WYRESTORM PRODUCT SPECIFICATION SHEET
WyreStorm Low Profile 4K HDBaseT 5-Play
Extender Set with 2-Way IR, RS232, POH & Ethernet
(4K: 70m/230ft - 1080p: 100m/328ft)
EX-70-4K
Key Features:
•
•
•
Extender set capable of HDMI transmission using single cable Cat5e/6 cable under recommended conditions:
- 70m/230ft: 4K video up to 4096 x 2160@30Hz / 24bit True Color with full chroma subsampling color palette 4K@30Hz 4:4:4
or 4K@60Hz 4:2:0
- 100m/328ft: 1920x1080p HD video@60Hz / 48bit Deep Color
Bidirectional PoH (Power over HDBaseT) allows transmitter to power receiver or receiver to power the transmitter – mains
power supply only required to one device
Robust Class A HDBaseT technology for stable transmission resistant to electrostatic and environmental interference
compared to conventional UTP distribution
Ultra slim, Ultra High Definition 4K compatible HDBaseT Class A extender set with 5-Play feature support for HD/
UHD video, HD audio, Ethernet, bidirectional PoH and two-way control via IR & RS232 over a single Cat5e/6 cable
up to 70m/20ft (4K) or 100m/328ft (HD). Including enhanced EDID and unit setting management, five-level LED signal
indication and additional power connectivity, the EX-70-4K offers the integrator the best yet in flexible, reliable and
powerful digital content distribution over distance.
Additional Features & Benefits:
•
•
•
•
•
Supports all HD resolutions and 4K (UHD & DCI) resolutions
with screen refresh rate support of 24Hz, 30Hz (4K: 4:4:4)
50Hz, 60Hz (1080p & 4K: 4:2:0)
Full 3D compatibility up to 1080p - frame packing/ sequential
(Blu-Ray) and interlaced stereoscopic (satellite/cable
broadcasts)
5Play compliance - distribution of video (4K UHD & 1080p
HD), multichannel HD audio, two-way IR, and 10/100
Ethernet over single Cat5e/6
Multichannel audio supports 7.1 DTS Master HD and Dolby
True HD
Transmits discrete wide-band bidirectional IR control and
serial commands together within the HDMI signal over a
single Cat5e/6
•
•
•
•
•
•
•
•
Adjustable EDID management for preset, stored or recalled
settings to negotiate communication between connected
source/display devices
Switchable RS232 port for control or firmware update
Phoenix port for additional power connection
Visual 5-stage LED indication for power supply to units,
signal status to show established display connection, HDCP
presence in signal and strength of transmission
HDMI V1.4
HDCP 2.2 compliant
Low profile chassis of 18mm/0.7” for easier, more convenient
installations behind screens at display zones
Automatically adjusts feedback, equalization and
amplification of signal for easy installation
in the box
1 x TX-70-4K Transmitter
1 x RX-70-4K Receiver
2 x 12V/1.5A DC power supplies
2 x 3.5mm Phoenix male connectors (2 pin)
2 x 3.5mm Phoenix male connectors (3 pin)
2 x Wide-band IR TX emitters
2 x Wide-band IR RX receivers (30-50KHz)
2 x Pairs of EX-70-4K mounting brackets
1 x Printed Quickstart guide*
*Quickstart and full manual downloadable from product page at wyrestorm.com
US OFFICE:
EMEA OFFICE: TEL: +1 518-289-1293
TEL: + 44 (0) 1793 230 343
WYRESTORM PRODUCT SPECIFICATION SHEET
Specifications
Dimensions (WxHxD)
232mm x 18mm x 93mm / 13” x 0.71” x 3.67” (depth excludes connectors)
WeightTransmitter: 0.52kg/1.15lbs
Receiver: 0.50kg/1.1lbs
InputTransmitter: 1 x HDMI
Input Signal Type
Input Resolution Support
Receiver: 1 x HDBaseT
Transmitter: HDMI 1.4a with 4K
Receiver: HDBaseT
480i, 576i, 480p, 576p, 720p, 1080i, 1080p @ up to 60Hz
3840 x 2160 @ 30Hz 4:4:4, 4096 x 2160 @ 30Hz 4:4:4, 4K @ 60Hz YUV 4:2:0
Input Video Level
0.5~1.2V Vp-p
Input DDC Signal
5 volts p-p (TTL)
OutputTransmitter: 1 x HDBaseT OUT
Output Signal Type Transmitter: HDBaseT
Receiver: 1 x HDMI OUT
Receiver: HDMI 1.4a with 4K
Output Resolution Support
480i, 576i, 480p, 576p, 720p, 1080i, 1080p @ up to 60Hz
3840 x 2160 @ 30Hz 4:4:4, 4096 x 2160 @ 30Hz 4:4:4, 4K @ 60Hz YUV 4:2:0
Video Impedance
100Ω
Maximum Pixel Clock
297MHz
Audio
Multichannel digital audio supporting 7.1 DTS Master HD and Dolby True HD
3D
Frame packing/sequential (Blu-ray), Interlaced stereoscopic (satellite/cable broadcasts)
Operating Temperature
32°F to 95°F (0°C to 35°C) 10% to 90%, non-condensing
Storage Temperature
-4°F to 140°F (-20°C to 70°C) 10% to 90%, non-condensing
Power Supply
12v 2A DC
Power Consumption
≤16W (Pair)
ESD Protection
±8 kV (Air-gap discharge) ±4 kV (Contact discharge)
Surge Protection
Voltage: ±1 kV (Ten times respectively positive/negative voltage)
Electrical Fast Transient/Burst
Data communication cord: 2 kV Power cord : 2 kV
DISPLAY OUTPUT
SOURCE DEVICE
NOTE: Source device MUST be 4K to
transmit and receive 4K at a 4K display.
Wifi Router
Mains
power*
ethernet
cable
hdmi
ir tx
cable
SErial
Control
/ Firmware
update
NOTE: Although WyreStorm products
are tested with Cat5e, we recommend
Cat6 due to increased bandwidth and
improved capacity for handling large
transmissions along a single cable.
ir rx
cable
Cab-ir-link
(optional)
ir tx cable
hdmi
COntrol
System
Mains
power*
Cat5e/6 4K: 70m / 1080p: 100m
SErial Control
/ Firmware update
2-WAY
* Local power only required to one unit - PoH function powers unit at other location
For additional product information visit wyrestorm.com
For technical support contact: North America: +1 1-844-280-WYRE (9973)
EMEA/ROW: +44 (0) 1793 230 343
0615