x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x2 x2 x4 x4 x4 x2 x2 x4 x4 x4 x2 x2 x4

Model
Number
KIT III
KIT IV
KIT V
KIT VI
KIT VII
416.00 €
x1
x1
x1
x1
x1
7.20 €
x1
x1
x1
x1
x1
13.20 €
x2
x2
x4
x4
x4
20.40 €
x2
x2
x4
x4
x4
10.80 €
x2
x2
x4
x4
x4
9.60 €
x2
x2
x4
x4
x4
Specification
VP Cena
DSO 3064
4 Chanell 60MHz USB oscilloscope
PP80
Oscilloscope probe 1:10 60Mhz
Auto Test Cable
HT30A
Auto High-Pressure Ignition Probe
HT25
20:1 Attenuator
HT201
Large Dolphin/Gator Clip
HT18A
Break Out Leads
HT301
6-Way Universal Breakout Leads
HT306
When used please note:
(1), test clips shall not directly clip in spark plug, should be caught in the
connection of the spark plugs of insulation wire, in order to prevent the
breakdown and causing a shock.
(2), to distance other high-voltage at least 2 inches apart, lest produce
interference.
(3), HT25 leading line length 2 meters 5, the decay of up to 10,000:1.
Contents:
1pc X Red Probe
1pc X Black Probe
12.00 €
The breakout leads are available with 4 different sizes of connectors: 0.6
mm, 1.5 mm, 2.3 mm and 2.8 mm. This price is for one size only.
21.60 €
Picture
Acupuncture Probe Set
HT307
8.40 €
Coil-on-Plug Extension Cord (with earth cord)
HT308
20.40 €
BNC to 4 mm Adapter
HT311
4.80 €
Probe
HT322
4.80 €
Multimeter Probe
HT19
The multimeter probes offer a quick and easy solution, where a
permanent connection is not required. The 4 mm socket in the handle of
the probe connects straight into the HT30A auto test cable.
Length: 131 mm ,Diameter: 10 mm,Contents:1pc X Red Probe
1pc X Black Probe
The DC Power Adapter will charge your scope while you're repair or
maintain the car - just plug your scope with this adapter and then into any
standard car cigarette plug-in.
Input: 12-24VDC
Output: 9V----2000mA
x2
9.60 €
7.20 €
Auto Power Adapter
HT310
Current Clamp
CC-65
100A
108.00 €
Current Clamp
CC-650
1000A
132.00 €
LAN PCB
HT312
WiFi PCB
HT313
Please note our standard DSO3064 oscilloscope is without LAN and WIFI port. If
you choose LAN or WIFI option, the port should be bulit in the device during
production.
WIFI must be with LAN macthing use, i.e. WIFI cannot work independently
without LAN support.
If you choose WIFI PCB HT313 option, actually DSO3064 should be installed
WIFI and LAN port at the same time.
If you choose LAN PCB HT312, there's just a LAN port be built in.
x1
x1
x1
x1
x1
x2
x4
x4
x4
x2
x4
x4
x4
x1
x1
x1
x1
x1
x1
x1
48.00 €
144.00 €
Kit VP cena:
553 eur 580 eur 679 eur 767 eur
873 eur