Series 65
BALL VALVES
414
BRASS BALL VALVES
FEATURES AND BENEFITS
• Industrial two-piece forged-brass ball valves
• Precision machined for maximum strength, durability
and maintenance- free operation
TECH TIP
90% of air leakage is generated at the production
area. In order to minimize the negative impact
of these leaks, it is strongly recommended to
install ball valves or even better « Air-Saver »
to isolate the air distribution network from
the compressor.
Female / Female
• Full flow design
• Chrome plated brass ball and nickel plated brass S
65
body for long life and extra corrosion resistance
APPLICATIONS
Designed to handle compressed air and water
Body: Nickel plated brass
Ball: Hard chrome plated brass
Stem Seal: Brass
Ball Seal: PTFE
Handle: Zinc plated and varnished steel
Joints: NBR and Viton®
Product
No
65.725
65.738
65.750
65.775
65.800
65.825
65.850
65.900
Maximum
Working
Pressure
725 PSI
725 PSI
725 PSI
580 PSI
580 PSI
435 PSI
435 PSI
362 PSI
Thread
(F) NPT
1/4
3/8
1/2
3/4
1
1-1/4
1-1/2
2
Weight
kg
0.18
0.15
0.19
0.32
0.46
0.70
1.03
1.66
SPECIFICATIONS
kg
ball valves
MATERIALS
Working Temperature Range: -20 °C to 150 °C
Female / Female
safety
LOCKOUT
SOLUTION
LOCKOUT
Designed to handle compressed air and water
MATERIALS
Product
No
65.930
65.932
65.934
65.936
65.938
Maximum
Working
Pressure
725 PSI
725 PSI
725 PSI
580 PSI
580 PSI
Thread
(F) NPT
1/4
3/8
1/2
3/4
1
Weight
kg
0.22
0.19
0.23
0.37
0.51
kg
Body: Nickel plated brass
Ball: Hard chrome plated brass
Stem Seal: Brass
Ball Seal: PTFE
Handle: Zinc plated and varnished steel
Joints: NBR and Viton®
SPECIFICATIONS
TOPRING
APPLICATIONS
Working Temperature Range: -20 °C to 150 °C
415
S
65
Female / Female
(BSPP)
ball valves
MATERIALS
Body: Nickel plated brass
Ball: Hard chrome plated brass
Stem Seal: Brass
Ball Seal: PTFE
Handle: Zinc plated and varnished steel
Joints: NBR and Viton®
SPECIFICATIONS
Product
No
65.738M
65.750M
65.775M
65.800M
65.825M
65.850M
65.900M
Maximum
Working
Pressure
725 PSI
725 PSI
580 PSI
580 PSI
435 PSI
435 PSI
362 PSI
Thread
(F) BSPP
3/8
1/2
3/4
1
1-1/4
1-1/2
2
Thread
(F) NPT
1/4
3/8
1/2
3/4
1
Thread
(M) NPT
1/4
3/8
1/2
3/4
1
Weight
kg
0.15
0.19
0.32
0.46
0.70
1.03
1.66
kg
Working Temperature Range: -20 °C to 150 °C
Male / Female
TOPRING
MATERIALS
416
Body: Brass
Ball: Hard chrome plated brass
Stem and Ball Seal: PTFE
Handle: Steel with vinyl
SPECIFICATIONS
Maximum Working Pressure: 600 PSI
Maximum Working Temperature: 120 °C
Product
No
65.700
65.705
65.710
65.715
65.720
Weight
kg
0.26
0.26
0.34
0.39
0.63
kg
STAINLESS STEEL
BALL VALVEs
safety
SOLUTION
LOCK-out
S
FEATURES AND BENEFITS
• Two-piece body construction
• Full flow design
• Locking handle
65
LOCKOUT
APPLICATIONS
Ideal for corrosive environments, compressed air, water, oil and gas
MATERIALS
Body: 316 Stainless steel
Ball: 316 Stainless steel
Ball Seal and Stem Seal: PTFE
Handle and Nut: 304 Stainless steel with vinyl
SPECIFICATIONS
Thread
(F) NPT
1/4
3/8
1/2
3/4
1
Weight
kg
0.23
0.27
0.36
0.64
1.00
Maximum Pressure Rating: 1000 PSI
Maximum Working Temperature: -51 °C to 232 °C
kg
SLIDE VALVES
ball valves
Product
No
65.225
65.238
65.250
65.275
65.300
FEATURES AND BENEFITS
• 2-position, 3-way, manually-operated
slide valves provide simple on/off air-flow
control
• Downstream air exhausts when slide valve
is closed
APPLICATIONS
Ideal low-cost method for operating single-action air cylinders,
air clamps, air gauges, and similar air-actuated devices
IN
OUT
MATERIALS
SPECIFICATIONS
Maximum Working Pressure:140 PSI
Maximum Working Temperature: 5 °C to 60 °C
Product
No
65.600
65.605
65.615
65.625
65.635
65.645
Thread
(F) NPT
1/8
1/4
3/8
1/2
3/4
1
* Inlet 100 PSI, 10 PSI pressure drop
Thread
(M) NPT
1/8
1/4
3/8
1/2
3/4
1
Flow SCFM*
41
74
99
102
226
312
OPERATING INSTRUCTIONS
By moving the sleeve in one Air in
direction, the air is free to pass through the slide valve to the circuit
By sliding the sleeve in the
opposite direction, the air supply is shut off and the Air in
downstream air is allowed
to exhaust, thus rendering the tool or machine inoperative.
