
Integrated Circuit Cards-Part 1:
Card Life Cycle
Financial Transaction Cards Security Architecture of Financial
Transaction Systems Using
Integrated Circuit Cards - Part 3:
Cryptographic Key Relationships
Financial Transaction Card Security Architecture of Financial
Transaction Systems Using
Integrated Circuit Cards - Part 5:
Use of Algorithms
Financial Transaction Cards Security Architecture of Financial
Transaction Systems Using
Integrated Circuit Cards - Part 6:
Cardholder Verification
Information Technology - Security
Techniques - Entity Authentication
- Part 3: Mechanisms Using Digital
Signature Techniques
ITI (INCITS)
1986. Reapproved in
2007
ITI (INCITS)
KSA
2007
1993
KSA
1993
KSA
1995
KSA
1995
KSA
1995
KSA
1995
KSA
1999
125
DEF STAN 02-602
ANSI/NASPO SAv3.0P
800-14
ONORM EN 15602
ONORM EN 300175-7 V
2.1.1
DO-230A
AS 2805.13.1/Amdt 1
AS 2805.2/Amdt 1
AS 2805.2/Amdt 2
AS 2805.3.1
AS 5045
AS 5061
AS 61508.0
(Obsolescent)Guide to the
Installation of Thorn Security
Automatic Fire Detection Systems
Issue 1: 04/2000; Incorporating
NES 602 Issue 2 Publication Date
March 1991
Security Assurance Standards for
the Document & Product Security
Industry (Secured files - cannot be
printed)
Generally Accepted Principles and
Practices for Securing Information
Technology Systems
Security service providers Terminology
Digital Enhanced Cordless
Telecommunications (DECT) Common Interface (CI) - Part 7:
Security features
Standards for Airport Security
Access Control Systems
MODUK
2000
NASPO
2005
NIST
1996
ON
2008
ON
2007
RTCA
2003
Electronic funds transfer Requirements for interfaces Secure hash functions - General
Electronic funds transfer Requirements for interfaces Message structures, format and
content
Electronic funds transfer Requirements for interfaces Message structures, format and
content
Electronic funds transfer Requirements for interfaces - PIN
management and security General
Information technology - Security
techniques - Specification of TTP
services to support the application
of digital signatures
Interactive voice response systems
user interface - Speech recognition
SAI
2000. Amendment 1
2008
SAI
2007. Amendment 1
2008
SAI
2007. Amendment 2
2008
SAI
2008
SAI
2004. Reapproved in
2008
SAI
2008
Functional safety of
SAI
electrical/electronic/programmable
electronic safety-related systems Functional safety and AS 61508
2006
126
AS 8001
ANSI/SCTE 24-13
Fraud and corruption control
IPCablecom Part 13: Electronic
Surveillance Standard
SAI
SCTE
2008
2006
NZMP 6653
Information Systems Security
Standards Handbook
SNZ
2000
GB/Z 20985
Information technology-Security
techniques-Information security
incident management guide
SPC
2007
GB/Z 20986
Information security technologyGuidelines for the category and
classification of information
security incidents
Standard for Installation and
Classification of Closed Circuit
Video Equipment (CCVE) Systems
for Institutional and Commercial
Security Applications
Communications Security
(COMSEC) Anonymity Plan
SPC
2007
ULC
1996
US DoD
2008
Security Evaluation Document
(SED)
Information Security (INFOSEC)
Boundary Configuration
Management Plan
Traceability data
Interoperability and security
requirements for use of the data
encryption standard in the physical
layer of data communications
General security requirements for
equipment using the data
encryption standard
Network user id and password
procedures
System safety
US DoD
