General Description of CMSD
Cam Unit
Die Mounted Cam Unit
FOR PIERCE
UMounting width are 52mm and 90mm.
UStructure to ease removal of spring
UAvailable angle is 0° to 20°(52 in width) , 0°
qCMSD Structure and Assembly / Disassembly
a
to 15°(90 in width) and the travel is 55mm.
t
q
r
qCMSD Specifications
Mounting Surface
W
H
Woring
Angle
Travel
Working Force kN (tonf )
Standard Working Force Allowable Working Force
(one million strokes)
(300,000 strokes)
Spring Force
N (kgf )
w
00
05
52
10
75
55
19.6(2.0)
39.2(4.0)
606.7(62.1)
55
38.2(3.9)
76.4(7.8)
1213.4(124.2)
15
20
00
05
90
82
10
15
tDisassembly
method of CMSD
1) Remove hexagon socket head bolt ( a ) and pull guide bar (t) from cam holder (w) 30 mm to
the rear. Remove the guide bar and cam slide(tqr).
2) Pull and remove the guide bar from the cam slider.
20
qOption of CMSD
YKey Specification(-K)
qKey
Specification
CMSD52
h9
h14
32 −0.01
−0.03
25
3
method of CMSD
1) Assemble components in the reverse order of disassembly.
YMake sure that there is no foreign matter on the sliding area and assemble components.
YThe clearance between the guide bar/cam slider and the cam holder is controlled. Match the
stamped serial number on the holder and slider before assembly.
YWhen cam is disassembled and then reassembled, please do not forget to assemble all bolts
provided
30°
2
14
9
50
16a0.1
9
20 −0.01
−0.03
nt surface is extended
n the range of 0 to 65 mm
ments of 1 mm).
nting surface width (W) is
within the range 53 mm mm increments).
CMSD90
LKU32-50(with 2-M8p15 bolts)
14
50
25
h9
d key is attached.
ssembled to the main unit.)
(Quantity:
2)
bolts)
LKU20-50(with
2-M8p15
30ﾟ
h14
pecification
tAssembly
1713
1714
Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.
1713-1732-eng.indd 1713-1714
Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.
15/03/04 11:02
Cam Unit
Die Mounted Cam Unit
FOR PIERCE
CMSD90 ｰ 00 ｰ 55
qCam Diagram
160
C
65.546
50°
45a0.05
6.3
y
6.3
Option
2-h13H7
K
WC
N12
90(W)
Order
82
6.3
38
0°(K)
15
145
100a0.02
o
4-h13-h20
0
C1
4-
45a0.05
6.3
60a0.02
r!6
50
90
t !0
Travel
S
CMSD
90
00
55
24.9
(K)
–
–
00
S
55
For detailed specification of
the key, refer to page 1713.
Specification
Dedicated key is attached.
(It is not assembled to the main unit.)
The mounting surface width (W) is
changed within the range 91 mm - 150 mm
(1 mm increments).
Dowel pin holes of cam holder and cam
driver are changed to h12H7.
qSpace for removing
30
CMSD90 – 00 – 55 – WC120
CMSD90 – 00 – 55 – K
Refer to page 559 for detailed specifications of
tapped holes and dowel pin holes (prepared
hole, finish hole) for retainer.
25
40
27
182
5
5.5
20
7
C
w
–
–
(K)
Position of piercing center to be set within cam
width.
WC(Max150)
220
5
(W)
90
(W)
6.3
5.5
5
C
6.3
1213.4
(124.2)
Option Code
q
236
6.3
170.6
(17.5)
Catalog No.
CMSD
4-h13-h20
160a0.02
e
Order
76.4
(7.8)
Catalog No.
55
32H7
35a0.05
38.2
(3.9)
10
4-
50
90
120a0.05
6.3
15
32
Working Force kN(tonf)
Spring Force N(kgf)
Total
Standard
Allowable
Weight
Working Force Working Force Initial Load Final Load
kg
(one million strokes) (300,000 strokes)
210
qSpring Diagram
qTable of Components
No.
Description
Qty Material and Remark
q
w
e
r
t
y
o
!0
!6
Cam Slider(Upper)
Cam Holder
Cam Driver
Cam Slider(Lower)
Guide Bar
Positive Return Follower
Coil Spring
Stopper
Spring Plug
1
1
1
1
1
2
2
2
2
FC250
FC250
FC250 with Graphite
FC250 with Graphite
SCM440 with Graphite
S45C(1045)
SWS26-150
Urethane
SAE1065 NH8
Bolts for assembly are not indicated.
(Stripping Force at punch retraction of 5mm)
Spring used
SWS26-150 (2 piece)
Spring constant
9.48N/mm(0.97kgf/mm)
tGuideline of spring durability
500,000 strokes
t
t
Final 1213.4
Load (124.2)
z : Stripping Force at punch retraction of 5mm
e : Spring return when the punch return is 5mm
z 1118.6
(114.5)
Initial 170.6
Load (17.5)
Length at final load 86
e=5.0
Length at initial load 141
32H7
CMSD
90
2-h13H7
100a0.05
Initial deflection 9
Free length 150
233
1725
1726
Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.
