CAVCO SALES
Office: 620-767-7273
Mobile: 785-466-0189
Fax: 620-767-5303
Visit our Website & View All Our Machine Pictures: www.cavcosales.com
E-Mail Us: [email protected]
Visit Our E-Bay Store At: http://stores.ebay.com/e-cavco
June 1, 2017
Pictures Are Available On-Line
We Are Distributors For The Following Manufactures
Axe Equipment - Goodson Products - Regis Manufacturing - Peterson Machine Tool Parts –
Kansas Instruments Parts - Kwik Way Boring Bar Repair Parts & Supplies – Peterson & Van Norman Boring
Bar Repair Parts - BHJ High Performance Fixtures & Tooling
Used Equipment List
Crankshaft Equipment
CA1701
Camshaft Checking
Station
This Is A Piece Made For Checking Bend and Lobe Lift On Camshafts.
Comes With: 1” Travel Dial Indicator, 2-Sets Centers, Quick Lock/Set-Up Tailstock,
34” Length Capacity
475.00
CA1871
Wheel Balancing
Stand
Stuhr, 36” Capacity, Excellent Condition.
565.00
Connecting Rod Equipment & Tooling
CA1910
Rod Boring Machine
Van Norman Model 232 Pin Shop.
CA1731
Mandrel Storage
Cabinet
Sunnen Model CRG-600, Fair Condition, Cleaned & Ready.
365.00
CM6002
Mandrel Storage
Cabinet
Sunnen Model CRG-600, Good Condition, Cleaned & Ready.
425.00
CA1833
Connecting Rod Heater Sunnen Model CRH-50, 115v. Good Unit & All Functions Work.
Comes With: Wrist Pin Pushing Tool. Red Unit.
945.00
CA1849
Connecting Rod Heater Sunnen Model CRH-50, 115v. Good Unit & All Functions Work.
Comes With: Wrist Pin Pushing Tool. Vista Green Unit.
1,075.00
CA1717
Rod Checking Fixture
Sunnen Model TN-111. Red Unit, Good Condition.
Comes With: TN-46A For Pistons, TN-50A For Rods With Pins Only.
415.00
CA1773
Rod Checking Fixture
Sunnen Model TN-111. Red Unit, Good Condition.
Comes With: TN-46A For Pistons, TN-50A For Rods With Pins Only.
415.00
CS1016
Rod Checking Fixture
Sunnen Model TN-111. Red Unit, Good Condition.
Comes With: TN-46A For Pistons, TN-50A For Rods With Pins Only.
415.00
1
New Arrival
CA1881
Rod Checking Fixture
Sunnen Model TN-111. Red Unit, Good Condition.
Comes With: TN-46A For Pistons, TN-50A For Rods With Pins Only & Small Engine
Connecting Rod Adaptors .
445.00
CA1742
Precision Rod Sizing
Gauge
Sunnen Model AG-300, Gauge Only No Tooling.
745.00
CA1830
Precision Rod Sizing
Gauge
Sunnen Model AG-300 precision Sizing Gauge.
Comes With: 2-Calibration Rings, Adjusting Wrench, Medium & Large Points &
Wrist Pin Comparing Fixture. Serial # 12256
1,095.00
CA1925
Precision Rod Sizing
Gauge
Sunnen Model AG-300 precision Sizing Gauge.
Comes With: 2-Calibration Rings, Adjusting Wrench, Medium & Large Points &
Wrist Pin Comparing Fixture.
1,095.00
CM1003
Rod & Pin Hone W/
AG-300 Gauge &
Mandrels
Sunnen, Model LBB-1699, 115v, Nice & Clean Machine.
Comes With: Twin Rod Torque Bar, Gauge Mounting Bracket, Multiple Adjustable
Coolant Hoses & Spindle Feed Travel Indicator, The AG-300 Precision Sizing Gauge W/
2-Point Sets & Centralizer Rings, CR-1900, 2100, 2300, 2500, 2700 Mandrels & Several
KL Mandrels.
