Directional valves ► Pneumatically operated
Series CD12
Brochure
2
Directional valves ► Pneumatically operated
Series CD12
3/2-directional valve, Series CD12
► Qn = 4000 l/min ► pipe connection ► compressed air connection output: G 1/2
► suitable for ATEX
3
3/2-directional valve, Series CD12
► Qn = 4000 l/min ► pipe connection ► compressed air connection output: M22x1,5
► suitable for ATEX
5
5/2-directional valve, Series CD12
► Qn = 4100 l/min ► pipe connection ► compressed air connection output: G 1/2
► suitable for ATEX
7
5/2-directional valve, Series CD12
► Qn = 4100 l/min ► pipe connection ► compressed air connection output: M22x1,5
► suitable for ATEX
10
5/3-directional valve, Series CD12
► Qn = 3600 - 4100 l/min ► pipe connection ► compressed air connection output: G 1/2
► suitable for ATEX
13
Silencers, Series SI1
► Sintered bronze
15
Silencers, Series SI1
► Polyethylene
15
Silencers, Series SI1
► Sintered bronze
16
Silencers, Series SI1
► Sintered bronze
17
Accessories Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
3
Directional valves ► Pneumatically operated
3/2-directional valve, Series CD12
► Qn = 4000 l/min ► pipe connection ► compressed air connection output: G 1/2 ► suitable for ATEX
Version
Spool valve, zero overlap
Sealing principle
Soft sealing
Working pressure min./max.
-0.95 bar / 16 bar
Control pressure
min./max.
2 bar / 10 bar
Ambient temperature min./max.
-25°C / +70°C
Medium temperature min./max.
-25°C / +70°C
Medium
Compressed air
Max. particle size
50 µm
Oil content of compressed air
0 mg/m³ - 1 mg/m³
Materials:
00134160
Housing
Aluminum; Polyamide, fiber-glass reinforced
Seals
Acrylonitrile Butadiene Rubber; Polyurethane
Technical Remarks
■ The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
Compressed air connection
Input
NO/NC
G 1/2
Output
G 1/2
Exhaust
G 1/2
Pilot control
exhaust
G 1/8
Flow rate
value
Weight
[l/min]
[kg]
4000
0.71
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
Part No.
5711100300
4
Directional valves ► Pneumatically operated
3/2-directional valve, Series CD12
► Qn = 4000 l/min ► pipe connection ► compressed air connection output: G 1/2 ► suitable for ATEX
Dimensions
1)
G1/8-ISO 228/1
8
9
18
G1/8-ISO 228/1
2)
32
2
70 ±0,2
142,3
1
[3]
135
57
41
8,8
18
12[10]
1,5
G
1
[3]
44
13,5
10[12]
52 ±0,2
4,5
4,5
(G1/8)
68
74
10
12
14
40
D571_015
1) Port 12/10
2) vent port of piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
5
Directional valves ► Pneumatically operated
3/2-directional valve, Series CD12
► Qn = 4000 l/min ► pipe connection ► compressed air connection output: M22x1,5 ► suitable for ATEX
Version
Spool valve, zero overlap
Sealing principle
Soft sealing
Working pressure min./max.
-0.95 bar / 16 bar
Control pressure
min./max.
2 bar / 10 bar
Ambient temperature min./max.
-25°C / +70°C
Medium temperature min./max.
-25°C / +70°C
Medium
Compressed air
Max. particle size
50 µm
Oil content of compressed air
0 mg/m³ - 1 mg/m³
Materials:
00134160
Housing
Aluminum; Polyamide, fiber-glass reinforced
Seals
Acrylonitrile Butadiene Rubber; Polyurethane
Technical Remarks
■ The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
Compressed air connection
Input
NO/NC
M22x1,5
Output
M22x1,5
Exhaust
M22x1,5
Pilot control
exhaust
G 1/8
Flow rate
value
Weight
[l/min]
[kg]
4000
0.71
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
Part No.
