University of Groningen
Tasks, hierarchies, and flexibility
van Wezel, Wouter
IMPORTANT NOTE: You are advised to consult the publisher's version (publisher's PDF) if you wish to
cite from it. Please check the document version below.
Document Version
Publisher's PDF, also known as Version of record
Publication date:
2001
Link to publication in University of Groningen/UMCG research database
Citation for published version (APA):
Wezel, W. M. C. V. (2001). Tasks, hierarchies, and flexibility: planning in food processing industries s.n.
Copyright
Other than for strictly personal use, it is not permitted to download or to forward/distribute the text or part of it without the consent of the
author(s) and/or copyright holder(s), unless the work is under an open content license (like Creative Commons).
Take-down policy
If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately
and investigate your claim.
Downloaded from the University of Groningen/UMCG research database (Pure): http://www.rug.nl/research/portal. For technical reasons the
number of authors shown on this cover page is limited to 10 maximum.
Download date: 28-07-2017
References
Allen, J.F., G.M. Ferguson & L.K. Schubert (1996). Planning in Complex Worlds
via Mixed-Initiative Interaction. In: A. Tate (ed.), Advanced Planning Technology,
California: AAAI Press.
Andraski, J.C. (1997). Are you ready for Efficient Consumer Response?
Transportation & Distribution, May, pp 39-46.
Anthony, R.N. (1965). Planning and Control Systems. A framework for Analysis.
Boston: Harvard.
Ashby, W.R. (1984). An Introduction to Cybernetics. New York: Methuen & Co.
Baker, K.R. (1974). Introduction to sequencing and scheduling. New York: John
Wiley & Sons.
Bakker, J. (1995). Classificatie en diagnose voor scheduling situaties. Internal
report. Groningen: University of Groningen.
Beck, H. & A. Tate (1996). Open planning, scheduling and constraint management
architectures. British Telecommunication's Technical Journal, Special Issue on
Resource Management, 1995.
Benbasat, I. & P. Todd (1996). The effects of decision support and task
contingencies on model formulation: A cognitive perspective. Decision Support
Systems 17, pp 241-252.
Benoy, M., P. Dewilde, M. Voet & W. Herroelen (1994). Finite Scheduling: state-ofthe-market. Brussels: Ernst & Young Management Consultants.
Bertrand, J.W.M., J.C. Wortmann & J. Wijngaard. Produktiebeheersing en material
management. Leiden: Stenfert Kroese Uitgevers.
Biggerstaff, T.J. & A.J. Perlis (1989). Software Reusability. Reading, MA: ACM
Press.
Bolander, S.F. & S.G. Taylor (1993). System Framework for Process Flow
Industries. Production and Inventory Management Journal. Q4, 1993.
Bremermann, H.J. (1962). Optimization through evolution and recombination. In: M.
C. Yovits, G. T. Jacobi, and G. D. Goldstein (eds). Self-Organizing Systems.
Washington, DC: Spartan Books.
Breuker, J. & W. van der Velde (Eds.) (1994). CommonKADS library for expertise
modeling: reusable problem solving components. Amsterdam: IOS Press.
Brown, D.E., J.A. Marin & W.T. Scherer (1995). A Survey of Intelligent Scheduling
Systems. In: Brown, D.E. & W.T. Scherer (ed.) (1995). Intelligent Scheduling
Systems. Boston: Kluwer Academic Publishers.
Bruin, S. (1992). Integrated Process Design: Issues and Opportunities. Trans.
IchemE, 70, Part C, 126-130.
155
Coopers & Lybrand (1996). Efficient Consumer Response Europe, Value Chain
Analysis. Project overview.
CBS (2000). Kerncijfers industrie per bedrijfsklasse 1998.
http://www.cbs.nl/nl/cijfers/kerncijfers/lin1610a.htm
Cott, B.J. & M.S. Macchietto (1989). A General Completion Time Determination
Algorithm Using On-line Schedule Modification. Computers and Chemical
Engineering. 13, 1/2, pp. 105-13.
Danek, A.M. & R.J. Koubek (1995). Mapping Perceptual and Cognitive Processing
for the Effective Use of Graphical Displays in Shop Floor Scheduling Tasks. The
International Journal of Human Factors in Manufacturing. Vol. 5, 4, pp. 401-415.
Das, J.P., Karr, B.C. & Parrila, R.K. (1996). Cognitive Planning. New Delhi: Sage.
De Toni, A., & S. Tonchia (1998). Manufacturing Flexibility: a literature review.