1713-1732-eng.indd 1725-1726
Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.
15/03/04 11:03
Cam Unit
Die Mounted Cam Unit
FOR PIERCE
CMSD90 ｰ 05 ｰ 55
225
15
qCam Diagram
175
120a0.05
59.6
45a0.05
5°
90
50
6.3
45°
Order
55
Option
2-h13H7
32H7
35a0.05
38.2
(3.9)
0
C1
4-
6.3
Working Force kN(tonf)
Spring Force N(kgf)
Total
Standard
Allowable
Weight
Working Force Working Force Initial Load Final Load
kg
(one million strokes) (300,000 strokes)
76.4
(7.8)
Catalog No.
CMSD
K
WC
e
q
y
1213.4
(124.2)
(W)
90
Option Code
4-h13-h20
175a0.02
170.6
(17.5)
N12
251.42
–
–
Catalog No.
(W)
(K)
Travel
S
CMSD
90
05
55
25.9
(K)
–
–
05
S
55
For detailed specification of
the key, refer to page 1713.
Specification
qSpace for removing
23
5.5
5
C
Dedicated key is attached.
(It is not assembled to the main unit.)
The mounting surface width (W) is
changed within the range 91 mm - 150 mm
(1 mm increments).
Dowel pin holes of cam holder and cam
driver are changed to h12H7.
6.3
6.3
Order
82
25
40
r!6
!0
t
60a0.02
100a0.02
o
4-h13-h20
0
1
-C
45a0.05
4
50
6.3
5.5
5
C
w
7
CMSD90 – 05 – 55 – WC120
CMSD90 – 05 – 55 – K
Refer to page 559 for detailed specifications of
tapped holes and dowel pin holes (prepared
hole, finish hole) for retainer.
27
166.24
10
20
5
6.3
90
90(W)
)
6.3
5°(K
145
174.52
220
Position of piercing center to be set within cam
width.
WC(Max150)
53.76
15
32
6.3
qSpring Diagram
qTable of Components
No.
Description
Qty Material and Remark
q
w
e
r
t
y
o
!0
!6
Cam Slider(Upper)
Cam Holder
Cam Driver
Cam Slider(Lower)
Guide Bar
Positive Return Follower
Coil Spring
Stopper
Spring Plug
1
1
1
1
1
2
2
2
2
FC250
FC250
FC250 with Graphite
FC250 with Graphite
SCM440 with Graphite
S45C(1045)
SWS26-150
Urethane
SAE1065 NH8
Bolts for assembly are not indicated.
(Stripping Force at punch retraction of 5mm)
Spring used
SWS26-150 (2 piece)
Spring constant
9.48N/mm(0.97kgf/mm)
tGuideline of spring durability
500,000 strokes
t
t
Final 1213.4
Load (124.2)
z : Stripping Force at punch retraction of 5mm
e : Spring return when the punch return is 5mm
z 1118.6
(114.5)
Initial 170.6
Load (17.5)
Length at final load 86
e=5.0
Length at initial load 141
Initial deflection 9
Free length 150
32H7
100a0.05
2-h13H7
CMSD
90
240
1727
1728
Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.
1713-1732-eng.indd 1727-1728
Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.
15/03/04 11:03
Cam Unit
Die Mounted Cam Unit
FOR PIERCE
Working Force kN(tonf)
Spring Force N(kgf)
Total
Standard
Allowable
Weight
Working Force Working Force Initial Load Final Load
kg
(one million strokes) (300,000 strokes)
CMSD90 ｰ 10 ｰ 55
235
15
185
qCam Diagram
120a0.05
6.3
6.3
Option
76.4
(7.8)
K
WC
y
e
q
N12
261.72
5.5
5
C
55.86
15
6.3
x150)
Order
6.3
90(W)
25
60a0.02
40
r!6
!0
100a0.02
o
4-h13-h20
0
C1
4-
50
45a0.05
6.3
t
Travel
S
CMSD
90
10
55
(K)
–
–
10
S
55
For detailed specification of
the key, refer to page 1713.
Specification
Dedicated key is attached.
(It is not assembled to the main unit.)
The mounting surface width (W) is
changed within the range 91 mm - 150 mm
(1 mm increments).
Dowel pin holes of cam holder and cam
driver are changed to h12H7.
qSpace for removing
19
CMSD90 – 10 – 55 – WC120
CMSD90 – 10 – 55 – K
Refer to page 559 for detailed specifications of
tapped holes and dowel pin holes (prepared
hole, finish hole) for retainer.
82
27
7
w
90
5.5
C
5
5
–
–
(K)
27.3
qSpring Diagram
qTable of Components
10
20
6.3
(W)
90
(W)
Position of piercing center to be set within cam
width.
