Price List
Effective: December 18, 2012
Prices & Specs Subject to Change
BEL 150 Options
Machine Price
Semi Automatic Case Tape Sealers
Part ID
BEL 150US-TB
BEL 150-US
Item
Semi-Automatic Case
Tape Sealer – T&B
Semi-Automatic Case Tape
Sealer - TOP
Desc
US
Side Belt Unidrive Top & Bottom Sealer.
Equipped with two DEKKA 22 tape heads.
Anodized Aluminum Frame.
$6,995.00
Side Belt Unidrive Top-Only Sealer Equipped with
one DEKKA 22 tape head. Anodized Aluminum
Frame.
$6,450.00
Accessory Options
Part ID
Item
Desc
US
Z70-040
BOX STAND, KDF, FOR
KDF Box Stand for corrugated case blanks
Holds up to 50 cases for convenient one-at-a-time
selection. Easy height adjustment.
$598.00
Z70-089
BLANK, BOT TAPE HD,
150-250/2 TOP ONLY
Bottom Tape Head Blank BEL 150-252.
Replaces bottom tape head for top-only taping.
$150.00
Casters
Machines come standard with UHMW footpads on zinc plated steel leg extension screws for adjusting
machine height [SS machines have stainless screws]. Casters options use polyurethane whe els with
combined wheel and swivel locks mounted on threaded leg extensions.
Part ID
Item
Desc
US
Z70-003
UHMW FOOT PADS WITH SS
LEG EXT 12" STD
UHMW foot pads with stainless steel leg
extension screws (Set/4)
$345.00
Z70-325
PLATED LOCK CASTERS
WITH MS LEG EXT 12"
Locking Casters, 4" diameter, zinc plated steel
bodies and plated leg extension screws (Set/4)
$345.00
Z70-004
PLATED LOCK CASTERS
WITH SS 12" LEG EXT.
4" diameter with zinc plated steel bodies and
stainless steel leg extension screws (Set/4)
$535.00
Z70-291
SS LOCK CASTERS WITH SS
LEG EXT 12"
S.S. Locking Casters with S.S. Leg Extensions
4" diameter with stainless steel bodies (Set/4)
$925.00
Machine Mounting Bases
Sub-bases are available for some BEL machines to raise their operating level to custom heights or tilt
them toward the operator for more ergonomic handling of awkward cases.
Part ID
Z70-106
64-02-05
Item
SUB-BASE, HT EXT, 'S' 150
Desc
Height Extension Sub-Base 150 - fits underneath
standard machine legs for in/outfeed or pass
heights greater than 32" [813mm] on pads or 38"
[965mm] on casters.
Wexxar Packaging Inc.
A Pro Mach Operating Partner
US
$1,190.00
7/14/2017
Price List
Effective: December 18, 2012
Prices & Specs Subject to Change
Ergo-Level Options
The Ergo-Level system is a set of adjustable height legs that are mounted to the existing machine frame
legs. They allow it to be raised or lowered to suit operator or line height and for it to be inclined, if desired,
for greater versatility. See Specification sheet 67-67 for more detail.
Part ID
Item
Desc
US
Z70-520
ERGO LEVEL, V.04, PADS,
150 / 252
Ergo-Level [22" Infeed Frame] with swivel foot
pads
Consult
Factory
Z70-519
ERGO LEVEL, V.04,
CASTERS, 150 / 252
Ergo-Level [22" Infeed Frame], Casters
With 3" dia. polyolefin wheel casters having zinc
plated bodies and wheel locks [only]
Consult
Factory
Z70-620
ERGO LEVEL,W/505 MT,150 /
252
Ergo-Level , BEL 150-1/ 252 with 505 Sealer
Mount. Combines Ergo-Level legs with the BEL
505 sealer mounting kit Z70-378 as a package
Consult
Factory
BEL 505 Mounting
Mounts and supports a BEL 505 Packing Station directly on a standard BEL side belt sealer frame, making
the pair of machines a single unit for moving on casters, mounting on Ergo-Level legs or a sealer side-tilt
sub-base.
