WELCOME!
A getting started guide for
your home arcade!
Getting Started
1. Your power cord is inside your coin catcher box
 Use the keys provided to open
your arcade cabinet’s coin door.
 Locate and remove your coin
catcher box. Your power cord
will be inside this box.
 Replace your coin catcher box.
 Before closing the arcade cabinet,
notice a small dial control panel
inside the cabinet. This is your
volume control.
2. Your game is plug-and-play!
 Now that you’ve closed your arcade cabinet, simply plug in
your game and turn it on. Your game may take a minute to
boot. Now you’re ready to select from your multicade’s list of
games!
3. Game Selection and Game Changing
Game Selection



To scroll through your list you can move the joystick up and
down for one-by-one scrolling, or left and right for page-bypage scrolling.
Use the 1 Player Start button to load the highlighted game.
Once the game has loaded, you can push either 1 or 2 Player
Start button to add credits for one or two players respectively
(i.e. you cannot use the 2 Player Start button in the game list
to start a 2 player game. You must first load the game, then
add players).
1 Player Button

[1033, 3-sided Arcade ONLY]
to access vertical games from the horizontal
game menu: press the 1 Player’s ‘B’ button on the
horizontal player panel while looking at the horizontal game
list.
to access horizontal games from the vertical
game menu: press the 1 Player’s ‘B’ button on the
vertical player panel, while viewing the vertical game list.
Horizontal Player Panel’s
1 Player ‘B’ button
Vertical Player Panel’s
‘B’ button.
*technically, you want to
be on the side with the
1/ 2 player buttons like
shown above.
Game Changing
412, 621, 1033 Arcades ONLY
 Press and hold the 1 Player Start button for 5 seconds.
This will open the game exit menu. Scroll down to ‘exit’
and use the 1 Player Start button again to select ‘exit’.
60 Arcade ONLY
 Once you finish the game you are playing, you will
automatically be taken back into the gamelist.
 Troubleshooting:
Is your game stuck on one game?
Your game will remain for as many games
as you have credits. If you have
overloaded credits into one game and
wish to play another, you can simply turn
off the arcade and restart it. Again, this is
for the 60 game Arcade only.
Any other problems getting started, or just have questions?
Email [email protected] for help
Visit www.MicroPacmanArcades.com for support
Or Call MicroPac himself at (949) 241-0677!
Very Happy to help! Game on!