Proposal of Threshold Modifications of MQW and P1 and P2 MQTL

Proposal of Threshold
Modifications of MQW and P1 and
P2 MQTL BLMs in IR7
Matti Kalliokoski
18th BLM Thresholds WG Meeting
17/08/2015
Introduction
•
Analysis made by Alessio shows that several
monitors in IR7 will surpass their thresholds
with maximum intensity due to debris from
collimators
• The analysis was made in comparison with
the thresholds that are currently in the
machine
•
Not the new thresholds which are foreseen to be
implemented around TS2
17/08/2015
Matti Kalliokoski - 18th BLM Thresholds WG Meeting
2
Comparison of Values
Element
MQW
Old
Threshold
MF=1.0
[Gy/s]
New
Required Ratio
Ratio
Threshold Threshold Required / Required /
MF=0.1
[Gy/s]
Old
New
[Gy/s]
2.43E-01 1.33E-02 2.77E-01 1.14
20.8
MQTL P1 4.06E-03 9.77E-05 3.50E-03 0.86
35.8
MQTL P2 4.18E-04 9.77E-05 8.94E-04 2.14
9.15
17/08/2015
•
•
The analysis by Alessio
was made with using
current applied
thresholds with MF=1.0
In the new thresholds
MF=0.1 was foreseen for
LS families
•
Seems to be too low
Matti Kalliokoski - 18th BLM Thresholds WG Meeting
3
THRI_MQW vs THRI.LS_MQW
17/08/2015
Matti Kalliokoski - 18th BLM Thresholds WG Meeting
4
THRI.(IP7).LS_MQW_FT Proposal
•
•
•
Proposed thresholds will be set using MF=1.0
RS9 set to 2.77E-1, others fixed to RS9 with an ad-hoc correction
Needed only for IR7?
• “Standard” thresholds for IR3 with MF=1.0
Running Sum
RS01
RS02
RS03
RS04
RS05
RS06
RS07
RS08
RS09
RS10
RS11
RS12
Ratio FT/Std
1
1
1
1
1
1
1
1.04
2.07
4.60
4.62
4.62
17/08/2015
Matti Kalliokoski - 18th BLM Thresholds WG Meeting
5
THRI_B1.1_MQTLH vs
THRI.LS.P1_MQTL
17/08/2015
Matti Kalliokoski - 18th BLM Thresholds WG Meeting
6
THRI.IP7.LS.P1_MQTL_FT
Proposal
•
•
Proposed thresholds will be set using MF=1.0
RS9 set to 3.5E-3, others fixed to RS9 with an ad-hoc correction
Running Sum
RS01
RS02
RS03
RS04
RS05
RS06
RS07
RS08
RS09
RS10
RS11
RS12
Ratio FT/Std
1
1
1
1
1
1
1
1.96
3.58
9.14
13.21
13.73
17/08/2015
Matti Kalliokoski - 18th BLM Thresholds WG Meeting
7
THRI_B1.2_MQTLH vs
THRI.LS.P2_MQTL
•
•
By using MF=1.0, RS09 is ok, FT from RS10?
With MF=0.1, RS9 set to 8.94E-04 Gy/s, FT correction from RS08
17/08/2015
Matti Kalliokoski - 18th BLM Thresholds WG Meeting
8