Out
Exhaust
TOPRING
Aluminium
Exhaust
417
S
65
BRASS
MINI BALL VALVES
FEATURES AND BENEFITS
• PTFE ball seals for a positive seal in both directions,
making installation easier
• Compact corrosion-resistant Nylon handle
• Compact format
• No maintenance required
Product
No
65.118
65.125
65.138
65.150
Thread
(F) NPT
1/8
1/4
3/8
1/2
APPLICATIONS
Designed to handle compressed air and water, as well as
certain gas and liquid applications, where the valve material
is appropriate
MATERIALS
ball valves
Product
No
65.119
65.126
65.139
65.151
TOPFIT®
POLYMER
miniature BALL VALVEs
Thread
(M-F) NPT
1/8
1/4
3/8
1/2
WITH PUSH-TO-CONNECT FITTINGS
Body: Nickel plated brass
Ball: Chrome plated brass
Handle: Reinforced nylon
O-Ring: PTFE
SPECIFICATIONS
Maximum Pressure Rating: 450 PSI
Maximum Working Temperature: -20 °C to 93 °C
FEATURES AND BENEFITS
• Designed to be mounted in-line
• Provide the space savings necessary
for small lines in fluid applications
TOPRING
2
418
1
Product
No
40.930
40.931
40.933
40.934
Tubing
O.D. in
1/4
5/16
3/8
1/2
1
Tubing
O.D. in
1/4
5/16
3/8
1/2
2
Product
No
40.940
40.941
40.942
40.943
40.944
40.945
40.946
40.947
Tubing
O.D. in
1/4
1/4
1/4
5/16
5/16
3/8
3/8
3/8
Thread
(M) NPT
1/8
1/4
3/8
1/8
1/4
1/4
3/8
1/2
TOPFIT®
POLYMER
miniature BALL VALVEs
WITH PUSH-TO-CONNECT FITTINGS
FEATURES AND BENEFITS
• Compact size
• Provide the space savings necessary for lines
•
•
•
•
in fluid applications
Integrated push-in fittings
Available in standard or relieving types
Standard valves do not have air exhaust
Relieving valves, when closed, discharge residual
pressure
S
65
OUT
IN
3- Directional
Product
No
65.430
65.435
65.440
65.445
65.450
Tubing
O.D. in
1/4
5/16
3/8
3/8
1/2
Thread
(M) NPT
1/4
1/4
1/4
3/8
3/8
APPLICATIONS
Compressed air, vacuum
MATERIALS
Body: PBT / Nickel plated brass
O-Ring: Buna-N/nitrile
SPECIFICATIONS
Maximum Working Pressure: 150 PSI
Vacuum Pressure: 29.5” Hg
Maximum Working Temperature: 0 °C to 60 °C
ball valves
2- Directional
Product
No
65.400
65.405
65.410
65.415
65.420
OUT
IN
2- Directional
Product
No
65.460
65.462
65.463
65.465
3- Directional
Product
No
65.470
65.472
65.473
65.475
Tubing
O.D. in
1/4
5/16
3/8
1/2
relieving ball valve (3 way)
IN
2- Directional
Product
No
65.485
65.495
65.497
65.499
3- Directional
Product
No
65.480
65.490
65.496
65.498
Close
Tubing
O.D. mm
4
6
8
10
Input port
Exhaust
Output port
TOPRING
OUT
419
S
65
SAFETY EXHAUST/LOCKOUT
BALL VALVES with exhaust
FEATURES AND BENEFITS
• These ball valves are designed so the exhaust port
safety
SOLUTION
automatically bleeds down compressed air trapped
between the valve and the machine when the valve is
closed, relieving potentially hazardous stored energy
• Sturdy handle with an 8.4 mm hole for locking the valve with a padlock
• Exhaust is tapped with a (10-32 UNF) thread
LOCKOUT
for mounting mufflers
HOW IT WORKS
ball valves
When the valve is in the OFF position, the exhaust vents residual air
on the downstream side of the valve. This ensures that air-powered
equipment is safe to service.
