Intuitive IN WALL BOX
ID-IWB-1
The ID-IWB-1 finally gives you the ability to mount your flat screen…flat to the wall.
With its versatile mounting ability and integrated punch-out system, it will help with
any flat panel installation. You can now easily hide components and power protection
inside the wall, organized and protected. You now have the ability to complete your
component installation before installing the TV. Made from powder coated steel, the
box is durable and appealing.
• Easily retrofit installation into any 2x4 wall. Fitting into 12”oc or larger stud
Bays, the ID-IWB-1 is as simple as mounting an in-wall speaker.
• Unique "dog ears" allow the enclosure to be floated within the wall cavity, or
simply add support to the drywall after stud mounting.
• Don’t worry about existing wires in the wall. After mounting, you will have
over 1/2" of clearance behind the enclosure for running wires.
• The innovative breadboard backing allows for easy installation using our
ID-UMB-1 Universal Mounting Bracket, or even just wire ties.
• Directly mount almost anything to the back of the enclosure...your power
protection, room processor or even a small satellite box.
• Connect and test everything before hanging the display.
• Power management is a cinch, with built-in locations for your high volt
boxes.
• With multiple Decora punch-outs around the edge, you will always have
great access to all of your connections.
• Built from powdercoated steel, the enclosure will show the quality that your
clients expect from a professional installation.
Part Number
Dimensions:
Weight
ID-IWB-1
Cut-out
14.375” x 10.375”
Overall
15.75”w x 11.75”h x 3.25”d
Unit
3.7 Lbs.Ea.
Shipping
5.6 Lbs Ea.
Punch-Outs
6 Decora
2 Power
Breadboard
1/2” On Center
Dog Ears
4 Locations
Color
Off White
Intuitive, LLC. 2130 W. Carefree Hwy, Suite 1-323, Phoenix Arizona 85086. PH:602.759.9559
Copyright Intuitive Designs 2012. All rights reserved. Intuitive is a trademark of Intuitive LLC.