4,450.00
CA1769
Rod & Pin Hone
Sunnen, Model LBB-1499, 6-Speed, 115v, Good Clean Machine.
Comes With: Twin Rod Torque Bar, Gauge Mounting Bracket, Adjustable Coolant
Hose And Spindle Feed Travel Indicator.
2,190.00
CS1031
Rod & Pin Hone W/
AG-300 Gauge &
Mandrels
Sunnen, Model LBB-1499, 6-Speed, 115v, Good Clean Machine.
Comes With: Twin Rod Torque Bar, Gauge Mounting Bracket, Adjustable Coolant
Hose, Spindle Feed Travel Indicator, AG-300 Gauge W/ Two Point Sets,
CR-2300, CR-2500, KL-900, KL-931, KL-962 Mandrels.
4,390.00
CA1827
2-Speed Rod Pin Hone
Sunnen Bench Top 2-Speed Unit Mounted On A Bench, 115v.
Comes With: Coolant Pump.
1,150.00
CA1840
Rod & Pin Hone W/
AG-300 Gauge &
Mandrels
Sunnen, Model LBB-1699, 115v, Nice & Clean Machine.
5,450.00
Comes With: Twin Rod Torque Bar, Gauge Mounting Bracket, Multiple Adjustable
Coolant Hoses & Spindle Feed Travel Indicator, The AG-300 Precision Sizing Gauge W/
2-Point Sets & Centralizer Rings, CR-2100, 2300, 2500 Mandrels & KL-931, 962, 994 Pin
Mandrels W/ Truing Sleeves.
CA1894
Bench Top Rod Hone
Sunnen Model LBA-650, 115v.
Comes With: Coolant Pump, Spindle Feed Rod Indicator, Twin Torque Bar & 2-Speeds
1,075.00
CA1926
Bench Top Rod Hone
Sunnen Model LBA-650, 115v.
Comes With: Coolant Pump, Spindle Feed Rod Indicator, Twin Torque Bar & 2-Speeds
1,075.00
CM2001
Rod & Cap Grinder
Sunnen Model CRG-750, 115v.
Comes With: Dust Tray & Dressing Diamond, Good Running Condition.
SOLD
CM4004
Rod & Cap Grinder
Sunnen Model CRG-770, 115v. With Main Cap Attachment.
Comes With: Diamond Dresser & Dust Tray. Good Condition, Green Unit.
1,595.00
CA1492
Rod & Cap Grinder
Sunnen Model CRG-750, 115v.
Comes With: Diamond Dresser & Dust Tray.
1,375.00
CA1768
Rod & Cap Grinder
Sunnen Model CRG-500, 115v.
CA1834
Rod & Cap Grinder
Sunnen Model CRG-770, 115v. With Main Cap Attachment.
Comes With: Diamond Dresser & Dust Tray. Nice Condition, Green Unit.
2
545.00
1,695.00
CA1893
Rod & Cap Grinder
Sunnen Model CRG-750, 115v. With Late Model Style Main Cap Grinding Attachment. 1,525.00
Comes With: Diamond Dresser, Dust Tray & Upgraded Main Cap Grinding Attachment..
CS1025
Rod & Cap Grinder
Sunnen Model CRG-500, 115v.
CA1875
Large Rod & Cap
Grinder
Peterson/KI Model CG-87.
Mandrels
FAMA/Peterson/KI
Honing Mandrels
We Have Acquired A Large Selection Of Diamond Honing Mandrels Used On Peterson, CALL
Kansas Instruments/Peterson & FAMA Model “RHM” Connecting Rod Honing Machines.
Diamonds
FAMA/Peterson/KI
Call For Availability & Prices. We Also Have Many Blank Holders For Remounting.
Diamond Rod Honing Stones
Rod Honing Mandrels
625.00
1,575.00
CALL
We Stock A Large Supply Of Connecting Rod & Industrial Honing Mandrels!