Air in
Pressure
Air in
Tool side
Pressure
exhaust
y
Pressure
Tool side
et
Saf
APPLICATIONS
Fast, safe de-energizing of pneumatic equipment
Designed for air service only
Exhausts downstream
air when closed
MATERIALS
Body: Brass
Ball: Hard chrome plated brass
Stem Seal and Ball Seat: Reinforced PTFE
Handle: Zinc plated steel with vinyl
SPECIFICATIONS
TOPRING
Maximum Working Pressure: 250 PSI
Maximum Working Temperature: 0 °C to 71 °C
420
Product
No
65.500
65.505
65.510
65.515
65.520
Thread
(F) NPT
1/4
3/8
1/2
3/4
1
Weight
kg
0.18
0.16
0.24
0.38
0.63
kg
The valve can be locked
closed to ensure system
cannot be energized
by mistake
airflo®
safety
VENTING
SOLUTION
SAFETY & LOCK-OUT valves
FEATURES AND BENEFITS
• 3 port/2 position valve relieves downstream
pressure when closed
LOCKOUT
• Can be locked in the closed position
• Can be mounted directly to AIRFLO FRL using
S
65
standard AIRFLO spacers included
• Threaded ports also allow use in-line with other
components
• Accept standard single pad lock or safety lock
for multiple lockout
Product
No
51.270
51.370
51.375
51.470
51.475
Thread
(F) NPT
1/4
1/4
3/8
3/8
1/2
Vent
Port
1/8
1/4
1/4
3/8
3/8
MODULAIR®
VENTING
SAFETY & LOCK-OUT valves
ball valves
• Conform to OSHA Standard 29 CFR Part 10
• Maximum pressure: 150 PSI
Suggested
Muffler
86.600
86.605
86.605
86.610
86.610
safety
SOLUTION
FEATURES AND BENEFITS
• 3 port/2 position valve relieves downstream pressure
when closed
LOCKOUT
• Can be locked in the closed position
• Can be mounted directly to MODULAIR FRL
using standard MODULAIR spacers included
• Threaded ports also allow use in-line with other
components
Product
No
50.781
50.783
50.784
50.785
50.786
50.787
Thread
(F) NPT
1/4
1/4
3/8
1/2
1/2
3/4
TOPRING
• Accept standard single pad lock
• Conform to OSHA Standard 29 CFR Part 10
• Maximum pressure: 300 PSI
421
S
65
high flow Safety
exhaust/lockout valves
The high flow safety lockout valve is a 2-position,
3-way valve that exhausts downstream air when
shifted to the closed position.
FEATURES AND BENEFITS
• Used in systems for compliance with
safety
SOLUTION
Colored bright yellow with a red knob, it is easily
distinguished from other air preparation components.
A standard padlock can be inserted in the hole of
the plunger to lock the unit in a non-flowing position,
keeping it safe for downstream maintenance.
LOCKOUT
OSHA Standard 29 CFR Part 1910
•
•
•
•
•
•
High flow exhaust
Rugged cast Aluminium Alloy body
Durable metal handle
Inline or surface mountable
Safety yellow and red for high visibility
Muffler included
1
ball valves
Normal Operation
- Valve Open
With the handle
pulled outward.
Inlet Port 1 is open
to outlet Port 2 .
Exhaust Port 3
is blocked.
1
2
3
Lockout OperATion
- Valve Closed
With the handle pushed inward.
Inlet Port 1 is blocked.
Outlet Port 2 is open
to Exhaust Port 3 .
1
Muffler
included
65.664 / 65.666
2
3
MATERIALS
TOPRING
Body and Handle: Cast aluminium alloy
Spool: Aluminium
Seals: Buna-N/Nitrile
Spring: Stainless steel
422
TECH TIP
SPECIFICATIONS
Maximum Working Pressure: 250 PSI
Maximum Working Temperature: 0 °C to 71 °C
Product
No
65.650
65.655
65.660
65.662
65.664
65.666
Thread
(F) NPT
1/2
3/4
1
1 1/4
1 1/2
2
Port Size
Exhaust
(F) NPT
3/4
3/4
1 1/4
1 1/4
2
2
Inlet/
Outlet
Flow
SCFM
161
187
375
436
761
918
SCFM
Exhaust
91
93
216
221
1156
1186
In accordance with OSHA Standards, lockout valves are
used during maintenance and service procedures of air
operated equipement. Lockout valves are installed in
pneumatic drop legs or individual pneumatic control lines.
Prior to servicing, the red handle is pressed inward,
blocking pressure and relieving all downstream air
pressure. A padlock is installed through the locking
hasp, preventing accidental actuation during the
maintenance procedure.
Following maintenance, the padlock is removed
and the red handle is pulled outward, returning air
pressure to the system.
