FOR IMMEDIATE RELEASE:
Contact:
Jonathan Rider, Marketing CSR
D.I. Roof Seamers, a division of Developmental Industries, Inc.
1-888-343-0456
Fax 662-287-6744
[email protected]
www.diroofseamers.com
D.I. Roof Seamers proudly introduces the "Contractor Series" Roof Seamer.
Corinth, MS, February 22, 2010 — D.I. Roof Seamers proudly introduces the "Contractor Series"
Roof Seamer. Available for delivery after May 3, 2010, this machine is designed to reduce
capital investment for any contractor or builder who owns their own portable roll former.
This Roof Seamer has been designed to help contractors and builders who own their own
portable roll former. With competitive prices, these machines are equipped to provide a
builder with the ability to own their own Roof Seamer without a large capital investment.
Created to work with the most common standing seam panel profiles, this machine can be
ordered with two sets of optional tooling. Architectural style roof panels with a 1 1/2" or 2"
seam height and either a 1/2" or 3/4" unseamed female leg width can be formed into a 90: or
180: seamed profile.
Purchase prices for the "Contractor Series" Roof Seamers are as follows:
2-Station Single Direction 90: Roof Seamer
$2,499.99
3-Station Bi-Directional 90: Roof Seamer
$2,999.99
4-Station Single Direction 180: Roof Seamer
$3,199.99
The machine is self propelled with hands free operation. Built with a durable 9 amp/115
volt/60 cycle electric motor, it is equipped with a quick-disconnect plug for added safety and an
optional onboard hour meter to keep track of usage and maintenance. Recommended for use
with 24 gauge panels only. The machine is exceptionally lightweight and fast and comes with a
thirty day manufacturer's warranty. Extended warranties are available for purchase. All roof
seamers come with user-friendly owner's manuals in both English and Spanish for bilingual
installation crews.
The "Contractor Series" Roof Seamer may be ordered immediately, but will not be released for
delivery until Monday, May 3, 2010.
-more-
D.I. Roof Seamers proudly introduces... (page 2)
For additional information, Contact:
Jonathan Rider, Marketing CSR
D.I. Roof Seamers, a division of Developmental Industries, Inc.
(662) 287-6626 x304
(662) 287-6744
[email protected]
www.diroofseamers.com
Developmental Industries, Inc. was found in 1989 by two brothers, Terry and Ted Rider. The
Rider's quickly saw a need for the development of a machine to help contractors and builders
install standing seam metal roof safer and more efficiently. With the development of the first
Roof Seamer, the company grew to a full 60,000 sq. ft. CNC machining facility. Located in
Northeastern Mississippi, Developmental Industries, Inc. is now the largest CNC facility in the
region and is committed to sustaining America jobs and doing their part to rebuild the
economy. All machines, hand tools and other products offered by Developmental Industries,
Inc. are manufactured and assembled in our facility. D.I. Roof Seamers, the division of
Developmental Industries, Inc. that handles all Roof Seamer products and services, is proud to
offer many Roof Seamer rental and purchase options along with a full line of hand crimpers,
hand tools, roof removal tools and other accessories. More information can be found by
visiting www.diroofseamers.com.
###