OSA8R
8” ROUND ALUMINUM BOLLARD
CATALOG #:
TYPE:
PROJECT:
LED
NOTES:
EXAMPLE
OSA8R
t
- L20/840 - AC - FT - DBR - AB - OPTIONS - DIM - UNV
t
SERIES
t
t
t
LUMEN CRI &
SHIELDING HOUSING
PACKAGECCT
TOP
t
t
t
FINISH
ANCHOR OPTIONS
OPTIONS BOLTS
t
DRIVER
t
VOLTAGE
CROSS SECTIONS
FEATURES
LEDs provide high-efficacy, good color
rendering, a variety of color options, and
50,000 hours rated life (L70).
XX
Round aluminum bollard features a highly
reflective bowl reflector with colormatched trim for effective light distribution
and pleasing appearance day or night.
XX
Available with flat or dome top.
XX
Up to 2000-lumen module.
XX
80 CRI minimum.
XX
2700K, 3000K, 3500K, or 4000K.
XX
Finned, extruded aluminum heat sink for
maximum heat dissipation.
XX
This fixture is proudly made in the USA.
XX
37-5/8”
40”
37-5/8”
43-1/2”
LIGHT
CENTER
HEIGHT
LIGHT
CENTER
HEIGHT
ø8”
ø8”
Flat Top (FT)
Weight: 29 Lbs.
Dome Top (DT)
Weight: 29 Lbs.
ORDERING INFORMATION
SERIES
OSA8R
ANCHOR BOLTS
8” Round Aluminum Bollard
AB
Example: L20/840
LAB
PAB
LED PACKAGE
LUMEN
PACKAGE
NOMINAL
LUMENS
MINIMUM
CRI & CCT
AVERAGE
SYSTEM
WATTAGE
L11
1100
17
L20
2000
827 = 80CRI, 2700K
830 = 80CRI, 3000K
835 = 80CRI, 3500K
840 = 80CRI, 4000K
28
Anchor bolts (Three 3/8” x 12” cast-in galvanized
steel anchor J-bolts, shipped with fixture.
Mounting template included.)
Less anchor bolts
P re-shipped anchor bolts (Three 3/8” x 12”
cast-in galvanized steel anchor J-bolts. Mounting
template included.)
OPTIONS
SF
DF
S ingle fuse (120V, 277V, or 347V only; must
specify voltage)
D ouble fuse (208V, 240V, or 480V only; must
specify voltage)
Nominal lumens based on 3500K CCT, actual lumens may vary.
DRIVER
SHIELD/REFLECTOR
See back for shielding details.
AC
A crylic lens with bowl reflector
Dome top
Flat top
FINISH OPTIONS
BLK
DBZ
DBR
GRAY
GRN
SLV
WHT
RAL#____
Driver prewired for non-dimming applications
10% dimming driver prewired for 0-10V low
voltage applications
VOLTAGE
HOUSING TOP
DT
FT
DRV
DIM
Black (RAL #9004)
Dark bronze
Medium bronze
Standard gray
Green (RAL #6005)
Satin aluminum (RAL #9006)
White (RAL #9003)
Specify custom color
H.E. Williams, Inc.
Carthage, Missouri
120
208
240
277
UNV
347
480
w w w.hew.com
120V
208V
240V
277V
120-277V
347V
480V
417-358-4065
Bollards
Page 1 of 2
OSA8R
LED
SPECIFICATIONS
Housing – Fabricated aluminum, minimum
.125” thick.
Housing Top – Spun aluminum, minimum
.125” thick.
Reflector – Spun aluminum upper and lower
reflectors with clear specular finish.
Shield – UV stabilized clear acrylic cylinder
sealed with silicone. Type V distribution.
Electrical – High quality mid-power LED
board. L70 at 50,000 hours. Prewired at
factory for easy field installation. Rated -40ºF
minimum starting temperature.
Finish – Super durable polyester powder
coat bonded to phosphate-free, multi-stage
pretreated metal, meets and exceeds AAMA
2604 specifications for outdoor durability.
Mounting – Minimum 2” recessed in ground
with four-point hot dip galvanized 1/4” A36
steel baseplate. For accurate installation a
fullscale mounting template is provided with
each bollard and anchor bolt order.
Labels – cETLus conforms to UL STD 1598
and UL STD 8750; Certified to CAN/CSA STD
C22.2 No. 250.0. Suitable for wet locations.
Warranty – 5-year limited warranty, see hew.com/warranty.
8” ROUND ALUMINUM BOLLARD
PHOTOMETRY
Catalog #: OSA8R-L20/840-AC-FT-WHT
FOOTCANDLE DISTRIBUTION
TEST REPORT INFORMATION
XX
Test Report #:
100570727CHI-007
XX
Date: 09/12/12
XX
Lamp Type: LED
XX
Rated Lumens: 1093
XX
Watts: 24.6
XX
Lumens Per Watt: 44.5
XX
CRI: 84
XX
CCT: 3870K
10’
5
2.5
10’
1
.5
10’
10’
FIXTURE DETAILS
SHIELDING
AC Shown
MOUNTING TEMPLATE
ANCHOR BOLT TEMPLATE
PART #92023057-B
MOUNTING DETAILS
Field wiring
• For use with 3/8” dia.
anchor bolts.
• 3” max. bolt projection
above grade.
OSC12R ø14” B.C.
ø11-1/2” B.C
.
OSC10R
OSC8R
ø9-1/2” B.C
Concrete bollard housings are
installed with anchor bolts
embedded in a below grade
footing (by others). All fastening
hardware must not contact soil.
.
45º
2S ø6” B.C.
OSC1
CONDUIT
ENTRY AREA
45º
OSC8R ø3.5”
OSC10R ø3.5”
OSC12R ø3.5”
OSC12S ø4”
45º
4” min.
CURB SIDE
Anchor bolts
Mounting template is provided with each order. A pdf file (not to
scale) of the mounting template is available at www.hew.com.
Bollards
Page 2 of 2
H.E . W illiams, In c.
C ar t hage, Mis s our i
Information contained herein is subject to change without notice.
Electrical conduit
(by others)
w w w.he w.c om
417- 3 5 8 - 4 0 6 5
HEW70375JL REV.06/22/17