EnviroTemp - efficiency
solutions for HVAC
equipment
Increase your HVAC efficiency by 10 to 20% overnight!
EnviroTemp is a highly concentrated thermo-conductive, oil based additive aimed at dislodging
oil build up in air conditioning, chiller or refrigeration units.
The liquid is injected directly into the compressor of the unit, where EnviroTemp molecules then
dislodge the oil build-up within the system and form a permanent protective layer inside the heat
exchangers. The refrigerant can then contact directly with the metal surfaces of the exchanger,
increasing heat transfer and maximising efficiency.
The EnviroTemp formulation also contains various
compounds to further protect a treated system such as:
• Metal conditioners and stabilizers
• Antioxidants & corrosion inhibitors
• Seal conditioners
• Acid scavengers
• Water displacement additives
You may know that heating, ventilating, and air conditioning (HVAC) accounts for up to 70% of
a total power bill for any building.
What you may not know is there is a design flaw that exists in almost every piece of HVAC equipment in the world, including the
units at your home and business. Ask your HVAC technician if AC units lose S.E.E.R. over time. What they may not know is why.
1300 73 93 55
[email protected]
Distributed in Australia by
integratedpower.net.au
The Problem - “OIL FOULING”
CYLINDER
A.S.H.R.A.E. (American Society of Heating, Refrigeration and Air-conditioning
RINGS
Engineers) has studied this problem for decades. A.S.H.R.A.E. estimates that
“oil fouling” accounts for up to a 30% reduction in efficiency within the
first 5 years of the equipment’s life reducing the units S.E.E.R. rating as the
equipment ages. Oil fouling is defined as the accumulation of unwanted oil
deposits in the coil system.
Liquid trace amounts
of oil mix with
refrigerant during
compression stroke.
PISTON
OIL
OIL RESERVOIR
As studied by A.S.H.R.A.E., during the refrigerant compression process, oil
migrates from the compressor to the coil system contaminating the metals that
transfer heat.
The A.S.H.R.A.E. state the typical system can lose up to 30% of its efficiency
within the first few years. Typical system energy efficiency losses are:
• 1st Year - 7% • 2nd year - 5% • 2% per year after
The Solution - EnviroTemp
EnviroTemp is specifically designed to enhance the overall performance of any air conditioning and
refrigeration system without modifications or alterations to the system itself.
EnviroTemp offers significant energy cost savings for all types of commercial, residential and vehicle cooling equipment. Installing EnviroTemp can
increase HVAC equipment efficiency by up to 20-40%, resulting in overall energy savings of up to 10-20%.
EnviroTemp is designed to enhance the overall performance of any air conditioning or refrigeration system without equipment down-time or
modification.
Before EnviroTemp
After EnviroTemp
Laminar Friction causes the refrigerant to travel like a
bullet with a sharp point which drives up energy use,
increases wear and tear, shortens the life of your system
and reduces your system’s ability to produce quick and
efficient comfort.
Installation of EnviroTemp can reduce
energy and improve C.O.P by 8-12%. Some
customers have witnessed improvements in
excess of 18%.
EnviroTemp
thermoconductive
molecules
Oil Fouling
Energy
robbing
deposits of
stagnant and
non-conductive
lubricating oil
Energy loss due to a significantly reduced contact point
between the refrigerant and heat transfer surface
1300 73 93 55
[email protected]
Heat
sinking
thermoconductive
molecules in
circulation
Energy gain due to a greater contact point of the
refrigerant with the heat transfer surface
Distributed in Australia by
integratedpower.net.au
Benefits of EnviroTemp
PERFORMANCE
INSTALLATION
• Reduces HVAC energy costs by up to 10 -20%
• Quick and easy installation
• Improves compressor performance
• Minimal equipment downtime
• Extends the life of your equipment
• No equipment modifications
• Reduces greenhouse gas emissions
• Immediate results
Increased performance
Improved efficiencies
Reduced costs
Graph showing the effect of oil fouling on heat transfer
without EnviroTemp
Applications
105%
• Chillers
• Split Systems
100% Efficient after EnviroTemp Installation
100%
EFFICIENCY
• Packaged Units
• Refrigerated Transport
• Wall / Window Units
• Automobiles
95%
12% drop in efficiency
without EnviroTemp
90%
85%
• Ice Machines
• Cold Storage / Freezers / Cool Rooms
80%
0
1
2
YEAR
3
4
Source: ASHRAE Winter Symposium
1300 73 93 55
[email protected]
Distributed in Australia by
integratedpower.net.au
5
Australian EnviroTemp Case Studies
ANZ Adelaide bank installed EnviroTemp in a Carrier 30DA060 (reciprocating)
chiller at the ANZ Data Centre, Adelaide, South Australia. The cooling capacity
increased by 25.8% along with a 33% increase in COP%. These results were verified
by the Regency Institute of TAFE.
EnviroTemp Chiller blend was installed for AMP/Henderson Global Investors in
Chiller #2, a York YT- D3-E3 centrifugal, at AMP Bourke Place in Melbourne,
Victoria. The COP increased by 16.3%.
Some global organisations who use EnviroTemp
NOTE: Envirotemp is sold under the trademark ‘Permafrost’ in some countries.
1300 73 93 55
[email protected]
Distributed in Australia by
integratedpower.net.au