Increase profits from important process
streams with accurate sampling.
Typical applications where head room
is a problem:
vertical pipe or chute
final tailings
flotation feed
cyclone overflow
4'-7 7/8" [1419]
23 1/8" [587]
3'-0 1/4" [920]
2'-0 3/4" [629]
TRAVEL
6" [152]
9 1/4" [235]
6” [152]
PROCESS
PIPE
CONNECTION
6" [152]
2'-3" [686]
PROCESS
PIPE CONNECTION
HANGER
CHUTE ADAPTER (ICE)
2'-5 1/8" [740]
1'-8" [508]
12" CUTTER
DRIP RING
RUBBER SEAL
Inspection Door
easy removal
full access for inspection
and maintenance
provides protection from
dust and moisture
3'-4 3/8" [1026]
10" [254] DIA.
DISCHARGE
1" DIA. SAMPLE
DISCHARGE
6" [152]
Vapor Seal
minimizes vapor and dust
from entering drive area
through underside of sampler
1'-1 5/16" [338]
1'-4 1/4" [412]
Cutters and Cutter Caps
designed to suit each application
ensures correct increment delimitation
and extraction
2" DIA. REJECT
cutter travel in various lengths up to
37 1/8 inches for 20” process pipe
connection (cutter travel 23 1/8”for 6”
process pipe connection shown above)
LDLE-4 Printed in Canada
1'-2 3/8" [365]
5'-9 7/8" [1775]
4'-11 7/8" [1521]
3'-1 1/8" [944]
TRAVEL
27 1/8" [690]
PROCESS
PROCESS
16"-20" SQUARE
OPENING
C/W FLANGE
24" SQUARE
OPENING
C/W FLANGE
10” NOMINAL
150# FLAT FACE FLANGE
PIPE CONNECTION
FLOW
PROCESS
MODEL LDLE
PRIMARY
SAMPLER
FLOW
4'-5 3/8" [1356]
FLOW
MODEL LDLE
PRIMARY
SAMPLER
FLOW
3'-11" [1194]
FLOW
PROCESS
TRAVEL
THRUST
RAIL
9'-0 7/8" [2765]
6'-6 1/2" [1994]
3'-2 1/2" [978]
DRIP RING
RUBBER SEAL
4'-11 7/8" [1520]
THRUST RAIL
DUST SEALS
14" NOMINAL
150# FLAT FACE FLANGE
PIPE CONNECTION
1'-11 1/8" [587]
3'-2" [965]
2'-0 3/4" [629]
PROCESS
2" DIA. SAMPLE
OUTLET
FLOW
PROCESS
SAMPLE
LAUNDER
4" DIA. SAMPLE
OUTLET
4'-0" [1219]
2'-2 3/8" [670]
2'-7 1/8" [791]
cutter travel in various lengths up to
maximum 37 1/8 inches for 20 inch
process pipe connection. (Cutter travel
27 1/8 inches for 10 inch process
pipe connection is shown above)
cutter
-various materials of construction
available depending on application
- 18 inch cutter shown (maximum 24”
for this application with this model)
process connections from 4” to 20”
(dimensions for nominal inlet 10” and 14”
outlet shown above with 150 lb flanges)
cutter travel available in various
lengths up to maximum 37 1/8”
various sizes of process chutes available
(16” to 20” retangular chute with 24”
outlet shown above)
standard electrical rating:
- 575v/3ph /60Hz (other ratings available)
motor:
- up to 3/4 hp, 0.55 kW (standard)
cutter
- various materials of construction
available depending on application
- 24 inch cutter shown (maximum
size for this application with this
model)
standard electrical rating:
- 575v/3ph/60Hz (other ratings available)
motor:
- up to 3/4 hp, 0.55 kW (standard)