ULC-S317-96
DI-MGMT-81717C
DI-MISC-81762
DI-SESS-81343A
DI-SESS-81731
FED-STD-1026
FED-STD-1027
MIL-HDBK-804
MIL-STD-882D
US DoD
2008
US DoD
US DoD
2006
1983
US DoD
1982
US DoD
No date
US DoD
2000
3.3 Criminal threats
Document
Number
Title
Organization
Status
ISO
2008
ISO and ISO/IEC standards
ISO 19092
Financial services - Biometrics - Security
framework
127
ISO 9735-5
ISO 9735-6
ISO 12931
Electronic data interchange for
ISO
administration, commerce and transport
(EDIFACT) -- Application level syntax rules
(Syntax version number: 4, Syntax release
number: 1) -- Part 5: Security rules for batch
EDI (authenticity, integrity and nonrepudiation of origin)
Electronic data interchange for
ISO
administration, commerce and transport
(EDIFACT) -- Application level syntax rules
(Syntax version number: 4, Syntax release
number: 1) -- Part 6: Secure authentication
and acknowledgement message (message
type - AUTACK)
Performance criteria for authentication
ISO/IEC
solutions used to combat counterfeiting of
material goods
2002
2002
2012
ISO/AWI 18482
Security
Mangement System -- Guidance for use -Security risk assessment"
ISO/IEC
ISO/IEC 19784-1
Information technology - Biometric
application programming interface - Part 1:
BioAPI specification
ISO/IEC
2006
ISO/IEC 197841/Amd2
ISO/IEC 197841/Amd3
- Amendment 2: Framework-free BioAPI
ISO/IEC
2009
- Amendment 3: Support for interchange of
certificates and security assertions, and
other security aspects
ISO/IEC
2010
ISO/IEC 197841/FPDAmd3.2
Support for interchange of certificates and
security assertions, and other security
aspects
Information technology - Biometric
application programming interface - Part 2:
Biometric archive function provider
interface
Information technology - Common
Biometric Exchange Formats Framework Part 1: Data element specification
ISO/IEC
ISO/IEC 197851/Amd1
ISO/IEC 19785-2
ISO/IEC 19784-2
ISO/IEC 19785-1
ISO/IEC
2007
ISO/IEC
2006
- Amendment 1: Support for additional data
elements
ISO/IEC
2010
Information technology - Common
Biometric Exchange Formats Framework Part 2: Procedures for the operation of the
Biometric Registration Authority
ISO/IEC
2006
128
ISO/IEC 197852/Amd1
ISO/IEC 19785-3
- Amendment 1: Additional registrations
ISO/IEC
2010
Information technology - Common
Biometric Exchange Formats Framework Part 3: Patron format specifications
ISO/IEC
2010
ISO/IEC 197853/Amd1
- Amendment 1: Support for Additional
Data Elements
ISO/IEC
2010
ISO/IEC 19785-4
Information technology - Common
Biometric Exchange Formats Framework Part 4: Security block format specifications
ISO/IEC
2007
ISO/IEC 19792
Information technology - Security
techniques - Security evaluation of
biometrics
Information technology - Biometric data
interchange formats - Part 10: Hand
geometry silhouette data
ISO/IEC
2009
ISO/IEC
2007
ISO/IEC 19794-3
Information technology - Biometric data
interchange formats - Part 3: Finger pattern
spectral data
ISO/IEC
2006
ISO/IEC 19794-4
/Cor1
ISO/IEC 197944/Amd1
Corrigendum
ISO/IEC
- Amendment 1: Conformance testing
methodology and clarification of defects
ISO/IEC
Corrigendum 1
2011; 2005
Amendment 1
2013; 2011
ISO/IEC 197945/Amd1
- Amendment 1: Conditions for taking
photographs for face image data
ISO/IEC
Amendment 1
2007; 2005
ISO/IEC 197945/Amd2
- Amendment 2: Three-dimensional face
image data interchange format
ISO/IEC
Amendment 2
2009; 2005
ISO/IEC 197945/Cor1
ISO/IEC 197945/Cor2
