IMAGE CONTACT SHEET
High-resolution images available on USB drive.
Photos courtesy of Solvay.
1. Ultaire™ AKP Removable Partial Denture Frame
Image File Name: Ultaire AKP Frame
Removable partial denture frames made from Ultaire™ AKP offer
a biocompatible, lightweight, metal-free, non-irritating and more
aesthetically pleasing alternative to traditional metal RPD frames.
2. Ultaire™ AKP Removable Partial Denture
Frame Without Teeth
Image File Name: Ultaire AKP Frame Without Teeth
Removable partial denture frames made from Ultaire™ AKP offer
a biocompatible, lightweight, metal-free, non-irritating and more
aesthetically pleasing alternative to traditional metal RPD frames.
3. Ultaire™ AKP Frame and Metal Frame
Image File Name: Ultaire AKP and Metal Frame
On the left: a removable partial denture frame made from
Ultaire™ AKP, and on the right, a metal removable partial
denture frame.
IMAGE CONTACT SHEET
High-resolution images available on USB drive.
Photos courtesy of Solvay.
4. Milled Dentivera™ Milling Disc
Image File Name: Milled Dentivera Milling Disc
A Dentivera™ milling disc made from Ultaire™ AKP illustrating
three milled removable partial denture frames.
5. Dentivera™ Milling Disc Made
from Ultaire™ AKP
Image File Name: Dentivera Milling Disc
The Dentivera™ milling disc made from Ultaire™ AKP is developed
for milling removable partial dentures and is biocompatible,
monomer- (MMA), BPA- and nickel-free. Ultaire™ AKP’s base
materials are currently used in permanent implants and
non-implantable orthopedic, cardiovascular and renal devices.
6. Ultaire™ AKP Frame Held by Lab Technician
Image File Name: Frame Held by Lab Tech
This image shows a dental lab technician holding an Ultaire™ AKP
removable partial denture frame.
IMAGE CONTACT SHEET
High-resolution images available on USB drive.
Photos courtesy of Solvay.
7. Ultaire™ AKP Workflow Comparison
Workflow Comparison
Metal
Take
Impression
Take
Impression
Scan to
Digital* and
Input Data
Ultaire™
Pour
Model
Design
Frame
Pour
Model
Design
Frame
Block Out,
Relief,
Refractory
Cast
Wax
Frame
Invest
Framework
Burn Out
Framework
Cast
No Waxing and No Casting
Devest
Framework
Fit and
Finish
Frame
Polish
Frame
Mill/Cut
Out of Disc
Fit and
Finish
Frame
Polish
Frame*
Image File Name: Workflow Comparison Graphic
The Ultaire™ AKP workflow increases lab efficiency by eliminating
waxing, investing and casting procedures and reduces finishing
and polishing time compared to metal.
AKP
* These steps are taken only if needed
Patient Advantages
8. Ultaire™ AKP Patient Advantages
Image File Name: Patient Advantages Graphic
Removable partial denture frames made from Ultaire™ AKP are
tooth-supported, lightweight, biocompatible, leave no metal
taste in the mouth and offer improved aesthetics versus metal.
Lightweight,
biocompatible
Taste-free:
No metallic or
change in
food taste
Pleasing
aesthetics
Bone-like and
tooth-supported:
May minimize
bone loss
Digital
Workflow
No in-house
waxing or casting
necessary
Approximately
1-hour time-savings
per case*
9. Ultaire™ AKP Digital Workflow Time Savings
Image File Name: Time Savings Graphic
Dentivera™ milling discs made from Ultaire™ AKP are suitable
for use in CAD/CAM digital workflows. Incorporating the digital
workflow into business operations eliminates the waxing and
casting steps of metal frames and provides approximately
one hour in time savings per case, increasing productivity and
ultimately profitability for dental labs.
*Calculated based on lab time saved with removal of waxing and casting steps. Data on file.
Solvay Dental 360™, a division of Solvay Specialty Polymers USA, LLC. All trademarks and registered trademarks
are property of the companies that comprise the Solvay Group or their respective owners. © 2017, Solvay Specialty
Polymers. All rights reserved. DN201700099 v1.0 EN