Cylinder Head Equipment & Tooling
CA1927
Valve Guide & Seat
Machine
Peterson Model TCM-25, 230v, 3ph.
Comes With: Drill Chuck, Seat Cutter Driver & Selection Of Seat Pocket Cutters,
Pilot Level, Spot Facer & Pilots, Leveling Pilots, Valve Guide Drivers & Core Drill/
Reamer Set.
6,250.00
CA1928`
Valve Guide & Seat
Machine
Kwik Way Model 041, 230v, 3ph.
Comes With: Seat Pocket Cutter Kit, Several Pilots, Pilot Level, Spot Facer & Pilots,
Drill Chuck, Valve Guide Driver Set, Valve Seat Driver Set & Core Drills/Reamers.
7,350.00
CA1864
Cylinder Head Pressure CCP Model 50RL. 50” Head Capacity. Very Nice And Complete Unit.
4,850.00
Tester
Comes With: Complete Set Of Lexan Testing Plates, 2-Diesel Testing Plates And Testing
Plugs, Several Sets Angle Adaptor Stands, All Standard Sealing Adaptors & Block Testing
Devices.
CA1868
Sunnen Valve Face
Concentricity Checker
Sunnen Model VRC-500.
Comes With: Adjustable Stop & .0001” Dial Indicator.
CA1904
Diamond Valve Guide
Honing Station
Sunnen Model HS-60. 115v.
Comes With: Flow Over Coolant System, Mandrel Setting Fixture & 2-Mandrels
W/ Diamond Sleeves, 11/32” & 3/8” & 5/16 Mandrel Only.
1,875.00
CO1747
Valve Refacer
Kwik Way Model VL, 230v, 1ph.
Comes With: A Good Selection Of Spare Grinding Wheels & A Spare Chuck
3,250.00
CO1785
Valve Refacer
Kwik Way Model VS, 115v. Good Grinding Machine.
1,500.00
CA1804
Valve Refacer
KO Lee Model K500HM-Air, 115v
Comes With: Air Chuck, Standard Collet, Grinding Oil & Diamond Dresser
1,850.00
CS1008
Large Valve Refacer
Sioux Model 682, 115v.
Comes With: Standard Valve Chuck & Large Diameter Chuck, Grinding Range
(.230” – 11/16” & 9/16” – 1.250”). The Large Chuck Has Not Been Put Into Service.
3,875.00
CA1732
Valve Refacer Cabinet
Sioux Model 644. Very Well Made & Sturdy
245.00
CA1788
Valve Seat Grinding
Set
KO Lee Model P302BB, 115v.
Comes With: 1-Stone Holders, Electric Driver, Stone Dresser, 8-Collapsing Pilots,
Pilot Installer/Removal Tool, Metal Storage Box And 25 Various Grinding Stones.
745.00
3
745.00
CA1789
Valve Seat Grinding
Set
Black & Decker, 115v.
Comes With: 2-Stone Holders, Electric Driver, Stone Dresser, 4-Groove Top Pilots,
Pilot Installer/Removal Tool, Metal Storage Box And 25 Various Grinding Stones.
695.00
CA1792
Valve Seat Grinding
Set
Sioux Model 1725E. Hex Drive Style Holders.
Comes With: 2-Stone Holders, Angled Electric Driver, Stone Dresser, 8-Pilots,
Metal Storage Box, 2-Vlave Guide Cleaning Brushes And Various Grinding Wheels..
695.00
CA1855
Valve Seat Grinding
Set
Sioux Model 1725A, 115v.
Comes With: 2-Stone Holders, Angled Air Driver, Stone Dresser, 25-Pilots, Metal
Storage Box And A Selection Of Grinding Stones.
925.00
CA1924
Valve Seat Grinding
Set
Black & Decker, 115v.
