Unit 4 Section 3
Apply procedures for manipulating objects (Section 4
layers), (Section 5 modifying),
(Section 6 templates, viewports).
1.
The following are
properties of an
object:_______________
 Layer
 Color
 Linetype
 2. If
you draw a rectangle a
width of 5" and a height of
10", what would the area
be?_____________________
 50
sq. inches
 3. In
a Template file, the user
can select ______________ as
the units.
 Architectural
 Engineering
 Decimal
 4. When
you __________ a
layer, you can avoid
changing entities on that
LAYER, while still being
able to see the layer.
◦Lock
5. To
avoid having others
change entities on a specific
LAYER:_______________
 Lock
the layer.
 6. The
_____________
command provides the
length of an object but does
not place a dimension line
on the drawing.
 Distance
 7. Layers
control__________________
of objects in the drawing.
 Linetype
 Color
 Visibility
of objects
8.The
bigger the linetype
scale, ______
 The
less repetitions appear
on a hidden line
 9. To
EXTRUDE a
profile:_________________
 Take
a 2D shape and give it
thickness.
 10.
Which CAD command
enlarges or reduces selected
objects proportionally in the
X, Y, and Z directions from a
base point? _______________?
 Scale
 11.
To create a duplicate,
opposite shape, use the
_____________ command.
 Mirror
 12.The_______command
needs a boundary line, arc,
or circle to connect to.
 Extend
 13.
The best way to create
a parallel copy of geometry
in your drawing would be
using the _____________
command?
 Offset
 14.
Which CAD command
creates multiple copies of
objects in a circular or
rectangular pattern?
 Array
 15.
Moving an object "0,
0, -4" would move it four
units in which
direction?_______________
 Negative
z
16.
The ___________
command is used to
round off corners.
 Fillet
 17.
The command that
allows lines to be lengthened
to a specified line or object on
a CAD drawing
is:_______________
 Extend.
 18.
The
__________________command
allows you to alter the shape of
an object, by making it wider or
shorter proportionally.
 Stretch
 19.The________________co
mmand applies an angled
corner to two intersecting
lines.
 Chamfer
 20.You
would use the
_____________command to
combine multiple objects,
like lines/arcs into one.
 Join
 21.
Which command
breaks a line into two or
more independent lines?
_____________________
 Break
 22.
The command that
allows lines to be
lengthened to a specified
line or object is the
___________ command.
 Extend.
 23.In
CAD, a ____________ file
includes specific units and
settings to use to start new
drawings by saving the file with a
_____________ extension.
 Template/
.dwt