APPEARANCES
ELECTRONIC CHEQUE WRITER
CW1600
OPERATION MANUAL
1.
2.
3.
4.
5.
6.
7.
Display
Keyboard
Paper Holding lever
Ink Pad Cover
Starting Position Mark
Printing Position Mark
Printing window guide
DESCRIPTION OF OPERATION KEY
P
When a cheque is ready to be issued, and the Paper holding Lever has been set to the down position,
pressing this key will start the printing.
→ To delete the last figure on the display.
C
Pressing the key will clear the current display
M/C When this key is pressed, the “Total Amount” and “Total Sheets” will be shown on the display.
Press once: To display the “Total Amount printed”
Press again: To display the “Total sheets printed” on the left side of the display, decimal of the “Total
Amount Printed” on the right side.
Note: If the “Total Amount” exceeds 14 digits, the error message “E” will be displayed.
CL Press this key to delete the “Total Amount” and “Total Sheets” stored in the memory.
000 Press this key to input “000”.
DESCRIPTION OF DISPLAY
M Shows the memory of “Total amount” and “Total Sheets”. It will stay on until the CL key is pressed.
━ Indicates that the result of the calculation is a negative one.
 Indicates that the Paper Holding Lever has been set down to the correct position.
1.
2.
3.
4.
Adjust the Depth Bar to guide the cheque to the printing position.
Insert a cheque and align the “Printing Window Guide” and set down the Paper Holding Lever and
make sure the “” mark is displayed.
Note: If no window guide in the cheque, please directly align to the start position mark and printing
position mark, and then set down the Paper Holding Lever.
Input the amount.
Check the amount on the display and press the “P” key to start the printing.
Note:
CAUTION
1.
2.
3.
The machine will sound off if you:
Try to issue a cheque while the negative result or “0” is displayed.
Try to issue a cheque when the Paper Holding Lever is at the “up” position.
If the calculation result exceeds 14 digits, error message “E” will be displayed.
START THE CHEQUE WRITER
This new model machine is designed with the following new features: 14 digits display, Auto memory for
currency symbol, print mode and password.
1. Turn the power switch on.
2. Input the password if the Password Function is enabled.
3. When “0” is shown on the display, the machine is ready to use
ISSUING A CHEQUE

The currency symbol, comma, decimal point and the end mark are automatically printed.

Alarm for errors. If the printout amount is not the same as the display, the machine will sound and
alarm and an error message “E” will be display. Press the C key will clear the error message.
PASSWORD FUNCTION
When this function is enabled, the password would be required every time the cheque writer is powered
on. If a wrong password is input, the cheque writer will not respond. Reset the cheque writer again and
input the correct password.

1.
2.
Enable The Password Function
Keep the “=” Key pressed and then press the Key “3”
Input a password (four digits required except “0000”) when the message “Pd-Add” is displayed.
Once the password is enabled, the message “Pd-old” will be displayed, and the correct password
must be input every time the cheque writer is powered on.

1.
2.
3.
To Cancel the Password Function
Keep the “=” Key pressed and then press the Key “3”
Input the old password (four keys required) when the message “Pd-old” is displayed.
Input four Keys of “0”.

1.
2.
3.
To Change the Password
Keep the “=” Key pressed and then press the Key “3”
Input the old password (four keys required) when the message “Pd-old” is displayed.
Input a new password (four keys required) when the “Pd-Add” is displayed.
SET A DEFAULT END MARK
Two end marks are available, keep the C key pressed and then press the point key to select the end mark.
SET A DEFAULT CURRENCY SYMBOL
SPECIFICATIONS
Using the keypad, the desired currency symbol can be selected and memorized automatically. The total
available currency symbols and the relative code are listed in the following table.
Power Source:
AC110V or 220V, 50/60 Hz
Power consumption:
3.5W (20W when printing)
Dimensions:
245 X 185 X 105 mm
Net weight:
2.2 Kg
Keep the C key pressed and then press the desired currency symbol code. The cheque writer will display
the currency code you input. For example, keep C key pressed and input “10”, the cheque writer will
display “Code_10”, and the relative currency symbol is set as default.
CODE
Currency symbol
CODE
Currency symbol
Code-0
BND
Code-8
AUD
Code-1
HKD
Code-9
THB
Code-2
USD
Code-10
BDT
Code-3
GBP
Code-11
RP
Code-4
EUR
Code-12
RM DAN SEN
Code-5
VND
Code-13
RM
Code-6
JPY
Code-14
RM DAN00SEN
Code-7
INR
Code-15
SGD
INSTALLING THE INK PAD
When printing color becomes light, replace the Ink Pad as follows:
1. Turn off the power.
2. Remove the Ink Pad Cover and take out the Ink Pad as shown.
3. Replace new Ink pad.
4. Make sure the ink pad is secured.
5. Put the Ink Pad Cover back.