ISO/IEC 19794-6
Corrigendum
ISO/IEC
Corrigendum
ISO/IEC
Corrigendum 1
2005; 2008
Corrigendum 2
2005; 2008
2011
ISO/IEC 19794-7
Information technology - Biometric data
interchange formats - Part 7: Signature/sign
time series data
ISO/IEC
2007
ISO/IEC 197947/Cor1
Information technology - Biometric data
interchange formats - Part 7: Signature/sign
time series data - Corrigendum 1
ISO/IEC
Corrigendum 1
2009
ISO/IEC 19794-8
This standard has been revised by: ISO/IEC
ISO/IEC
19794-8:2011<br>Information technology Biometric data interchange formats - Part 8:
Finger pattern skeletal data
ISO/IEC 19794-10
Information technology - Biometric data
ISO/IEC
interchange formats - Part 6: Iris image data
2006
129
ISO/IEC 19794-8
Information technology - Biometric data
interchange formats - Part 8: Finger pattern
skeletal data
ISO/IEC
2011
ISO/IEC 19794-9
Information technology - Biometric data
interchange formats - Part 9: Vascular
image data
Information technology - Biometric
performance testing and reporting - Part 1:
Principles and framework
ISO/IEC
2011
ISO/IEC
2006
ISO/IEC 19795-2
Information technology - Biometric
performance testing and reporting - Part 2:
Testing methodologies for technology and
scenario evaluation
ISO/IEC
2007
ISO/IEC 19795-4
Information technology - Biometric
performance testing and reporting - Part 4:
Interoperability performance testing
ISO/IEC
2008
ISO/IEC 19795-5
Information technology - Biometric
performance testing and reporting - Part 5:
Access control scenario and grading scheme
ISO/IEC
2011
ISO/IEC 19795-6
Information technology - Biometric
performance testing and reporting - Part 6:
Testing methodologies for operational
evaluation
Information technology - Biometric
performance testing and reporting - Part 7:
Testing of on-card biometric comparison
algorithms
Information technology - Biometrics BioAPI Interworking Protocol
ISO/IEC
2012
ISO/IEC
2011
ISO/IEC
2008
Information technology - Conformance
testing for the biometric application
programming interface (BioAPI) - Part 1:
Methods and procedures
Information technology - Conformance
testing for the biometric application
programming interface (BioAPI) - Part 2:
Test assertions for biometric service
providers
Information technology - Biometric profiles
for interoperability and data interchange Part 1: Overview of biometric systems and
biometric profiles
ISO/IEC
2007
ISO/IEC
2007
ISO/IEC
2008
ISO/IEC 19795-1
ISO/IEC 19795-7
ISO/IEC 24708
ISO/IEC 24709-1
ISO/IEC 24709-2
ISO/IEC 24713-1
130
ISO/IEC 24713-2
Information technology - Biometric profiles
for interoperability and data interchange Part 2: Physical access control for
employees at airports
Information technology - Biometric profiles
for interoperability and data interchange Part 3: Biometrics-based verification and
identification of seafarers
ISO/IEC
2008
ISO/IEC
2009
Information technology - Security
techniques - Authentication context for
biometrics
Information technology - Conformance
testing methodology for biometric data
interchange formats defined in ISO/IEC
19794 - Part 1: Generalized conformance
testing methodology
Information technology - Conformance
testing methodology for biometric data
interchange formats defined in ISO/IEC
19794 - Part 10: Hand geometry silhouette
data
Information technology - Conformance
testing methodology for biometric data
interchange formats defined in ISO/IEC
19794 - Part 2: Finger minutiae data
