Ashmore Hall Auditorium --- Room 119
“Smart Classroom” System
Overview & Operation Guide
Features of the system:
Manually-Operated Front Projection Screen
Features of the system: High-Resolution XGA
(1024x768) High Brightness (3000 ANSI lumens)
LCD Projector suspended from the ceiling.
Sharp XG-C50X
Other features of the system: New equipment
has been added to the existing Equipment Rack
located in the AV Room.
DVD Player & New Control
System w/Color LCD
Touchpanel
Other features of the system: Desk-Mounted
“Table Buddy” provides Laptop Computer
Video & Audio inputs
Laptop Input located
on the edge of the
desk in the 2nd row.
Desk-Mounted “Table Buddy” provides Laptop
Computer Video & Audio inputs
Connect to the 15-Pin HD
jack from the (monitor)
output of your laptop
computer.
Connect the audio
from the laptop
computer’s stereo
headphone jack.
Desk-Mounted “Table Buddy” provides Laptop
Computer Video & Audio inputs
Front View
VGA 15-pin HD Connection for computer
video and a 3.5mm Stereo MiniJack for
computer audio.
NOTE: VGA Cable with audio is available
and stored in the drawer located in the
equipment rack.
Side View
Be sure this device does not get unplugged
from the AC outlet located down near the
floor. The laptop signal will not reach the
projection system should either of the AC
plugs be disconnected.
Other features of the system: Wall-Mounted
Input Plates for Secondary Computer Input
w/Audio and a Microphone Input
Wired Microphone input
to the sound system.
The #2 computer input to the projection
system is located near the floor, in the
right-hand corner of the wall behind the
projection screen.
Wireless Color LCD Touchpanel Remote Control
 Operates all Audio-Visual Equipment 
Wireless Touchpanel
Charging Base
The touchpanel is stored in the
A/V Equipment Room. It
should remain on the charging
base “when not in use”.
1. Simply touch the surface of the panel and AASU Logo appears. This
is referred to as the “START PAGE”.
2. Touch the “START PAGE” a second time and the system is activated.
Once the system is activated all the video and audio equipment is
“powered up” and ready for use. Touching the surface a second time
also takes you directly to the “SYSTEM OPTIONS PAGE”.
NOTE: The AASU logo also appears when system power is turned off.
Simply touch the “SOURCE MENU” button
to select the equipment you want to operate.
The “SOURCE MENU” will appear and provide
you with the various choices of equipment you
can operate during your presentation.
This is the “SOURCE MENU” as you can see
you have various types of equipment and
inputs to the LCD projection and sound
system that you can utilize to present your
information electronically to the students.
LCD Touchpanel Control: Source Selection –
Audio Cassette Deck
When you touch the “CASS” button the
“Audio Cassette Functions” will appear.
Select Source by pressing the
surface of the touchpanel.
Available sources for visual
display:
 VCR
 DVD
 Laser Disc
 Computer– Input 1
 Aux Computer – Input 2
 Aux Video w/Audio
Available sources and/or
inputs for audio playback:
 Audio Cassette Deck
 CD playback via DVD Player
 L/R Audio Jacks of the Aux
Video Input
Note: Source is highlighted when selected by depressing touchpanel surface.
Audio Cassette Function Page
STOP --- Stops playback
of cassette tape.
PAUSE –-Press to
pause playback of the
cassette tape.
PLAY--- Starts
playback of audio
cassette tape.
FAST FORWARD:
Provides high speed
forward advance of the
cassette tape.
REWIND: Provides high
speed reverse/rewind of
the cassette tape.
Note: Volume Control appears on all pages where it is required
LCD Touchpanel Control: Source Selection
– DVD or Compact Disc
When you touch the “DVD & CD” button the “DVD
Menu Control” Navigation Page appears.
Note: Source is highlighted when selected by depressing touchpanel surface.
MENU – Returns you
to the DVD Main Menu
DVD & CD Navigation Page
Use the Up/Down
and Left/Right Arrow
buttons to navigate
on-screen displays
and DVD menus.
Press this button to return to
or select the DVD “Play
Function Page”
ENTER – Press ENTER to
select an option or execute
a commend.
Note: Volume Control appears on all pages where it is required
LCD Touchpanel Control: Source Selection
– DVD or CD Playback
When you touch the “Back to DVD Play Controls”
button the “DVD/CD Play Function Page appears.
Note: Source is highlighted when selected by depressing touchpanel surface.
FWD Arrow –
Press to start or
resume playback
DVD/CD Play Function Page
STOP – Press
to stop disc
PAUSE --- Press to
pause playback; press
again to restart
Dual FWD Arrow --Use for forward
slow motion
playback, frame
advance and
forward scanning
Press to jump to the
next chapter or track
Dual REV Arrow --Use for reverse
slow motion
playback, frame
reverse and
reverse scanning
Dual REV Arrow --Press to jump to the
beginning of the current
chapter or track, then to
previous chapters and
tracks
LCD Touchpanel Control: Source Selection
– VCR Operation
When you touch the “VCR” button the
“VCR Functions” will appear.