5711100200
6
Directional valves ► Pneumatically operated
3/2-directional valve, Series CD12
► Qn = 4000 l/min ► pipe connection ► compressed air connection output: M22x1,5 ► suitable for ATEX
Dimensions
1)
G1/8-ISO 228/1
8
9
18
G1/8-ISO 228/1
2)
32
2
70 ±0,2
142,3
1
[3]
135
57
41
8,8
18
12[10]
1,5
G
1
[3]
44
13,5
10[12]
52 ±0,2
4,5
4,5
(G1/8)
68
74
10
12
14
40
D571_015
1) Port 12/10
2) vent port of piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
7
Directional valves ► Pneumatically operated
5/2-directional valve, Series CD12
► Qn = 4100 l/min ► pipe connection ► compressed air connection output: G 1/2 ► suitable for ATEX
Version
Spool valve, zero overlap
Sealing principle
Soft sealing
Working pressure min./max.
-0.95 bar / 16 bar
Control pressure
min./max.
2 bar / 10 bar
Ambient temperature min./max.
See table below
Medium temperature min./max.
See table below
Medium
Compressed air
Max. particle size
50 µm
Oil content of compressed air
0 mg/m³ - 1 mg/m³
Materials:
00134161
Housing
Aluminum; Polyamide, fiber-glass reinforced
Seals
Acrylonitrile Butadiene Rubber; Polyurethane
Technical Remarks
■ The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
Compressed air connection
Input
Output
Exhaust
Pilot
control
exhaust
Flow rate Ambient temvalue
perature
min./max.
1▶2
[l/min]
[°C]
Medium temperature
min./max.
[°C]
Fig.
Part No.
[kg]
G 1/2
G 1/2
G 1/2
G 1/8
4100
- -25°C / +70°C
-25°C / +70°C
0.86
Fig. 2
5711000100
G 1/2
G 1/2
G 1/2
G 1/8
4100
- -15°C / +70°C
-15°C / +70°C
0.86
Fig. 1
5711000300
G 1/2
G 1/2
G 1/2
G 1/8
4100
4100 -25°C / +70°C
-25°C / +70°C
0.86
Fig. 2
5711001100
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
8
Directional valves ► Pneumatically operated
5/2-directional valve, Series CD12
► Qn = 4100 l/min ► pipe connection ► compressed air connection output: G 1/2 ► suitable for ATEX
Fig. 1, Single air pilot
9
18
8
7,3
G1/8-ISO 228/1
G1/8-ISO 228/1
14
73
59
1,5
41,5
13,5
172,3
4
2
30
78
1
32
30
5
44
27,5
8,8
3
12
4,5
52
4,5
74
40
68
14
12
10
(G1/8)
D571_100
1) Port 14
2) Vent port of piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
9
Directional valves ► Pneumatically operated
5/2-directional valve, Series CD12
► Qn = 4100 l/min ► pipe connection ► compressed air connection output: G 1/2 ► suitable for ATEX
Fig. 2, double air pilot
G1/8-ISO 228/1
7,3
1)
9
18
3)
14
73
59
41,5
13,5
3)
36,5
12
60,4
8,8
2
30
78 ±0,2
32
1
188,6
174
4
30
5
52±0,2
2)
4,5
4,5
74
40
68
14
12
(G1/8)
D571_099
1) Port 14
2) Port 12
3) Port without function
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
10
Directional valves ► Pneumatically operated
5/2-directional valve, Series CD12
► Qn = 4100 l/min ► pipe connection ► compressed air connection output: M22x1,5 ► suitable for ATEX
Version
Spool valve, zero overlap
Sealing principle
Soft sealing
Working pressure min./max.
-0.95 bar / 16 bar
Control pressure
min./max.
2 bar / 10 bar
Ambient temperature min./max.
See table below
Medium temperature min./max.
See table below
Medium
Compressed air
Max. particle size
50 µm
Oil content of compressed air
0 mg/m³ - 1 mg/m³
Materials:
00134161
Housing
Aluminum; Polyamide, fiber-glass reinforced
Seals
Acrylonitrile Butadiene Rubber; Polyurethane
Technical Remarks
■ The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
Compressed air connection
Input
Output Exhaust
Pilot
control
exhaust
Flow
rate
value
Ambient temperature
min./max.