ISO/IEC
2009
ISO/IEC
2009
ISO/IEC
2010
ISO/IEC
2010
ISO/IEC 29109-4
Information technology - Conformance
testing methodology for biometric data
interchange formats defined in ISO/IEC
19794 - Part 4: Finger image data
ISO/IEC
2010
ISO/IEC 29109-5
Information technology - Conformance
testing methodology for biometric data
interchange formats defined in ISO/IEC
19794 - Part 5: Face image data
ISO/IEC
2012
ISO/IEC 29109-6
Information technology - Conformance
testing methodology for biometric data
interchange formats defined in ISO/IEC
19794 - Part 6: Iris image data
ISO/IEC
2011
ISO/IEC 29109-7
Information technology - Conformance
testing methodology for biometric data
interchange formats defined in ISO/IEC
19794 - Part 7: Signature/sign time series
data
ISO/IEC
2011
ISO/IEC 24713-3
ISO/IEC 24761
ISO/IEC 29109-1
ISO/IEC 29109-10
ISO/IEC 29109-2
131
ISO/IEC 29109-8
Information technology - Conformance
testing methodology for biometric data
interchange formats defined in ISO/IEC
19794 - Part 8: Finger pattern skeletal data
ISO/IEC
2011
ISO/IEC 29141
Information technology - Biometrics Tenprint capture using biometric
application programming interface (BioAPI)
ISO/IEC
2009
ISO/IEC 29164
Information technology - Biometrics Embedded BioAPI
ISO/IEC
2011
ISO/IEC 29794-1
Information technology - Biometric sample
quality - Part 1: Framework
ISO/IEC
2009
ISO/IEC FCD 197942
Information technology -- Biometric data
interchange formats -- Part 2: Finger
minutiae data
Information technology - Biometric
performance testing and reporting - Part 3:
Modality-specific testing
ISO/IEC
ISO/IEC
2007
Information technology - Biometrics Jurisdictional and societal considerations
for commercial applications - Part 1:
General guidance
Information technology - BiometricsMultimodal and other multibiometric
fusion
Information technology - Biometrics tutorial
Information technology - Biometric sample
quality - Part 4: Finger image data
ISO/IEC
2008
ISO/IEC
2007
ISO/IEC
ISO/IEC
2007
2010
Information technology - Biometric sample
quality - Part 5: Face image data
ISO/IEC
2010
ISO/IEC TR 19795-3
ISO/IEC TR 24714-1
ISO/IEC TR 24722
ISO/IEC TR 24741
ISO/IEC TR 29794-4
ISO/IEC TR 29794-5
Other Global Standards and Guidelines
9303 PART 1
Machine Readable Travel Documents - Part
1 Machine Readable Passports Fifth Edition
ICAO
2003
INCITS/ISO/IEC
19784-1
Information technology - Biometric
application programming interface - Part 1:
BioAPI specification
ITI (INCITS)
2007
INCITS/ISO/IEC
19784-2
Information technology - Biometric
application programming interface - Part 2:
Biometric archive function provider
interface
Information technology - Common
Biometric Exchange Formats Framework Part 1: Data element specification
ITI (INCITS)
2008
ITI (INCITS)
2008
INCITS/ISO/IEC
19785-1
132
INCITS/ISO/IEC
19785-2-20062008
Information technology - Common
Biometric Exchange Formats Framework Part 2: Procedures for the operation of the
Biometric Registration Authority
ITI (INCITS)
2008
INCITS/ISO/IEC
19785-3
Information technology - Common
Biometric Exchange Formats Framework Part 3: Patron format specifications
ITI (INCITS)
2008
INCITS/ISO/IEC
19794-1
Information technology - Biometric data
interchange formats - Part 1: Framework
ITI (INCITS)
2007
INCITS/ISO/IEC
19794-10
Information technology - Biometric data
interchange formats - Part 10: Hand
geometry silhouette data
ITI (INCITS)
2007.
Reapproved in
2012.