WC(Ma
10°(
K)
164.14
180.63
220
6.3
130
32
6.3
1213.4
(124.2)
Option Code
4-h13-h20
185a0.02
170.6
(17.5)
Catalog No.
CMSD
2-h13H7
32H7
35a0.05
55
Order
10°
45a0.05
50
55
40°
4-
90
38.2
(3.9)
0
C1
Catalog No.
No.
Description
Qty Material and Remark
q
w
e
r
t
y
o
!0
!6
Cam Slider(Upper)
Cam Holder
Cam Driver
Cam Slider(Lower)
Guide Bar
Positive Return Follower
Coil Spring
Stopper
Spring Plug
1
1
1
1
1
2
2
2
2
FC250
FC250
FC250 with Graphite
FC250 with Graphite
SCM440 with Graphite
S45C(1045)
SWS26-150
Urethane
SAE1065 NH8
Bolts for assembly are not indicated.
(Stripping Force at punch retraction of 5mm)
Spring used
SWS26-150 (2 piece)
Spring constant
9.48N/mm(0.97kgf/mm)
tGuideline of spring durability
500,000 strokes
t
t
Final 1213.4
Load (124.2)
z : Stripping Force at punch retraction of 5mm
e : Spring return when the punch return is 5mm
z 1118.6
(114.5)
Initial 170.6
Load (17.5)
Length at final load 86
e=5.0
Length at initial load 141
Initial deflection 9
Free length 150
32H7
2-h13H7
100a0.05
243
CMSD
90
1729
1730
Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.
1713-1732-eng.indd 1729-1730
Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.
15/03/04 11:03
Cam Unit
Die Mounted Cam Unit
FOR PIERCE
Working Force kN(tonf)
Spring Force N(kgf)
Total
Standard
Allowable
Weight
Working Force Working Force Initial Load Final Load
kg
(one million strokes) (300,000 strokes)
CMSD90 ｰ 15 ｰ 55
185a0.02
35a0.05
38.2
(3.9)
76.4
(7.8)
170.6
(17.5)
1213.4
(124.2)
(W)
(K)
Travel
S
CMSD
90
15
55
29.3
4-
C
10
120a0.05
Catalog No.
Catalog No.
CMSD
Option
6.3
32H7
15
Option Code
K
2-h13H7
4-h13-h20
185
WC
235
e
N12
6.3
55
Order
50)
90(W
)
(K)
–
–
15
S
55
25
20
qSpace for removing
9
CMSD90 – 15 – 55 – WC120
CMSD90 – 15 – 55 – K
51.43
55
No.
Description
qSpring Diagram
Qty Material and Remark
q
w
e
r
t
y
o
!0
!6
Cam Slider(Upper)
Cam Holder
Cam Driver
Cam Slider(Lower)
Guide Bar
Positive Return Follower
Coil Spring
Stopper
Spring Plug
1
1
1
1
1
2
2
2
2
FC250
FC250
FC250 with Graphite
FC250 with Graphite
SCM440 with Graphite
S45C(1045)
SWS26-150
Urethane
SAE1065 NH8
Bolts for assembly are not indicated.
15°
45a0.05
50
qCam Diagram
35°
6.3
32H7
4-h13-h20
10
100a0.02
o
4C
5.5
5
C
65a0.05
r!6
40
7
6.3
t
Dedicated key is attached.
(It is not assembled to the main unit.)
The mounting surface width (W) is
changed within the range 91 mm - 150 mm
(1 mm increments).
Dowel pin holes of cam holder and cam
driver are changed to h12H7.
qTable of Components
5
w
For detailed specification of
the key, refer to page 1713.
Specification
Refer to page 559 for detailed specifications of
tapped holes and dowel pin holes (prepared
hole, finish hole) for retainer.
6.3
6.3
Max1
82
160.97
6.3
10
188.4
!0
WC(
27
120
15
15°(K)
64.03
15
32
5
6.3
90
–
–
Position of piercing center to be set within cam
width.
C
6.3
q
y
5.5
260.82
225
(W)
90
50
90
Order
(Stripping Force at punch retraction of 5mm)
Spring used
SWS26-150 (2 piece)
Spring constant
9.48N/mm(0.97kgf/mm)
tGuideline of spring durability
500,000 strokes
t
t
Final 1213.4
Load (124.2)
z : Stripping Force at punch retraction of 5mm
e : Spring return when the punch return is 5mm
z 1118.6
(114.5)
Initial 170.6
Load (17.5)
Length at final load 86
e=5.0
Length at initial load 141
Initial deflection 9
Free length 150
100a0.05
2-h13H7
248
CMSD
90
1731
1732
Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.
1713-1732-eng.indd 1731-1732
Copyright © Sankyo Oilless Industry, Inc. All Rights Reserved.
15/03/04 11:03