Tronzadoras MG, S.A.
P.I. Font de la Parera, s/nº
08430 – La Roca del Vallès
(Barcelona)
Tel. 93.842.41.60
www.tronzadorasmg.com
[email protected]
Quotation
GAA-350-90 CNC TR12 VERTICAL
*This image corresponds to the GAA-350-90 CNC TR12 VERTICAL
Technical Details:
Drilling /tapping unit D.12 and M10 with 3000 RPM and Y manual adjustment of 100mm
Motor 2,5HP
Blade dimensions Ø350 x 3,3 x 32 z.108 Negative angle
Feeder Ballscrew travel is 700mm
Air consumption is 20 litres / minute
3 x horizontal and 3 x vertical pneumatic clamping cylinders
Venturi Sprayer system ( optional Lubetools)
Omron CNC controller, servo motor and color touch screen panel installed
10 programs and 30 lines on each program for cuttting list and programming
20 parts can be stored in the library including length, Quantity and positioning of drills
Approximate dimensions of the machine 1,50 x 1,20 x 0.970 ( 390Kg)
Price of the machine according to specifications is 17.875,00 EUR/NET
Options,
Blade saw speed inverter, price is 442,00 Eur/net
Lubetools, price is 552,50 Eur/net
Ethernet connection+PC software, price is 1495,00 Eur/net
Air cleaning on working area, price is 175,00 Eur/net
Vacuum Start/Stop connection, price is 180,00 Eur/net
Exworks from La Roca del Valles – 08430 – Barcelona
Warranty: 12 months
Quotation validity: 3 months
Delivery time is 8-12 weks, to confirm on order
www.tronzadorasmg.com
Tronzadoras MG, S.A.
P.I. Font de la Parera, s/nº
08430 – La Roca del Vallès
(Barcelona)
Tel. 93.842.41.60
www.tronzadorasmg.com
[email protected]
Quotation
GAA-350-90 CNC TR12 VERTICAL
The machine is a CNC controlled machine (X axis) with one drilling unit TR12 ( T stands for
Drilling, and R stands for taping) operating individually.
The machine accepts a library of 20 pieces stored on memory and which can be selected to
create cutting list.
The standard quantity of drills are 10, however with an additional software the machine
accepts repeteable sequences of multiple drills,
www.tronzadorasmg.com
Tronzadoras MG, S.A.
P.I. Font de la Parera, s/nº
08430 – La Roca del Vallès
(Barcelona)
Tel. 93.842.41.60
www.tronzadorasmg.com
[email protected]
Samples:
Toolings and supports to the machine:
drill tool
Nylon Back supports for this profile.
The toolings needs to be installed and adjusted at the
beginning of the production of these pieces.
The TR12 units might also need to be adjusted manually.
Problem with part #1:
1.
www.tronzadorasmg.com
NO problems
Tronzadoras MG, S.A.
P.I. Font de la Parera, s/nº
08430 – La Roca del Vallès
(Barcelona)
Tel. 93.842.41.60
www.tronzadorasmg.com
[email protected]
Samples:
The three drills of this profile needs to be programmed in
the machine.
The quoted machine have already included an option to
select the depth to drill.
The vertical drilling head have installed three sensors
which have to be adjusted manually accordign to the drill
bit to be used.
The software will accept to define the sensor for every
hole.
By using a bidiametral drill bit of three Ø (maximum Ø
20), we might be able to define the depth according to
the drill bit and therefore produce the following piece:
The toolings needs to be installed and adjusted at the
beginning of the production of these pieces.
The TR12 units might also need to be adjusted manually.
Toolings and supports to the machine:
Problem with part #1:
1.
NO problems
drill toolings
Nylon Back supports for this profile.
The toolings needs to be installed at the beginning of the
production of these pieces.
The TR12 units might also need to be adjusted manually.
www.tronzadorasmg.com
Tronzadoras MG, S.A.
P.I. Font de la Parera, s/nº
08430 – La Roca del Vallès
(Barcelona)
Tel. 93.842.41.60
www.tronzadorasmg.com
[email protected]
Samples:
The three drills of this profile needs to be programmed in
the machine.
The quoted machine have already included an option to
select the depth to drill.
The vertical drilling head have installed three sensors
which have to be adjusted manually accordign to the drill
bit to be used.
The software will accept to define the sensor for every
hole.
By using a bidiametral drill bit of three Ø (maximum Ø
20), we might be able to define the depth according to
the drill bit and therefore produce the following piece:
The toolings needs to be installed and adjusted at the
beginning of the production of these pieces.
The TR12 units might also need to be adjusted manually.
Toolings and supports to the machine:
Problem with part #1:
1.
NO problems
drill toolings
Nylon Back supports for this profile.
The toolings needs to be installed at the beginning of the
production of these pieces.
The TR12 units might also need to be adjusted manually.
www.tronzadorasmg.com
Tronzadoras MG, S.A.