INCITS/ISO/IEC
19794-2
Information technology - Biometric data
interchange formats - Part 2: Finger
minutiae data
Information technology - Biometric data
interchange formats - Part 3: Finger pattern
spectral data
ITI (INCITS)
2007
ITI (INCITS)
2007
Information technology - Biometric data
ITI (INCITS)
interchange formats - Part 4: Finger image
data
Information technology - Biometric data
ITI (INCITS)
interchange formats - Part 5: Face image
data
Information technology - Biometric data
ITI (INCITS)
interchange formats - Part 6: Iris image data
2007
INCITS/ISO/IEC
19794-7
Information technology - Biometric data
interchange formats - Part 7: Signature/sign
time series data
ITI (INCITS)
2007
INCITS/ISO/IEC
19794-9
Information technology - Biometric data
interchange formats - Part 9: Vascular
image data
Information technology - Biometric
performance testing and reporting - Part 1:
Principles and framework
ITI (INCITS)
2007
ITI (INCITS)
2007
ITI (INCITS)
2002;
Reapproved
2007
INCITS/ISO/IEC
19794-3
INCITS/ISO/IEC
19794-4
INCITS/ISO/IEC
19794-5
INCITS/ISO/IEC
19794-6
INCITS/ISO/IEC
19795-1
2007
2007
Regional and national standards,
guidelines and regulations
ANSI INCITS 358
Information technology - BioAPI
Specification (Version 1.1) (formerly ANSI
INCITS 358-2002)
133
ANSI INCITS
358/AM1
Information technology - BioAPI
Specification (Version 1.1) - Amendment 1:
Support for Biometric Fusion
ITI (INCITS)
Amendment 1
2007; 2002
ANSI INCITS 383
Information Technology - Biometric Profile Interoperability and Data Interchange Biometrics Based Verification and
Identification of Transportation Workers
ITI (INCITS)
2008
ANSI INCITS 385
Information technology - Face Recognition
Format for Data Interchange
ITI (INCITS)
2004
ANSI INCITS 398
Information technology - Common
Biometric Exchange Formats Framework
(CBEFF)
American National Standard for
Information Technology - Biometric
Performance Testing and Reporting - Part 4:
Operational Testing Methodologies
ITI (INCITS)
2008
ITI (INCITS)
2006
American National Standard for
Information Technology - Biometric Profile Interoperability and Data Interchange - DoD
Implementations
Application Profile for Commercial
Biometrical Physical Access Control
ITI (INCITS)
2006
ITI (INCITS)
2007
Information technology - Conformance
Testing Methodology Standard for
Biometric Data Interchange Format
Standards - Part 1: Generalized
Conformance Testing Methodology
Information technology - Conformance
Testing Methodology Standard for
Biometric Data Interchange Format
Standards - Part 2: Conformance Testing
Methodology for INCITS 378-2004, Finger
Minutiae Format for Data Interchange
Information technology - Conformance
Testing Methodology for ANSI INCITS 3582002, BioAPI Specification
ITI (INCITS)
2008
ITI (INCITS)
2008
ITI (INCITS)
2008
ANSI INCITS 434
Information technology - Tenprint Capture
Using BioAPI
ITI (INCITS)
2007
ANSI INCITS 439
Information technology - Fusion
Information Format for Data Interchange
ITI (INCITS)
2008
ANSI/INCITS/ISO/IEC
19784-1/Amd.1
Information technology - Biometric
application programming interface - Part 1:
BioAPI specification, Amendment 1: BioGUI
specification
ITI (INCITS)
Amendment 1
ANSI INCITS 409.4
ANSI INCITS 421
ANSI INCITS 422
ANSI INCITS 423.1
ANSI INCITS 423.2
ANSI INCITS 429
134
INCITS 442
Information Technology - Biometric Identity
Assurance Services (BIAS)
ITI (INCITS)
2010
666 ITEM 7.0
ASTM E1873
Encryption and Authentication
Standard Guide for Detection of Nucleic
Acid Sequences by the Polymerase Chain
Reaction Technique
ARINC
ASTM
2006
ECMA-305
Private Integrated Services Network (PISN) Specification, Functional Model and
Information Flows - Wireless Terminal
Authentication Supplementary Services