Medium temperature
min./max.
Weight
[l/min]
[°C]
[°C]
[kg]
Fig.
Part No.
M22x1,5
M22x1,5
M22x1,5
G 1/8
4100 -25°C / +70°C
-25°C / +70°C
0.86
Fig. 2
5711000000
M22x1,5
M22x1,5
M22x1,5
G 1/8
4100 -15°C / +70°C
-15°C / +70°C
0.86
Fig. 1
R412013343
M22x1,5
M22x1,5
M22x1,5
G 1/8
4100 -25°C / +70°C
-25°C / +70°C
0.86
Fig. 2
R412013344
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
11
Directional valves ► Pneumatically operated
5/2-directional valve, Series CD12
► Qn = 4100 l/min ► pipe connection ► compressed air connection output: M22x1,5 ► suitable for ATEX
Fig. 1, Single air pilot
9
18
8
7,3
G1/8-ISO 228/1
G1/8-ISO 228/1
14
73
59
1,5
41,5
13,5
172,3
4
2
30
78
1
32
30
5
44
27,5
8,8
3
12
4,5
52
4,5
74
40
68
14
12
10
(G1/8)
D571_100
1) Port 14
2) Vent port of piston
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
12
Directional valves ► Pneumatically operated
5/2-directional valve, Series CD12
► Qn = 4100 l/min ► pipe connection ► compressed air connection output: M22x1,5 ► suitable for ATEX
Fig. 2, double air pilot
G1/8-ISO 228/1
7,3
1)
9
18
3)
14
73
59
41,5
13,5
3)
36,5
12
52±0,2
2)
60,4
8,8
2
30
78 ±0,2
32
1
188,6
174
4
30
5
4,5
4,5
74
40
68
14
12
(G1/8)
D571_099
1) Port 14
2) Port 12
3) Port without function
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
13
Directional valves ► Pneumatically operated
5/3-directional valve, Series CD12
► Qn = 3600 - 4100 l/min ► pipe connection ► compressed air connection output: G 1/2 ► suitable for ATEX
Version
Spool valve, zero overlap
Sealing principle
Soft sealing
Working pressure min./max.
-0.95 bar / 16 bar
Control pressure
min./max.
3 bar / 10 bar
Ambient temperature min./max.
-25°C / +70°C
Medium temperature min./max.
-25°C / +70°C
Medium
Compressed air
Max. particle size
50 µm
Oil content of compressed air
0 mg/m³ - 1 mg/m³
Compressed air connection
according to ISO 228-1
00134162
Materials:
Housing
Aluminum; Polyamide, fiber-glass reinforced
Seals
Acrylonitrile Butadiene Rubber; Polyurethane
Technical Remarks
■ The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result!
■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C.
■ The oil content of compressed air must remain constant during the life cycle.
■ Use only the approved oils from AVENTICS, see chapter „Technical information“.
Compressed air connection
Input
Output
Exhaust
Flow rate value
Pilot control
exhaust
1▶2
Weight
Part No.
2▶3
[l/min]
[kg]
G 1/2
G 1/2
G 1/2
G 1/8
3800
3800
0.95
5711200050
G 1/2
G 1/2
G 1/2
G 1/8
3600
4100
0.95
5711200060
G 1/2
G 1/2
G 1/2
G 1/8
4100
3800
0.95
R414002380
Nominal flow Qn at 6 bar and Δp = 1 bar
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
14
Directional valves ► Pneumatically operated
5/3-directional valve, Series CD12
► Qn = 3600 - 4100 l/min ► pipe connection ► compressed air connection output: G 1/2 ► suitable for ATEX
Dimensions
G1/8-ISO 228/1
7,3
1)
9
18
3)
14
73
59
41,5
13,5
3)
36,5
12
52±0,2
2)
60,4
8,8
2
30
78 ±0,2
32
1
188,6
174
4
30
5
4,5
4,5
74
40
68
14
12
(G1/8)
D571_099
1) Port 14
2) Port 12
3) Port without function
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
15
Directional valves ► Pneumatically operated
Series CD12
Accessories
Silencers, Series SI1
► Sintered bronze
Working pressure min./max.
