Kverneland
Cultivator Mounted Seed Drill
e-drill compact and e-drill maxi
Product Information 2017
Kverneland e-drill compact & maxi
cultivator mounted seed drill
e-drill - Overview
•
Hopper design and capacity
•
ELDOS – new metering device
•
Electronic: e-com and e-bas driven
•
Fan drive
•
Coulter bar
•
Track marker
•
Loading steps and platform
•
Lighting
•
Pre-emergency marker
•
Technical data
•
Main advantages
e-drill hopper
•
Hopper is mounted on the frame of
the three point linkage
•
e-drill compact
1.100l
•
e-drill maxi
1.600l
e-drill hopper
•
Extremely close center of gravity,
benchmark in the market
•
To be combined with H-series power
harrow or NGS 101 power harrow
with Euro connection packer
e-drill hopper
•
Lateral position of metering device
for best possible access (patented
position)
•
Serial low level sensor with
adjustable level from outside
•
Unique overview on coulters
e-drill hopper
•
•
•
•
Hopper cover steel made
Gas-loaded cylinder for opening
More than 90° hopper opening
Bump protection
•
Sieve to protect against debris
e-drill maxi with
hopper extension
volume: 2000L
e-drill compact with
hopper extension
volume: 1400L
e-drill maxi
volume: 1600L
e-drill compact
volume: 1100L
Pneumatic Seed Distribution System
1
The metering unit
conveys the seeds
to the injector
where it is mixed
with the air stream
2
The air blows
the seeds
trough the
diffuser tube
3
The seeds are
distributed
equally to all
seeding
coulters
4
5
Adjustable
seed rate from
1 to 400kg/ha*
* depending on working
speed and width.
All kind of
seeds can
be sown
from grass
up to maize.
ELDOS – Electric driven metering device
•
Electric driven Kverneland metering device
•
Seed rate from 1-400kg per ha*, max. 32kg/min
•
*depending on working speed and width.
•
Calibration flap with integrated gate – no seed dropping into the hose.
•
Penstock as standard.
•
Remote control for calibration test at the metering device.
•
Emptying flap
e-drill – Optional equipment
• Optional rotor no 5
• Relevant for:
• Maize
• Sunflowers
• Greening seeds
e-drill– Lateral Position of the Metering Device
The patented lateral position of the
metering device ensures safe and
ergonomic access for calibration. This
also facilitates easy emptying and
cleaning of the hopper.
Advantages:
• Easy access
• Simple seed rate adjustment
• Fast hopper emptying
e-drill – Standard Accessories
Tool Box
User friendly positioned the spare rotors and scales
and calibration kit are
always ready to hand and
stored well-protected
against dust in a tool box
located near the metering
device.
Calibration Kit
Calibration kit (scale and
bag) is delivered as
standard equipment
e-drill – Seed drill control systems
e-bas
Focus 3
With electric ELDOS e-bas metering device drive. Not ISOBUS compatible
e- com
IsoMatch Tellus Go
IsoMatch Tellus
With electric ELDOS e-com metering device drive ISOBUS (ISO 11783)
e-drill – Focus 3
• Focus 3 replaces the former FGS
tramlining system and Signus
seed control.
• e-bas system
• Control of all basic electronic
functions e.g. hopper low level
control, various tramlining
systems, hectare information,
km/h, fan speed, including the
control of the ELDOS metering
device.
• Full diagnostic function for testing
machine sensors and outputs.
• Not ISOBUS compatible
• No support of GPS signals or
applications.
e-drill – IsoMatch Tellus
The next generation universal ISOBUS
Terminal – IsoMatch Tellus
• Two ISOBUS interfaces in one terminal
• Multifunctional ergonomic design
• ISOBUS Shortcut Button (ICB)
The IsoMatch Tellus is the first ISOBUS terminal in
the world with the capability to operate different
machines on 2 screens by 1 terminal, without the
need to constantly toggle between screens.