International Journal of Production Research, vol. 36, no. 6, pp. 1587-1617.
Dorn, J. (1993). Task-oriented Design of Scheduling Applications. In: J. Dorn &
K.A. Froeschl (ed.). Scheduling of production processes. Chichester, England: Ellis
Horwood.
Dorn, J., M. Girsch & Nikos Vidakis (1996). DÉJÀ VU – A Reusable Framework for
the Construction of Intelligent Interactive Schedulers. Proceedings of the
international conference on Advances in Production Management Systems (APMS
November ’96).
Dutton, J.M. (1964). Production scheduling – a behavioral model. The International
Journal of Production Research. Volume 3, no. 1.
Eberts, R.E. (1994). User Interface Design. New Jersey: Prentice Hall.
Ehlers, E.M. & E. van Rensburg (1996). An object-oriented manufacturing
scheduling approach. IEEE Transactions on systems, man, and cybernetics - part
A: systems and humans, vol. 26, no. 1, p. 17-25.
Fikes, R.E., & N.J. Nillson (1971). STRIPS: a New Approach to the Application of
Theorem Proving to Problem Solving. Artificial Intelligence, 2, pp 189-208.
Food Engineering (1995). ECR: The impact on manufacturing. Food Engineering,
February, pp. 42-50.
Fox, M.S. & S. Smith (1984). ISIS: A Knowledge-Based System for Factory
Scheduling. Expert Systems Journal, 1, 1, pp. 25-49.
Fransoo, J.C. & W.G.M.M. Rutten (1994). A Typology of production control
situations in process industries. International Journal of Operations & Production
Management, 14, 12, pp. 47-57.
Fukunaga, A., G. Rabideau, S. Chien & D. Yan (1997). Towards an Application
Framework for Automated Planning and Scheduling. In: Proceedings of IEEE
Aerospace Conference, Snowmass, CO.
Galbraith, J. (1973). Designing complex organizations. Reading, Massachusetts:
Addison-Wesley Publishing Company.
156
Gazendam, H.W.M. (1993). Variety controls variety: on the use of organizational
theories in information management. Groningen: Wolters-Noordhoff
Giebels, M. (2000). EtoPlan: a concept for concurrent manufacturing planning and
control. PhD Thesis, Enschede: University of Twente.
Green, J. (1996). Manufacturers meet global market demands with FCS software. IIE
Solutions, 28, 8, pp. 26-31.
Hammond, K.J. (1989). Chef. In: Riesbeck, C.K. & Schank, R.C. (1989). Inside
case-based reasoning., Chapter 6. Hillsdale, New Jersey: Lawrence Erlbaum
Associates.
Hayes-Roth, B. & Hayes-Roth, F. (1979). A cognitive model of planning. Cognitive
Science, 3, pp. 275-310.
Henke, A. (1994). Scheduling space shuttle missions: using object-oriented
techniques. AI Expert, march 1994, pp 16-24.
Hildum, D.W., N.M. Sadeh, T.J. Laliberty, S.F. Smith, J. McA’Nulty & D. Kjenstad
(1997). Mixed-Initiative Management of Integrated Process-Planning and
Production-Scheduling Solutions. In: Proceedings of the ninth conference on
innovative applications of Artificial Intelligence, July 1997
Hofstede, G.J. (1992). Modesty in modeling : on the applicability of interactive
planning systems, with a case study in pot plant cultivation. PhD Thesis,
Wageningen: University of Wageningen.
Houghton, E. & V. Portougal (1997). Reengineering the production planning process
in the food industry. International Journal of Production Economics, 50, pp. 105116
Hutchins, R. (1997). Category management in the food industry: a research agenda.
British Food Journal. 99/5, pp. 177-180.
Jakeman, C.M. (1994). Scheduling needs of the food processing industry. Food
Research International, 27, p. 117-120
Jorna, R.J. & W. van Wezel (1997). Knowledge-based planning support, SEC, and
local differences. The Journal of Management and Economics; An Electronic
Journal. Vol. 1, No. 1.
Jorna, R.J., Gazendam, H., Heesen H.C.& Wezel W. van (1996). Plannen en
Roosteren: Taakgericht analyseren, ontwerpen en ondersteunen. Lansa:
Leidschendam. (Planning and Scheduling: task oriented analysis, design and
support).
Dean, T. & J. Kirman (1996). Challenges for theory and practice in planning. In: A.
Tate (ed.), Advanced Planning Technology, California: AAAI Press.
