Intensiv Cavishape Set, Intensiv Cavishape Set S
University of Bern, Switzerland
Oscillating diamond files for finishing preparation margins
It is highly important in the
preparation and finishing of cavity
margins that the surfaces be fully
smooth and even. Both in vivo and
in vitro studies have demonstrated
that Cavishape files are superior to
standard hand tools (“axial cavity
trimmers“) and even to vibratory
instruments – they help prevent
enamel fractures. Preparation margins
finished with Cavishape files are
precise while adjacent teeth are
preserved.
Product description
nHighly flexible, 45° tip angle, onesided diamond coated files
n2 widths (1 and 1.5mm) and 2 grits
(40 and 25µm)
nRigid files (Set “S”) 90° tip angle,
in 1.5mm width and 2 grits (40 and
25µm)
To be used in combination with KaVo
head 61 LRG or KaVo contra-angle
Intracompact 2061 CHC.
Indications
Finishing of box preparations (Class II)
nSlots, minifillings, fillings
nAdhesive restorations (ceramic,
composite)
nCerec preparations (especially Set S)
Benefits
nPrecise, preserving finishing of
preparation margins
nSmooth homogeneous preparation
surfaces
nNo iatrogenic damages to the
adjacent teeth
Intensiv Bevelshape Set
University of Bern, Switzerland
Oscillating diamond files for perfect bevelled edges and preparation margins
A key factor for an ideal cavity
preparation for composite fillings, gold
inlays and overlays is a precise margin
beveling with sharp edges. In the case
of prosthetic restorations, the margin
finishing of shoulder preparations and
the bevelling of chamfer preparations
are decisive for the quality of the
result. The single-side diamond
coating helps to prevent iatrogenic
damage to adjacent teeth and injury
to periodontal tissue.
­62
Product description
nAxially curved files with distally bent
ends
n3 files diamond-coated over the
entire convex working length in
grits 40µm / 25µm / 15µm
n3 files diamond-coated over the
convex distal end only in grits
40µm / 25µm / 15µm
To be used in combination with KaVo
head 61 LRG or KaVo contra-angle
Intracompact 2061 CHC.
Indications
nMargin bevelling for
-Anterior composites
-Composite slots
-Inlays and onlays
nMargin finishing in veneer
preparations
nCrown preparations
-Margin finishing in chamfer
preparation
-Bevelling in shoulder preparation
Benefits
nPerfectly polished and clearly
outlined profiles with perfect sharp
cut edges
nNo microfractures and no
unforeseen chipping of dental
enamel prisms
nPrevention of enamel defects and
grooves on the preparation margin
nNo iatrogenic damages to adjacent
teeth
Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | [email protected]
1
2
3
4
1+2) Contouring of the round internal
angles 3) Visible flexibility of the file
during use 4) Opened cavity prepared
with rotating instruments 5) Finished
cavity margins with Cavishape
5
Cavishape Set
1
Cavishape Set S
2
3
4
5
1+2) Perfect adaptation of the file
to the cavity wall and ground 3) The
file allows the bevelling of a cervical
shoulder, as well 4) Margin finishing
in veneer preparation with BS40 or
BS40T 5) Margin bevelling in class IV
restorations
Intensiv SA | CH-6926 Montagnola | Tel. +41 91 986 50 50 | Fax +41 91 986 50 59 | [email protected]
63