Part ID
Item
Desc
US
Z70-606
MT KIT, 505 G3 SEALER
CANTILEVER MOUNT
BEL 505 G3 Sealer mount kit for the BEL 505 G3
Versa-Pack Packing Station
$665.00
Z70-378
MT KIT, 505 SEALER
CANTILEVER MT,150
BEL 505 Sealer mount kit for standard size BEL
505
$665.00
Z70-395
MT KIT, 505S SEALER
CANTILEVER MT150
BEL 505S Sealer mount kit for the BEL 505S
small case] Packing Station
$665.00
Overfilled Case Compression
Case compression items help manage case distortion and improve the sealing of cases containing soft or
compressible overfilled product.
Part ID
Z70-007
64-02-05
Item
CASE TOP SIDE COMP, 150
Desc
Case top side [compression] rollers 150 - guide,
stabilize and exert mild overfill side compression
under the top tape head. NOTE: Changes
minimum case height to 6”.
Wexxar Packaging Inc.
A Pro Mach Operating Partner
US
$335.00
7/14/2017
Price List
Effective: December 18, 2012
Prices & Specs Subject to Change
Modification Options
Stainless Steel Machine Adjusting Screws
Stainless Steel Acme screws mounted with stainless ball bearings in stainless housings or machine case
width and height adjustments. Pricing is for upgrade at the time of a new machine order only.
Part ID
Item
Desc
US
Z300-002
SS WIDTH ADJ. LEAD
SCREWS, 150-450 UPGRD
Stainless steel Acme screws [2] with Delrin nuts
for side belt conveyor case width adjustment.
Pricing is for upgrade at the time of a new
machine order only.
$1,245.00
Z300-004
SS HEIGHT ADJ. LEAD
SCREWS 150,252,450
Stainless steel Acme screws [2] for case height
adjustment-[BEL 150/252]/450
$655.00
Oversize and Undersize Case Modifications
Various modifications can be made to BEL machines that enable them to handle cases smaller or larger
than the standard range (See also ‘X’ models for oversize cases). NOTE: The options and prices shown
below are a guide to pricing for SINGLE MODIFICATIONS ONLY. If more than one modification is
required, a complete description of the application with all cases sizes needs to be submitted to the factory
for quotation.
Part ID
Item
Desc
US
Z300-1506
U/L UNDERLENGTH BOX
SIZE MIN. 6" 150
Minimum length 6" / 152mm
$615.00
Z300-1504
U/W UNDERWIDTH MIN 4.25"
CASE, BEL150/1
Minimum width 4.25" / 108mm [minimum width
capability may be limited by height of the case]
$580.00
Z300-1513
O/H OVERHEIGHT 25" MAX.
CASE, BEL 150
Over-height Case BEL 150 / 450 Maximum case
height 25.5" / 648mm
$645.00
Electrical Options
Standard voltage is 120 VAC, 60 Hz. Single-phase, NEMA 12 except for SS Models which are NEMA 4X.
Common electrical options are listed below:
Part ID
Item
Desc
Z300-145
E.150/151,120V,1PH, NEMA 4
OPTION
120VAC, 60Hz, single-phase NEMA 4 Electrics for
BEL150/151 Wash-down rated conveyor drive
motor and additional sealing of connections
64-02-05
Wexxar Packaging Inc.
A Pro Mach Operating Partner
US
$1,065.00
7/14/2017
Price List
Effective: December 18, 2012
Prices & Specs Subject to Change
Dekka
General
Standard Dekka 22 Tape Heads can be replaced by a variety of alternative configurations. “Replacement
refers to upgrade pricing to exchange standard heads for alternative models on new machines only.
Part ID
Item
Desc
US
Z300-061
DEKKA 23 - SINGLE HEAD
UPGRADE
Replacement of Standard DEKKA 22 with DEKKA
23 (price per head)
$570.00
Z300-064
DEKKA 215 - SINGLE HEAD
UPGRADE
Replacement of standard DEKKA 22 with DEKKA
215 tape head for under-height case modifications
and / or shorter tape tail (price per head)
$570.00
Z59-010
DEKKA 22, STD 2" WIDTH
Spare DEKKA 22 2" tape head cartridge with
quick loading and exclusive "No Break" tape
features
$1,300.00
Spare Parts Kits
General
Spare Parts Kits are a collection of the most commonly needed parts. Each part is conveniently labeled.
