Lunar Platform (Queen/King Bed Frame)
assembly instructions
PARTS INCLUDED
A
B
ALLEN HEAD SCREW
(16 pcs) - 1/4”x 5/8”
E
C
ALLEN HEAD SCREW
(2 pcs) - 1/4”x 11/2”
F
ADJUSTABLE SUPPORT
LEG - (2 pcs)
D
FLAT WASHER
(18 pcs) - ¼”
G
ALLEN WRENCH
(1 pc) - ¼”
PLASTIC CAP (ONE END)
(24 pc)
SPRING WASHER
(16 pcs) - ¼”
H
WOOD SLATE
(12 pc)
LEG
(4 pcs)
SIDE RAIL
(2 pcs)
SHORT RAIL
(2 pcs)
MIDDLE RAIL
(1 pc)
PAGE 1 OF 2
Lunar Platform (Queen/King Bed Frame)
assembly instructions
BED FRAME ASSEMBLY
STEP 2
STEP 5
G
C
D
A
H
STEP 3
C
STEP 1
B
C
D
E
A
STEP 1
Assemble each leg with 2 Allen head screws (5/8”) A , 2 spring washers D and 2 flat washers C . Do not tighten screws.
STEP 2
Turn the bed frame upright. Insert the middle rail into the pin on the short rail and snap into place. Assemble short rail to side
rail with 2 Allen head screws (5/8”) A , 2 spring washers D and 2 flat washers C for each end. Do not tighten screws.
STEP 3
Assemble each adjustable support leg E with 1 Allen head screw (1-1/2”) B and 1 flat washer C .
STEP 4
Tighten the screws from Step 1 to 3 using the Allen wrench F .
STEP 5
Assemble plastic caps G and wood slates H . Insert plastic caps G into holes on rail and push in.
PAGE 2 OF 2