Huawei
Y210 PHONE
CDM MEDTRONICS 2014
About Huawei Y210
CDM MEDTRONICS 2014
Front view
Speaker
Display
screen
Volume
Settings
Camera
Back button
menu
Home button
CDM MEDTRONICS 2014
Backview
Camera
Speaker
CDM MEDTRONICS 2014
Side view
Charging
port
Volume
button
CDM MEDTRONICS 2014
Using the phone
 Powering On Your Mobile Phone
 Press the power button and hold . The first time you power on
your phone, you will be asked to sign in to your account and set
up your mobile phone
 Powering Off Your Mobile Phone
 Press power button and hold to open the Phone options menu.
 Touch Power off.
 Restarting Your Mobile Phone
 Press and hold to open the Phone options menu.
 Touch Restart.
 Touch OK
CDM MEDTRONICS 2014
Power key
CDM MEDTRONICS 2014
Phone at a Glance.
Earpiece
Headset jack
Power key
Charger/
port
Camera
Volume key
Back
Home
Menu
Speaker
CDM MEDTRONICS 2014
Data
• Press and hold to power on your mobile phone.
• Press and hold to open the Phone options menu.
• Press to lock the screen when your mobile phone is active.
• Touch to return to the previous screen or exit the application you
are running.
• Touch to hide the keyboard.
Touch to open the menu on an active screen.
• Touch to return to the Home screen.
• Touch and hold to show the most recently used
CDM MEDTRONICS 2014
applications.
It involves two steps as shown below.
1.
2.
1. Remove the battery cover.
2. Insert the SIM card.
CDM MEDTRONICS 2014
1. Remove the battery cover.
2. Insert the micro-SD card into the card slot as shown in the diagram.
CDM MEDTRONICS 2014
b
a
1.) Angle the edge labeled a (with the contacts) into the bottom end of the
battery compartment.
2.) Push the edge labeled b into the compartment until the battery clicks
firmly into place.
CDM MEDTRONICS 2014
Before charging the battery, ensure that it has been properly installed
on your phone.
Charger
CDM MEDTRONICS 2014
1.) Connect the USB cable that came with your mobile phone to the
charger.
2) Connect the other end of the USB cable to your mobile phone.
Then, to start charging, plug the charger into an electrical outlet.

If you charge your mobile phone while it is powered on, the
battery
icon on the notification bar indicates the charging status. When the
Phone is fully charged the status button will change to green
CDM MEDTRONICS 2014
The color of the status indicator tells you the status of your phone’s battery.
Green: Fully charged
(when connected to
charger).
Orange: Charging in
progress (when
connected to charger).
Red: Battery low
Status Indicator
CDM MEDTRONICS 2014





When you do not need 3G services, set your phone to connect to
a 2G network.
When your mobile phone is not in use, turn off the screen
backlight.
Reduce the time it takes for your screen backlight to turn off
when your phone is idle.
Lower the screen brightness.
Turn off Bluetooth when you are not using it. Only make your
phone visible to other
CDM MEDTRONICS 2014
 Bluetooth devices when you need to establish
a Bluetooth connection.
 Turn off Wi-Fi when you are not using it.
 Turn off your phone’s GPS receiver when you
are not using it.
 Lower the volume.
 Close power-draining programs, when you do
not need them.
 Turn off the data service when not required
CDM MEDTRONICS 2014
 Always remember to carry your charger
 Unplug the charger from the electrical plug
and the device when not in use.
 Use the AC power supply defined in the
specifications of the charger. An improper
power voltage may cause a fire or a
malfunction of the charger
CDM MEDTRONICS 2014
Do not connect two poles of the battery with conductors, such
as metal materials, keys, or jewelries. Otherwise, the battery
may be short-circuited and may cause injuries and burns on
your body.
 Do not leave your device, battery, and charger in a place with
an extreme high or low temperature. Otherwise, they may not
function properly and may lead to a fire or an explosion. When
the temperature is lower than 0°C, performance of the battery
is affected
 Do not modify or remanufacture, attempt to insert foreign
objects into the battery, immerse or expose to water or other
liquids, expose to fire, explosion or other hazard.
 Avoid dropping the device or battery. If the device or battery is
dropped, especially on a hard surface, and the user suspects
damage, take it to a qualified service center for inspection

CDM MEDTRONICS 2014
 The device, battery, and charger are not water-
resistant. Keep them dry. Protect the device,
battery, and charger from water or vapor.
Otherwise, it may lead to a short circuit, a
malfunction of the device, and an electric shock
to the user
 If the device screen is broken by colliding with
hard objects, stop using the device immediately,
and then contact your system administrator.
 The device should only be connected to products
that bear the USB-IF logo
CDM MEDTRONICS 2014
Do not touch the device or the charger with a wet hand.
Do not place your device, battery, and charger in places
where they can get damaged because of collision.
Otherwise, it may lead to battery leakage, device
malfunction, overheating, fire, or explosion.
 Do not place magnetic storage media such as magnetic
cards and floppy disks near the device. Radiation from the
device may erase the information stored on them.
 Do not leave your device, battery, and charger in a place
with an extreme high or low temperature. Otherwise, they
may not function properly and may lead to a fire or an
explosion. When the temperature is lower than 0°C,
performance of the battery is affected


CDM MEDTRONICS 2014
Touchscreen Actions
Using your finger on the touchscreen, you can operate your phone conveniently.
Touch & hold
Touch
Flick
CDM MEDTRONICS 20144
Double touch
Drag

Flick or swipe from the top part to bottom of
the screen to open the notification bar
Select data Switch by touching the two bars

To turn to orange and blue bar below it

CDM MEDTRONICS 2014
When you are not using your data service, to
eliminate unwanted data traffic, you can turn
it off quickly.
1. Open the notification bar.
2. Touch at the top of the screen to switch data
services on or off.

CDM MEDTRONICS 2014





MY NAME IS Derek Luve
BORN 13/10/1979
Attained 80%
Has 80/80
3 # m! in)( 25kg 6*7.5
CDM MEDTRONICS 2014
Displaying the Keyboard
 To enter text, use the onscreen keyboard. Some
applications open the keyboard automatically. In
others, touch a text field to open the keyboard.
 Touch the back key to hide the keyboard.
 Touch and hold a text field to open the Edit
text menu
a
4
3
1
q w2
e
s
d
z
x
?123
5
r
t
f
c
8
7
6
y
u
g
h
v
b
i
j
k
n
0
p
l
m
:-)
.
...
9
o
...
...
Touch to delete a
character to the left of the
cursor. Touch and hold to
delete all characters to
the left of the cursor.
Touch to insert a space.
Touch to change from the text
mode
Touch once to capitalize the next letter you type.
Touch twice to capitalize all letters to be entered