Mannequins – manual handling using “handcuffs” Safe Work MS Page 1/3 Safe Work Method Statement Mannequins – manual handling using “handcuffs” RISK ASSESSMENT NUMBER S.O.P NUMBER RISK ASSESSMENT Medium DATE CREATED 12 June 2014 Employees Involved in SOP Creation Jane Stephenson Shelly McClean Louella Bailey Susan Brougham Cyle Sprick Personal Protective Equipment Required REVIEW Review due 2019 Closed in shoes Before work Commences Ensure floor is clear No trip hazards Staff informed and trained in manual handling and equipment Basic Task Step(s) Hazards Trained staff required to lift Heavy and move Awkward Floor is clear from trip Crushing hazards Tripping Ensure adjustable height Unstable loads when levels when moving and moving storing mannequins Trapping fingers from Utilize lifting devices moveable parts provided- Promed lifter /Pat Fluids - spills slide. Promed lifter brakes not Select appropriate sling locked Store mannequins safely CPR Only - storage boxes heavy Safe Procedures Trained staff - two person lift Label all mannequins as ‘Two Person Lift’ Adjustable height levels - beds/ chairs are at correct waist height Ensure brakes are on bed/chair trolley / lifter Bedford Mannequins disconnect @ waist - half torso Select appropriate sling for mannequin and attach Ensure item is secure before the lift Two staff members one to push lifter and one to guide to correctly position Store mannequins safely at correct waist height storage Use sack truck to move CPR mannequin’s cases as per physiotherapist. Safe Work MS Mannequins – manual handling using “handcuffs” Page 2/3 http://trueplasticsurgery.wordpress.com/ Handcuffs…er Manual Handling aid We have recently started moving our manikins on and off beds and various shelves using a typical spinal board. Nothing new here. We often wrap them up in a sheet which works really well to keep everything contained and keeps the dust off for longer term storage. For quicker moves – particularly for BLS practice on the floor where you don’t want a sheet (like you would on a bed), the manikins become a bit more awkward with their arms falling down. The solution to this was a simple strap with loops in the ends like a set of handcuffs. This is easy to store and use and prevents the arms from falling down while rolling on/off a backboard whether it’s onto the floor or a bed or shelf. Once on the backboard, ANY trolley/cart will serve to help move them around. Much more maneuverable than a bed or even an ambulance barouche. The strap is about 600mm long with about 150mm ‘long’ (300-400mm circumference) loops in each end. About 1 meter of simple webbing = $1. Safe Work MS Mannequins – manual handling using “handcuffs” Page 3/3 There has been a new requirement to label heavier manikins with warning signs indicating two-person handling was required. We have added these signs to the handcuffs. Reviewed for use in area________________________________________ Reviewer name________________________________________________ Reviewer signature_____________________________________________ Supervisor name______________________________________________ Supervisor signature___________________________________________
© Copyright 2025 Paperzz