Product Information
RCB 200
Generation of transients by relay switching
According Ford ES-XW7T-1A278-AC
Ford CI-220, pulses A1, A2, B1, B2, C
Ford CI-260 pulse F
This relay switching box has been designed by EM TEST to offer a high-quality solution for
customers testing according to the new Ford specification.
Three buttons permit to switch ON the unit, to select the right test pulse and test mode.
- TEST
allows to start and to stop the test
- PULSE
allows to select the pulse
- MODE
allows to select the mode for Pulse A1, A2, B1, B2
The LED’s confirm your choice and allow to check the setting.
The power supply (Battery voltage) is to connect on the inputs BAT
Additionally, for the pulse CI-260F, the VDS 200Bx has to be connected to the input VDS to
provide the required signal 1. Signal 2 is generated internally by the RCB
EM TEST AG
CH - 4153 Reinach BL
Tel:
email:
+41 61 717 91 91
[email protected]
Fax: +41 61 717 91 99
URL: www.emtest.com
rcb 200.doc
25.04.2005
St
1/2
Pulse A, B and C
EUT connection for Pulse A1, A2, B1,B2 and C
EUT connection for pulse F
Signal 2 being required for test pulse F is generated internally by the RCB
EM TEST AG
CH - 4153 Reinach BL
Tel:
email:
+41 61 717 91 91
[email protected]
Fax: +41 61 717 91 99
URL: www.emtest.com
rcb 200.doc
25.04.2005
St
2/2