Comes With: 2-Stone Holders, Electric Driver, Stone Dresser, 4-Groove Top Pilots,
Pilot Installer/Removal Tool, Metal Storage Box And 25 Various Grinding Stones.
450.00
CA1934
Air Float Cylinder
Head Cradle
Peterson Air Float Cradle, 180 Degree Cradle Used To Hold And Adjust Level Of
Cylinder Heads When Doing Valve Guide And Seat Work, 41” Capacity.
1,095.00
CA1935
Air Float Cylinder
Head Cradle
Peterson Air Float Cradle, 180 Degree Cradle Used To Hold And Adjust Level Of
Cylinder Heads When Doing Valve Guide And Seat Work, 48” Capacity.
1,295.00
CO1913
Air Float Cylinder
Head Cradle
Large Kwik Way Air Float Cradle, 360 Rollover Capacity, 43” Rollover Capacity,
New Air Fittings & Foot Pedal. Excellent Unit For Those Large Heads.
1,795.00
Surfacing Equipment
CA1828
Head & Manifold Dry
Grinder
Peterson Model 50E, 230v, 3ph
Comes With: Stone Dresser, No Stone, New Mounting Bolts.
CA1889
Large Head & Manifold Peterson Model 72DE, 230v, 3ph
Dry Grinder
Comes With: Stone Dresser & Good Stone.
2,675.00
CA1910
Head & Block Mill
6,350.00
Storm Vulcan, Model 85B, 230v, 3ph.
Comes With: A Large Assortment Of Head & Block Tooling.
1,675.00
Block Boring & Honing Equipment
-- TORQUE PLATES IN STOCK -Aluminum W/ Hardened Inserts 4.380” Bore
Aluminum W/ Hardened Inserts
BHJ
BHJ
CH-2-R-AL-T
NIS-VG30-R-AL-T
Chevy 400
Nissan DOHC V-6
CA1929
Sunnen Bore Gauge
Setting Fixture
Sunnen Model CF-1126.
Comes With: 2”, 4” & 5” Standards & protective Case.
1,125.00
CA1930
Sunnen Bore Gauge
Setting Fixture
Sunnen Model CF-1126.
Comes With: 2”, 3”, 4” & 5” Standards & protective Case.
1,175.00
CA1931
Sunnen 12” Dial Bore
Gauge
Sunnen Model GA2121, .0001” Dial.
Comes With: Storage Box. Dial does have a crack in the face.
4
398.00
368.00
650.00
CA1933
Power Stroke Cylinder Sunnen Model CV-616, 230v, 3ph.
Hone
Comes With: Standard Engine Block Cradle, DH-93 Diamond Honing Head,
Three Sets Diamond Honing Stones & 3 Sets Plateau Honing Brushes.
19,800.00
CA1919
Midget Portable
Cylinder Hone
Sunnen Model SN-75. 1.75” – 2.00” Capacity
Comes With: 12” Extension & Metal Storage Box.
SOLD
CA1920
Junior Portable
Cylinder Hone
Sunnen Model JN-95. 2.00” – 2.6” Capacity.
Comes With: 12” Extension & Metal Storage Box.
SOLD
CA1921
Portable Cylinder
Hone
Sunnen Model AN-112.
Comes With: 12” Extension & Metal Storage Box.
385.00
CA1922
Heavy Duty Portable
Cylinder Hone
Sunnen AN-815.
Comes With: 12” Extension & Metal Storage Box.
465.00
CA1923
Line Hone Mandrel
Driver
Sunnen Model GGN-150. Will Drive Any Sunnen Mandrels, Light To Medium Duty.
This One IS New In A Box.
650.00
CM6001
Line Hone Mandrel
Rack
Sunnen Model CH-36 Vertical Mandrel Rack For Up To Five Line Honing Mandrels.
Comes With: New Paint.
495.00
CA1907
Air Assisted Cylinder
Honing Cabinet
Peterson/KI Model HC1D, 115v.
