Product Specification Emer-Proof 695 Water based, modified polyurethane, flexible waterproofing membrane for wet areas *1.0 Waterproofing 1.1 (Nominate area(s) for waterproofing) 1.11 Where so designated on the drawings, surfaces shall be waterproofed with a liquid, water based, modified polyurethane, flexible membrane. 1.12 General All surfaces shall be prepared, primed and the membrane applied strictly in accordance with the current manufacturer technical data sheet. All work shall be carried out by a pre-qualified contractor, who is well trained in the application of the specific, documented, membrane system. All materials used in conjunction with the new membrane system, shall be approved by the membrane manufacturer. 1.13 Surface Preparation All surfaces to which the new membrane is to be applied, shall be smooth, clean, dry, and free from irregularities. All substrate cracks and surface imperfections are to be filled, sealed and dry prior to membrane application. Parchem Construction Supplies Document Date: 09/2009 Page 1 of 2 Parchem offers direct assistance with specifications for individual projects; we can visit the site, design office, or arrange a meeting at our branch office. It is recommended that Parchem be consulted early in the design process. For Technical Data Sheets (TDS), Specifications and Method Statements, please visit our website at www.parchem.com.au. * To insert the Specification, Copy and Paste. Product Specification 2.00 Waterproofing Membrane 2.10 All wall to wall and floor to wall junctions, are to incorporate an elastic, preformed corner and wall joint band into the membrane system to accommodate any movement at these junctions. The waterproofing membrane is to be odour and solvent-free, fibre reinforced, and shall exhibit the following properties: Australian Standard compliable: Elongation: Dry film thickness (DFT): VOC Level: Density: Drying time: Re-coat time: Full cure: AS4858:2004 (Class 111 membrane) > 300% 750 – 1000 microns < 25g / Lt. 1.25 +/- 0.05 12 hours approx @ 200C 4 - 6 hours @ 20oC 3 days @ 20oC 2.11 Emer-Proof 695 and Emer-Proof Expansion Joint Band from Parchem Construction Supplies meets the performance criteria and is an approved product. Parchem Construction Supplies Document Date: 09/2009 Page 2 of 2 Parchem offers direct assistance with specifications for individual projects; we can visit the site, design office, or arrange a meeting at our branch office. It is recommended that Parchem be consulted early in the design process. For Technical Data Sheets (TDS), Specifications and Method Statements, please visit our website at www.parchem.com.au. * To insert the Specification, Copy and Paste.
© Copyright 2024 Paperzz