e-drill – IsoMatch Tellus GO
• Multifunctional one-screen terminal
with touch screen
• Fast and simple control of any
ISOBUS implement
• Application includes manual
guidance, section control and variable
rate
• Display of working speed, fan
revolution and active tramlining
• Metering device control, electric seed
rate adjustment
• Hopper low level sensor
• Hectare counter (3 different types)
• Diagnostic and storage system
e-drill speed signal
•
•
•
Speed measurement via radar (serial
equipment)
Placed at the rear part of the
machine
Optionally possible without radar if
the tractor signal can be used
e-drill calibration
•
•
•
•
•
•
Easy calibration process
Choose the type of seed kg/ha or
corns/m² and forward speed
Start the rotor filling directly at the
metering device
Start the calibration process
Measure the weight
Store the weight in the electronic
data
e-drill track marker arm
•
•
•
•
•
For visible tracks during sowing
Optional equipment
Mounted on the power harrow frame
Hydraulically steered
Overload protection
e-drill fan drive
•
•
•
Hydraulically driven fan drive (series
equipment)
Maximum 28 l/min oil requirement
Housing made of antistatic material
e-drill solo operation
•
•
•
Quick dismounting of the coulter bar
via Euro-Connection
For solo operation of the power
harrow
Optional track marker arms remain
on the power harrow
e-drill Euro-Connection
•
•
•
•
•
Easy to handle Euro-Connection
Connects the seed bed preparation
implement with the coulter bar
Stiff design
Well-known front loader couple
system
Secured by two screws
e-drill loading step
•
•
•
•
•
Series mounted loading step
With railing for safe access
Antislip ground
Wide platform
Foldable stairs
e-drill lighting
•
Working lights on the seeder for
work during night
•
LED lighting inside the hopper
e-drill distribution head
•
•
•
•
Mounted outside the hopper
For perfect access from the loading
steps
Cover fixed by screws
Optional with shut-off valves
e-drill camera system
•
•
•
•
IM eye camera
Optional equipment
To be combined with e-com software
For optimum overview behind the
hopper
e-drill coulter pressure adjustment
•
•
•
•
Central coulter pressure
adjustement
Equipped with crank (optionally
hydraulic adjustment available)
With visible scale from tractor
cabine
Continuously adjustable
e-drill sowing depth adjustment
•
•
•
Central sowing depth adjustment
Toolless change of the sowing depth
in 3mm steps
Additional lifting of coulterbar
integrated to work w/o coulterbar
e.g. on headlands
e-drill CX-II coulter
•
Large dimensioned casted iron
coulter arm with high professional
bearings well-proven
•
Maintenance-free no greasing points
due to long life bearing protection
•
•
•
•
•
Coulter pressure: up to 35 kg
Disc cutting angle: 5,4 °
Steel disc: Ø 325 mm x 3mm
Flex disc: Ø 250 mm
Series press wheel: Ø 250 mm x 42
mm
Row staggering: 445 mm
Depth adjustment: by bolt
•
•
CX-II coulter – keeping the sowing depth
CX-II disc with flexible press wheel setting
Sowing depth okay
sowing depth okay s
owing depth too deep
sowing depth okay
Flexible press wheel: Leaving only one time the requested sowing depth when facing obstacles in the field.
Parallelogramm linked disc coulter with rigid press wheel
Sowing depth okay
sowing depth too high
sowing depth too deep
sowing depth okay
Rigid press wheel: Leaving two times the requested sowing depth when facing obstacles in the field due to rigid
connection between disc and press wheel
e-drill: CX-II coulter press wheel adjustments
•
•
•
•
•
Press wheel in fixed
position
For smooth conditions
Plain and even seed bed
No stones
Not many residues
•
•
•
•
•
Press wheel in flexible
position
For rough conditions
Rough seed bed
Stones on the field
Many residues
•
•
•
Press wheel in lifted
position
For extremely wet
conditions
e.g. in late autumn after
sugar beet harvest
e-drill following harrow
•
•
•
•
•
10 mm S tine harrow
Angle adjustable
Height and pressure toolless
adjustable via crank
A scale shows the setting
Can be lifted to work without
e-drill transport equipment
•
•
•
•
Road lighting equipment
Warning panels
Fitted on following harrow
Strong version to avoid bendings
e-drill pre emergency marker
•
•
•
•
•
Pre-emergency marker for visible
crop care tracks before seed
emergence
Optional equipment
Two single mounted discs
Hydraulic activated at tramline track
Foldable for street transport or
hopper loading
e-drill 4m road transport
•
•
Complying with national road
regulations, the machine can be
loaded on a trailer to be transprted
into field
Harrow can be folded in to stay
within allowed width
e-drill– Technical data
Model
e-drill compact and maxi
e-drill compact hopper capacity (l)
1100 (with extension 1400),
e-drill maxi hopper capacity (l)
1600 ( with extension 2000)
Folding hopper cover
Standard
Hydraulic fan drive max. 28 l/min
Standard
Hydr. Folding track marker
Option
Radar for speed signal
Standard
Seed rate 1-400kg/ha
Standard
10 mm S-type following harrow
Option
Half-width shut-off
Option
Electronic e-bas
Standard
Electronic e-com
Option
Pre-emergence marker
Option
CX-II coulter incl. Press wheel with double elntry
Standard
Weight (kg)
850-1260
Working width (m)
No. of coulters depending on coulter type
3.0 / 3.5/ 4.0
24; 28; 32
e-drill – Main advantages
• Integrated seed drill solution
• Closest centre of gravity
• Perfect overview by the hopper side
• CX-II coulters with press wheels series
• 10mm following harrow
• Overload protected track marker as standard
• Optional pre-emergence marker
• Different control systems available  from simple e-bas up to full ISOBUS
compatible e-com software
• Hydraulic fan drive with low oil consumption
• Lighting equipment as standard
visit us at www.kvernelandgroup.com
The Future of Farming
www.kverneland.com
See our
Machines
at work
on YouTube