Assembly Tips and Tricks
Remove parts from the frame by rotating them back and forth until they break
free. Trim off any excess wood with a hobby knife.
Gently tap pieces together with a mallet, hammer or other blunt object.
Box Organizer
compatible with
Loose pieces may be assembled with a small amount of glue. We recommend
using glue for any removable trays or parts that are handled frequently.
Pathfinder Adventure Card Game
Tight pieces can be sanded or trimmed with a hobby knife to create a better fit.
See more assembly tips and product videos on our website at
www.thebrokentoken.com or contact us via email at
[email protected].
PACG-BO1
www.thebrokentoken.com
Twitter: @tbt_gaming
Facebook: thebrokentoken
Instagram: thebrokentoken
This box organizer is compatible with the Pathfinder Adventure
Card Game and its expansions. This is a non-licensed product and all
trademarks and copyrights are properties of their respective owners.
Visit your local gaming store or thebrokentoken.com for
our full line of gaming organizers and accessories.
0
19372
41716
3
Assembly Instructions
Note that parts D, E, F and G have letters
engraved near certain slots to mark
recommended placement of dividers.
1. Attach part B to part A. Be sure to attach B
on the correct side of part A. There are two slots
available for use depending on how deep you’d
like the dice tray. See Figure 1.
B
A
C
D
E
F
G
H
I
J
K
2. Attach parts E, F and G by sliding their inner slots into the
slots on part A. The order of E, F and G is important because of the “R” markings that indicate
divider placement. See Figure 2.
B
A
3. Attach part C to the front slots of pieces E, F and G. Be sure the orientation of the end tabs
on part C are correct. See Figure 3.
Figure 1
4. Attach ends D and I as shown in Figure 4. If the slots are snug it is sometimes easier to turn
the organizer on its side and tap them in with a soft mallet.
5. Attach the front and back parts J and K as shown in Figure 5. Next attach
side H. If the corners are loose you can use a small strip of tape on the outside
corner to hold it together (shown in blue).
Your organizer is now assembled and ready to be placed into the box. The adjustable
dividers can be placed in the recommended slots marked with an “R” or any slots that
work best for you. See diagram below for our recommended divider and card placement.
Figure 2
Thank you for purchasing our Broken Token box organizer. Please don’t
hesitate to contact us if you have any problems or questions concerning this product.
G
E
F
Figure 3
More gaming accessories available at www.thebrokentoken.com.
Recommended Layout to Accommodate
Base Game and All Expansions
C
D
I
Figure 4
J
H
Figure 5
K