Klir, G.J. (1991). Facets of systems science. New York: Plenum Press.
Kondili, E., C.C. Pantelllides & R.W. Sargent (1993). A general algorithm for shortterm scheduling of batch operations – I. MILP formulation. Computers chem.
Engng, 17, 2, pp. 211-227.
157
Koste, L.L. & M.K. Malhotra (1999). A theoretical framework for analyzing the
dimensions of manufacturing flexibility. Journal of Operations Management, 18,
75-93.
Liu, Z.H. & S. Macchietto. On-line Scheduling of Batch Processes in Food
Applications. In: Proceedings Il Giornata di studio sui processi Batch: Dalla
standardizzazione degli impianti batch all’integrazione della catena proddutiva,
Milano: ANIPLA.
Lofvers, M. (1998). Grote ontevredenheid over productieplanning. IT Logistiek, 2, 4,
pp. 74-77.
Macchietto, S. (1996). Batch food processing: the proof is in the eating. Proceedings
Chemical Process Control Conference, CPCV, Granlibakken, Cal., USA, Jan. 7-12
1996
McKay, K.N., F.R. Safayeni & J.A. Buzacott (1988). Job-Shop Scheduling Theory:
What Is Relevant? Interfaces, 18, 4, pp. 84-90.
McKay, K.N., F.R. Safayeni & J.A. Buzacott (1989). The scheduler’s knowledge of
uncertainty: the missing link. In: J. Browne (ed.). Knowledge based production
management systems. North-Holland: Elsevier Science Publishers.
McKay, K.N., F.R. Safayeni & J.A. Buzacott (1995). ‘Common sense’ realities of
planning and scheduling in printed circuit board production. International Journal
of Production Research. Vol. 33, No. 6, pp. 1587-1603.
Mesarovic, M.D., D. Macko & Y. Takahara (1970). Theory of hierarchical,
multilevel, systems. New York: Academic Press.
Meulenberg, M.T.G. & J. Viaene (1998). Changing food marketing systems in
western countries. In: Jongen, W.M.F. & M.T.G. Meulenberg (Eds.). Innovation of
Food Production Systems: Product Quality and Consumer Acceptance.
Wageningen Press, Wageningen, The Netherlands, pp. 8-36.
Mietus, D.M. (1994). Understanding planning for effective decision support. PhD
Thesis, Groningen: University of Groningen.
Miller, G.A., Galanter, E. & Pribram, K.J. (1960). Plans and the structure of
behavior. Holt, Rinehart and Winston.
Mintzberg, H. (1979). The structuring of organizations. Englewood Cliffs, NJ:
Prentice-Hall.
Moret, Ernst & Young (1995). Logistieke Pakketten Food 95/96. Utrecht: Moret,
Ernst & Young.
Nakhla, M. (1995). Production control in the food processing industry: the need for
flexibility in operations scheduling. International journal of operations &
production management, 15(8), p. 73-88
Nauta, A. & K. Sanders (2000). Causes and consequences of perceived goal
differences between departments within manufacturing organizations. Som
Research Report 00A46, Groningen: University of Groningen.
158
Newell, A. (1981). The knowledge level. AI Magazine, 2(2):1-20.
Newell, A. & H.A. Simon (1972). Human Problem Solving. Englewood Cliffs, New
Jersey: Prentice-Hall.
Newell, A. & H.A. Simon (1976). Computer science as empirical inquiry: symbols &
search. Communications of the ACM, 19, 113-126.
Newell, A. (1990). Unified Theories of Cognition. Cambridge: Harvard University
Press.
Olhager, J. & J. Wikner (2000). Production planning and control tools. Production
planning & control, vol. 11, no. 3, pp. 210-222.
Pillutla, S.N. & B.N. Nag (1996). Object-oriented model construction in production
scheduling decisions. Decision Support Systems : the international journal, 18, p.
357-375.
Pinedo, M., X. Chao, & A. Feldman. LEKIN Scheduling system.
http://www.stern.nyu.edu/om/pinedo/lekin/
Pinedo, M. & B. P.-C. Yen (1997). On the design and development of objectoriented scheduling systems. Annals of Operations Research, 70, p. 359-378.
Prietula, M.J., Wen-Lin Hsu, Peng Si Ow & G.L. Thompson (1994). MacMerl:
Mixed-Initiative Scheduling with Coincident Problem Spaces. In: Zweben & Fox
(ed.), Intelligent Scheduling. San Fransisco, California: Morgan Kaufmann
Publishers.
