Catalogue One-Shot Double Moulds Knobel 450 x 425 mm
OS-0066.151
OS-0289.104
OS-1201
"Standing egg with lines, 45 x 28 mm, approx. 20
grs"
144 cavities (12 x 12), 24 magnets, mould size: 450 x
425 mm
(thermoformed double mould suitable for a
Knobel one-shot machine)
"Ball with flat bottom, 25,3 mm, approx. 10 grs"
144 cavities, 24 magnets, mould size: 450 x 425 mm
(injected double mould)
"Smooth ball, 26 mm"
144 cavities (12 x 12), 24 magnets, mould size: 450 x
425 mm
(thermoformed double mould, suitable for a
Knobel one-shot machine)
OS-0066.152
OS-0289.105
OS-1202
"Standing egg with lines, 41 x 25,5 mm, approx. 15
grs"
144 cavities, with 24 magnets, mould size: 450 x 425
mm
(thermoformed double form)
"Star, 36 mm"
144 cavities, 28 magnets, mould size: 450 x 425 mm
(injected double mould)
"Ball with rough surface, 25 mm"
144 cavities (12 x 12), 24 magnets, mould size: 450 x
425 mm
(thermoformed double mould, suitable for a
Knobel one-shot machine)
OS-0085.223
OS-0289.106
OS-1202-KL
"Ball, rough surface, 24 x 24 x 12"
144 cavities, with 28 magnets, mould size: 450 x 425
mm,
(thermoformed polycarbonate double mould)
"Big star, 48 mm"
64 cavities, 28 magnets, moud size: 450 x 425 mm
(injected double mould)
"Ball with rough surface, 25 mm"
144 cavities (12 x 12), 24 magnets, mould size: 450 x
425 mm
(thermoformed double mould, both mould halves
made of clear material)
OS-0099.145
OS-0302.101
OS-1203
"Ball with lines, 27 mm"
144 cavities (12 x 12), 24 magnets, mould size: 450 x
425 mm
(thermoformed double mould suitable for a knobel
one-shot machine)
"Cube with rounded edges, 27,5 mm, diameter of
filling hole: 14 mm, approx. 11,5 grs"
144 cavities, 28 magnets, mould size: 450 x 425
mm"
(thermoformed double mould)
"Smooth ball, diameter: 34 mm"
100 cavities, 24 magnets, mould size: 450 x 425 mm
(thermoformed double mould)
OS-0099.146
OS-0302.101-A
OS-1204
"Ball with lines, 25,6 mm, approx. 10 grs"
144 cavities, 24 magnets, mould size: 450 x 425
mm
(thermoformed double mould)
"Cube with rounded edges, 27,5 mm, diameter of
filling hole: 14 mm, approx. 11,5 grs"
144 cavities, 38 magnets, mould size: 450 x 425
mm"
(thermoformed double mould)
"Ball, smooth style, 25,6 mm, approx. 10,3 grs"
144 cavities (12 x 12), 24 magnets, mould size: 450 x
425 mm
(thermoformed double mould, suitable for a
knobel one-shot machine)
OS-0254.101
OS-0369.101
OS-1204-S
"Egg with lines, standing, smooth, 35 x 35 x 49 mm,
approx. 40 grs"
100 cavities (10 x 10), 24 magnets, mould size: 450 x
425 mm
(injected double mould)
"OS-Egg with lines, 26 x 19,5 mm, diameter of filling
hole: 11 mm"
144 cavities, 28 magnets, mould size: 450 x 425 mm
(thermoformed double mould)
"Ball smooth, 25,6 mm"
144 cavities (12 x 12), 24 magnets, mould size: 450 x
425 mm
(injected double mould)
Hans Brunner GmbH; Hans-Brunner-Str. 1; D-85625 Glonn /Germany; Phone: +49 (0) 8093/9086-0; Fax: +49 (0) 8093/5473; E-Mail: [email protected]; Internet: www.hansbrunner.de
1/2
Catalogue One-Shot Double Moulds Knobel 450 x 425 mm
OS-1205
OS-1216
"Ball, smooth, 24 mm"
144 cavities (12 x 12), 24 magnets, mould size: 450 x
425 mm
(thermoformed double mould, suitable for a
Knobel CCM 12/24 one-shot machine)
"Standing egg with lines, 36 x 24 mm"
144 cavities, 28 magnets, mould size: 450 x 425 mm
(thermoformed double mould)
OS-1206
OS-1281
"Standing egg, smooth style, 34 x 24 mm, approx.
12,5 grs"
144 cavities, 24 magnets, mould size: 450 x 425 mm
(thermoformed double mould, suitable for a
knobel one-shot machine)
"Round praline with flower, 25,6 mm"
144 cavities, 24 magnets, mould size: 450 x 425 mm
(injected mould half, suitable for upper mould half
OS-1204-S)
OS-1208
"Ball with lines, 27,5 mm"
144 cavities, 24 magnets, mould size: 450 x 425 mm
(thermoformed double mould, suitable for a
Knobel one-shot-machine)
OS-1210
"Ball with rough surface, 20 mm"
144 cavities (12 x 12), 24 magnets, mould size: 450 x
425 mm
(thermoformed double mould)
OS-1214
"Standing egg, rough surface, 40 x 26 mm"
144 cavities (12 x 12), 24 magnets, mould size 450 x
425 mm
(injected double mould)
OS-1215
"Ball, mat surface, 25,3 mm"
144 cavities (12 x 12), 24 magnets, mould size: 450 x
425 mm
(injected double mould, suitable for a Knobel
one-shot line)
Hans Brunner GmbH; Hans-Brunner-Str. 1; D-85625 Glonn /Germany; Phone: +49 (0) 8093/9086-0; Fax: +49 (0) 8093/5473; E-Mail: [email protected]; Internet: www.hansbrunner.de
2/2