Part ID
Item
Desc
US
Z70-010
SPARES KIT, 150/151 STD
BEL 150 Spare Parts Kit. (NOTE: Price will vary
for non-standard belts.)
$720.00
Z79-007
SPARES KIT, DEKKA 22 /ST
DEKKA 22 Tape Head Spare Parts Kit
$363.00
64-02-05
Wexxar Packaging Inc.
A Pro Mach Operating Partner
7/14/2017
Price List
Effective: December 18, 2012
Prices & Specs Subject to Change
BEL 150X Options
Machine Price
Semi Automatic Case Tape Sealers
Part ID
Item
Desc
BEL150XUS-TB
Large Case Semi-Automatic
Tape Sealer
BEL 150X Side Belt Unidrive Top and Bottom
Sealer for larger cases. Equipped with two
DEKKA 22 tape heads. Anodized Aluminum
Frame.
BEL150X-US
Large Case Semi-Automatic
Tape Sealer
BEL 150X Side Belt Unidrive Top-Only Sealer for
larger cases. Equipped with one DEKKA 22 tape
head. Anodized Aluminum Frame.
US
$10,250.00
$9,705.00
Accessory Options
General
Part ID
Item
Desc
US
Z70-040
BOX STAND, KDF, FOR
KDF Box Stand for corrugated case blanks
Holds up to 50 cases for convenient one-at-a-time
selection. Easy height adjustment.
$598.00
Z70-089
BLANK, BOT TAPE HD,
150-250/2 TOP ONLY
Bottom Tape Head Blank BEL 150-252.
Replaces bottom tape head for top-only taping.
$150.00
Casters
Machines come standard with UHMW footpads on zinc plated steel leg extension screws for adjusting
machine height [SS machines have stainless screws]. Casters options use polyurethane wheels with
combined wheel and swivel locks mounted on threaded leg extensions.
Part ID
Item
Desc
US
Z300-022
LEG EXT, PADS, 12"SS
SET+8" SCREW
UHMW Foot Pads with SS Leg Extensions
UHMW foot pads with stainless steel leg
extension screws (Set/4)
$345.00
Z300-021
LEG EXT, CASTER,MS 12
SCR+8" SCREW
Locking Casters, 4" diameter, zinc plated steel
bodies and plated leg extension screws (Set/4)
$345.00
Z300-020
PLATED LOCK CASTERS 12"
SET+8" SCREW
Plated Locking Casters and SS Leg Extensions
4" diameter with zinc plated steel bodies and
stainless steel leg extension screws (Set/4
$535.00
Z300-023
SS CASTERS W/ 12" SS
EXT+8" SCREW
S.S. Locking Casters with S.S. Leg Extensions
4" diameter with stainless steel bodies (Set/4)
$925.00
64-02-05
Wexxar Packaging Inc.
A Pro Mach Operating Partner
7/14/2017
Price List
Effective: December 18, 2012
Prices & Specs Subject to Change
Ergo-Level Options
The Ergo-Level system is a set of adjustable height legs that are mounted to the existing machine frame
legs. They allow it to be raised or lowered to suit operator or line height and for it to be inclined, if desired,
for greater versatility. See Specification sheet 67-67 for more detail.
Part ID
Item
Desc
US
Z70-349
ERGO LEVEL,
V.04,PADS,150/1X,252X
Ergo-Level [18" Frame Infeed, ‘X’ Width] with
swivel foot pads
$2,885.00
Z70-439
ERGO LEVEL,
V.04,CASTERS
150/1X,252X
Ergo-Level [18" Frame Infeed, ‘X’ Width] with 3"
dia. polyolefin wheel casters having zinc plated
bodies and wheel locks [only]
$2,885.00
Z70-623
ERGO-LEVEL, 'X' W/505 M
Ergo-Level, 'X' Width with 505-20" mount
Combines Ergo-Level legs with the BEL 505-20"
mount Z300-035/036 as a package
$3,700.00
BEL 505 Mounting
Mounts and supports a BEL 505 Packing Station directly on a standard BEL side belt sealer frame, making
the pair of machines a single unit for moving on casters, mounting on Ergo-Level legs or a sealer side-tilt
sub-base.