Prietula, M.J., W. Hsu, D.M. Steier, & A. Newell (1993). Applying an Architecture
for General Intelligence to Reduce Scheduling Effort. In: Rosenbloom, P.S., J.E.
Laird, & A. Newell. The Soar Papers; Research on Integrated Intelligence.
Cambridge, Massachusetts: The MIT Press.
Raaymakers, W.H.M. (1999). Order acceptance and capacity loading in batch
process industries. PhD Thesis, Eindhoven: Technical University of Eindhoven.
Rich, E. & K. Knight (1991). Artificial Intelligence. New York: McGraw-Hill.
Riesbeck, C.K. & Schank, R.C. (1989). Inside case-based reasoning. Hillsdale, New
Jersey: Lawrence Erlbaum Associates.
Rutten, W. (1995). The use of recipe flexibility in production planning and inventory
control. Eindhoven: Eindhoven University of Technology.
Sacerdoti, E.D. (1975). The Nonlinear Nature of Plans. Proceedings of the Fourth
International Joint Conference on Artificial Intelligence, pp. 206-214.
Sanderson, P.M. (1989). The Human Planning and Scheduling Role in Advanced
Manufacturing Systems: An Emerging Human Factors Domain. Human Factors, 31
(6), pp. 635-666.
Schartner, A. & J.M. Pruett (1991). Interactive Job Shop Scheduling: An
Experiment. Decision Sciences, 22, pp. 1024-1046.
Schreiber, G., B. Wielinga & J. Breuker (1993). KADS. A principled approach to
knowledge-based system development. London: Academic Press.
159
Sharit, J. (1985). Supervisory control of a flexible manufacturing system. Human
Factors, 27(1), pp 47-59.
Simon, H.A. (1960). The new science of management decision. New York, NY:
Harper and Row.
Simon (1985). The sciences of the artificial. Cambridge, Massachusetts: The MIT
Press.
Slack, N., S. Chambers, C. Harland, A. Harrison & R. Johnston (1998). Operations
Management (2nd edition). London: Financial Times Management.
Sloot, L. & M. van Kleef (1996). ECR: Tovermiddel of hocus-pocus? Tijdschrift
voor marketing, June, pp. 36-40.
Smith, S.F. & M. Becker (1997). An Ontology for Constructing Scheduling Systems.
In: Working Notes of 1997 AAAI Symposium on Ontological Engineering. Stanford,
CA: AAAI Press.
Smith, D.R., E.A. Parra & S.J. Westfold (1996). Synthesis of Planning and
Scheduling Software. In: Tate, A. (Ed.). Advanced Planning Technology. Menlo
Park, CA: AAAI Press.
Smith, S.F, O. Lassila & M. Becker (1996). Configurable, Mixed-Initiative Systems
for Planning and Scheduling. In: Tate, A. (Ed.). Advanced Planning Technology.
Menlo Park, CA: AAAI Press.
Smith, S.F. & M. Becker (1997). An Ontology for Constructing Scheduling Systems.
Working Notes of 1997 AAAI Symposium on Ontological Engineering. Stanford,
CA: AAAI Press.
Smith, S.F. & O. Lassila (1994). Toward the Development of Flexible MixedInitiative Scheduling Tools. In: Proceedings ARPA-Rome Laboratory planning
initiative workshop, Tucson, AZ.
Smith, S.F. (1992). Knowledge-based production management: approaches, results
and prospects. Production Planning & Control, 3, 4, pp. 350-380.
Smith, S.F. (1994). OPIS: A Methodology and Architecture for Reactive Scheduling.
In: Zweben, M. & Fox, M.S. Intelligent Scheduling. San Francisco: Morgan
Kaufman.
Smith, S.F. (1995). Reactive Scheduling Systems. In: Brown, D.E. & W.T. Scherer
(ed.) (1995). Intelligent Scheduling Systems. Boston: Kluwer Academic Publishers.
Starr, M.K. (1979). Perspectives on disaggregation. In: L.P. Ritzman, L.J. Krajewski,
W.L. Berry, S.H. Goodman, S.T. Hardy & L.D. Vitt (eds.). Disaggregation.
Problems in Manufacturing and Service Organizations. Bosten: Martinus Nijhoff
Publishing.
Sundin, U. (1994). Assignment and Scheduling. In: Breuker, J. & W. van der Velde
(Eds.), CommonKADS library for expertise modeling: reusable problem solving
components. Amsterdam: IOS Press.
160
Suresh, V. & D. Chaudhuri (1993). Dynamic scheduling – a survey of research.