Note: Source is highlighted when selected by depressing touchpanel surface.
PLAY: Starts playback
of ½” VHS video tape.
VCR Function Page
STOP – Press to stop
video cassette playback
CHANNEL: Provides
up/down selection of
CATV channels
PAUSE: Displays
“still image” during
video cassette
playback.
FAST FORWARD: While in PLAY, FFWD
provides high speed visual search. Depressed
after STOPPING tape provides high speed
forward advance of tape.
REWIND: While in PLAY, REW
provides high speed visual
search. Depressed after
STOPPING tape provides high
speed reversal of tape.
LCD Touchpanel Control: Source Selection
– Auxiliary Video Input
When you touch the “AUX” button the
following message will appear.
You will control your auxiliary video (i.e.
camcorder, DVD, VCR etc.) source manually
or with it’s own IR remote.
Note: Source is highlighted when selected by depressing touchpanel surface.
Auxiliary Video w/Left & Right Stereo
Audio Input
The AUX Video & Audio inputs are located in the
desk-mounted “Table Buddy” Input Plate.
LCD Touchpanel Control: Source Selection
– Laser Disc Playback
When you touch the “LD” (Laser Disc) button
the “Laser Disc Player Functions” will appear.
Note: Source is highlighted when selected by depressing touchpanel surface.
FWD Arrow –
Press to start or
resume playback
Laser Disc Player Function Page
STOP – Press
to stop disc
Dual REV Arrow --Press to jump to the
beginning of the current
chapter or track, then to
previous chapters and
tracks
Dual REV Arrow --Use for reverse
slow motion
playback, frame
reverse and
reverse scanning
PAUSE --- Press to
pause playback; press
again to restart
Dual FWD Arrow --Use for forward
slow motion
playback, frame
advance and
forward scanning
Press to jump to the
next chapter or track
LCD Touchpanel Control: Source Selection
--- Microphone Level Adjustment
When you touch the “MIC ADJ” button the
“Microphone Adjustment Page” will appear.
Note: Source is highlighted when selected by depressing touchpanel surface.
LCD Touchpanel Control: Source Selection
When you touch the “Return” button the the
“Previous Function Page” will appear.
Note: Source is highlighted when selected by depressing touchpanel surface.
LCD Touchpanel Control: Source Selection
– Computer Input #1
When you touch the “Computer 1” button the Laptop computer
input located at the desk-mounted “Cable Buddy” is selected
for display through the LCD projection system.
Note: Source is highlighted when selected by depressing touchpanel surface.
LCD Touchpanel Control: Source Selection
– Computer Input #2
When you touch the “Computer 2” button the computer input
located in the right-hand corner of the wall behind the
projection screen is selected for display through the LCD
projection system.
LCD Touchpanel Control: Source Selection
– Audio & Video Equipment
When you touch the “Audio& Video” button you will be returned
back to the Audio and Video Source Selection Page.
Note: Source is highlighted when selected by depressing touchpanel surface.
LCD Touchpanel Control: Source Selection
– System Options
When you touch the “System Options” button you will be
returned back to the Audio and Video Source Selection Page.
Note: Source is highlighted when selected by depressing touchpanel surface.
LCD Touchpanel Control: Source Selection
– System Help
When you touch the “System Help” button the
HELP page will appear.
Note: Source is highlighted when selected by depressing touchpanel surface.
Warranty & Maintenance
 Four Years on All Equipment
Consumable items
Consumable
items such
such as
asvideo
videocassette
cassetterecorder
recorderrecord/tape
record/tapeplayback
playbackheads,
heads,
lamps,
lamps,
andand
batteries, will
batteries,
will be
be warranted
warranted in
in accordance
accordancewith
withthe
theoriginal
originalmanufacturer's
manufacturer's
warranty
warranty
only.
only.
Devices
including,including,
Devices
but not limited
but not
to,limited
fuses and/or
to, fuses
power
and/or
and/or
power
lightning
and/ortransient
lightningprotectors/suppressors,
transient
which are designed to fail
protectors/suppressors,
which
in order
are designed
to protecttothe
failsystem
in orderequipment(s)
to protect the
are
system
not included in the
warranty.
equipment(s)
are not included in the warranty.
 Four Years on Labor
NOTE: Labor
(NOTE:
Laborto
tocorrect
correctwarranty
warrantyproblems
problemsis
isprovided
providedonly
onlyduring
duringnormal
normalworking
workinghours,
hours,
Monday through Friday, 8:30 a.m. - 5:00 p.m., excluding holidays.
holidays.)
 Manufacturer’s Warranty Coverage
Service Contact
Service Contact
 Local # 236-1345
 Local # 236-1345
 Toll Free Phone Support: (800) 736-9242
 Toll Free Phone Support: (800) 736-9242
 Ask for Service Dept. and refer to JOB#22315
 Ask for Service Dept. and refer to JOB#22315
THANK YOU
FOR THIS
OPPORTUNITY
TO BE OF
SERVICE!!