Internet Access
zSH> bridge add 1-a-4-0/eth uplink vlan 35 tagged
Adding bridge on 1-a-4-0/eth
Created bridge-interface-record ethernet4-35/bridge
Bridge-path added successfully
Video Access
zSH> bridge add 1-a-4-0/eth uplink vlan 41 tagged igmpproxy
Adding bridge on 1-a-4-0/eth
Created bridge-interface-record ethernet4-41/bridge
Bridge-path added successfully
zSH> bridge-path modify ethernet4-41/bridge vlan 41 default multicast 250 igmpsnooping enable
igmptimer 100
Bridge-path ethernet4-41/bridge/3/41/0/0/0/0/0/0/0 has been modified
Add ONTs
By specifying an internal ME profile name using the command onu set OnuInterface
meprof InternalMEProfileName the MXK defines the interfaces for that ONU
zSH> onu set 6/1/1 meprof zhone-2426
zSH> onu set 6/1/2 meprof zhone-2426
Auto upgrading an ONU
Download the ONU sw to the MXK.
zSH> file download 192.168.1.16 ZNID24xxSIP_0300522_image_with_cfe.bin ZNID24xxSIP_300522.bin
Bytes copied: 10720672
File download successful
Where IP 192.168.1.16 is the tFTP server IP address
Create an auto-upgrade template
zSH> new remote-sw-upgrade-profile 2426
remote-sw-upgrade-profile 2426
Please provide the following: [q]uit.
enabled: ---> {true}:
model: -----> {}: 2426
swVersion: -> {}: S3.0.522
filename: --> {}: znid24xxsip_300522.bin
....................
Save new record? [s]ave, [c]hange or [q]uit: s
New record saved.
View the upgrade status on an ONU:
zSH> onu image 6/1/2 show
Version:
isCommitted:
isActive:
isValid:
Partition 0
------------------------SOFTWAREIMAGE0
False
False
False
Download status:
Onu model id:
Upgrade start time:
Will be activated:
Will be committed:
Upgrade type:
Partition 1
------------------------S2.5.117
True
True
True
Downloading 43% complete
2426
SEP 03 13:15:23 2013
True
True
Auto
CPE Manager
The CPE Manager provides a means for managing customer premises equipment (CPE)
devices without requiring extra routable IP addresses to reach these CPE end-points.
Add a public address for the CPE manager.
zSH> cpe-mgr add public 10.201.123.22
CPE Manager using 10.201.123.22 for public interface.
Where IP 10.201.123.22 is the MXK management IP address
Add a GPON Traffic Profile
new gpon-traffic-profile dba-enabled = true dba-fixed-us-ubr-bw = 128 dba-max-us-bw = 1024000
dba-extra-us-bw-type = besteffort 128
Add the local device to the CPE manager.
zSH> cpe-mgr add local 1-6-1-501/gponport gtp 128
GEM Port 1-6-1-501/gponport has been created on ONU 1-6-1-1/gpononu.
Created CPE Management interface: 1-6-1-501-gponport-7/ip
zSH> cpe-mgr add local 1-6-1-502/gponport gtp 128
GEM Port 1-6-1-502/gponport has been created on ONU 1-6-1-2/gpononu.
Created CPE Management interface: 1-6-1-502-gponport-7/ip
View the CPE Manager ports
zSH> cpe-mgr show
CPE Manager public side interface:
IP:
10.201.123.22
CPE Manager local management network:
IP:
1.0.0.1/8 (default) (active)
VlanID: 7 (default)
Managed CPE Interface Configuration:
Interface
Local IP
ECHO FTP SSH Telnt HTTP SNMP HTTPS
-----------------------------------------------------------------------------------1-6-1-501/gponport[UP] 1.6.31.81
51921
51922 51923 51923
1-6-1-502/gponport[UP] 1.6.31.97
51924
51925 51926 51926
-
PPPoE Configuration for ONT 6-1-2
Create a bridge connection with VLAN translation in the MXK and the ONT Ethernet ports
1 and 2 and Wireless using the command “bridge add”.