International journal of production economics, 32, pp. 53-63.
Tate, A. (1993). The Emergence of “Standard” Planning and Scheduling System
Components - Open Planning and Scheduling Architectures. In: European
Workshop on Planning (EWSP ’93).
Ten Kate, H. (1995). Order acceptance and production control. PhD Thesis,
Groningen: University of Groningen.
Thompson, J. D. (1967). Organizations in Action. New York: McGraw-Hill.
Van Dam, P. (1995). Scheduling Packaging Lines in the Process Industry. PhD
Thesis, Groningen: University of Groningen.
Van Dam, P., G.J.C. Gaalman & G. Sierksma (1993). Scheduling of packaging lines
in the process industry: an empirical investigation. International Journal of
Production Economics, 30-31, pp. 579-589.
Van den Berg, M.G. (1993). Kwaliteit van levensmiddelen. Kluwer: Deventer.
Van der Vorst, J.G.A.J. (2000). Effective Food Supply Chains; Generating, modeling
and evaluating supply chain scenarios. PhD Thesis, Wageningen: University of
Wageningen.
Van Donk, D.P. & P. van Dam (1996). Structuring complexity in scheduling: a study
in a food processing industry, International Journal of Operations & Production
Management, 16, 5, 54-63
Van Putten, J., N. Scharenborg & A. Woerlee (1993). A Generic User Interface
Constructor for Planning and Scheduling Applications. Proceedings of the HCI'93
Conference on People and Computers VIII.
Van Wezel, W. & D.P. van Donk (1996). Scheduling in Food Processing Industries:
Preliminary Findings of a Task Oriented Approach. In: Bertrand, Jafari, Fransoo &
Rutten (1996). Second International Conference on Computer Integrated
Manufacturing in the Process Industries – Proceedings, pp. 545-557.
Van Wezel, W., D.P. van Donk & G. Gaalman (2001). Coping with Flexibility:
Scheduling in Food Processing Industries. In preparation.
Van Wezel, W. & R.J. Jorna (2001). Paradoxes in Planning. Engineering
Applications of Artificial Intelligence, Vol. 14/3, pp. 269-286
Van Wezel, W. & R.J. Jorna (1999). The SEC-system: reuse support for scheduling
system development. Decision Support Systems, Volume 26, Number 1, July 1999.
Van Wezel, W. & R.J. Jorna. (1997). The SEC-system, Reuse Support for Scheduling
System Development. Som Research Report 97A11, Groningen: University of
Groningen.
Van Wezel, W., R.J. Jorna & D. Mietus (1996). Scheduling in a generic perspective.
International Journal of Expert Systems; research and applications, 3 (9), pp. 357381.
161
Van Wezel, W.M.C. (1994). De SEC-methodiek; ontwikkelen van schedulingapplicaties. Groningen: Internal report, University of Groningen.
Veloso, M.M. (1996). Towards Mixed-Initiative Rationale-Supported Planning. In:
Tate, A. (Ed.). Advanced Planning Technology. Menlo Park, CA: AAAI Press.
Verbraeck, A. (1991). Developing an Adaptive Scheduling Support Environment.
PhD Thesis, Delft: University of Delft.
Volberda, H.W. (1992). Organizational Flexibility. Change and Preservation.
Groningen: Wolters-Noordhoff.
Vollmann, T.E., W.L. Berry & D.C. Whybark (1997). Manufacturing Planning and
Control Systems. New York: Irwin/McGraw-Hill.
Waern, Y. (1989). Cognitive Aspects of Computer Supported Tasks. Wiley & Sons:
Chichester.
Wennink, M. & M. Savelsbergh (1996). Towards a planning board generator.
Decision Support Systems : the international journal, 17(3), p 199-226.
Wiers, V.C.S. (1996). A quantitative field study of the decision behavior of four
shop floor schedulers. Production planning & control, vol. 7, no. 4, pp. 383-392.
Wilkins, D.E. (1990). Can AI planners solve practical problems? Computational
Intelligence, 6 (4), pp. 232-246.
Willemse, J.N. (1996). Het kwaliteitsdenken in ketens. Ketenlogistiek. NRLOrapport nr. 96/3, 24-31. Den Haag: NRLO.
Woerlee, A.P. (1991). Decision Support Systems for Production Scheduling. PhD
Thesis, Rotterdam: Erasmus University Rotterdam.
Wolf, G. (1994). Schedule management: an object-oriented approach. Decision
Support Systems : the international journal, 11, pp. 373-388.
162