SOLENOID BALL VALVEs
S
FEATURES AND BENEFITS
2 WAY - 2 POSITION
A
P
Normally closed
•
•
•
•
•
High reliability, low maintenance
65
DIN connection
Compact design with high flow rates
Low noise
O-ring seal protects coil and valve assembly
from moisture and corrosion for longer life
• Standard with DIN connection coil APPLICATIONS
General purpose applications and process systems
MATERIALS
SPECIFICATIONS
Working Pressure: 7-145 PSI
Maximum Working Temperature: -5 °C to 80 °C
Fluid: Compressed air, water, neutral liquids, hot water
Maximum Pressure: 217 PSI
SOLENOID BALL VALVEs
2 WAY - 2 POSITION
Normally closed
Voltage 110V/60HZ
Product No
65.541
65.551
65.542
65.543
65.544
65.545
Voltage 24 VDC
Product No
65.541.03
65.551.03
65.542.03
65.543.03
65.544.03
65.545.03
Thread
(F) NPT
1/8
1/4
3/8
1/2
3/4
1
Port
Size mm
1.5
2.3
13
13
25
25
Flow
Cv
0.10
0.18
1.00
4.00
8.60
11.00
ball valves
Valve Body: Brass
Seal: Buna-N/Nitrile
Coil Material: Aluminium/plastic
FEATURES AND BENEFITS
•
•
•
•
High reliability, low maintenance
Compact design with high flow rates
Low noise
Double O-ring seal protects coil and valve assembly
from moisture and corrosion for longer life
• DIN connection
• Zero differential pressure design
• Waterhammer-free
®
®
®
General purpose applications and process systems
MATERIALS
Valve Body: Brass
Seal: Buna-N/Nitrile
Coil Material: Polyamide
SPECIFICATIONS
Working Pressure: 1.5-145 PSI
Fluid Temperature Range: -10 °C to 80 °C
Fluid: Compressed air, water, neutral liquids, hot water
Protection Class with Cable Plug: NEMA 4
Voltage
120VAC/60HZ
Product No
65.550
65.555
65.560
65.563
65.565
Voltage
240 VAC/60HZ
Product No
65.550.02
65.555.02
65.560.02
65.563.02
65.565.02
Voltage
12 VDC
Product No
65.550.05
65.555.05
65.560.05
65.563.05
65.565.05
Voltage
24 VDC
Product No
65.550.03
65.555.03
65.560.03
65.563.03
--
Thread
(F)
NPT
1/4
3/8
1/2
3/4
1
Port
Size
in
3/8
3/8
1/2
3/4
1
Flow
Cv
2.4
2.4
4.2
10.5
12.9
TOPRING
APPLICATIONS
423
S
65
AIR-SAVER®
PROGRAMMABLE ball valve
FEATURES AND BENEFITS
• Valve opens slowly to avoid water hammer
in network
• Manual valve opening and closing possible,
in case of a power failure
• Microprocessor controlled (multi cycle 7 day program)
• Each individual day can be programmed according
to specific working day shift requirements
•
•
•
•
•
65.591
Integral lithium battery protects program
Reset Function
Maintenance free
Easy to obtain air in case of overtime work
Large LCD display showing program cycle and
current time
• Compact design - easy to install-easy to program
• No unnecessary start up of compressors during
periods when compressed air is not required
• Allows the possibility to shut off sections of an air system
ball valves
where compressed air isn’t continuously needed
energy saver
fully automatic
solution against air leakage
65.592
SPECIFICATIONS
Maximum Working Pressure: 230 PSI
Maximum Working Temperature: 0 °C to 60 °C
Voltage: 115V / 50/60Hz
Power Consumption: 7W during cycle rotation
The Air-Saver is installed on the air outlet of the air tank. It will automa­tically open just prior to the start of the work
shift, and closes just after the working shift is over.
TECH TIP
90% of air leaks are generated at the production area.
In order to minimize the negative impact of these
leaks the Air-Saver valve will:
COMPRESSED AIR
TO FACTORY
• Automatically OPEN just prior to the work shift
TOPRING
AIR-SAVER
424
• Automatically CLOSE just after the work shift
is over
COMPRESSED
AIR RECEIVER
The content of compressed air within the air tank
will be saved rather than lost through pipe work
leakages.
Product
No
65.591
65.592
Thread
(F) NPT
1
2
Opening /
Closing
Duration
90° / 30 sec
90° / 105 sec
65.593
Product
No
65.593
Description
Remote switch for Air-Saver (16 ft)
Compressed air
can hurt you!
The « Safety brochure »,
available at TOPRING.com
highlights safety and
ergonomic solutions
offered by TOPRING
Visit TOPRING.com
Section « Technical Support »/
Safety Brochure
Information about the
dangers associated with
the use of compressed air
Selection of safety and
prevention products
Ergonomic solutions
for workers
425