(WTMAU-SD)
Entity Authentication Mechanism, (PART 1:
General Model)
ECMA
2000
KSA
1994
C 5954
Banking - Requirements for Message
Authentication (Wholesale)
KSA
1995
C 5955
Banking-Approved Algorithms for Message
Authentication - Part 1: DEA
KSA
1995
Title
ISO and ISO/IEC standards
Organization
Status
Geometrical product
specifications (GPS) - General
concepts and requirements for
GPS measuring equipment
Geographic information - Spatial
referencing by coordinates Part 2: Extension for parametric
values
Geographic information Metadata - Part 2: Extensions
for imagery and gridded data
Geographic information Location-based services Multimodal routing and
navigation
Geographic information Schema for moving features
ISO
2006
ISO
2009
ISO
2009
ISO
2007
ISO
2008
Geographic information Classification systems - Part 1:
Classification system structure
ISO
2009
C 5794
3.4 Natural Disasters
Document Number
ISO 14978
ISO 19111-2
ISO 19115-2
ISO 19134
ISO 19141
ISO 19144-1
135
ISO 6709
Standard representation of
geographic point location by
coordinates
Geographic information Imagery sensor models for
geopositioning
Geographic information -Spatial referencing by
geographic identifiers
Geographic information -- Web
map server interface
ISO
2008
ISO
2010
ISO
2005
ISO
2008
Geographic information Terminology
Geographic information Imagery sensor models for
geopositioning
- Amendment 3: Improvements
to geographic descriptor
ISO
2008
ISO
2010
ISO/IEC
Amendment 3
2008
- Amendment 4: Improvements
to geographic descriptor
conformance
ISO/IEC
Amendment 4
2008
American National Standard for
Information Technology Geographical Information
Systems - Spatial Data Standard
for Facilities, Infrastructure, and
Environment (SDSFIE)
Geographic information Profiles
Geographic information Methodology for feature
cataloguing
Geographic information - Spatial
referencing by coordinates
ITI (INCITS)
2006
ITI (INCITS)
2004
ITI (INCITS)
2005
ITI (INCITS)
2007
INCITS/ISO 19116
Geographic information Positioning services
ITI (INCITS)
2004
INCITS/ISO 19117
Geographic information ITI (INCITS)
Portrayal
Geographic information ITI (INCITS)
Services
Geographic information - Simple ITI (INCITS)
feature access - Part 1: Common
architecture
2005
ISO TS 19130
ISO 19112
ISO 19128
ISO/TS 19104
ISO/TS 19130
ISO/IEC 15938-5/Amd3
ISO/IEC 15938-7/Amd4
Other Global Standards and
Guidelines
ANSI INCITS 353
INCITS/ISO 19106
INCITS/ISO 19110
INCITS/ISO 19111
INCITS/ISO 19119
INCITS/ISO 19125-1
2005
2004
136
INCITS/ISO 19125-2
Geographic information - Simple ITI (INCITS)
feature access - Part 2: SQL
option
Geographic information ITI (INCITS)
Location-based services Multimodal routing and
navigation
Geographic information ITI (INCITS)
Schema for moving features
2004
INCITS/ISO 6709
Standard Representation of
Latitude, Longitude and Altitude
for Geographic Point Locations
(formerly ANSI/ISO 6709-1983)
ITI (INCITS)
2005
INCITS/ISO/IEC 19118
Geographic information Encoding
Geographic information Schema for coverage geometry
and functions
Geographic information Location-based services Tracking and navigation
Geographic information Procedures for item registration
ITI (INCITS)
2005
ITI (INCITS)
2005
ITI (INCITS)
2005
ITI (INCITS)
2005
Geographic information - Core
profile of the spatial schema
ITI (INCITS)
2007
ASPRS
1991
KSA
1992
INCITS/ISO 19134
INCITS/ISO 19141
INCITS/ISO/IEC 19123
INCITS/ISO/IEC 19133
INCITS/ISO/IEC 19135
INCITS/ISO/IEC 19137
2007
2008
Regional and national
standards, guidelines and
regulations
GIS-1
A 3703
Geographic Information
Systems: a Guide to the
Technology
Recommendation for Lighting of
Traffic Tunnels
3.4.1 Geological Hazard threats
3.4.2 Meteorological Hazard threats
137