Technical Data
Facilities Requirements
Typical Installation Dimensions
Adapted to end user requirements
Length
1037mm
Height
600mm
Width
440mm
Power Requirements
Hopper Volume
Range
25ltrs to 80ltrs
Phases
Single Phase
Frequency
50 Hz
Voltage
220 - 240 Vac
Length 1037mm
0.5 Amp
Pneumatic Requirements
Operation Control
Product Flow Control
S7 Siemens PLC
Vibration Amplitude
Control
REOVIB MFS 268
elim Operation
Pressure Minimum
4 Bar - 0.4MPa - 51psi
Grade - Minimum
ISO 8573.1 Grade 1.2.2
Tubing Size (OD)
4 up to 8mm
House Extraction
Feeder bowl signal controls
elim to switch ON & OFF
simultaneously with feeder bowl
Venturi Pressure
Varies on site - Pa - Pa
elim Pip OD
OD (Standard) 40mm
Documentation
User Manual
A4 bound hardcopy + CD ROM
Product Contact Change Parts
Documentation Supplied
Product Dedicated FAT Test Sheets
Supplied with setup parameters
Prodieco
Unit 4 Ext. 2nd Avenue
Cookstown Industrial Est.
Tallaght, Dublin 24
Ireland
t: +353 (0) 1 451 3411
e:[email protected]
w:www.prodieco.com
Unique sorting solution
eliminates defective product.
Increases OEE and production.
Next generation elim,
removes broken product
before entering the
feeding system
Prodieco developed the elim | Tablet Sorting System in
response to difficulties pharmaceutical companies experienced
with broken tablets entering the feeding system, causing micro
stoppages and downtime.
How does elim work?
SIEVE 1 - removes
small clumps of
tablets or twins.
The elim is a mechanical vibratory system that sorts broken product before it enters the tablet
feeding system. elim is versatile - operating in multiple sites on multiple machine types. It
is proven to increase OEE on blister packaging lines. As elim is inline, it reduces set up time
from other more labour intensive offline sorting systems. Installing an elim system will lead to
significant cost savings in your operation, reducing waste and increasing operator morale.
SIEVE 2 - removes
capped and broken
tablets, sieve is
designed to the
product shape.
System applications, inline & offline sorting systems
PLC Controlled Gate mechanism
to control tablet flow. elim product
channel width can be 300mm
or 400mm wide – throughput
dependant on blister machine and
tablet geometry specifications.
elim on the blister line, most
efficient and popular.
elim offline – mobile, transfer
between packaging and
tableting suites
Proven results with elim
Customer used elim to sort batch of 1.3 million
tablets. 1.5kg of defective product was isolated
finding 6,500 broken tablets & particles. The
experience from the customer side was that it
takes 1-2 minutes to clear each blockage. 6,500
minutes saved with elim, saving 108 hours over
5 days, 3 working shifts. Increases production
performance and saves money.
Addition of automatic weighing
scales – programme exact weight
to be sorted with automatic shut
off to switch between containers
Rejection Capability
Broken, Clump & capped tablets
can be rejected. All tablet particles
smaller than 75% length of the
tablet are rejected 100% of the
time. Based on product testing
rejection rates can be confirmed.
elim removes capped tablets,
broken particles and eliminates
micro stoppages.
• Results can be up to 4-5kg/min
throughput.
• Vibratory drive unit ensures all
tablets lie on flat side and single
layer sieving.
•Dedicated product specific sieve
plates that are designed for quick
and easy change over.