Fastrax Sevice Guide
Upgrade Dome using HID2404SR
1. Run “FastraxFlash.exe” and Click “Scan Dome”.
and open new F/W data (xxx.mot) Click “Upload File”
RS-232 extension cable
HID2404SR
S1 S2 S4
S3
Dip switch setting for upgrade mode.
2. If upgrade is complete, press ENTER or MENU
key and go to the dome camera’s menu and
initialize data by executing factory default.
Fastrax Sevice Guide
3. Select Device “H8S/2633RF” and
Upgrade Dome using ISP B/D click “Next”.
6. Click “Next”.
RS-232 extension cable
POWER
AC 24V
ISP Board
1. Open Flash Development Toolkit
3.1 and click “OK”
2. Type Workspace Name and click “OK”
7. Click “Next”.
4.Enter “22.1184” at the CPU crystal
frequency and click “Next”.
5. Click “Next”.
8. Click right button of mouse on created
project file and click “Add file…”.
Fastrax Sevice Guide
Upgrade Dome using ISP B/D
9. Select new version software file and
Click “Add”.
10.Click right button of mouse on added
Target file and click “Download File”. The
unit should be power on and ISP B/D
switch should be on.
11. When upgrade is complete, you can see
below massage. Turn off the Dome and
unplug ISP B/D
12. If you turn the dome on after upgrade is
complete, you can see below massage.
13. Go to Factory default and move the
joystick to right direction to initialize EPROM.
Fastrax Sevice Guide
Upgrade K/B using j-box
RS-232 null modem cable
1. Set “ALARM/AUX : NONE” at KBD setting
2. When Turn on the KBD, CTRL + ESC key should be
pressed. You can see below screen on LCD screen.
4. Turn off and unplug upgrade cable and turn on the KBD . Press AUX1, AUX2,
AUX3, AUX4 and press ENTR when input password screen.
5. Go to Factory default and move the joystick to right direction to clear data.
F2A KEY FLASH MODE IS READY.
K/B ID=001
BLOCK =
3. Run “FastraxFlash.exe” and set “Dome Baudrate” to
“38400” and Click “Scan Dome”.
and open new F/W data(*.mot) and Click “Upload File”
•In case HID2404CLx,HID2404CZx,Upgrade can be possible later than F/W V2.0 &
H/W V1.3 . Before F/W V2.0 & H/W V1.3, Upgrade should be done by ISP B/D.
•In case HID2404CE,Upgrade can be possible both J-box and ISP B/D method
regardless both F/W version and H/W version.
RS-232 null modem cable
D-SUB TO D-SUB
FEMALE
FEMALE
2 -------- 3
3 -------- 2
5 -------- 5
D-SUB FEMALE
D-SUB FEMALE
5 4 3 2 1
5 4 3 2 1
9 8 7 6
9 8 7 6
Fastrax Sevice Guide
Upgrade K/B using ISP B/D
3. Select Device “H8S/2633RF” and
click “Next”.
6. Click “Next”.
RS-232 extension cable
1. Open Flash Development Toolkit
3.1 and click “OK”
2. Type Workspace Name and click “OK”
7. Click “Next”.
4.Enter “22.1184” at the CPU crystal
frequency and click “Next”.
5. Click “Next”.
8. Click right button of mouse on created
project file and click “Add file…”.
Fastrax Sevice Guide
Upgrade K/B using ISP B/D
9. Select new version software file and
Click “Add”.
10.Click right button of mouse on added
Target file and click “Download File”. The
unit should be power on.
11. When upgrade is complete, you can see
below massage. Turn off the K/B and
unplug ISP B/D
12. When upgrade is complete, turn off the
K/B and unplug ISP B/D and turn on the
K/D . Press AUX1, AUX2, AUX3, AUX4 and
press ENTR when input password screen
appear.
13. Go to Factory default and move the
joystick to right direction to clear all data.