0 bar / 10 bar
Ambient temperature min./max.
-25°C / +80°C
Medium
Compressed air
Materials:
Silencers
Sintered bronze
Thread
Brass
P100_060
Compressed air connection
Sound pressure level
Qn
Order quantity
Weight
G 1/2
[dB]
90
[l/min]
[piece]
[kg]
7100
2
0.08
Dimensions
D100_061
Part No.
Port G
1827000003
G 1/2
SW
ØD
27
14.5
L1
44
L2
12
Sound pressure level measured at 6 bar at 1 m distance
Silencers, Series SI1
► Polyethylene
Working pressure min./max.
0 bar / 10 bar
Ambient temperature min./max.
-25°C / +80°C
Medium
Compressed air
Materials:
P100_064
Silencers
Polyethylene
Thread
Polyethylene
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
Part No.
1827000003
16
Directional valves ► Pneumatically operated
Series CD12
Accessories
Compressed air connection
Sound pressure level
Qn
Order quantity
G 1/2
[dB]
88
[l/min]
[piece]
7000
1
Weight
Part No.
[kg]
0.013
1827000022
Weight
Part No.
Dimensions
D100_065
Part No.
Port G
G 1/2
1827000022
ØD
L1
23.3
66.5
L2
11
Sound pressure level measured at 6 bar at 1 m distance
Silencers, Series SI1
► Sintered bronze
Working pressure min./max.
0 bar / 10 bar
Ambient temperature min./max.
-25°C / +80°C
Medium
Compressed air
Materials:
P100_037
Silencers
Sintered bronze
Thread
Brass
Compressed air connection
Sound pressure level
Qn
Order quantity
G 1/2
[dB]
85
[l/min]
[piece]
2000
2
[kg]
0.035
1827000035
Dimensions
00119505
Part No.
1827000035
Port G
G 1/2
L1
12
L2
19.5
SW
27
Sound pressure level measured at 6 bar at 1 m distance
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
17
Directional valves ► Pneumatically operated
Series CD12
Accessories
Silencers, Series SI1
► Sintered bronze
Working pressure min./max.
0 bar / 10 bar
Ambient temperature min./max.
-25°C / +80°C
Medium
Compressed air
Materials:
Silencers
Sintered bronze
Thread
Brass
00128791
Compressed air connection
Order quantity
[piece]
G 1/2
2
Dimensions
L
H
ØD1
ØD
G
00129904
Part No.
R412007876
Port G
G 1/2
ØD
15
Ø D1
12
H
5
L
9
Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information
Pneumatics catalog, online PDF, as of 2016-07-26, ©AVENTICS S.à r.l., subject to change
Part No.
R412007876
AVENTICS GmbH
Ulmer Straße 4
30880 Laatzen, GERMANY
Phone +49 511 2136-0
Fax +49 511 2136-269
www.aventics.com
[email protected]
Find more contact information at
www.aventics.com/contact
Only use the AVENTICS products
shown in industrial applications.
Read the product documentation
completely and carefully before using
the product.
Observe the applicable regulations
and laws of the respective country.
When integrating the product into
applications, note the system
manufacturer’s specifications for safe
use of the product.
The data specified only serve to
describe the product.
No statements concerning a certain
condition or suitability for a certain
application can be derived from our
information.
The information given does not
release the user from the obligation
of own judgment and verification.
It must be remembered that the
products are subject to a natural
process of wear and aging.
26-07-2016
An example configuration is depicted on the title page. The delivered product may thus vary from that in the
illustration. Subject to change. © AVENTICS S.à r.l.
This document, as well as the data, specifications and other information set forth in it, are the exclusive property of
AVENTICS S.à r.l.. It may not be reproduced or given to third parties without its consent. PDF online