Part ID
Item
Desc
US
Z70-669
MT KIT, 505 G3 ON 'X'
SEALER 150/1X,252X
BEL 505G3-20" Sealer mount kit
Mounts and supports a BEL 505G3-20" Packing
Station [20" maximum overwidth case version]
directly on the BEL 150X frame, making the pair
of machines a single unit for moving on casters or
mounting on Ergo-Level legs
$815.00
Z70-521
MT KIT, 505 ON SEALER
150/1X,252X
BEL 505-20" Sealer mount kit
Mounts and supports a BEL 505-20" Packing
Station [20" maximum overwidth case version]
directly on the BEL 150X frame, making the pair
of machines a single unit for moving on casters or
mounting on Ergo-Level legs
$815.00
Overfilled Case Compression
Case compression items help manage case distortion and improve the sealing of cases containing soft or
compressible overfilled product.
Part ID
Z70-185
64-02-05
Item
SIDE COMPRESSION, 150X
Desc
Case top side [compression] rollers 150X - guide,
stabilize and exert mild overfill side compression
under the top tape head
Wexxar Packaging Inc.
A Pro Mach Operating Partner
US
$560.00
7/14/2017
Price List
Effective: December 18, 2012
Prices & Specs Subject to Change
Modification Options
Stainless Steel Machine Adjusting Screws
Stainless Steel Acme screws mounted with stainless ball bearings in stainless housings or machine case
width and height adjustments. Pricing is for upgrade at the time of a new machine order only.
Part ID
Item
Desc
US
Z300-006
SS O/H HEIGHT ADJ. LEAD
SCREWS UPGRADE, 150X
Stainless Steel case height adjusting screws 150X
/ 252X Case height adjustment, 'X’ width sealers
$755.00
Z300-008
SS WIDTH ADJ. LEAD
SCREW UGR 150/1X,252X
Stainless Steel case height adjusting screws 150X
/ 252X Case height adjustment, 'X’ width sealers
$1,585.00
Oversize and Undersize Case Modifications
“Various modifications can be made to BEL machines that enable them to handle cases smaller or larger
than the standard range (see also ‘X’ models for oversize cases). NOTE: The options and prices shown
below are a guide to pricing for SINGLE MODIFICATIONS ONLY. If more than one modification is
required, a complete description of the application with all case sizes needs to be submitted to the factory
for quotation”
Part ID
Z300-111
Item
U/W UNDERWIDTH MIN 4"
CASE, BEL150/1
Desc
Minimum width 4" / 102mm [minimum width
capability may be limited by height of the case]
US
$580.00
Electrical Options
Standard voltage is 120 VAC, 60 Hz. Single-phase, NEMA 12 except for SS Models which are NEMA 4X.
[BEL 270 is 220 V. 1-phase] Common electrical options are listed below:
Part ID
Z300-145
Item
E.150/151,450/451
120V,1PH,NEMA 4 OPTION
Desc
120VAC,60Hz, single-phase NEMA 4 Electrics for
BEL150/151, 450/451. Wash-down rated
conveyor drive motor and additional sealing of
connections
US
$1,065.00
Spare Parts Kits
General
Spare Parts Kits are a collection of the most commonly needed parts. Each part is conveniently labeled.
Part ID
Item
Desc
US
Z70-189
SPARES KIT, 150X/151X
BEL 150X / 151X Spare Parts Kit. (NOTE: Price
will vary for non-standard belts.)
$764.00
Z79-007
SPARES KIT, DEKKA 22 /ST
DEKKA 22 Tape Head Spare Parts Kit
$363.00
64-02-05
Wexxar Packaging Inc.
A Pro Mach Operating Partner
7/14/2017