RIYA Multibus card
The future in laser control systems
ILDA
connector
DMX
in/out
ADC
for music
input
128 Mb
Flash
memory
TTL I/O
16 inputs
16 outputs
SmartMedia
connector
outputs (2x16
lines);16
lines);
PCI bus
USB input
32 MB on board flash memory for 1024 frames.
32 laser, 32 DMX on board programs.
32 programmable on board effects
IRDA receiver
USB I/O
Display a laser light show, run laser and DMX programs:
In Real time from the PC (PCI slot or USB buss)
In Stand Alone mode from the built-in 32 MB Flash memory, SmartMedia Card, or USB Flash-Disk
Control the Multibus card from:
PC (using the PCI bus or USB port)
www.riyalasers.com
DMX input
A standard PC keyboard or specialized console
[email protected]
IRDA remote
RIYA shares the complete interface of our cards with software companies
We invite software developers to use our high performance card with their systems
RIYA Co Ltd
7 Uhorska Str., Apt. 18 79034 Lviv Ukraine, tel/fax +38 (0322) 705619
RIYA DMX Pro card
• Standard PCI card
• Control up to three output and one input channel.
• Card parameters are programmable.
• Music input(1 volt) triggers special effects.
• Up to 4 cards may be installed in one PC.
Windows98/Millenium/NT/2000/XP drivers and SDK
are included.
www.riyalasers.com
[email protected]
RIYA PCI Pro card
• Standard PCI card
•Standard ILDA output connector
• Up to 200,000 points per second output
• 12 bit X, Y, Z outputs
• 8 bit RED, GREEN, BLUE, DEEP BLUE, YELLOW, CYAN
• 8 bit INTENSITY DAC
• 8 bit SHUTTER DAC
• isolated DMX outputs (2ch), DMX input (1ch)
• 16 TTL outputs, 16 TTL input lines
• Amplitude music modulation
• Separate X/Y position music modulation
• Each card controls one scan system
• Up to 4 cards may be installed in one PC.
Windows98/Millenium/NT/2000/XP drivers and SDK
are included.