Vaughn Eames-Smart Class
AUDIO VISUAL TRAINING
Smart Class
SMART CLASS EQUIPMENT
LCD Projector/Built In Screen
Control Panel
Credenza
(DVD/VCR & P.C. inside)
Smart Class
TURNING ON A/V SYSTEM
Use the key provided to you
by your department head to
unlock the credenza.
Smart Class
TURNING ON A/V SYSTEM
*Make sure Master Switch is
on inside the credenza.
*Master Switch will light up red if it is in the ON position. Master Switch should never be turned off.
Smart Class
TURNING ON A/V SYSTEM
Press the “ON” button located
on the bottom right hand side of
the control panel and the
projector will begin turning on.
Smart Class
TURNING ON A/V SYSTEM
Please note, if you’re touch pad
is not working, there will be a
remote inside the credenza. The
green button on all remotes will
turn on your projector.
Smart Class
TURNING ON A/V SYSTEM
Press the “ON” button located
in the center of the computer
to turn it on.
Pull out mouse and keyboard
from drawer above the P.C.
You’ll find the monitor built
into the Credenza above the
keyboard.
Smart Class
PROJECTING A COMPUTER
To display the computer, press
the “Input” button on the
control panel until the
projector reads “Input A” on
the top corner of the screen.
*If using a remote, press “INPUT” button until you see “INPUT A” on the screen.
Or press button labeled “Input A” or “Input 1”.
Smart Class
PROJECTING A COMPUTER
To adjust the volume coming
from your *computer press the
“VOL +” and “VOL -” buttons on
the control panel.
*Please note, volume must also be turned up on your P.C. to receive sound.
Smart Class
PROJECTING A DVD
To play a DVD or VHS open the
compartment on the right hand
side of the credenza and pull
out the DVD/VCR combo player
located inside.
Smart Class
PROJECTING A DVD
To play a DVD, turn on your
DVD/VCR combo player by
pressing the “Power” button on
the bottom left hand corner of
the player.
Smart Class
PROJECTING A DVD
• Press the Eject button next to
the DVD player to open it.
• Place DVD in player with
label up.
• Push the Eject button again
to close and load the DVD
player.
Smart Class
PROJECTING A DVD
Press the “DVD” button on the
control panel to have projector
display the DVD player.
If there is no “DVD” button
press the “INPUT” button until
the projector displays the word
“VIDEO” on the top corner of
the screen.
*If using a remote, press “INPUT” button until you see “VIDEO” on the screen.
Or press button labeled “VIDEO” or “Input 3”.
Smart Class
PROJECTING A DVD
There are 3 ways to control your DVD:
1. Use control buttons located on
the control panel.
2. Use control buttons located on the
DVD player itself.
3.Use the remote control located in
the compartment with the player.
Smart Class
PLAYING A DVD
To adjust the volume coming
from the DVD press the
“VOL +” and “VOL -” buttons on
the control panel.
Smart Class
PLAYING A DVD
To stop the DVD press the STOP
button located on the bottom
left hand corner of the DVD
player.
Press the “Eject” button to
retrieve your DVD.
Smart Class
PROJECTING A VHS
To play a VHS, turn on your
DVD/VCR combo player by
pressing the “Power” button on
the bottom left hand corner of
the player.
Smart Class
PROJECTING A VHS
Put your VHS tape into the slot
on the right hand side of the
player.
Smart Class
PROJECTING A VHS
Press the “VCR” button on the
control panel to have projector
display the VHS tape.
If there is no “VCR” button,
press the “INPUT” button until
the projector reads “VIDEO” on
the top corner of the screen.
*If using a remote, press “INPUT” button until you see “VIDEO” on the screen.
Or press button labeled “VIDEO” or “Input 3”.
Smart Class
PROJECTING A VHS
There are 3 ways to control your VHS:
1. Use control buttons located on
control panel.
2. Use control buttons located on the
VCR player itself
3.Use the remote control, located in
the compartment with the DVD/VCR.
Smart Class
PROJECTING A VHS
To adjust the volume coming
from the VHS press the
“VOL +” and “VOL –” buttons on
the control panel.
Smart Class
PROJECTING A VHS
To stop the VHS press the STOP
button located on the bottom
left hand corner of the VCR.
Press the “Eject” button to
retrieve your VHS.
Smart Class
TURNING OFF THE A/V SYSTEM
To turn off the A/V System press
the “OFF” button located on the
control panel twice.
*If using a remote, press green “Power” button twice, or press “Off” Button twice.
Smart Class
TURNING OFF THE A/V SYSTEM
Turn off the P.C. and DVD /VCR
player and you have completed
shutting down the A/V system.
Please place back all items
removed from the credenza.
(remotes, mouse/keyboard, etc.)
Smart Class
TURNING OFF A/V SYSTEM
Use the key provided to you
by your department head to
lock the credenza.
Smart Class
AUDIO VISUAL CONTACT INFO
• Office Phone: Ext. 76120
• Office Email: [email protected]
• Office Location: Technology Building Room 110
• Office Website: http://www.kean.edu/~avt/
This presentation was created by Katherine Roba
[email protected] ~ 908 737 6122