Comes With: Delapena Friction Feed/Retract Honing Head (2.5” – 5.5”), In-Line &
V-Block Clamping Fixture, Load Meter, Adjustable Air Assisted Stroking CounterBalance, Stone Storage Tray & Oil Filter.
NEW
Cylinder Bore Gage
New Dial Bore Gauges, 2” – 6”, Your Choice Of - .0005”/.001” Dial Indicators.
CA1890
Portable Boring Bar
Kwik Way Model FN, 115v.
Comes With: 2.6” To 5.4”All standard Boring Tooling and Universal Tie-Down Clamp.
4,650.00
CA1891
Portable Boring Bar
Rottler Model DA-OB, 115v. Boring Range 2.7” 5.5”.
Comes With: Standard Boring Tools.
4,350.00
CA1752
Low Profile Boring
Stand
Peterson Model BF-88. Designed To Hold Straight & V-8 Block At A Perfect Height
While Boring Cylinders.
275.00
CA1898
Low Profile Boring
Stand
Storm Vulcan. Designed To Hold Straight & V-8 Block At A Perfect Height
While Boring Cylinders. Easily And Quickly Roll Stand to Accommodate 45 Degree
V-Block Decks.
285.00
SOLD
145.00
Cleaning Equipment
CA1628
Glass Bead Cabinet
Royal, Model S-36-I, 115v.
Comes With: Trigger Style Bead Gun & Cabinet Lighting.
CA1756
Glass Bead Cabinet
Peterson Model GB2032, 115v.
Comes With: 25cfm Foot Pedal Operated Bead Gun, Cabinet Lighting, Vacuum Dust
Collector & Glass Beads.
1,450.00
CO1777
Glass Bead Cabinet
Zero Model 55-6 300R/DF, 24” x 42” Capacity.
Comes With: 25CFM Gun, Fluorescent Lighting, Media Re-Claimer, Foot Pedal
Operation & Two Full Size Side Door Entries.
2,395.00
5
745.00
CA1759
Spray Washer
Better Engineering, Wash Capacity 26” Diameter By 36” Height, 230v, 3ph,
Comes With: Parts Basket and Rolling Castors.
2,850.00
CA1812
Spray Washer
Hot Tank Combo
Axe Spray Washer Hot Tank Combination Cabinet, 230v, 3ph. Electric Heat.
Comes With: 10 HP Pump, Dual 20” Turntables, Parts Basket. Large Hot Tank/Soak
Compartment With Basket & Lift Bar, Oil Skimmer, Dual 7-Day Timer & Electronic
Thermostat. 32” Height Capacity x 2-20” Diameter Turntables.
6,400.00
CA1853
Spray Washer
Kwik Way/PMW Model 412, Electric Heat, 230v, 3ph. 26” x 40” Capacity
Comes With: 5HP Pump, Head Rack & Parts Basket, Full Cabinet Insulation. The Rinse
Cycle Is Not Functional. With New heating Element
3,850.00
CA1884
Spray Washer/
Hot Tank Combo
Axe Model SW20EHT, 20” Diameter x 32” H, 230v, 1ph.
Comes With: 5HP Pump, 20” Diameter Turntable, Block Capable Soak Tank W/Soak
Basket & Lift Bar, 30 Minute Cycle Timer, Air Induced Steam Vent, Electronic
Thermostat & Low Fluid Level Limit Switch.
7,200.00
CO1782
Small Parts Tumbler
Peterson/Kansas Instruments Small Parts Tumbler Model GPC-30, 115v
This Machine Comes With A Like New Basket & A Full Charge Of Media.
945.00
CS1026
Solvent Tank
Cleanmaster Large Solvent Tank Model 90, 45 Gallon Capacity, 115v.
Comes With: Parts Cleaning Shelf and Castors For easy Positioning.
625.00
CO1774
Bayco Thermal
Cleaning Oven
Bayco Model BB-26. 115v. Great Condition!
