Drum Instructions Final

Return Number ______________
Please Call or Email SGM Tactical For This Number
[email protected] 865-980-0510 Ext 104
_________________________________________
City, ST ZIP Code
_________________________________________
Street Address
_________________________________________
Customer Name
Date of Purchase ______________
Purchased from
______________
Type of Malfunction______________
______________________________
______________________________
Warranty Card (required for returns)
IMPORTANT
INFORMATION
(must read before use)
SGM Tactical
Vepr 25 round drum
Instructions and Warranty Information
•
Lifetime Warranty is only valid with warranty card
•
User Manual
•
Trouble Shooting Information
Loading Instructions
Page 2
Use Only 2¾” Shells Over 1300 fps
1. Load the drum one shell at a time.
Ensure each shell is well seated in
the feed lips.
Trouble Shooting
Page 3
ALWAYS CLEAN YOUR SHOTGUN
Shotgun Shells Are Very Dirty And They Will Start
To Foul Your Gas System At 75-100 Shells.
The bolt will not go forward and chamber a shell.
2. Press down and hold the shell in
place while you load the next
Shell.
3. Once your drum is loaded, lock
your bolt to the rear and engage
Check Your Last Round Bolt Hold Open On Your Shotgun. Some Veprs
have Shorter or Longer LRBHO’s . The Drum Or Your Shell May Be Lifting
The LRBHO. A Simple File Used On The Drum Can Fix This Problem.
Please Email [email protected] For Detail Instructions
and Photos.
Failure to feed and failure to extract/eject shell.
the safety.
4. Insert the drum into the magazine
well and ensure you have a good
Remove The Drum And Ensure Your Shell Moves Freely In The Drum By
Pressing Down On The Top Shell And Releasing Quickly. (If The Shell
Moves Freely, Clean Your Gas System and Blow The Carbon Out Of Your
Gas Block With Pressurized Air.)
lock. (The drum will break in and become
much easier to load. 4-5 uses should do it ,
flipping the shotgun upside down the first
Shells are failing to rotate with the carousel in the
drum.
few times will make this easier)
5. Point the shotgun down range and
release the bolt. (Ensure you have a
Please Refer To Care, Cleaning, Disassembly And Assembly Instructions:
Email [email protected] For A Detailed PDF Document
With Instructions on Care and Cleaning, If it’s Not Already Provided With
Your Drum.
good feed on the first round in the
chamber)
Broken part repair and replacement
6. You’re ready to fire. (Range
Safety Rules Always Apply!)
7. DO NOT CONDUCT COMBAT
SGM Tactical’s Vepr 12 Drum Was Made To Be Easily Disassembled
and Assembled To Facilitate Maintenance. Please Email
[email protected] For Replacement Parts
and Information.
RELOADS AND DROP THE
DRUM.
The Most Important Thing For Outstanding
Performance Is A Clean Gas System And A Well
Maintained Shotgun.