1
AUTOMOTIVE REFINISH PRODUCTS
™
Acrylic Enamel — Émail Acrylique — Esmalte Acrílico
Corvette Yellow**
FA656 50329
Omaha Orange**
FA640 50343
Viper Red**
FA648 45963
Swift Red**
FA671 50335
Candy Apple Red†
FA673 50342
Light Blue Metallic*
FA662 50352
Teal Metallic†
FA621 50363
Spectre Blue Metallic*
FA692 50356
Hi Lite Blue Pearl*
FA625 50357
Dark Blue Metallic†
FA627 60141
Wine Red Mica†
FA641 74298
Blaze Red Crystal Pearl*
FA642 67116
Imperial Orange Metallic*
FA674 66851
Gold Metallic*
FA639 54433
Champagne Pearl*
FA680 55700
Jaguar Racing Green Metallic†
FA699 50360
Dark Green†
FA633 50358
Galaxy Silver Metallic*
FA683 57059
Charcoal Mist Metallic†
FA638 57616
Brilliant Black Pearl†
FA682 63818
Olympic White**
FA655 34851
Fleet White**
FA659 50326
Pure White**
FA658 50325
Wimbledon White**
FA652 50324
Coach Black†
FA689 1738
BLACK — Factory Package Color
RED — Intermix Formula
These color chips are intended to be used only as a reference
and may not be exact representations of mixed or applied color.
†
Black sealer recommended.
*Gray sealer recommended.
**White sealer recommended.
AS2772
1
AUTOMOTIVE REFINISH PRODUCTS
™
DESCRIPTION
MIXING
4
Finish 1 is a high performing 3.5 VOC Acrylic Enamel offering
excellent gloss and metallic control. For optimum performance, use
of the recommended sealer is suggested.
HARDENER TEMPERATURE RANGE
+
1
FINISH 1
Hardener
3.5 Color
FH611 60°-70°F (air dry only)
FH612 65°-85°F
FH613 80°F and above
APPLICATION
• Apply 2 medium wet coats or until uniform color is achieved.
• Allow each coat to flash until handslick. • Adjust air pressure to 10 psi HVLP
• Adjust air pressure to 40-45 psi conventional gravity feed
DRYING SCHEDULE
Air Dry:
Out of Dust – 30 minutes @ 70° F
To Deliver – Overnight
Force Dry:
Buffing Times*:
*Buffing of Metallic Colors may cause streaking. Only a light
polishing of metallic colors is recommmended.
30 minutes at 120° F surface temperature
Air Dry – After 24 hours
Force Dry – 30 minutes after cool down