zSH> bridge add 1-6-1-2/gpononu gem 302 gtp 128 downlink vlan 35 tagged g-vlan 654 eth [1-2] rgbpppoe
zSH> bridge add 1-6-1-2/gpononu gem 302 gtp 128 downlink vlan 35 tagged g-vlan 654 wlan 1 rgbpppoe
Specifying a PPPoE username and password
zSH> cpe rg wan modify 6/1/2 vlan 35 pppoe-usr-id centrle@extreme pppoe-password 777200
Service has been modified
Activatation of ONT Ethernet ports
zSH> cpe eth add 6/1/2/1 admin-state up
Service has been created
zSH> cpe eth add 6/1/2/2 admin-state up
Service has been created
WLAN Configuration for PPPoE Service
Seen the WLAN default profiles
zSH> cpe wlan com-adv show 1
Profile
Channel
Auto Channel Timer (min)
802.11n Mode
802.11n Rate
802.11n Protection
802.11n Client Only
54g Rate
Multicast Rate
Basic Rate
Fragmentation Threshold
RTS Threshold
DTIM Interval
Beacon Interval
Global Max Clients
XPress Technology
Transmit Power
WMM (WiFi Multimedia)
WMM No Ack
WMM APSD
Access Point Mode
Bridge Restriction
WPS
WPS Add client Method
WPS Access Point Mode
1 entries found.
zSH> cpe wlan common show
Profile
Network Authentication
Hide Access Point
Isolate Clients
WMM Advertise
Multicast Forward
Max Clients
WPA Group Rekey Interval
WPA Encryption
WEP Encryption
WEP Strength
Radius Server IP
Radius Port
WPA2 Preauthentication
Network Reauthen Interval
1 entries found.
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
index(1) Default_Cpe_WlanAdv
auto
15
auto
auto
auto
disabled
auto
auto
default
2346
2347
1
100
16
disabled
100
enabled
disabled
enabled
accesspoint
disabled
disabled
push-button
configured
Default_Cpe_Wlan
: index(1) Default_Cpe_Wlan
: open
: disabled
: disabled
: disabled
: disabled
: 16
: 0
: aes
: disabled
: 128bits
: 0.0.0.0
: 1812
: disabled
: 36000
Modify common profile to use WPA-PSK.
zSH> cpe wlan common modify 1 net-authen wpa2-psk
Profile has been modified.
Add WLAN service to control it from the MXK. Otherwise, the end user can control it
from the ONT).
zSH> cpe wlan add 6/1/2/1 admin-state up ssid ONT2-Zhone encrypt-key zhoneont2telbo
Service has been created
Video Configuration
Vudeo services uses bridge configurations on both the MXK and the ONT. The STB will
get the IP address from the service provider network.
Gpon traffic profile for video service
zSH> new gpon-traffic-profile dba-enabled = true dba-fixed-us-ubr-bw = 512 dba-max-us-bw = 1024
dba-extra-us-bw-type = nonassured 1024
gpon-traffic-profile
New record saved.
1024
Add bridge video for ONT 6-1-2
The video option in the bridge add command enables IGMP snooping in both the MXK and
ONT.
zSH> bridge add 1-6-1-2/gpononu gem 902 gtp 1024 downlink vlan 41 tagged video 0/10 eth [3,4]
rg-bridged
Adding bridge on 1-6-1-2/gpononu
Created bridge-interface-record 1-6-1-902-gponport-969/bridge
CPE Connection 1-6-1-902/gponport/12/1/0/0 has been created
Activatation of ONT Ethernet ports
zSH> cpe eth add 6/1/2/3 admin-state up
Service has been created
zSH> cpe eth add 6/1/2/4 admin-state up
Rate Limiting
Create a rule to limit rate service
zSH> rule add ratelimitdiscard 2/1 rate 110000
Created packet-rule-record 1/1 (ratelimitdiscard)
Apply rule to a bridge interface record to limit Downstream rate
zSH> update bridge-interface-record bridgeIfEgressPacketRuleGroupIndex = 2 1-6-1-301-gponport520/bridge
bridge-interface-record 1-6-1-302-gponport-520/bridge
Record updated.
Upstream rate limit is controlled with the T-CONT by creating a gpon-traffic-profile
zSH> new gpon-traffic-profile dba-enabled = true dba-fixed-us-ubr-bw = 100352 dba-max-us-bw =
100352 100
gpon-traffic-profile
New record saved.
100
GPON traffic profile is applied to the connection that requires the rate to be limited
zSH> update gpon-port-config traffic-profile = 100 1-6-1-302/gponport
gpon-port-config 1-6-1-302/gponport
Record updated.
Activate ONU
To display the ONTs currently on the OLT, and discover the available serial numbers:
gpononu show 6/1
zSH> onu show 6/1
Run the gpononu set command to associate a ONU port ID to a discovered ONT’s
serial number:
zSH> onu set 6/1/2 vendorid ZNTS serno fsan 032E1F89
Onu 1 successfully enabled with serial number ZNTS 032E1F89
or
zSH> onu set 6/1/2 1
Where 6/1/2 X is: slot(1-18)/OLT(1-8)/ONT (1-64) and X is the ID of the serial
number of the ONT found with the command gpononu show 6/1