Comes With: 2-Sections Stacking.
4,650.00
CA1793
Peterson Thermal
Cleaning Over
Peterson/Kansas Instruments Model BK-17, 115v.
Comes With: : Main Burner & After Burner For Smoke Reduction, Loading Cart With
Attached Loading Platform
3,950.00
CA1553
Basket Washer
Intercont Basket Washer, 115v. Cleans With A Gentle Rocking Motion.
CO1663
Shot Tumbler
Geoff Belt Type, 230v, 3ph.
675.00
1,390.00
Miscellaneous
CA1936
3HP Rotary Phase
Converter
Roto Pulse, 220v, 1ph. Capacitor Start & Run.
575.00
CA1937
3HP Rotary Phase
Converter
Arco Electric, 220v, 1ph. Capacitor Start.
450.00
CA1627
1000# Electric Hoist
Budget Model 325919-10A, 115v.
595.00
CO1775
40 Ton H-Frame
Hydraulic Press
Nugier Model H40-14APBD.
Comes With: Air Over Hydraulic Pump, Rapid Down-Feed, Foot Pedal
Operation, Traveling Head, Winch Style Base Plate and 14” Stroke.
CS1012
40 Ton Hydraulic Press Nugier Model H40-14. Air Over Hydraulic Pump, Rapid Down-Feed, Foot Pedal
W/ Press Plate Set
Operation, Traveling Head, Winch Style Base Plate and 14” Stroke.
Comes With: Set Press Plates & Complete Set Of Nugier Bearing Press Plates.
CA1540
Brake Rotor Grinder
Polisher
Ammco Model 4650, 115v.
185.00
CA1543
On-The-Car Brake
Rotor Lathe
Kwik Way Model “KWIKLATHE”, 115v.
595.00
6
2,550.00
2,695.00
CA1733
Brake Rotor Lathe
Van Norman Model 415, 115v.
Comes With: A Good Selection Of Tooling & Mounted On Work Cabinet.
525.00
CS1009
Large Drum Lathe
Van Norman Model 303 Senior, 115v.
Comes With: 2”, 1” & Small Arbor, Large Selection Of Tooling, Drum Grinding
Attachment, Variable Feed Rate, Work Light & Silencer Bands.
1,875.00
CS1013
Combination Brake
Drum & Rotor Lathe
Ammco Model 4000, 115v
Comes With: Standard 1” Brake Tooling Package, Spare Rotor Inserts, Work Bench
& Hubless Rotor Adaptor.
2,450.00
CA1896
Combination Brake
Drum & Rotor Lathe
Van Norman Model 204C, 115v.
Comes With: Good Selection Of Cones & Adaptors, Variable Speed Feed System,
Mounted On Heavy Duty Work Platform & Standard Tooling.
2,650.00
CA1932
Combination Brake
Drum & Rotor Lathe
Ammco Model 4000, 115v
Comes With: Standard 1” Brake Tooling Package, Spare Rotor Inserts, Work Bench,
Hubless Rotor Adaptor & 9/16 Mandrel For Ultra Small Parts.
1,895.00
CM5001
7.5HP Air Compressor Napa Brand, 7.5HP, 80 Gallon Tank, 230v, 3ph.
Comes With: Tested And Ready To Work. Very Strong 2-Cylinder Compressor.
1,185.00
We Have A Large Stock Of Sunnen Mandrels! Call For Pricing And Availability.
We Also Stock A Wide Variety Of Used & New Machine Parts & Tooling.
We Have A Large Selection Of New & Used Van Norman Boring Bar Parts.
Need A Sunnen Mandrel Give Us A Call.
7
We Have A Large Inventory Of Used Tooling & Hard To Find Parts
Give Us A Call For Your Parts & Supply Needs!
Thank You For Your Business From The
Cavco Team:
Dan, Cindy, Cameron, Caleb & Jeff
8