UMLP10L 1.4x1.8, Packing Drawing
Packing Description:
UMLP10L 1.4x1.8 products are classified under Moisture Sensitive Level 1.
The carrier tape is made from dissipative polystyrene or polycarbonate resin. The cover tape is a multilayer film primarily
composed of polyester film, adhesive layer, heat activated sealant, and anti-static sprayed agent. These reeled parts in standard
option are shipped with 5000 units per 178 mm diameter reel. Up to three reels are packed in each intermediate box. The reels is
made of polystyrene plastic (anti-static coated or intrinsic).
These full reels are individually barcode labeled and placed inside a pizza box made of recyclable corrugated brown paper with a
Fairchild logo printing. Up to 3 reels could be packed in the pizza box. And these pizza boxes are placed inside a barcode labeled
shipping box which comes in different sizes depending on the number of parts shipped.
ESD Logo Label
F63TNR Label
•
• JT •
•
• JT •
•
• JT •
10
9
8
4
5
7
1
6
2
3
Pin 1
Barcode
Label
Sealed with antistatic
adhesive tape.
Wrap the reels
in bubble pack
Pizza Box printed with FSC Logo
and caution statements.
Dimension: 190mm x 196mm x 45mm
ESD Logo Label sample
F63TNR Label sample
LOT:
PMH010088888
QTY:
FSID: FSA2259UMX
Electrostatic
Sensitive Devices
Require Proper
Handling Procedures
Reel No.:
D/C1: P1215NA QTY1:
SPEC:
SPEC REV:
Green Component
D/C2:
QTY2:
5000
RoHS
COMPLIANT
2nd Level Interconnect
1. Category G3
2. Maximum safe temperature 260 deg C
3. MSL 1
FAIRCHILD SEMICONDUCTOR
Tape Leader and Trailer Configuration
Carrier Tape
Cover Tape
Trailer Tape 300mm minimum
Components
Leader Tape 500mm minimum
(F63TNR)6.0
Embossed Tape Dimension
Po
T
P2
D
+
+
E
+
F
Ko
W
Wc
Bo
Tc
D1
P1
Ao
User Direction of Feed
Dimensions are in millimeters
Package
Ao
Bo
+/-0.05 +/-0.05
UMLP10A
1.59
D
+/-0.10
D1
min.
E
+/-0.1
1.5
0.6
1.75
2.09
F
Ko
P1
+/-0.1 +/-0.05 TYP
3.5
0.72
4
Po
TYP
P2
+/-0/05
T
TYP
4
2.0
0.20
Tc
W
+/-0.005 +/-0.3
0.048
Wc
TYP
8
5.4
Notes: Ao, Bo, and Ko dimensions are determined with respect to the EIA /Jedec RS-481 rotational and lateral movement
requirements (see sketches A, B, and C).
0.5 mm
maximum
200 maximum
Typical component
cavity center line
Bo
20 deg maximum component rotation
Sketch A (Side or Front Sectional View)
Component Rotation
Shipping Reel Dimension
0.5 mm
maximum
Typical component
center line
Sketch C (Top View)
Component lateral movement
Ao
Sketch B (Top View)
Component Rotation
W2 max Measured at Hub
W1 Measured at Hub
B Min
Dia C
Dia A
max
Dia D
min
Dia N
DETAIL AA
See detail AA
W3
Dimensions are in millimeters
Tape Width
8
Dia A
max
Dim B
min
Dia C
+.5/-.2
Dia D
min
Dim N
min
180
1.5
13
20.2
60
Dim W1
+2/-0
8.4
FM Chen
Dim W2
max
Dim W3
(LSL - USL)
14.4
9-Jul-2013
7.9~10.9
UMLP10L 1.4x1.8
Packing Configuration
1:1
PKG – UMLP10A