P.I. Font de la Parera, s/nº
08430 – La Roca del Vallès
(Barcelona)
Tel. 93.842.41.60
www.tronzadorasmg.com
[email protected]
Samples:
The three drills of this profile needs to be programmed in
the machine.
The quoted machine have already included an option to
select the depth to drill.
The vertical drilling head have installed three sensors
which have to be adjusted manually accordign to the drill
bit to be used.
The software will accept to define the sensor for every
hole.
By using a bidiametral drill bit of three Ø (maximum Ø
20), we might be able to define the depth according to
the drill bit and therefore produce the following piece:
The toolings needs to be installed and adjusted at the
beginning of the production of these pieces.
The TR12 units might also need to be adjusted manually.
Toolings and supports to the machine:
Problem with part #1:
1.
NO problems
drill toolings
Nylon Back supports for this profile.
The toolings needs to be installed at the beginning of the
production of these pieces.
The TR12 units might also need to be adjusted manually.
www.tronzadorasmg.com
Tronzadoras MG, S.A.
P.I. Font de la Parera, s/nº
08430 – La Roca del Vallès
(Barcelona)
Tel. 93.842.41.60
www.tronzadorasmg.com
[email protected]
Samples:
The three drills of this profile needs to be programmed in
the machine.
The quoted machine have already included an option to
select the depth to drill.
The vertical drilling head have installed three sensors
which have to be adjusted manually accordign to the drill
bit to be used.
The software will accept to define the sensor for every
hole.
By using a bidiametral drill bit of three Ø (maximum Ø
20), we might be able to define the depth according to
the drill bit and therefore produce the following piece:
The toolings needs to be installed and adjusted at the
beginning of the production of these pieces.
The TR12 units might also need to be adjusted manually.
Toolings and supports to the machine:
Problem with part #1:
1.
NO problems
drill toolings
Nylon Back supports for this profile.
The toolings needs to be installed at the beginning of the
production of these pieces.
The TR12 units might also need to be adjusted manually.
www.tronzadorasmg.com
Tronzadoras MG, S.A.
P.I. Font de la Parera, s/nº
08430 – La Roca del Vallès
(Barcelona)
Tel. 93.842.41.60
www.tronzadorasmg.com
[email protected]
Samples:
The three drills of this profile needs to be programmed in
the machine.
The quoted machine have already included an option to
select the depth to drill.
The vertical drilling head have installed three sensors
which have to be adjusted manually accordign to the drill
bit to be used.
The software will accept to define the sensor for every
hole.
By using a bidiametral drill bit of three Ø (maximum Ø
20), we might be able to define the depth according to
the drill bit and therefore produce the following piece:
The toolings needs to be installed and adjusted at the
beginning of the production of these pieces.
The TR12 units might also need to be adjusted manually.
Toolings and supports to the machine:
Problem with part #1:
1.
NO problems
drill toolings
Nylon Back supports for this profile.
The toolings needs to be installed at the beginning of the
production of these pieces.
The TR12 units might also need to be adjusted manually.
www.tronzadorasmg.com
Tronzadoras MG, S.A.
P.I. Font de la Parera, s/nº
08430 – La Roca del Vallès
(Barcelona)
Tel. 93.842.41.60
www.tronzadorasmg.com
[email protected]
Samples:
The three drills of this profile needs to be programmed in the
machine.
The quoted machine have already included an option to select
the depth to drill.
The vertical drilling head have installed three sensors which
have to be adjusted manually accordign to the drill bit to be
used.
The software will accept to define the sensor for every hole.
By using a bidiametral drill bit of three Ø (maximum Ø 20), we
might be able to define the depth according to the drill bit and
therefore produce the following piece:
The toolings needs to be installed and adjusted at the beginning
of the production of these pieces.
The TR12 units might also need to be adjusted manually.
Toolings and supports to the machine:
Problem with part #1: drill toolings
Nylon Back supports for this profile.
1.
NO problems
The toolings needs to be installed at the beginning of the
production of these pieces.
The TR12 units might also need to be adjusted manually.
www.tronzadorasmg.com
Tronzadoras MG, S.A.
P.I. Font de la Parera, s/nº
08430 – La Roca del Vallès
(Barcelona)
Tel. 93.842.41.60
www.tronzadorasmg.com
[email protected]
Samples:
The three drills of this profile needs to be programmed in
the machine.
The quoted machine have already included an option to
select the depth to drill.
The vertical drilling head have installed three sensors
which have to be adjusted manually accordign to the drill
bit to be used.
The software will accept to define the sensor for every
hole.
By using a bidiametral drill bit of three Ø (maximum Ø
20), we might be able to define the depth according to
the drill bit and therefore produce the following piece:
The toolings needs to be installed and adjusted at the
beginning of the production of these pieces.
The TR12 units might also need to be adjusted manually.
Toolings and supports to the machine:
Problem with part #1:
1.
NO problems
drill toolings
Nylon Back supports for this profile.
The toolings needs to be installed at the beginning of the
production of these pieces.
The TR12 units might also need to be adjusted manually.
www.tronzadorasmg.com