6300 - 4 ” LED.LU X

4” LUX WHITE LED CYLINDER WITH DOWNLIGHT
TYPE :
PROJECT:
ORDER NUMBER:
LEDs
Finish
Voltage
Options
Downlight
6307
6308
6309
W30
W35
W40
S–Silver
W–White
1–120V
2–277V
BDIM-W1
BDIM-W2
B4MR16
Example:
6309
W40
S
2
BDIM-W2
B6MR16
Other Options:
☐
☐
RD–remote driver
BLA/RD–remote driver
with ball aligner
☐ BLA–pipe mount
☐ XP–extra pendant length
(inches):
CONSTRUCTION
• Matte white acrylic diffuser provides even
illumination.
• cUL listed for dry locations only.
CANOPY
• W–white or S–silver, with matching cord.
• Standard mount is 6 ft. adjustable power cord.
Order XP for extra pendant length.
• Hard stem also available. Order BLA .
LED DRIVERS
•Order BDIM–W for dimming, RD for remote in
accessible ceilings or panels.
• Emergency not available. If EM is required,
recommend use of inverter (by others).
• Standard and dimming drivers mounted inside
3” diameter, 12” long tube housing at ceiling.
Mounts to all standard J-boxes.
ModelLengthWattsLumens
6307
2 ft.
54
2988
6308 3 ft.
80.5
4483
6309
4 ft. 107.385976
*Ht.
Specify LED color:
W30–White (3000º K)
W35–White (3500º K)
W40–White (4000º K)
Driver canopy dimensions:
Configuration*Ht.
Standard
MR16
12.0”
16.3”
6300 - 4” LED.LUX
Model#
LEDs
28.4”/40.2”/52”
BURBANK,
CALIFORNIA,
OPTIONAL DOWNLIGHT
•Order B4MR16.
91505
• 9W max.
• Uses LED MR16, DC 12V, GU5.3 lamps
(by others).
•Downlight does not dim.
W W W.
DELRAY
LIGHTING.
4”
COM
JUL 2016
• Nichia Corp. NFSL757 linear board chips, available in
white color temperatures of W30 (3000º K),
W35 (3500º K), and W40 (4000º K); matching the
traditional CCT of existing incandescent, fluorescent,
and metal halide lamps.
• CRI: 90.0
•R9 ≥ 50.0
LED
MR16
6309.W35 - 4 ft.
6300 - 4” LED, LUX
B4MR16 –4” downlight. 9W max.
Delray’s Lux fixtures are second-generation LED luminaires that provide
conventional footcandle levels at less than or equal to 1.4W/FT2.
Lux provides the best lumen/watt ratio per fixture, as well as precise color
temperature matching for multiple fixtures. Standard options include dimming,
for scene control and energy management.
cUL rated for dry locations only.
L M - 7 9 T E S T S U M M A R Y - 6 319. 3 5
90∞
1
2751
5502
524
180°
150°
11005
393
120°
262
90°
0
131
262
60°
393
Vertical plane thru Horiz. 0 – 180°
Horiz. cone thru Vert. angle 85°
% CEILING 80 (20% FLOOR)
% WALL 70
50
30
107
93
83
75
68
62
56
52
48
45
42
107
87
73
63
55
48
43
38
35
31
29
NOTES
6309.W35 - 4 ft.
3500º K white LED
Total lumens: 5,977
CRI: 90.0
R9 ≥ 50.0
107
81
65
54
45
39
34
29
26
23
21
5976.77
Input Voltage (VAC/60Hz):
120.00
Input Current (Amp):
0.90
Input Power (W):
107.38
Input Power Factor:
0.9973
Efficacy:
55.66
Color Rendering Index (CRI):
90.0
Correlated Color Temperature (K ):
3990
DIMMING DRIVERS
BDIM-W1
• 0–10V dimming to 10%.
•Utilizes 100W/24V, 0–10V
120/277 constant voltage driver.
• Use with 0–10V, purple/gray wire
analog dimmers; with low end
trim pot, and adjust low end
to above flicker threshold.
BDIM-W2
30°
COEFFICIENTS
0
1
2
3
4
5
6
7
8
9
10
30∞
• For white LEDs only.
131
524
50∞
8254
Total Lumens:
• 0–10V dimming to 1%.
• System utilizes 100W/24V,
120/277 constant voltage driver,
with the Eldo LIN211D1-LN
module.
• Required for use with digital
architecture/networking
systems like Acuity nLight,
Eaton Greengate, and similar
management systems.
MOUNTING OPTIONS
PIPE MOUNT
REMOTE DRIVER
Order BLA mount for 3/8” IPS pipe.
Length must be specified.
Includes ball aligner canopy rated
for 75 lbs. and mounts to standard
J-boxes. Not for windy locations.
Pipe longer than 8 ft. will be shipped
in two pieces—one 8 ft. section plus
a second section for the balance—
supplied with a painted, threaded
pipe coupler, with set screws.
Ball aligner. Order BLA.
Install driver enclosure (supplied)
maximum 18 ft. from fixture;
must remain accessible.
Order RD.
000000000000
000
0000000000000
0000000000000
2” x 2” x 23.5”
000000000000
000
2” x 2” x 23.5”
With ball aligner,
order BLA/RB.
NOTE: Multiple drivers must be
mounted no less than 4 inches
apart side-by-side, and 1 inch
apart end-to-end, to avoid
overheating.
ACRYLIC DIFFUSER CLEANING
Warning: Do not clean with
ammonia based cleaners
(e.g. Windex®). Use only water
or cleaners specifically
formulated for cleaning plastics.
Max. Wiring Distance (at full load)
Wire Size (AWG)
Distance (ft.)
18
16
14
12
10
18
29
46
71
120
JUL 2016
CP DISTRIBUTION
Philips Advance
00
2
Driver:
00
M R 16 C P D I S T R I B U T I O N
6300 SLIM TUBES – LED CANOPY DIMENSIONS
PENDANT STANDARD
With Downlight
5.5
With Downlight
5.1
PENDANT WITH DMX
No Downlight
5.1
15.7
14.3
12.8
5.5
No Downlight
19
No Downlight
PIPE MOUNT WITH SWIVEL CANOPY
RD – REMOTE DRIVER OPTION
With Downlight
5.5
Pendant
5.5
Pipe Mount
4.375
5.1
21.8
23.62
3.4
3.9
1.9
20.33
2
0.25
Remote Driver Housing
Adjustable bar hanger brackets are removable.
2