The TV Ears Power Stacker increases the infrared output. You will need the power stacker and the power
stacker cord to connect it to your transmitter.
Instructions:
1. Place the Power Stacker underneath your
Transmitter, with the diodes facing towards the
seating area. Do not disconnect any of the cables
from the back of the transmitter.
Transmitter
Power Stacker
AC Adapter into
12V port of
power stacker.
2. The AC Adapter should have two plugs on one end
(if purchased in a Professional system). Plug one into
the 12v port on the back of the power stacker. The
other plug should be plugged into the 12V port of the
transmitter. Plug the opposite end into a wall power
outlet or surge protector.
Note: Your power stacker may have come with an AC
adapter with only one plug if purchased separately.
Infrared
Lights
Check: If connected correctly the diodes on both the
transmitter and power stacker will glow red (cup your
hands around them to check).
3. Plug the red end of the Power Stacker Cord into
the back of the transmitter into the Ext port. Plug
the black end of the power stacker cord into the
power stacker into the Ext port.
Red end into the
transmitter.
Audio Cord
plugged into
the transmitter.
TV Ears Canada
1221 Barton St.
Stoney Creek On.L8E 5G9
Phone: (800) 236-4864 Fax: (905) 643-0001
www.tvears.ca
Black end into the
power stacker.
If you need further assistance,
please contact the place of purchase.
© 2010 TV Ears, Inc. All rights reserved.